Download or read book Integrating Oil Debris and Vibration Gear Damage Detection Technologies Using Fuzzy Logic written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-19 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: A diagnostic tool for detecting damage to spur gears was developed. Two different measurement technologies, wear debris analysis and vibration, were integrated into a health monitoring system for detecting surface fatigue pitting damage on gears. This integrated system showed improved detection and decision-making capabilities as compared to using individual measurement technologies. This diagnostic tool was developed and evaluated experimentally by collecting vibration and oil debris data from fatigue tests performed in the NASA Glenn Spur Gear Fatigue Test Rig. Experimental data were collected during experiments performed in this test rig with and without pitting. Results show combining the two measurement technologies improves the detection of pitting damage on spur gears. Dempsey, Paula J. and Afjeh, Abdollah A. Glenn Research Center NASA/TM-2002-211126, NAS 1.15:211126, E-12976
Download or read book Structural Health Monitoring Using Genetic Fuzzy Systems written by Prashant M. Pawar and published by Springer Science & Business Media. This book was released on 2011-07-09 with total page 135 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural health monitoring (SHM) has emerged as a prominent research area in recent years owing to increasing concerns about structural safety, and the need to monitor and extend the lives of existing structures. Structural Health Monitoring Using Genetic Fuzzy Systems elaborates the process of intelligent SHM development and implementation using the evolutionary system. The use of a genetic algorithm automates the development of the fuzzy system, and makes the method easy to use for problems involving a large number of measurements, damage locations and sizes; such problems being typical of SHM. The ideas behind fuzzy logic, genetic algorithms and genetic fuzzy systems are also explained. The functionality of the genetic fuzzy system architecture is elucidated within a case-study framework, covering: • SHM of beams; • SHM of composite tubes; and • SHM of helicopter rotor blades. Structural Health Monitoring Using Genetic Fuzzy Systems will be useful for aerospace, civil and mechanical engineers working with structures and structured components. It will also be useful for computer scientists and applied mathematicians interested in the application of genetic fuzzy systems to engineering problems.
Download or read book Proceedings of the 2015 International Conference on Electrical and Information Technologies for Rail Transportation written by Yong Qin and published by Springer. This book was released on 2016-03-10 with total page 785 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings collect the latest research trends, methods and experimental results in the field of electrical and information technologies for rail transportation. The topics cover intelligent computing, information processing, communication technology, automatic control, and their applications in rail transportation etc. The proceedings can be a valuable reference work for researchers and graduate students working in rail transportation, electrical engineering and information technologies.
Download or read book Prognostics and Health Management of Electronics written by Michael G. Pecht and published by John Wiley & Sons. This book was released on 2008-09-11 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book on Prognostics and Health Management of Electronics Recently, the field of prognostics for electronic products has received increased attention due to the potential to provide early warning of system failures, forecast maintenance as needed, and reduce life cycle costs. In response to the subject's growing interest among industry, government, and academic professionals, this book provides a road map to the current challenges and opportunities for research and development in Prognostics and Health Management (PHM). The book begins with a review of PHM and the techniques being developed to enable a prognostics approach for electronic products and systems. building on this foundation, the book then presents the state of the art in sensor systems for in-situ health and usage monitoring. Next, it discusses the various models and algorithms that can be utilized in PHM. Finally, it concludes with a discussion of the opportunities in future research. Readers can use the information in this book to: Detect and isolate faults Reduce the occurrence of No Fault Found (NFF) Provide advanced warning of system failures Enable condition-based (predictive) maintenance Obtain knowledge of load history for future design, qualification, and root cause analysis Increase system availability through an extension of maintenance cycles and/or timely repair actions Subtract life cycle costs of equipment from reduction in inspection costs, down time, and inventory Prognostics and Health Management of Electronics is an indispensable reference for electrical engineers in manufacturing, systems maintenance, and management, as well as design engineers in all areas of electronics.
Download or read book Finite Element Model Updating Using Computational Intelligence Techniques written by Tshilidzi Marwala and published by Springer Science & Business Media. This book was released on 2010-06-04 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: FEM updating allows FEMs to be tuned better to reflect measured data. It can be conducted using two different statistical frameworks: the maximum likelihood approach and Bayesian approaches. This book applies both strategies to the field of structural mechanics, using vibration data. Computational intelligence techniques including: multi-layer perceptron neural networks; particle swarm and GA-based optimization methods; simulated annealing; response surface methods; and expectation maximization algorithms, are proposed to facilitate the updating process. Based on these methods, the most appropriate updated FEM is selected, a problem that traditional FEM updating has not addressed. This is found to incorporate engineering judgment into finite elements through the formulations of prior distributions. Case studies, demonstrating the principles test the viability of the approaches, and. by critically analysing the state of the art in FEM updating, this book identifies new research directions.
Download or read book Soft Computing in Condition Monitoring and Diagnostics of Electrical and Mechanical Systems written by Hasmat Malik and published by Springer Nature. This book was released on 2020-01-17 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses a range of complex issues associated with condition monitoring (CM), fault diagnosis and detection (FDD) in smart buildings, wide area monitoring (WAM), wind energy conversion systems (WECSs), photovoltaic (PV) systems, structures, electrical systems, mechanical systems, smart grids, etc. The book’s goal is to develop and combine all advanced nonintrusive CMFD approaches on a common platform. To do so, it explores the main components of various systems used for CMFD purposes. The content is divided into three main parts, the first of which provides a brief introduction, before focusing on the state of the art and major research gaps in the area of CMFD. The second part covers the step-by-step implementation of novel soft computing applications in CMFD for electrical and mechanical systems. In the third and final part, the simulation codes for each chapter are included in an extensive appendix to support newcomers to the field.
Download or read book Diagnostics and Prognostics of Engineering Systems Methods and Techniques written by Kadry, Seifedine and published by IGI Global. This book was released on 2012-09-30 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Prognostics predicts an industrial systems lifespan using probability measurements to determine the way a machine operates. Prognostics are essential in determining being able to predict and stop failures before they occur. Therefore the development of dependable prognostic procedures for engineering systems is important to increase the systems performance and reliability. Diagnostics and Prognostics of Engineering Systems: Methods and Techniques provides widespread coverage and discussions on the methods and techniques of diagnosis and prognosis systems. Including practical examples to display the methods effectiveness in real-world applications as well as the latest trends and research, this reference source aims to introduce fundamental theory and practice for system diagnosis and prognosis.
Download or read book System Health Management written by Stephen B. Johnson and published by John Wiley & Sons. This book was released on 2011-06-01 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: System Health Management: with Aerospace Applications provides the first complete reference text for System Health Management (SHM), the set of technologies and processes used to improve system dependability. Edited by a team of engineers and consultants with SHM design, development, and research experience from NASA, industry, and academia, each heading up sections in their own areas of expertise and co-coordinating contributions from leading experts, the book collates together in one text the state-of-the-art in SHM research, technology, and applications. It has been written primarily as a reference text for practitioners, for those in related disciplines, and for graduate students in aerospace or systems engineering. There are many technologies involved in SHM and no single person can be an expert in all aspects of the discipline.System Health Management: with Aerospace Applications provides an introduction to the major technologies, issues, and references in these disparate but related SHM areas. Since SHM has evolved most rapidly in aerospace, the various applications described in this book are taken primarily from the aerospace industry. However, the theories, techniques, and technologies discussed are applicable to many engineering disciplines and application areas. Readers will find sections on the basic theories and concepts of SHM, how it is applied in the system life cycle (architecture, design, verification and validation, etc.), the most important methods used (reliability, quality assurance, diagnostics, prognostics, etc.), and how SHM is applied in operations (commercial aircraft, launch operations, logistics, etc.), to subsystems (electrical power, structures, flight controls, etc.) and to system applications (robotic spacecraft, tactical missiles, rotorcraft, etc.).
Download or read book Vibration Engineering and Technology of Machinery Volume II written by Rajiv Tiwari and published by Springer Nature. This book was released on with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gear Damage Detection Using Oil Debris Analysis written by and published by . This book was released on 2001 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Research Technology 2002 written by and published by DIANE Publishing. This book was released on with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Condition Monitoring and Diagnostic Engineering Management written by A. Starr and published by Elsevier. This book was released on 2001-09-14 with total page 1021 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Proceedings contains the papers presented at the 14th International Conference on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2001), held in Manchester, UK, on 4-6 September 2001. COMADEM 2001 builds on the excellent reputation of previous conferences in this series, and is essential for anyone working in the field of condition monitoring and maintenance management.The scope of the conference is truly interdisciplinary. The Proceedings contains papers from six continents, written by experts in industry and academia the world over, bringing together the latest thoughts on topics including: Condition-based maintenance Reliability centred maintenance Asset management Industrial case studies Fault detection and diagnosis Prognostics Non-destructive evaluation Integrated diagnostics Vibration Oil and debris analysis Tribology Thermal techniques Risk assessment Structural health monitoring Sensor technology Advanced signal processing Neural networks Multivariate statistics Data compression and fusion This Proceedings also contains a wealth of industrial case studies, and the latest developments in education, training and certification. For more information on COMADEM's aims and scope, please visit http://www.comadem.com
Download or read book Monthly Catalog of United States Government Publications written by and published by . This book was released on 2004 with total page 1004 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gear Damage Detection Using Oil Debris Analysis written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-19 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this paper was to verify, when using an oil debris sensor, that accumulated mass predicts gear pitting damage and to identify a method to set threshold limits for damaged gears. Oil debris data was collected from 8 experiments with no damage and 8 with pitting damage in the NASA Glenn Spur Gear Fatigue Rig. Oil debris feature analysis was performed on this data. Video images of damage progression were also collected from 6 of the experiments with pitting damage. During each test, data from an oil debris sensor was monitored and recorded for the occurrence of pitting damage. The data measured from the oil debris sensor during experiments with damage and with no damage was used to identify membership functions to build a simple fuzzy logic model. Using fuzzy logic techniques and the oil debris data, threshold limits were defined that discriminate between stages of pitting wear. Results indicate accumulated mass combined with fuzzy logic analysis techniques is a good predictor of pitting damage on spur gears. Dempsey, Paula J. Glenn Research Center NASA/TM-2001-210936, E-12789, NAS 1.15:210936
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2003 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NASA Tech Briefs written by and published by . This book was released on 2006 with total page 1286 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 40th AIAA ASME SAE ASEE Joint Propulsion Conference Exhibit July 11 14 2004 Fort Lauderdale FL 04 4000 04 4049 written by and published by . This book was released on 2004 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt:
