Download or read book Renewable Energy Driven Future written by Jingzheng Ren and published by Academic Press. This book was released on 2020-09-16 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to promote the sustainable development of renewable energy and renewable-energy-driven technologies, Renewable-Energy-Driven Future: Technologies, Modelling, Applications, Sustainability and Policies provides a comprehensive view of the advanced renewable technologies and the benefits of utilizing renewable energy sources.Discussing the ways for promoting the sustainable development of renewable energy from the perspectives of technology, modelling, application, sustainability and policy, this book includes the advanced renewable-energy-driven technologies, the models for renewable energy planning and integration, the innovative applications of renewable energy sources, decision-support tools for sustainability assessment and ranking of renewable energy systems, and the regulations and policies of renewable energy.This book can benefit the researchers and experts of renewable energy by helping them to have a holistic view of renewable energy. It can also benefit the policymakers and decision-makers by helping them to make informed decisions. - Presents the advanced renewable-energy-driven technologies and the innovative applications of renewable energy sources - Develops the models for the efficient use of renewable energy, decision-making and the investigation of its climate and economic benefits - Investigates the sustainability of renewable energy systems - Features the regulations and policies of renewable energy

Download or read book Advanced Power Generation Systems written by Ibrahim Dincer and published by Academic Press. This book was released on 2014-07-15 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Power Generation Systems examines the full range of advanced multiple output thermodynamic cycles that can enable more sustainable and efficient power production from traditional methods, as well as driving the significant gains available from renewable sources. These advanced cycles can harness the by-products of one power generation effort, such as electricity production, to simultaneously create additional energy outputs, such as heat or refrigeration. Gas turbine-based, and industrial waste heat recovery-based combined, cogeneration, and trigeneration cycles are considered in depth, along with Syngas combustion engines, hybrid SOFC/gas turbine engines, and other thermodynamically efficient and environmentally conscious generation technologies. The uses of solar power, biomass, hydrogen, and fuel cells in advanced power generation are considered, within both hybrid and dedicated systems. The detailed energy and exergy analysis of each type of system provided by globally recognized author Dr. Ibrahim Dincer will inform effective and efficient design choices, while emphasizing the pivotal role of new methodologies and models for performance assessment of existing systems. This unique resource gathers information from thermodynamics, fluid mechanics, heat transfer, and energy system design to provide a single-source guide to solving practical power engineering problems. - The only complete source of info on the whole array of multiple output thermodynamic cycles, covering all the design options for environmentally-conscious combined production of electric power, heat, and refrigeration - Offers crucial instruction on realizing more efficiency in traditional power generation systems, and on implementing renewable technologies, including solar, hydrogen, fuel cells, and biomass - Each cycle description clarified through schematic diagrams, and linked to sustainable development scenarios through detailed energy, exergy, and efficiency analyses - Case studies and examples demonstrate how novel systems and performance assessment methods function in practice

Download or read book Renewable Energy Sources and Climate Change Mitigation written by Ottmar Edenhofer and published by Cambridge University Press. This book was released on 2011-11-21 with total page 1088 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Intergovernmental Panel on Climate Change Special Report (IPCC-SRREN) assesses the potential role of renewable energy in the mitigation of climate change. It covers the six most important renewable energy sources - bioenergy, solar, geothermal, hydropower, ocean and wind energy - as well as their integration into present and future energy systems. It considers the environmental and social consequences associated with the deployment of these technologies, and presents strategies to overcome technical as well as non-technical obstacles to their application and diffusion. SRREN brings a broad spectrum of technology-specific experts together with scientists studying energy systems as a whole. Prepared following strict IPCC procedures, it presents an impartial assessment of the current state of knowledge: it is policy relevant but not policy prescriptive. SRREN is an invaluable assessment of the potential role of renewable energy for the mitigation of climate change for policymakers, the private sector, and academic researchers.

Download or read book Handbook of Energy Systems in Green Buildings written by Ruzhu Wang and published by Springer. This book was released on 2018-06-18 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides a comprehensive summary on the energy systems used in green buildings, with a particular focus on solar energy - the most common renewable energy source applied in this field. With the growing concern about environmental protections, the concepts of green building have been widely promoted and implemented in nowadays building designs and constructions. Among all, sustainable energy systems, including energy harvesting, conversion, and storage, is one of most important design factors in green buildings. Unlike traditional energy systems which highly rely on fossil fuel, green buildings utilize renewable energy source or high efficient energy systems, or both, to provide environmental friendly, low carbon waste energy. The most updated concepts, designs, technologies developed and implemented in heat pumps, cooling systems, power systems, and energy storage will be discussed here in details. This handbook is subdivided into 7-9 main sections to provide an in-depth discussion from foundational principles to practical techniques. In addition, different cases about green energy systems implemented in global will be discussed. The book will be structured easy-to-read, to make it more accessible to graduate students and professionals in diverse scientific and engineering communities, including applied physics, civil engineering, electrical engineering, mechanical engineering, material engineering, and chemical engineering.

Download or read book Combined Cooling Heating and Power Systems written by Yang Shi and published by John Wiley & Sons. This book was released on 2017-09-05 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive review of state-of-the-art CCHP modeling, optimization, and operation theory and practice This book was written by an international author team at the forefront of combined cooling, heating, and power (CCHP) systems R&D. It offers systematic coverage of state-of-the-art mathematical modeling, structure optimization, and CCHP system operation, supplemented with numerous illustrative case studies and examples. CCHP systems are an exciting emerging energy technology offering significant economic and environmental benefits. Combined Cooling, Heating, and Power Systems: Modelling, Optimization, and Operation is a timely response to ongoing efforts to maximize the efficiency of that technology. It begins with a survey of CCHP systems from the technological and societal perspectives, offering readers a broad and stimulating overview of the field. It then digs down into topics crucial for optimal CCHP operation. Discussions of each topic are carefully structured, walking readers from introduction and background to technical details. A set of new methodologies for the modeling, optimization and control of CCHP systems are presented within a unified framework. And the authors demonstrate innovative solutions to a variety of CCHP systems problems using new approaches to optimal power flow, load forecasting, and system operation design. Provides a comprehensive review of state-of-the-art of CCHP system development Presents new methodologies for mathematical modeling, optimization, and advanced control Combines theoretical rigor with real-world application perspectives Features numerous examples demonstrating an array of new design strategies Reflects the combined experience of veteran researchers in the field whose contributions are well recognized within the energy community Offers excellent background reading for students currently enrolled in the growing number of courses on energy systems at universities worldwide Timely, authoritative, and offering a balanced presentation of theory and practice, Combined Cooling, Heating, and Power Systems: Modelling, Optimization, and Operation is a valuable resource forresearchers, design practitioners, and graduate students in the areas of control theory, energy management, and energy systems design.

Download or read book 24th European Symposium on Computer Aided Process Engineering written by and published by Elsevier. This book was released on 2014-06-20 with total page 1966 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 24th European Symposium on Computer Aided Process Engineering creates an international forum where scientific and industrial contributions of computer-aided techniques are presented with applications in process modeling and simulation, process synthesis and design, operation, and process optimization. The organizers have broadened the boundaries of Process Systems Engineering by inviting contributions at different scales of modeling and demonstrating vertical and horizontal integration. Contributions range from applications at the molecular level to the strategic level of the supply chain and sustainable development. They cover major classical themes, at the same time exploring a new range of applications that address the production of renewable forms of energy, environmental footprints and sustainable use of resources and water.

Download or read book Exergy Analysis and Thermoeconomics of Buildings written by Jose M Sala-Lizarraga and published by Butterworth-Heinemann. This book was released on 2019-10-01 with total page 1116 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quantifying exergy losses in the energy supply system of buildings reveals the potential for energy improvement, which cannot be discovered using conventional energy analysis. Thermoeconomics combines economic and thermodynamic analysis by applying the concept of cost (an economic concept) to exergy, as exergy is a thermodynamic property fit for this purpose, in that it combines the quantity of energy with its quality factor. Exergy Analysis and Thermoeconomics of Buildings applies exergy analysis methods and thermoeconomics to the built environment. The mechanisms of heat transfer throughout the envelope of buildings are analyzed from an exergy perspective and then to the building thermal installations, analyzing the different components, such as condensing boilers, absorption refrigerators, microcogeneration plants, etc., including solar installations and finally the thermal facilities as a whole. A detailed analysis of the cost formation process is presented, which has its physical roots firmly planted in the second law of thermodynamics. The basic principles and the rules of cost allocation, in energy units (exergy cost), in monetary units (exergoeconomic cost), and in CO2 emissions (exergoenvironmental cost), based on the so-called Exergy Cost Theory are presented and applied to thermal installations of buildings. Clear and rigorous in its exposition, Exergy Analysis and Thermoeconomics of Buildings discusses exergy analysis and thermoeconomics and the role they could play in the analysis and design of building components, either the envelope or the thermal facilities, as well as the diagnosis of thermal installations. This book moves progressively from introducing the basic concepts to applying them. Exergy Analysis and Thermoeconomics of Buildings provides examples of specific cases throughout this book. These cases include real data, so that the results obtained are useful to interpret the inefficiencies and losses that truly occur in actual installations; hence, the assessment of their effects encourages the manner to improve efficiency. - Applies exergy analysis methods for the installation of building thermal facilities equipment components, including pipes, valves, heat exchangers, boilers and heat pumps - Helps readers determine the operational costs of heating and cooling building systems - Includes exergy analysis methods that are devoted to absorption refrigerators, adsorption cooling systems, basic air conditioning processes, ventilation systems and solar systems, either thermal and PV - Discusses the direct application of exergy analysis concepts, including examples of buildings with typical heating, DHW and air conditioning installations

Download or read book Optimization of Chemical Processes written by José María Ponce-Ortega and published by Springer Nature. This book was released on with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Small and Micro Combined Heat and Power CHP Systems written by R Beith and published by Elsevier. This book was released on 2011-04-30 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: Small and micro combined heat and power (CHP) systems are a form of cogeneration technology suitable for domestic and community buildings, commercial establishments and industrial facilities, as well as local heat networks. One of the benefits of using cogeneration plant is a vastly improved energy efficiency: in some cases achieving up to 80–90% systems efficiency, whereas small-scale electricity production is typically at well below 40% efficiency, using the same amount of fuel. This higher efficiency affords users greater energy security and increased long-term sustainability of energy resources, while lower overall emissions levels also contribute to an improved environmental performance.Small and micro combined heat and power (CHP) systems provides a systematic and comprehensive review of the technological and practical developments of small and micro CHP systems.Part one opens with reviews of small and micro CHP systems and their techno-economic and performance assessment, as well as their integration into distributed energy systems and their increasing utilisation of biomass fuels. Part two focuses on the development of different types of CHP technology, including internal combustion and reciprocating engines, gas turbines and microturbines, Stirling engines, organic Rankine cycle process and fuel cell systems. Heat-activated cooling (i.e. trigeneration) technologies and energy storage systems, of importance to the regional/seasonal viability of this technology round out this section. Finally, part three covers the range of applications of small and micro CHP systems, from residential buildings and district heating, to commercial buildings and industrial applications, as well as reviewing the market deployment of this important technology.With its distinguished editor and international team of expert contributors, Small and micro combined heat and power (CHP) systems is an essential reference work for anyone involved or interested in the design, development, installation and optimisation of small and micro CHP systems. - Reviews small- and micro-CHP systems and their techno-economic and performance assessment - Explores integration into distributed energy systems and their increasing utilisation of biomass fuels - Focuses on the development of different types of CHP technology, including internal combustion and reciprocating engines

Download or read book Polygeneration Systems written by Francesco Calise and published by Academic Press. This book was released on 2021-09-22 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: The support for polygeneration lies in the possibility of integrating different technologies into a single energy system, to maximize the utilization of both fossil and renewable fuels. A system that delivers multiple forms of energy to users, maximizing the overall efficiency makes polygeneration an emerging and viable option for energy consuming industries. Polygeneration Systems: Design, Processes and Technologies provides simple and advanced calculation techniques to evaluate energy, environmental and economic performance of polygeneration systems under analysis. With specific design guidelines for each type of polygeneration system and experimental performance data, referred both to single components and overall systems, this title covers all aspects of polygeneration from design to operation, optimization and practical implementation. Giving different aspects of both fossil and non-fossil fuel based polygeneration and the wider area of polygeneration processes, this book helps readers learn general principles to specific system design and development through analysis of case studies, examples, simulation characteristics and thermodynamic and economic data. - Detailed economic data for technology to assist developing feasibility studies regarding the possible application of polygeneration technologies - Offers a comprehensive list of all current numerical and experimental results of polygeneration available - Includes simulation models, cost figures, demonstration projects and test standards for designers and researchers to validate their own models and/or to test the reliability of their results

Download or read book Sustainable Energy Technology and Policies written by Sudipta De and published by Springer. This book was released on 2017-12-21 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a state-of-the-art compilation focusing on both technological and policy aspects of sustainable energy production and consumption, which deals with issues like the need for and planning of smart cities, alternative transport fuel options, sustainable power production, pollution control technologies etc. The book comprises contributions from experts from all over the world, and addresses energy sustainability from different viewpoints. Specifically, the book focuses on energy sustainability in the Indian scenario with a background of the global perspective. Contributions from academia, policy makers and industry are included to address the challenge from different perspectives. The contents of this book will prove useful to researchers, professionals, and policy makers working in the area of green and sustainable energy.

Download or read book Exergy written by Ibrahim Dincer and published by Newnes. This book was released on 2012-12-31 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exergy, Second Edition deals with exergy and its applications to various energy systems and applications as a potential tool for design, analysis and optimization, and its role in minimizing and/or eliminating environmental impacts and providing sustainable development. In this regard, several key topics ranging from the basics of the thermodynamic concepts to advanced exergy analysis techniques in a wide range of applications are covered as outlined in the contents. - Offers comprehensive coverage of exergy and its applications, along with the most up-to-date information in the area with recent developments - Connects exergy with three essential areas in terms of energy, environment and sustainable development - Provides a number of illustrative examples, practical applications, and case studies - Written in an easy-to-follow style, starting from the basics to advanced systems

Download or read book Exergy Analysis of Heating Refrigerating and Air Conditioning written by Ibrahim Dincer and published by Academic Press. This book was released on 2015-08-08 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Improve and optimize efficiency of HVAC and related energy systems from an exergy perspective. From fundamentals to advanced applications, Exergy Analysis of Heating, Air Conditioning, and Refrigeration provides readers with a clear and concise description of exergy analysis and its many uses. Focusing on the application of exergy methods to the primary technologies for heating, refrigerating, and air conditioning, Ibrahim Dincer and Marc A. Rosen demonstrate exactly how exergy can help improve and optimize efficiency, environmental performance, and cost-effectiveness. The book also discusses the analysis tools available, and includes many comprehensive case studies on current and emerging systems and technologies for real-world examples. From introducing exergy and thermodynamic fundamentals to presenting the use of exergy methods for heating, refrigeration, and air conditioning systems, this book equips any researcher or practicing engineer with the tools needed to learn and master the application of exergy analysis to these systems. - Explains the fundamentals of energy/exergy for practitioners/researchers in HVAC&R fields for improving efficiency - Covers environmental assessments and economic evaluations for a well-rounded approach to the subject - Includes comprehensive case studies on both current and emerging systems/technologies - Provides examples from a range of applications – from basic HVAC&R to more diverse processes such as industrial heating/cooling, cogeneration and trigeneration, and thermal storage

Download or read book Geothermal Energy written by Marc A. Rosen and published by John Wiley & Sons. This book was released on 2016-11-18 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensively covers geothermal energy systems that utilize ground energy in conjunction with heat pumps to provide sustainable heating and cooling The book describes geothermal energy systems that utilize ground energy in conjunction with heat pumps and related technologies to provide heating and cooling. Also discussed are methods to model and assess such systems, as well as means to determine potential environmental impacts of geothermal energy systems and their thermal interaction. The book presents the most up-to-date information in the area. It provides material on a range of topics, from thermodynamic concepts to more advanced discussions of the renewability and sustainability of geothermal energy systems. Numerous applications of such systems are also provided. Geothermal Energy: Sustainable Heating and Cooling Using the Ground takes a research orientated approach to provide coverage of the state of the art and emerging trends, and includes numerous illustrative examples and case studies. Theory and analysis are emphasized throughout, with detailed descriptions of models available for vertical and horizontal geothermal heat exchangers. Key features: Explains geothermal energy systems that utilize ground energy in conjunction with heat pumps to provide heating and cooling, as well as related technologies such as thermal energy storage. Describes and discusses methods to model and analyze geothermal energy systems, and to determine their potential environmental impacts and thermal interactions. Covers various applications of geothermal energy systems. Takes a research orientated approach to provide coverage of the state of the art and emerging trends. Includes numerous illustrative examples and case studies. The book is key for researchers and practitioners working in geothermal energy, as well as graduate and advanced undergraduate students in departments of mechanical, civil, chemical, energy, environmental, process and industrial engineering.

Download or read book Decentralised Energy written by Christoph Burger and published by Ubiquity Press. This book was released on 2020-01-14 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: The energy system is undergoing a fundamental transformation – from fossil to renewable energy, from central power plants to distributed, decentralised generation facilities such as rooftop solar panels or wind parks, from utilities to private residents as producers of energy, and from analogue to digital. This book looks at the energy transformation from two complementary angles: governance and business model innovation. On the one side, governance is a decisive factor for the success of the transformation because it can act as an accelerator, or it can delay the process. On the other side, entrepreneurs and corporate decision-makers provide new business models for a decentralised energy world. Based on best practices, country studies and interviews with CEOs and founders of startups from all over the world, the “Global Game Changer” suggests eight key principles for political decision-makers to successfully implement the transformation, and six core competencies for corporate decision-makers to thrive in the new marketplace.

Download or read book Opportunities for Cogeneration with Nuclear Energy written by International Atomic Energy Agency and published by . This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication presents a comprehensive overview of various aspects relating to the application of cogeneration with nuclear energy, which may offer advantages such as increased efficiency, better cost effectiveness, and reduced environmental impact. The publication provides details on experiences, best practices and expectations for the foreseeable future of cogeneration with nuclear power technology and serves as a guide that supports newcomer countries. It includes information on systems and applications in various sectors, feasibility aspects, technical and economic details, and case studies.

Download or read book District Energy in Cities written by United Nations Publications and published by UN. This book was released on 2017-03-29 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report identifies modern district energy as the most effective approach for many cities to transition to sustainable heating and cooling, by improving energy efficiency and enabling higher shares of renewables. This publication is one of the first reports to provide concrete policy, finance and technology best-practice recommendations on addressing the heating and cooling sectors in cities through energy efficiency improvements and the integration of renewables, both of which are central to the energy transition. These recommendations have been developed in collaboration with 45 champion cities, all of which use district energy, with 11 of them using it to achieve 100 per cent renewables or carbon-neutral targets.