Download or read book Integrating the Automated Factory written by Steven A. Cousins and published by . This book was released on 1988 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Integration Technologies for Industrial Automated Systems written by Richard Zurawski and published by CRC Press. This book was released on 2018-10-03 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: If there exists a single term that summarizes the key to success in modern industrial automation, the obvious choice would be integration. Integration is critical to aligning all levels of an industrial enterprise and to optimizing each stratum in the hierarchy. While many books focus on the technological components of enterprise information systems, Integration Technologies for Industrial Automated Systems is the first book to present a comprehensive picture of the technologies, methodologies, and knowledge used to integrate seamlessly the various technologies underlying modern industrial automation and information systems. In chapters drawn from two of Zurawski's popular works, The Industrial Communication Technology Handbook and The Industrial Information Technology Handbook, this practical guide offers tutorials, surveys, and technology overviews contributed by experts from leading industrial and research institutions from around the world. The book is organized into sections for cohesive and comprehensive treatment. It examines e-technologies, software and IT technologies, communication network-based technologies, agent-based technologies, and security in detail as well as their role in the integration of industrial automated systems. For each of these areas, the contributors discuss emerging trends, novel solutions, and relevant standards. Charting the course toward more responsive and agile enterprise, Integration Technologies for Industrial Automated Systems gives you the tools to make better decisions and develop more integrated systems.
Download or read book Manufacturing written by Beno Benhabib and published by CRC Press. This book was released on 2003-07-03 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: From concept development to final production, this comprehensive text thoroughly examines the design, prototyping, and fabrication of engineering products and emphasizes modern developments in system modeling, analysis, and automatic control. This reference details various management strategies, design methodologies, traditional production techniqu
Download or read book Proceedings of the Third Symposium on Automated Integrated Circuits Manufacturing written by Joseph B. Anthony and published by . This book was released on 1988 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Manufacturing written by Beno Benhabib and published by CRC Press. This book was released on 2003-07-03 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: From concept development to final production, this comprehensive text thoroughly examines the design, prototyping, and fabrication of engineering products and emphasizes modern developments in system modeling, analysis, and automatic control. This reference details various management strategies, design methodologies, traditional production techniques, and assembly applications for clear illustration of manufacturing engineering technology in the modern age. Considers a variety of methods for product design including axiomatic design, design for X, group technology, and the Taguchi method, as well as modern production techniques including laser-beam machining, microlithography.
Download or read book Plant IT written by Dennis L. Brandl and published by Momentum Press. This book was released on 2012-11-14 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Information Technology (IT) is an important element of plant floor operations and Dennis Brandl’s monthly column on Manufacturing IT in Control Engineering magazine covers IT aspects that are critical to modern manufacturing. This book expands on the magazine’s explanations of the concepts and tools needed to achieve higher manufacturing productivity and efficiencies. Written for manufacturing professionals, the book overviews the wide range of IT elements underlying the manufacturing IT environment. It provides you with the information to be conversant in IT elements and to effectively manage and participate in manufacturing IT projects. Each chapter of the book discusses an IT issue that is important to a manufacturing company, including practical programming, real-world design considerations, databases and master data management, knowledge management, tools and programming languages, cyber security, managing resource information and regulations. And because software engineering is a foundation for all IT elements, this book also provides important points about software engineering and software project management for non-software engineers who must manage or participate in IT projects. Familiarity with all these topics will help you facilitate cooperation between manufacturing and IT professionals to achieve more effective implementations of plant floor operations IT— resulting in increased production productivity and product quality.
Download or read book Proceedings of the Fifth Symposium on Automated Integrated Circuits Manufacturing written by Vaughn E. Akins and published by . This book was released on 1990 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Integration of Robots into CIM written by Roger Bernard and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: From its inception in 1983, ESPRIT (the European Strategic Programme for Research and Development in Information Technology) has aimed at improving the competitiveness of European industry and providing it with the technology needed for the 1990s. Esprit Project 623, on which most of the work presented in this book is based, was one of the key projects in the ESPRIT area, Computer Integrated Manufacturing (CIM). From its beginnings in 1985, it brought together a team of researchers from industry, research institutes and universities to explore and develop a critical stream of advanced manufacturing technology that would be timely and mature for industrial exploitation in a five year time frame. The synergy of cross border collaboration between technology users and vendors has led to results ranging from new and improved products to training courses given at universities. The subject of Esprit Project 623 was the integration of robots into manufacturing environments. Robots are a vital element in flexible automation and can contribute substantially to manufacturing efficiency. The project had two main themes, off-line programming and robot system planning. Off-line programming enlarges the application area of robots and opens up new possibilities in domains such as laser cutting, and other hazardous operations. Reported benefits obtained from off-line program ming include: - significant cost reductions because re-programming eliminates robot down-time; - faster production cycles, in some cases time-savings of up to 85% are reported; - the optimal engineering of products with improved quality.
Download or read book Advances in Factories of the Future CIM and Robotics written by M. Cotsaftis and published by Elsevier. This book was released on 2013-10-22 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: Productivity enhancement is a major concern for all manufacturing enterprises. Productivity enhancement can be achieved in many ways and many facets of its problems have been investigated over the last decades. A number of methods, tools and technologies have emerged to efficiently increase productivity and rationalize management of manufacturing enterprises. International experts from both academia and industry share their experiences in this collection of articles, contributing to the latest advances in the many facets of productivity enhancement in manufacturing enterprises. Themes and visions are detailed on factories of the future, new management approaches, manufacturing system integration and manufacturing information systems. These technical areas can be grouped into four major sections: Factories of the future; Techniques and tools for automated manufacturing; Robotics; and Industrial applications. The papers illustrate a pattern of valuable and interesting approaches to the fascinating problem of designing a new generation of robots with high enough performance capabilities to be used in an industrial context.
Download or read book Computer Integrated Manufacturing written by Dr.R.Raghu Chand and published by Forschung Publications. This book was released on 2020-12-01 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers computer integrated manufacturing systems, analysis of automated flow line & line balancing, automated assembly systems, computerized manufacturing planning systems, CNC machining centers, and robotics.
Download or read book Proceedings of the Symposium on Automated Integrated Circuits Manufacturing written by and published by . This book was released on 1989 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computer Integrated Manufacturing written by Kiyoji Asai and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Current state of expectations is that Computer Integrated Manufacturing (CIM) will ulti mately determine the industrial growth of world nations within the next few decades. Computer Aided Design (CAD), Computer Aided Manufacturing (CAM), Flexible Manufacturing Systems (FMS), Robotics together with Knowledge and Information Based Systems (KIBS) and Com munication Networks are expected to develop to a mature state to respond effectively to the managerial requirements of the factories of the future that are becoming highly integrated and complex. CIM represents a new production approach which will allow the factories to deliver a high variety of products at a low cost and with short production cycles. The new technologies for CIM are needed to develop manufacturing environments that are smarter, faster, close-cou pled, integrated, optimized, and flexible. Sophistication and a high degree of specialization in materials science, artificial intelligence, communications technology and knowledge-information science techniques are needed among others for the development of realizable and workable CIM systems that are capable of adjusting to volatile markets. CIM factories are to allow the production of a wide variety of similar products in small batches through standard but multi mission oriented designs that accommodate flexibility with specialized software.
Download or read book Integrating Automatic Identification Systems for the Automated Factory written by Oscar Ernesto Pitti Araba and published by . This book was released on 1991 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Flexible Automation and Integrated Manufacturing 1993 written by M Ahmad and published by CRC Press. This book was released on 1993-09-21 with total page 1074 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the Flexible Automation and Integrated Manufacturing Conference held in Limerick, Ireland, in June 1993
Download or read book Computer Integrated Manufacturing written by R.U. Ayres and published by Springer Science & Business Media. This book was released on 1991-07-31 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: CIM (computer integrated manufacturing) is an acronym that has become fairly well known in recent years in manufacturing and related engineering circles. The purpose of the CIM Project at IIASA is to close the widening gap between the pace of technological, economic, and social events, on the one hand, and the progress of understanding those events, on the other.
Download or read book Automation Production Systems and Computer integrated Manufacturing written by Mikell P. Groover and published by . This book was released on 2001 with total page 888 pages. Available in PDF, EPUB and Kindle. Book excerpt: For advanced undergraduate/ graduate-level courses in Automation, Production Systems, and Computer-Integrated Manufacturing. This exploration of the technical and engineering aspects of automated production systems provides the most advanced, comprehensive, and balanced coverage of the subject of any text on the market. It covers all the major cutting-edge technologies of production automation and material handling, and how these technologies are used to construct modern manufacturing systems.
Download or read book Computer Integrated Manufacturing Iccim 91 Manufacturing Enterprises Of The 21st Century Proceedings Of The International Conference written by B S Lim and published by World Scientific. This book was released on 1991-10-02 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the 21st century, computer integrated manufacturing (CIM) systems will not only be the economic development tools but will also be the essential means of achieving a higher level of flexibility, cohesiveness and performance. CIM systems are beginning to settle into our society and industries, with greater emphasis on the integration of economic, cultural and social aspects together with design, planning, factory automation and artificial intelligent systems.This volume of proceedings brings together 10 keynote and invited speaker addresses, and over 180 papers by practitioners from 28 countries. It documents current research and in-depth studies on the fundamental aspects of advanced CIM systems and their practical applications. The papers fall into 3 main sections: CIM Related Issues; Industrial AI Applications Aspects; and Concurrent Engineering, Advanced Design, Simulation and Flexible Manufacturing Systems.
