Download or read book Intelligent Automatic Generation Control written by Hassan Bevrani and published by CRC Press. This book was released on 2017-12-19 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Automatic generation control (AGC) is one of the most important control problems in the design and operation of interconnected power systems. Its significance continues to grow as a result of several factors: the changing structure and increasing size, complexity, and functionality of power systems, the rapid emergence (and uncertainty) of renewable energy sources, developments in power generation/consumption technologies, and environmental constraints. Delving into the fundamentals of power system AGC, Intelligent Automatic Generation Control explores ways to make the infrastructures of tomorrow smarter and more flexible. These frameworks must be able to handle complex multi-objective regulation optimization problems, and they must be highly diversified in terms of policies, control strategies, and wide distribution in demand and supply sources—all via an intelligent scheme. The core of such intelligent systems should be based on efficient, adaptable algorithms, advanced information technology, and fast communication devices to ensure that the AGC systems can maintain generation-load balance following serious disturbances. This book addresses several new schemes using intelligent control techniques for simultaneous minimization of system frequency deviation and tie-line power changes, which is required for successful operation of interconnected power systems. It also concentrates on physical and engineering aspects and examines several developed control strategies using real-time simulations. This reference will prove useful for engineers and operators in power system planning and operation, as well as academic researchers and students in field of electrical engineering.
Download or read book Intelligent Automatic Generation Control written by and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Artificial Intelligence in Industrial Decision Making Control and Automation written by S.G. Tzafestas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is concerned with Artificial Intelligence (AI) concepts and techniques as applied to industrial decision making, control and automation problems. The field of AI has been expanded enormously during the last years due to that solid theoretical and application results have accumulated. During the first stage of AI development most workers in the field were content with illustrations showing ideas at work on simple problems. Later, as the field matured, emphasis was turned to demonstrations that showed the capability of AI techniques to handle problems of practical value. Now, we arrived at the stage where researchers and practitioners are actually building AI systems that face real-world and industrial problems. This volume provides a set of twenty four well-selected contributions that deal with the application of AI to such real-life and industrial problems. These contributions are grouped and presented in five parts as follows: Part 1: General Issues Part 2: Intelligent Systems Part 3: Neural Networks in Modelling, Control and Scheduling Part 4: System Diagnostics Part 5: Industrial Robotic, Manufacturing and Organizational Systems Part 1 involves four chapters providing background material and dealing with general issues such as the conceptual integration of qualitative and quantitative models, the treatment of timing problems at system integration, and the investigation of correct reasoning in interactive man-robot systems.
Download or read book AUTOMATIC GENERATION CONTROL IN ELECTRICAL POWER SYSTEM written by Dr. Md. Faruk Hossain and published by LAP Lambert Academic Publishing. This book was released on 2013 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today a power system interruption is far more serious, work is interrupted, and modern domestic heating plants cease operating, the processing material is damaged, transportation is impaired and normal life of whole communities is disrupted. This greater dependence on a continuous supply of electrical energy has developed with the ability to build a high degree of reliability into the system. System disturbances caused by the load fluctuations result in changes to the desired frequency value. Automatic Generation Control (AGC), is very important issue in power system operation and control for supplying sufficient and both good quality and reliable electric power. This work deals with the AGC of Electrical (single and multi-area) power systems by using fuzzy logic controller (FLC). Three intelligent AGC controllers have been developed to regulate the power output and system frequency by controlling the speed of the generator with the help of fuel rack position control. The first one is fuzzy based gain scheduler (FGS), the second one is Fuzzy based proportional integral controller (FPIC), and last one is Fuzzy frequency controller (FFC).
Download or read book Applications of Computing Automation and Wireless Systems in Electrical Engineering written by Sukumar Mishra and published by Springer. This book was released on 2019-05-31 with total page 1296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses key concepts, challenges and potential solutions in connection with established and emerging topics in advanced computing, renewable energy and network communications. Gathering edited papers presented at MARC 2018 on July 19, 2018, it will help researchers pursue and promote advanced research in the fields of electrical engineering, communication, computing and manufacturing.
Download or read book Computational Intelligence in Pattern Recognition written by Asit Kumar Das and published by Springer. This book was released on 2019-08-17 with total page 1046 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents practical development experiences in different areas of data analysis and pattern recognition, focusing on soft computing technologies, clustering and classification algorithms, rough set and fuzzy set theory, evolutionary computations, neural science and neural network systems, image processing, combinatorial pattern matching, social network analysis, audio and video data analysis, data mining in dynamic environments, bioinformatics, hybrid computing, big data analytics and deep learning. It also provides innovative solutions to the challenges in these areas and discusses recent developments.
Download or read book Intelligent Control in Power Generation written by Bassel Bashir Copti and published by . This book was released on 1996 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power systems should be maintained at constant frequency and all the interconnected generators must remain in synchronism. Even though there are changes in the flow of power, voltage magnitudes should remain within assigned ranges at different points of the power grid. The major and most important unit in a power system is the generator. Automatic Generation Control (AGC) is the essential function in controlling the power grid. It consists of controlling the generator's terminal voltage, its output power and frequency. To maintain constant terminal voltage, exciter control is needed To maintain frequency and power within acceptable limits turbine-governor control is needed. An additional feedback controller called the Power System Stabilizer is used to control frequency deviation through the exciter. As the load deviates unpredictably from its normal value, automatic control must detect the changes in the system and initiate a counter control. These actions must eliminate instantly and efficiently the induced state deviations and restore the system to its new steady state operating point. Because of the dynamic nature of the power system, fixed-parameter controllers cannot perform well when the operating points deviate enormously from the design operating point. Since the operating point of a power system changes frequently, the settings of the control parameters will have to be updated to adapt with the new environment introduced by these changes. For this reason intelligent control can improve power system performance. In this thesis, we describe two controlling methods to improve the exciter action in response to voltage deviations. Improved intelligent control schemes were delivered and applied to the Power System Stabilizer to improve its behavior under normal conditions and unpredicted circumstances Our proposed control strategies on the Exciter and Power System Stabilizer do not require large and complex calculations nor very small sampling frequencies.
Download or read book Sustainable Developments by Artificial Intelligence and Machine Learning for Renewable Energies written by Krishna Kumar and published by Academic Press. This book was released on 2022-03-18 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Developments by Artificial Intelligence and Machine Learning for Renewable Energies analyzes the changes in this energy generation shift, including issues of grid stability with variability in renewable energy vs. traditional baseload energy generation. Providing solutions to current critical environmental, economic and social issues, this book comprises various complex nonlinear interactions among different parameters to drive the integration of renewable energy into the grid. It considers how artificial intelligence and machine learning techniques are being developed to produce more reliable energy generation to optimize system performance and provide sustainable development. As the use of artificial intelligence to revolutionize the energy market and harness the potential of renewable energy is essential, this reference provides practical guidance on the application of renewable energy with AI, along with machine learning techniques and capabilities in design, modeling and for forecasting performance predictions for the optimization of renewable energy systems. It is targeted at researchers, academicians and industry professionals working in the field of renewable energy, AI, machine learning, grid Stability and energy generation. Covers the best-performing methods and approaches for designing renewable energy systems with AI integration in a real-time environment Gives advanced techniques for monitoring current technologies and how to efficiently utilize the energy grid spectrum Addresses the advanced field of renewable generation, from research, impact and idea development of new applications
Download or read book Emerging Trends in Electrical Communications and Information Technologies written by T. Hitendra Sarma and published by Springer Nature. This book was released on 2019-09-24 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes original, peer-reviewed research from the 3rd International Conference on Emerging Trends in Electrical, Communication and Information Technologies (ICECIT 2018), held at Srinivasa Ramanujan Institute of Technology, Ananthapuramu, Andhra Pradesh, India in December 2018. It covers the latest research trends and developments in the areas of Electrical Engineering, Electronic and Communication Engineering, and Computer Science and Information.
Download or read book Data Intensive Computing in Smart Microgrids written by Herodotos Herodotou and published by MDPI. This book was released on 2021-09-06 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microgrids have recently emerged as the building block of a smart grid, combining distributed renewable energy sources, energy storage devices, and load management in order to improve power system reliability, enhance sustainable development, and reduce carbon emissions. At the same time, rapid advancements in sensor and metering technologies, wireless and network communication, as well as cloud and fog computing are leading to the collection and accumulation of large amounts of data (e.g., device status data, energy generation data, consumption data). The application of big data analysis techniques (e.g., forecasting, classification, clustering) on such data can optimize the power generation and operation in real time by accurately predicting electricity demands, discovering electricity consumption patterns, and developing dynamic pricing mechanisms. An efficient and intelligent analysis of the data will enable smart microgrids to detect and recover from failures quickly, respond to electricity demand swiftly, supply more reliable and economical energy, and enable customers to have more control over their energy use. Overall, data-intensive analytics can provide effective and efficient decision support for all of the producers, operators, customers, and regulators in smart microgrids, in order to achieve holistic smart energy management, including energy generation, transmission, distribution, and demand-side management. This book contains an assortment of relevant novel research contributions that provide real-world applications of data-intensive analytics in smart grids and contribute to the dissemination of new ideas in this area.
Download or read book Nature Inspired Optimization for Electrical Power System written by Manjaree Pandit and published by Springer Nature. This book was released on 2020-04-07 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a wide range of optimization methods and their applications to various electrical power system problems such as economical load dispatch, demand supply management in microgrids, levelized energy pricing, load frequency control and congestion management, and reactive power management in radial distribution systems. Problems related to electrical power systems are often highly complex due to the massive dimensions, nonlinearity, non-convexity and discontinuity associated with objective functions. These systems also have a large number of equality and inequality constraints, which give rise to optimization problems that are difficult to solve using classical numerical methods. In this regard, nature inspired optimization algorithms offer an effective alternative, due to their ease of use, population-based parallel search mechanism, non-dependence on the nature of the problem, and ability to accommodate non-differentiable, non-convex problems. The analytical model of nature inspired techniques mimics the natural behaviors and intelligence of life forms. These techniques are mainly based on evolution, swarm intelligence, ecology, human intelligence and physical science.
Download or read book Smart Computing written by Mohammad Ayoub Khan and published by CRC Press. This book was released on 2021-06-22 with total page 926 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of SMART technologies is an interdependent discipline. It involves the latest burning issues ranging from machine learning, cloud computing, optimisations, modelling techniques, Internet of Things, data analytics, and Smart Grids among others, that are all new fields. It is an applied and multi-disciplinary subject with a focus on Specific, Measurable, Achievable, Realistic & Timely system operations combined with Machine intelligence & Real-Time computing. It is not possible for any one person to comprehensively cover all aspects relevant to SMART Computing in a limited-extent work. Therefore, these conference proceedings address various issues through the deliberations by distinguished Professors and researchers. The SMARTCOM 2020 proceedings contain tracks dedicated to different areas of smart technologies such as Smart System and Future Internet, Machine Intelligence and Data Science, Real-Time and VLSI Systems, Communication and Automation Systems. The proceedings can be used as an advanced reference for research and for courses in smart technologies taught at graduate level.
Download or read book Applications of Robotics in Industry Using Advanced Mechanisms written by Janmenjoy Nayak and published by Springer Nature. This book was released on 2019-09-03 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shares important findings on the application of robotics in industry using advanced mechanisms, including software and hardware. It presents a collection of recent trends and research on various advanced computing paradigms such as soft computing, robotics, smart automation, power control, and uncertainty analysis. The book constitutes the proceedings of the 1st International Conference on Application of Robotics in Industry using Advanced Mechanisms (ARIAM2019), which offered a platform for sharing original research findings, presenting innovative ideas and applications, and comparing notes on various aspects of robotics. The contributions highlight the latest research and industrial applications of robotics, and discuss approaches to improving the smooth functioning of industries. Moreover, they focus on designing solutions for complex engineering problems and designing system components or processes to meet specific needs, with due considerations for public health and safety, including cultural, societal, and environmental considerations. Taken together, they offer a valuable resource for researchers, scientists, engineers, professionals and students alike.
Download or read book Computational Intelligence in Data Mining Volume 1 written by Lakhmi C. Jain and published by Springer. This book was released on 2014-12-10 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: The contributed volume aims to explicate and address the difficulties and challenges for the seamless integration of two core disciplines of computer science, i.e., computational intelligence and data mining. Data Mining aims at the automatic discovery of underlying non-trivial knowledge from datasets by applying intelligent analysis techniques. The interest in this research area has experienced a considerable growth in the last years due to two key factors: (a) knowledge hidden in organizations’ databases can be exploited to improve strategic and managerial decision-making; (b) the large volume of data managed by organizations makes it impossible to carry out a manual analysis. The book addresses different methods and techniques of integration for enhancing the overall goal of data mining. The book helps to disseminate the knowledge about some innovative, active research directions in the field of data mining, machine and computational intelligence, along with some current issues and applications of related topics.
Download or read book Microgrid Dynamics and Control written by Hassan Bevrani and published by John Wiley & Sons. This book was released on 2017-07-18 with total page 799 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses relevant microgrid technologies in the context of integrating renewable energy and also addresses challenging issues. The authors summarize long term academic and research outcomes and contributions. In addition, this book is influenced by the authors’ practical experiences on microgrids (MGs), electric network monitoring, and control and power electronic systems. A thorough discussion of the basic principles of the MG modeling and operating issues is provided. The MG structure, types, operating modes, modelling, dynamics, and control levels are covered. Recent advances in DC microgrids, virtual synchronousgenerators, MG planning and energy management are examined. The physical constraints and engineering aspects of the MGs are covered, and developed robust and intelligent control strategies are discussed using real time simulations and experimental studies.
Download or read book Recent Advances in Manufacturing Automation Design and Energy Technologies written by Sendhil Kumar Natarajan and published by Springer Nature. This book was released on 2021-10-11 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the proceedings of the 1st International Conference on Future Technologies in Manufacturing, Automation, Design and Energy 2020. The contents of this volume focus on recent technological advances in the field of manufacturing, automation, design and energy. Some of the topics covered include additive manufacturing, renewable energy resources, design automation, process automation and monitoring, etc. This volume will prove a valuable resource for those in academia and industry.
Download or read book Power System Monitoring and Control written by Hassan Bevrani and published by John Wiley & Sons. This book was released on 2014-05-19 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: POWER SYSTEM MONITORING AND CONTROL An invaluable resource for addressing the myriad critical technical engineering considerations in modern electric power system design and operation Power System Monitoring and Control (PSMC) is becoming increasingly significant in the design, planning, and operation of modern electric power systems. In response to the existing challenge of integrating advanced metering, computation, communication, and control into appropriate levels of PSMC, Power System Monitoring and Control presents a comprehensive overview of the basic principles and key technologies for the monitoring, protection, and control of contemporary wide-area power systems. A variety of topical issues are addressed, including renewable energy sources, smart grids, wide area stabilizing, coordinated voltage regulation and angle oscillation damping—as well as the advantages of phasor measurement units (PMUs) and global positioning system (GPS) time signal. Analysis and synthesis examples, along with case studies, add depth and clarity to all topics. Provides an up-to-date and comprehensive reference for researchers and engineers working on wide-area PSMC Links fundamental concepts of PSMC, advanced metering and control theory/techniques, and practical engineering considerations Covers PSMC problem understanding, design, practical aspects, and topics such as smart grid and coordinated angle oscillation damping and voltage regulation Incorporates the authors’ experiences teaching and researching in international locales including Japan, Singapore, Malaysia, and Australia Power System Monitoring and Control is ideally suited for a graduate course on this topic. It is also a practical reference for researchers and professional engineers working in power system monitoring, dynamic stability and control.
