Download or read book Integration of Dynamic Data Into Reservoir Description Using Streamline Approaches written by Zhong He and published by . This book was released on 2003 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Integration of dynamic data is critical for reliable reservoir description and has been an outstanding challenge for the petroleum industry. This work develops practical dynamic data integration techniques using streamline approaches to condition static geological models to various kinds of dynamic data, including two-phase production history, interference pressure observations and primary production data. The proposed techniques are computationally efficient and robust, and thus well-suited for large-scale field applications. We can account for realistic field conditions, such as gravity, and changing field conditions, arising from infill drilling, pattern conversion, and recompletion, etc., during the integration of two-phase production data. Our approach is fast and exhibits rapid convergence even when the initial model is far from the solution. The power and practical applicability of the proposed techniques are demonstrated with a variety of field examples. Tointegrate two-phase production data, a travel-time inversion analogous to seismic inversion is adopted. We extend the method via a 'generalized travel-time' inversion to ensure matching of the entire production response rather than just a single time point while retaining most of the quasi-linear property of travel-time inversion. To integrate the interference pressure data, we propose an alternating procedure of travel-time inversion and peak amplitude inversion or pressure inversion to improve the overall matching of the pressure response. A key component of the proposed techniques is the efficient computation of the sensitivities of dynamic responses with respect to reservoir parameters. These sensitivities are calculated analytically using a single forward simulation. Thus, our methods can be orders of magnitude faster than finite-difference based numerical approaches that require multiple forward simulations. Streamline approach has also been extended to identify reservoir compartmentalization and flow barriers using primary production data in conjunction with decline type-curve analysis. The streamline 'diffusive' time of flight provides an effective way to calculate the drainage volume in 3D heterogeneous reservoirs. The flow barriers and reservoir compartmentalization are inferred based on the matching of drainage volumes from streamline-based calculation and decline type-curve analysis. The proposed approach is well-suited for application in the early stages of field development with limited well data and has been illustrated using a field example from the Gulf of Mexico.
Download or read book Dynamic Data Integration Into High Resolution Reservoir Models Using Streamline based Inversion written by Seongsik Yoon and published by . This book was released on 2000 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Quantitative Information Fusion for Hydrological Sciences written by Xing Cai and published by Springer. This book was released on 2008-01-12 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this rapidly evolving world of knowledge and technology, do you ever wonder how hydrology is catching up? Here, two highly qualified scientists edit a volume that takes the angle of computational hydrology and envision one of the science’s future directions – namely, the quantitative integration of high-quality hydrologic field data with geologic, hydrologic, chemical, atmospheric, and biological information to characterize and predict natural systems in hydrological sciences.
Download or read book SPE Journal written by and published by . This book was released on 2004 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Image Processing Based on Partial Differential Equations written by Xue-Cheng Tai and published by Springer Science & Business Media. This book was released on 2006-11-22 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book publishes a collection of original scientific research articles that address the state-of-art in using partial differential equations for image and signal processing. Coverage includes: level set methods for image segmentation and construction, denoising techniques, digital image inpainting, image dejittering, image registration, and fast numerical algorithms for solving these problems.
Download or read book Streamline based Production Data Integration in Naturally Fractured Reservoirs written by Mishal Habis Al Harbi and published by . This book was released on 2005 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Streamline-based models have shown great potential in reconciling high resolution geologic models to production data. In this work we extend the streamline-based production data integration technique to naturally fractured reservoirs. We use a dual-porosity streamline model for fracture flow simulation by treating the fracture and matrix as separate continua that are connected through a transfer function. Next, we analyticallycompute the sensitivities that define the relationship between the reservoir properties and the production response in fractured reservoirs. Finally, production data integration is carried out via the Generalized Travel Time inversion (GTT). We also apply the streamline-derived sensitivities in conjunction with a dual porosity finite difference simulator to combine the efficiency of the streamline approach with the versatility of the finite difference approach. This significantly broadens the applicability of the streamline- based approach in terms of incorporating compressibility effects and complex physics. The number of reservoir parameters to be estimated is commonly orders of magnitude larger than the observation data, leading to non-uniqueness and uncertainty in reservoir parameter estimate. Such uncertainty is passed to reservoir response forecast which needs to be quantified in economic and operational risk analysis. In this work we sample parameter uncertainty using a new two-stage Markov Chain Monte Carlo (MCMC) that is very fast and overcomes much of its current limitations. The computational efficiency comes through a substantial increase in the acceptance rate during MCMC by using a fast linearized approximation to the flow simulation and the likelihood function, the critical link between the reservoir model and production data. The Gradual Deformation Method (GDM) provides a useful framework to preserve geologic structure. Current dynamic data integration methods using GDM are inefficient due to the use of numerical sensitivity calculations which limits the method to deforming two or three models at a time. In this work, we derived streamline-based analytical sensitivities for the GDM that can be obtained from a single simulation run for any number of basis models. The new Generalized Travel Time GDM (GTT-GDM) is highly efficient and achieved a performance close to regular GTT inversion while preserving the geologic structure.
Download or read book SPE Reservoir Evaluation Engineering written by and published by . This book was released on 2010 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Uncertainty Analysis and Reservoir Modeling written by Y. Zee Ma and published by AAPG. This book was released on 2011-12-20 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Streamline Approaches for Integrating Production History with Geologic Information in Reservoir Models written by Yuandong Wang and published by . This book was released on 2002 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2009 with total page 810 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Data Methods Models and Their Applications in Geoscience written by DongMei Chen and published by BoD – Books on Demand. This book was released on 2011-12-22 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: With growing attention on global environmental and climate change, geoscience has experienced rapid change and development in the last three decades. Many new data, methods and modeling techniques have been developed and applied in various aspects of geoscience. The chapters collected in this book present an excellent profile of the current state of various data, analysis methods and modeling techniques, and demonstrate their applications from hydrology, geology and paleogeomorphology, to geophysics, environmental and climate change. The wide range methods and techniques covered in the book include information systems and technology, global position system (GPS), digital sediment core image analysis, fuzzy set theory for hydrology, spatial interpolation, spectral analysis of geophysical data, GIS-based hydrological models, high resolution geological models, 3D sedimentology, change detection from remote sensing, etc. Besides two comprehensive review articles, most chapters focus on in-depth studies of a particular method or technique.
Download or read book Handbook of Dynamic Data Driven Applications Systems written by Frederica Darema and published by Springer Nature. This book was released on 2023-10-16 with total page 937 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Second Volume in the series Handbook of Dynamic Data Driven Applications Systems (DDDAS) expands the scope of the methods and the application areas presented in the first Volume and aims to provide additional and extended content of the increasing set of science and engineering advances for new capabilities enabled through DDDAS. The methods and examples of breakthroughs presented in the book series capture the DDDAS paradigm and its scientific and technological impact and benefits. The DDDAS paradigm and the ensuing DDDAS-based frameworks for systems’ analysis and design have been shown to engender new and advanced capabilities for understanding, analysis, and management of engineered, natural, and societal systems (“applications systems”), and for the commensurate wide set of scientific and engineering fields and applications, as well as foundational areas. The DDDAS book series aims to be a reference source of many of the important research and development efforts conducted under the rubric of DDDAS, and to also inspire the broader communities of researchers and developers about the potential in their respective areas of interest, of the application and the exploitation of the DDDAS paradigm and the ensuing frameworks, through the examples and case studies presented, either within their own field or other fields of study. As in the first volume, the chapters in this book reflect research work conducted over the years starting in the 1990’s to the present. Here, the theory and application content are considered for: Foundational Methods Materials Systems Structural Systems Energy Systems Environmental Systems: Domain Assessment & Adverse Conditions/Wildfires Surveillance Systems Space Awareness Systems Healthcare Systems Decision Support Systems Cyber Security Systems Design of Computer Systems The readers of this book series will benefit from DDDAS theory advances such as object estimation, information fusion, and sensor management. The increased interest in Artificial Intelligence (AI), Machine Learning and Neural Networks (NN) provides opportunities for DDDAS-based methods to show the key role DDDAS plays in enabling AI capabilities; address challenges that ML-alone does not, and also show how ML in combination with DDDAS-based methods can deliver the advanced capabilities sought; likewise, infusion of DDDAS-like approaches in NN-methods strengthens such methods. Moreover, the “DDDAS-based Digital Twin” or “Dynamic Digital Twin”, goes beyond the traditional DT notion where the model and the physical system are viewed side-by-side in a static way, to a paradigm where the model dynamically interacts with the physical system through its instrumentation, (per the DDDAS feed-back control loop between model and instrumentation).
Download or read book Report written by and published by . This book was released on 2002 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Soft Computing and Intelligent Data Analysis in Oil Exploration written by M. Nikravesh and published by Elsevier. This book was released on 2003-04-22 with total page 755 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book highlights soft computing and geostatistics applications in hydrocarbon exploration and production, combining practical and theoretical aspects.It spans a wide spectrum of applications in the oil industry, crossing many discipline boundaries such as geophysics, geology, petrophysics and reservoir engineering. It is complemented by several tutorial chapters on fuzzy logic, neural networks and genetic algorithms and geostatistics to introduce these concepts to the uninitiated. The application areas include prediction of reservoir properties (porosity, sand thickness, lithology, fluid), seismic processing, seismic and bio stratigraphy, time lapse seismic and core analysis.There is a good balance between introducing soft computing and geostatistics methodologies that are not routinely used in the petroleum industry and various applications areas. The book can be used by many practitioners such as processing geophysicists, seismic interpreters, geologists, reservoir engineers, petrophysicist, geostatistians, asset mangers and technology application professionals. It will also be of interest to academics to assess the importance of, and contribute to, R&D efforts in relevant areas.
Download or read book Space Structure and Randomness written by Michel Bilodeau and published by Springer Science & Business Media. This book was released on 2007-12-23 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Space, structure, and randomness: these are the three key concepts underlying Georges Matheron’s scientific work. He first encountered them at the beginning of his career when working as a mining engineer, and then they resurfaced in fields ranging from meteorology to microscopy. What could these radically different types of applications possibly have in common? First, in each one only a single realisation of the phenomenon is available for study, but its features repeat themselves in space; second, the sampling pattern is rarely regular, and finally there are problems of change of scale. This volume is divided in three sections on random sets, geostatistics and mathematical morphology. They reflect his professional interests and his search for underlying unity. Some readers may be surprised to find theoretical chapters mixed with applied ones. We have done this deliberately. GM always considered that the distinction between the theory and practice was purely academic. When GM tackled practical problems, he used his skill as a physicist to extract the salient features and to select variables which could be measured meaningfully and whose values could be estimated from the available data. Then he used his outstanding ability as a mathematician to solve the problems neatly and efficiently. It was his capacity to combine a physicist’s intuition with a mathematician’s analytical skills that allowed him to produce new and innovative solutions to difficult problems. The book should appeal to graduate students and researchers working in mathematics, probability, statistics, physics, spatial data analysis, and image analysis. In addition it will be of interest to those who enjoy discovering links between scientific disciplines that seem unrelated at first glance. In writing the book the contributors have tried to put GM’s ideas into perspective. During his working life, GM was a genuinely creative scientist. He developed innovative concepts whose usefulness goes far beyond the confines of the discipline for which they were originally designed. This is why his work remains as pertinent today as it was when it was first written.
Download or read book Reservoir Compartmentalization written by S. J. Jolley and published by Geological Society of London. This book was released on 2010 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Reservoir compartmentalization - the segregation of a petroleum accumulation into a number of individual fluid/pressure compartments - controls the volume of moveable oil or gas that might be connected to any given well drilled in a field, and consequently impacts 'booking' of reserves and operational profitability. This is a general feature of modern exploration and production portfolios, and has driven major developments in geoscience, engineering and related technology. Given that compartmentalization is a consequence of many factors, an integrated subsurface approach is required to better understand and predict compartmentalization behaviour, and to minimize the risk of it occurring unexpectedly. This volume reviews our current understanding and ability to model compartmentalization. It highlights the necessity for effective specialist discipline integration, and the value of learning from operational experience in: detection and monitoring of compartmentalization; stratigraphic and mixed-mode compartmentalization; and fault-dominated compartmentalization"--Page 4 of cover.
Download or read book Petroleum Geoscience written by Knut Bjørlykke and published by Springer. This book was released on 2015-05-19 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive textbook presents an overview of petroleum geoscience for geologists active in the petroleum industry, while also offering a useful guide for students interested in environmental geology, engineering geology and other aspects of sedimentary geology. In this second edition, new chapters have been added and others expanded, covering geophysical methods in general and electromagnetic exploration methods in particular, as well as reservoir modeling and production, unconventional resources and practical petroleum exploration.
