Download or read book Integration of Heat Pumps Into Industrial Processes written by and published by . This book was released on 1989 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Department of Energy and others have funded studies to assess the potential for energy savings using industrial heat pumps. The studies included classifications of heat pumps, economic evaluations, and placement of heat pumps in industrial processes. Pinch technology was used in the placement studies to determine the placement, size, and type of heat pumps for a given applications. There appears to be considerable scope for heat pumping in several industries, but, where maximum process energy savings are desired, it is important to consider heat pumping in the context of overall process integration. 19 refs., 15 figs.

Download or read book Pinch Analysis and Process Integration written by Ian C. Kemp and published by Elsevier. This book was released on 2011-04-01 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pinch analysis and related techniques are the key to design of inherently energy-efficient plants. This book shows engineers how to understand and optimize energy use in their processes, whether large or small. Energy savings go straight to the bottom line as increased profit, as well as reducing emissions. This is the key guide to process integration for both experienced and newly qualified engineers, as well as academics and students. It begins with an introduction to the main concepts of pinch analysis, the calculation of energy targets for a given process, the pinch temperature and the golden rules of pinch-based design to meet energy targets. The book shows how to extract the stream data necessary for a pinch analysis and describes the targeting process in depth. Other essential details include the design of heat exchanger networks, hot and cold utility systems, CHP (combined heat and power), refrigeration and optimization of system operating conditions. Many tips and techniques for practical application are covered, supported by several detailed case studies and other examples covering a wide range of industries, including buildings and other non-process situations. The only dedicated pinch analysis and process integration guide, fully revised and expanded supported by free downloadable energy targeting software The perfect guide and reference for chemical process, food and biochemical engineers, plant engineers and professionals concerned with energy optimisation, including building designers Covers the practical analysis of both new and existing systems, with ful details of industrial applications and case studies

Download or read book Integration of Heat Pumps in Industrial Processes written by Erik Wallin and published by . This book was released on 1993 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Heat Pumps in Chemical Process Industry written by Anton A. Kiss and published by CRC Press. This book was released on 2016-10-14 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the chemical process industry is among the most energy demanding sectors, chemical engineers are endeavoring to contribute towards sustainable future. Due to the limitation of fossil fuels, the need for energy independence, as well as the environmental problem of the greenhouse gas effect, there is a large increasing interest in the research and development of chemical processes that require less capital investment and reduced operating costs and lead to high eco-efficiency. The use of heat pumps is a hot topic due to many advantages, such as low energy requirements as well as an increasing number of industrial applications. Therefore, in the current book, authors are focusing on use of heat pumps in the chemical industry, providing an overview of heat pump technology as applied in the chemical process industry, covering both theoretical and practical aspects: working principle, applied thermodynamics, theoretical background, numerical examples and case studies, as well as practical applications. The worked-out examples have been included to instruct students, engineers and process designers about how to design various heat pumps used in the industry. Reader friendly resources namely relevant equations, diagrams, figures and references that reflect the current and upcoming heat pump technologies, will be of great help to all readers from the chemical and petrochemical industry, biorefineries and other related areas.

Download or read book High lift Chemical Heat Pump Technologies for Industrial Processes written by and published by . This book was released on 1995 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditionally industrial heat pumps (IHPs) have found applications on a process specific basis with reject heat from a process being upgraded and returned to the process. The IHP must be carefully integrated into a process since improper placement may result in an uneconomic application. Industry has emphasized a process integration approach to the design and operation of their plants. Heat pump applications have adopted this approach and the area of applicability was extended by utilizing a process integrated approach where reject heat from one process is upgraded and then used as input for another process. The DOE IHP Program has extended the process integration approach of heat pump application with a plant utility emphasis. In this design philosophy, reject heat from a process is upgraded to plant utility conditions and fed into the plant distribution system. This approach has the advantage that reject heat from any pr@s can be used as input and the output can be used at any location within the plant. Thus the approach can be easily integrated into existing industrial applications and all reject heat streams are potential targets of opportunity. The plant utility approach can not be implemented without having heat pumps with high-lift capabilities (on the order of 65°C). Current heat pumps have only about half the lift capability required. Thus the current emphasis for the DOE IHP Program is the development of high lift chemical heat pumps that can deliver heat more economically to higher heat delivery temperatures. This is achieved with innovative cooling (refrigeration) and heating technologies which are based on advanced cycles and advanced working fluids or a combination of both. This paper details the plan to develop economically competitive, environmentally acceptable heat pump technologies that are capable of providing the delivery temperature and lift required to supply industrial plant utility-grade process heating and/or cooling.

Download or read book Handbook of Process Integration PI written by Jiří Jaromír Klemeš and published by Elsevier. This book was released on 2013-07-31 with total page 1201 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its first development in the 1970s, Process Integration (PI) has become an important methodology in achieving more energy efficient processes. This pioneering handbook brings together the leading scientists and researchers currently contributing to PI development, pooling their expertise and specialist knowledge to provide readers with a comprehensive and up-to-date guide to the latest PI research and applications. After an introduction to the principles of PI, the book reviews a wide range of process design and integration topics ranging from heat and utility systems to water, recycling, waste and hydrogen systems. The book considers Heat Integration, Mass Integration and Extended PI as well as a series of applications and case studies. Chapters address not just operating and capital costs but also equipment design and operability issues, through to buildings and supply chains. With its distinguished editor and international team of expert contributors, Handbook of Process Integration (PI) is a standard reference work for managers and researchers in all energy-intensive industries, as well as academics with an interest in them, including those designing and managing oil refineries, petrochemical and power plants, as well as paper/pulp, steel, waste, food and drink processors. This pioneering handbook provides a comprehensive and up-to-date guide to the latest process integration research and applications Reviews a wide range of process design and integration topics ranging from heat and utility systems to water, recycling, waste and hydrogen systems Chapters also address equipment design and operability issues, through to buildings and supply chains

Download or read book Advances in Ground Source Heat Pump Systems written by Simon Rees and published by Woodhead Publishing. This book was released on 2016-05-13 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Ground-Source Heat Pump Systems relates the latest information on source heat pumps (GSHPs), the types of heating and/or cooling systems that transfer heat from, or to, the ground, or, less commonly, a body of water. As one of the fastest growing renewable energy technologies, they are amongst the most energy efficient systems for space heating, cooling, and hot water production, with significant potential for a reduction in building carbon emissions. The book provides an authoritative overview of developments in closed loop GSHP systems, surface water, open loop systems, and related thermal energy storage systems, addressing the different technologies and component methods of analysis and optimization, among other subjects. Chapters on building integration and hybrid systems complete the volume. Provides the geological aspects and building integration covered together in one convenient volume Includes chapters on hybrid systems Presents carefully selected chapters that cover areas in which there is significant ongoing research Addresses geothermal heat pumps in both heating and cooling modes

Download or read book Process Intensification and Integration for Sustainable Design written by Dominic C. Y. Foo and published by John Wiley & Sons. This book was released on 2020-12-01 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents comprehensive coverage of process intensification and integration for sustainable design, along with fundamental techniques and experiences from the industry Drawing from fundamental techniques and recent industrial experiences, this book discusses the many developments in process intensification and integration and focuses on increasing sustainability via several overarching topics such as Sustainable Manufacturing, Energy Saving Technologies, and Resource Conservation and Pollution Prevention Techniques. Process Intensification and Integration for Sustainable Design starts discussions on: shale gas as an option for the production of chemicals and challenges for process intensification; the design and techno-economic analysis of separation units to handle feedstock variability in shale gas treatment; RO-PRO desalination; and techno-economic and environmental assessment of ultrathin polysulfone membranes for oxygen-enriched combustion. Next, it looks at process intensification of membrane-based systems for water, energy, and environment applications; the design of internally heat-integrated distillation column (HIDiC); and graphical analysis and integration of heat exchanger networks with heat pumps. Decomposition and implementation of large-scale interplant heat integration is covered, as is the synthesis of combined heat and mass exchange networks (CHAMENs) with renewables. The book also covers optimization strategies for integrating and intensifying housing complexes; a sustainable biomass conversion process assessment; and more. Covers the many advances and changes in process intensification and integration Provides side-by-side discussions of fundamental techniques and recent industrial experiences to guide practitioners in their own processes Presents comprehensive coverage of topics relevant, among others, to the process industry, biorefineries, and plant energy management Offers insightful analysis and integration of reactor and heat exchanger network Looks at optimization of integrated water and multi-regenerator membrane systems involving multi-contaminants Process Intensification and Integration for Sustainable Design is an ideal book for process engineers, chemical engineers, engineering scientists, engineering consultants, and chemists.

Download or read book Advances in Heat Pump Assisted Drying Technology written by Vasile Minea and published by . This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: 7: Numerical Modeling of Heat Pump-Assisted Contact Drying -- 8: Advances in Dehumidifier Timber Drying in New Zealand -- Back Cover

Download or read book Process Integration Study Advanced Industrial Heat Pump Applications and Evaluations written by and published by . This book was released on 1992 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work was carried out in two phases: Phase 1; identification of opportunities for heat pumps in industrial applications and Phase 2; evaluation of heat pumps in industrial applications. In Phase 1, pinch analysis was applied to several industrial sites to identify the best opportunities for heat pumping and other forms of heat integration. In Phase 2, more detailed analyses were undertaken, including the evaluation of a heat pump installed as a recommendation of Phase 1.

Download or read book Handbook of Process Integration PI written by Jiří Jaromír Klemeš and published by Woodhead Publishing. This book was released on 2022-11-09 with total page 1190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Process Integration (PI): Minimisation of Energy and Water Use, Waste and Emissions, Second Edition provides an up-to-date guide on the latest PI research and applications. Since the first edition published, methodologies and sustainability targets have developed considerably. Each chapter has been fully updated, with six new chapters added in this release, covering emissions, transport, water scarcity, reliability and maintenance, environmental impact and circular economy. This version also now includes worked examples and simulations to deepen the reader’s understanding. With its distinguished editor and international team of expert contributors, this book is an important reference work for managers and researchers in all energy and sustainability industries, as well as academics and students in Energy, Chemical, Process, and Environmental Engineering. Provides a fully updated handbook with six new chapters that reflect the latest research and applications on process integration Reviews a wide range of process design and integration topics, ranging from heat and utility systems to water, recycling, waste and hydrogen systems Covers equipment design and operability issues, with a strong extension to environmental engineering and suitability issues

Download or read book Heat Pumps written by Kazimierz Brodowicz and published by Elsevier. This book was released on 2013-10-22 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat pumps and related technology are in widespread use in industrial processes and installations. This book presents a unified, comprehensive and systematic treatment of the design and operation of both compression and sorption heat pumps. Heat pump thermodynamics, the choice of working fluid and the characteristics of low temperature heat sources and their application to heat pumps are covered in detail.Economic aspects are discussed and the extensive use of the exergy concept in evaluating performance of heat pumps is a unique feature of the book. The thermodynamic and chemical properties of certain new working fluids and sorbents are also explored.There are considerable pressures on those involved in the use of heat pumps to achieve energy savings and this presents a challenging task in today's industrial climate. This book provides many examples of such energy savings such as the use of large heat pump units utilising various low temperature industrial waste heat sources. Heat Pumps is illustrated throughout by specific solutions as applied worldwide. The subject area is approached logically, covering both design and calculation methods, and is oriented towards the needs of the process user. The treatment given to the selection of working fluids should be compulsory reading. - Chemical Engineer, June 1994

Download or read book Process Integration of Industrial Heat Pumps in Grass root and Retrofit Situations written by Erik Wallin and published by . This book was released on 1996 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Heat Pumps for Energy Efficiency and Environmental Progress written by J. Bosma and published by Elsevier. This book was released on 2012-12-02 with total page 613 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 70 papers collected in this volume present an up to date review of the trends in heat pump technology. The heat pump is reviewed both as being part of a more comprehensive system, and as a refined device providing energy and greenhouse gas emission reductions. Its implementation in a system or process must be carefully considered at an early stage of design or development, and process integration is discussed in detail as a valuable tool for industry.The heat pump is proving to be a highly effective energy conserving tool, particularly when designed and used as an integral part of a system. Environmental benefits are gained when energy is conserved, and heat pumps can make a major contribution in this area. However, some heat pumps use working fluids which are environmentally unfriendly, and the progress that has been made in the field of alternative refrigerants is reported on. The volume will prove an indispensable reference source on the wide-ranging applications that have been developed since the last international conference, on such topics as heat pump field trials, pilot plants and development programmes.

Download or read book Process Intensification and Integration for Sustainable Design written by Dominic C. Y. Foo and published by John Wiley & Sons. This book was released on 2021-04-19 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents comprehensive coverage of process intensification and integration for sustainable design, along with fundamental techniques and experiences from the industry Drawing from fundamental techniques and recent industrial experiences, this book discusses the many developments in process intensification and integration and focuses on increasing sustainability via several overarching topics such as Sustainable Manufacturing, Energy Saving Technologies, and Resource Conservation and Pollution Prevention Techniques. Process Intensification and Integration for Sustainable Design starts discussions on: shale gas as an option for the production of chemicals and challenges for process intensification; the design and techno-economic analysis of separation units to handle feedstock variability in shale gas treatment; RO-PRO desalination; and techno-economic and environmental assessment of ultrathin polysulfone membranes for oxygen-enriched combustion. Next, it looks at process intensification of membrane-based systems for water, energy, and environment applications; the design of internally heat-integrated distillation column (HIDiC); and graphical analysis and integration of heat exchanger networks with heat pumps. Decomposition and implementation of large-scale interplant heat integration is covered, as is the synthesis of combined heat and mass exchange networks (CHAMENs) with renewables. The book also covers optimization strategies for integrating and intensifying housing complexes; a sustainable biomass conversion process assessment; and more. Covers the many advances and changes in process intensification and integration Provides side-by-side discussions of fundamental techniques and recent industrial experiences to guide practitioners in their own processes Presents comprehensive coverage of topics relevant, among others, to the process industry, biorefineries, and plant energy management Offers insightful analysis and integration of reactor and heat exchanger network Looks at optimization of integrated water and multi-regenerator membrane systems involving multi-contaminants Process Intensification and Integration for Sustainable Design is an ideal book for process engineers, chemical engineers, engineering scientists, engineering consultants, and chemists.

Download or read book Sustainability in the Process Industry Integration and Optimization written by Jiri Klemes and published by McGraw Hill Professional. This book was released on 2010-09-22 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Improve the energy efficiency of process industry practices Sustainability in the Process Industry explains process integration and optimization and discusses applications for improving the energy and water efficiency of industrial as well as nonindustrial energy users. Approaches for adapting these methodologies to include the integration of waste and renewable energy sources are covered. This authoritative text contains eight industrial-based case studies and nine testing examples with developed solutions. Details on software tools are also included in this practical guide. Optimization goals and application areas within sustainable industrial process design and integration Formulating sustainable tasks as optimization problems Improving energy efficiency through process integration Heat exchange and heat recovery Water/mass integration Minimizing water use and efficient generation New, relevant process integration research results Process optimization frameworks, including mathematical programming and P-graph and S-graph frameworks Applications of process integration, modeling, and optimization software tools

Download or read book Integrated Spatial and Energy Planning written by Gernot Stoeglehner and published by Springer. This book was released on 2016-04-02 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on spatial planning – an important determinant of energy saving and renewable energy supply. Revealing the key driving forces for spatial development supporting the shift towards energy efficiency and renewable energy supplies, it shows the importance of integrated spatial and energy planning approaches for a timely and sustainable change of energy systems, thus supporting policies of climate protection. As operating within the context of renewable energy sources is becoming a major policy issue at the international, European and national level, spatial dimensions of renewable energy systems as well as challenges, barriers and opportunities in different spatial contexts become more important. This book analyses not only the fundamental system interrelations between resources, technologies and consumption patterns with respect to energy, but also the links to the spatial context, and provides guidelines for researchers as well as practitioners in this new, emerging field. It presents innovative analytical tools to solve real-world problems and discusses the most important fields of action in integrated spatial and energy planning including planning contents, planning visions and principles as well as planning process design and planning methodology.