Download or read book Integrated Temperature Measurement and Control in Polymer Microfluidic Systems written by and published by . This book was released on 2003 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Real Time Integrated Paper Based Temperature Sensor for Lab on a Chip Device written by Vignesh Shekhar and published by . This book was released on 2017 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: Temperature measurement and manipulation is a critical factor in a wide range of applications like Point Of Care Diagnostics (POC's), Polymerase Chain Reaction (PCR), Temperature Gradient Focusing (TGF) to cite few prominent examples. In the past decade, researchers have used various techniques to sense and control the temperature in microfluidic systems. The primary challenge has been the twin problem of integration and accuracy using minimal equipment while keeping it simple. In this study, an equipment free fabrication of the temperature sensor using filter paper impregnated with p-type colloidal PbS quantum dots is demonstrated. This sensor is later integrated into line a PDMS microfluidic device with two parallel microfluidic channels. The integrated device is chiefly to sense the difference in temperature of fluids inside the two channels. COMSOL Multiphysics 5.1 is used to simulate the single-phase laminar fluid flow and heat transfer in the microchannel of the device. The design of the microfluidic channel is optimized to decrease heat sensing times of the sensor using the simulation results.
Download or read book Journal of Research of the National Institute of Standards and Technology written by and published by . This book was released on 2004 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reports NIST research and development in the physical and engineering sciences in which the Institute is active. These include physics, chemistry, engineering, mathematics, and computer sciences. Emphasis on measurement methodology and the basic technology underlying standardization.
Download or read book Embedded MicroHeating Elements written by and published by DIANE Publishing. This book was released on with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Micro Total Analysis Systems 2002 written by Yoshinobu Baba and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Sixth International Conference on Miniaturized Chemical and Biochemical Analysis Systems, known as IlTAS2002, will be fully dedicated to the latest scientific and technological developments in the field of miniaturized devices and systems for realizing not only chemical and biochemical analysis but also synthesis. The first IlTAS meeting was held in Enschede in 1994 with approximately 160 participants, bringing together the scientists with background in analytical and biochemistry with those with Micro Electro Mechanical Systems (MEMS) in one workshop. We are grateful to Piet Bergveld and Albert van den Berg of MESA Research Institute of the University of Twente for their great efforts to arrange this exciting first meeting. The policy of the meeting was succeeded by late Prof. Dr. Michael Widmer in the second meeting, IlTAS'96 held in Basel with 275 participants. The first two meetings were held as informal workshops. From the third workshop, IlTAS'98 (420 participants) held in Banff, the workshop had become a worldwide conference. Participants continued to increase in IlTAS2000 (about 500 participants) held in Enschede and IlTAS2001 (about 700 participants) held in Monterey. The number of submitted papers also dramatically increased in this period from 130 in 1998, 230 in 2000 to nearly 400 in 2001. From 2001, IlTAS became an annual symposium. The steering committee meeting held in Monterey, confirmed the policy of former IlTAS that quality rather than quantity would be the key-point and that the parallel-session format throughout the 3.
Download or read book Design Fabrication and Measurement of Microfluidic Devices with Integrated Carbon Nanotube Sensors written by Jiheng Zhao and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microfluidic Technologies for Miniaturized Analysis Systems written by Steffen Hardt and published by Springer Science & Business Media. This book was released on 2007-09-29 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses Lab-on-a-Chip devices. It focuses on microfluidic technologies that have emerged in the past decade. Coverage presents a comprehensive listing of the most promising microfluidic technologies in the Lab-on-a-Chip field. It also details technologies that can be viewed as toolboxes needed to set up complex Lab-on-a-Chip systems.
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2008 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Highly Integrated Microfluidics Design written by Dan E. Angelescu and published by Artech House. This book was released on 2011 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: The recent development of microfluidics has lead to the concept of lab-on-a-chip, where several functional blocks are combined into a single device that can perform complex manipulations and characterizations on the microscopic fluid sample. However, integration of multiple functionalities on a single device can be complicated. This a cutting-edge resource focuses on the crucial aspects of integration in microfluidic systems. It serves as a one-stop guide to designing microfluidic systems that are highly integrated and scalable. This practical book covers a wide range of critical topics, from fabrication techniques and simulation tools, to actuation and sensing functional blocks and their inter-compatibility. This unique reference outlines the benefits and drawbacks of different approaches to microfluidic integration and provides a number of clear examples of highly integrated microfluidic systems.
Download or read book Comprehensive Biotechnology written by and published by Newnes. This book was released on 2011-08-26 with total page 5304 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Comprehensive Biotechnology, Six Volume Set continues the tradition of the first inclusive work on this dynamic field with up-to-date and essential entries on the principles and practice of biotechnology. The integration of the latest relevant science and industry practice with fundamental biotechnology concepts is presented with entries from internationally recognized world leaders in their given fields. With two volumes covering basic fundamentals, and four volumes of applications, from environmental biotechnology and safety to medical biotechnology and healthcare, this work serves the needs of newcomers as well as established experts combining the latest relevant science and industry practice in a manageable format. It is a multi-authored work, written by experts and vetted by a prestigious advisory board and group of volume editors who are biotechnology innovators and educators with international influence. All six volumes are published at the same time, not as a series; this is not a conventional encyclopedia but a symbiotic integration of brief articles on established topics and longer chapters on new emerging areas. Hyperlinks provide sources of extensive additional related information; material authored and edited by world-renown experts in all aspects of the broad multidisciplinary field of biotechnology Scope and nature of the work are vetted by a prestigious International Advisory Board including three Nobel laureates Each article carries a glossary and a professional summary of the authors indicating their appropriate credentials An extensive index for the entire publication gives a complete list of the many topics treated in the increasingly expanding field
Download or read book Integrated Nanoneedle microfluidic System for Single Cell Intracellular Temperature Measurement written by Salma Abdullah Shaaban Binsilm and published by . This book was released on 2015 with total page 107 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of IEEE Sensors written by and published by . This book was released on 2002 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Highly integrated Polymer based Microfluidic Device for Disposable Applications written by Emil John Geiger and published by . This book was released on 2008 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Encyclopedia of Microfluidics and Nanofluidics written by Dongqing Li and published by Springer Science & Business Media. This book was released on 2008-08-06 with total page 2242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering all aspects of transport phenomena on the nano- and micro-scale, this encyclopedia features over 750 entries in three alphabetically-arranged volumes including the most up-to-date research, insights, and applied techniques across all areas. Coverage includes electrical double-layers, optofluidics, DNC lab-on-a-chip, nanosensors, and more.
Download or read book Microfluidics written by Sagnik Basuray and published by Springer Science & Business Media. This book was released on 2011-10-05 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flow Control Methods and Devices in Micrometer Scale Channels, by Shuichi Shoji and Kentaro Kawai. Micromixing Within Microfluidic Devices, by Lorenzo Capretto, Wei Cheng, Martyn Hill and Xunli Zhang. Basic Technologies for Droplet Microfluidics, by Shaojiang Zeng, Xin Liu, Hua Xie and Bingcheng Lin. Electrorheological Fluid and Its Applications in Microfluidics, by Limu Wang, Xiuqing Gong and Weijia Wen. Biosensors in Microfluidic Chips, by Jongmin Noh, Hee Chan Kim and Taek Dong Chung. A Nanomembrane-Based Nucleic Acid Sensing Platform for Portable Diagnostics, by Satyajyoti Senapati, Sagnik Basuray, Zdenek Slouka, Li-Jing Cheng and Hsueh-Chia Chang. Optical Detection Systems on Microfluidic Chips, by Hongwei Gai, Yongjun Li and Edward S. Yeung. Integrated Microfluidic Systems for DNA Analysis, by Samuel K. Njoroge, Hui-Wen Chen, Małgorzata A. Witek and Steven A. Soper. Integrated Multifunctional Microfluidics for Automated Proteome Analyses, by John K. Osiri, Hamed Shadpour, Małgorzata A. Witek and Steven A. Soper. Cells in Microfluidics, by Chi Zhang and Danny van Noort. Microfluidic Platform for the Study of Caenorhabditis elegans,by Weiwei Shi, Hui Wen, Bingcheng Lin and Jianhua Qin.
Download or read book More than Moore written by Guo Qi Zhang and published by Springer Science & Business Media. This book was released on 2010-01-23 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past decades, the mainstream of microelectronics progression was mainly powered by Moore's law focusing on IC miniaturization down to nano scale. However, there is a fast increasing need for "More than Moore" (MtM) products and technology that are based upon or derived from silicon technologies, but do not simply scale with Moore’s law. This book provides new vision, strategy and guidance for the future technology and business development of micro/nanoelectronics.
Download or read book CVD Polymers written by Karen K. Gleason and published by John Wiley & Sons. This book was released on 2015-03-05 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: The method of CVD (chemical vapor deposition) is a versatile technique to fabricate high-quality thin films and structured surfaces in the nanometer regime from the vapor phase. Already widely used for the deposition of inorganic materials in the semiconductor industry, CVD has become the method of choice in many applications to process polymers as well. This highly scalable technique allows for synthesizing high-purity, defect-free films and for systematically tuning their chemical, mechanical and physical properties. In addition, vapor phase processing is critical for the deposition of insoluble materials including fluoropolymers, electrically conductive polymers, and highly crosslinked organic networks. Furthermore, CVD enables the coating of substrates which would otherwise dissolve or swell upon exposure to solvents. The scope of the book encompasses CVD polymerization processes which directly translate the chemical mechanisms of traditional polymer synthesis and organic synthesis in homogeneous liquids into heterogeneous processes for the modification of solid surfaces. The book is structured into four parts, complemented by an introductory overview of the diverse process strategies for CVD of polymeric materials. The first part on the fundamentals of CVD polymers is followed by a detailed coverage of the materials chemistry of CVD polymers, including the main synthesis mechanisms and the resultant classes of materials. The third part focuses on the applications of these materials such as membrane modification and device fabrication. The final part discusses the potential for scale-up and commercialization of CVD polymers.
