Download or read book Modelling and Simulation of Integrated Systems in Engineering written by D J Murray-Smith and published by Elsevier. This book was released on 2012-05-30 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book places particular emphasis on issues of model quality and ideas of model testing and validation. Mathematical and computer-based models provide a foundation for explaining complex behaviour, decision-making, engineering design and for real-time simulators for research and training. Many engineering design techniques depend on suitable models, assessment of the adequacy of a given model for an intended application is therefore critically important. Generic model structures and dependable libraries of sub-models that can be applied repeatedly are increasingly important. Applications are drawn from the fields of mechanical, aeronautical and control engineering, and involve non-linear lumped-parameter models described by ordinary differential equations. - Focuses on issues of model quality and the suitability of a given model for a specific application - Multidisciplinary problems within engineering feature strongly in the applications - The development and testing of nonlinear dynamic models is given very strong emphasis

Download or read book Yield Simulation for Integrated Circuits written by D.M. Walker and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the summer of 1981 I was asked to consider the possibility of manufacturing a 600,000 transistor microprocessor in 1985. It was clear that the technology would only be capable of manufacturing 100,000-200,000 transistor chips with acceptable yields. The control store ROM occupied approximately half of the chip area, so I considered adding spare rows and columns to increase ROM yield. Laser-programmed polysilicon fuses would be used to switch between good and bad circuits. Since only half the chip area would have redundancy, I was concerned that the increase in yield would not outweigh the increased costs of testing and redundancy programming. The fabrication technology did not yet exist, so I was unable to experimentally verify the benefits of redundancy. When the technology did become available, it would be too late in the development schedule to spend time running test chips. The yield analysis had to be done analytically or by simulation. Analytic yield analysis techniques did not offer sufficient accuracy for dealing with complex structures. The simulation techniques then available were very labor-intensive and seemed more suitable for redundant memories and other very regular structures [Stapper 80J. I wanted a simulator that would allow me to evaluate the yield of arbitrary redundant layouts, hence I termed such a simulator a layout or yield simulator. Since I was unable to convince anyone to build such a simulator for me, I embarked on the research myself.

Download or read book Analog Integrated Circuit Design by Simulation Techniques Tools and Methods written by Ugur Cilingiroglu and published by McGraw Hill Professional. This book was released on 2019-03-29 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn the principles and practices of simulation-based analog IC design This comprehensive textbook and on-the-job reference offers clear instruction on analog integrated circuit design using the latest simulation techniques. Ideal for graduate students and professionals alike, the book shows, step by step, how to develop and deploy integrated circuits for cutting-edge Internet of Things (IoT) and other applications. Analog Integrated Circuit Design by Simulation: Techniques, Tools, and Methods lays out practical, ready-to-apply engineering strategies. Application layer, device layer, and circuit layer IC design are covered in complete detail. You will learn how to tackle real-world design problems and avoid long cycles of trial and error. Coverage includes: First-order DC response Unified closed-loop model Accurate modeling of DC response Frequency and step response Multi-pole dynamic response and stability Effect of external network on differential gain Continuous-time and discrete-time amplifiers MOSFET, NMOS, and PMOS characteristics Small-signal modeling and circuit analysis Resistor and capacitor design Current sources, sinks, and mirrors Basic, symmetrical, folded-cascode, and Miller OTAs Opamps with source-follower and common-source output stages Fully differential OTAs and opamps

Download or read book Integrated Design and Simulation of Chemical Processes written by Alexandre C. Dimian and published by Elsevier. This book was released on 2014-09-18 with total page 887 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive work shows how to design and develop innovative, optimal and sustainable chemical processes by applying the principles of process systems engineering, leading to integrated sustainable processes with 'green' attributes. Generic systematic methods are employed, supported by intensive use of computer simulation as a powerful tool for mastering the complexity of physical models. New to the second edition are chapters on product design and batch processes with applications in specialty chemicals, process intensification methods for designing compact equipment with high energetic efficiency, plantwide control for managing the key factors affecting the plant dynamics and operation, health, safety and environment issues, as well as sustainability analysis for achieving high environmental performance. All chapters are completely rewritten or have been revised. This new edition is suitable as teaching material for Chemical Process and Product Design courses for graduate MSc students, being compatible with academic requirements world-wide. The inclusion of the newest design methods will be of great value to professional chemical engineers. - Systematic approach to developing innovative and sustainable chemical processes - Presents generic principles of process simulation for analysis, creation and assessment - Emphasis on sustainable development for the future of process industries

Download or read book Integrated Power Devices and TCAD Simulation written by Yue Fu and published by CRC Press. This book was released on 2017-12-19 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: From power electronics to power integrated circuits (PICs), smart power technologies, devices, and beyond, Integrated Power Devices and TCAD Simulation provides a complete picture of the power management and semiconductor industry. An essential reference for power device engineering students and professionals, the book not only describes the physics inside integrated power semiconductor devices such lateral double-diffused metal oxide semiconductor field-effect transistors (LDMOSFETs), lateral insulated-gate bipolar transistors (LIGBTs), and super junction LDMOSFETs but also delivers a simple introduction to power management systems. Instead of abstract theoretical treatments and daunting equations, the text uses technology computer-aided design (TCAD) simulation examples to explain the design of integrated power semiconductor devices. It also explores next generation power devices such as gallium nitride power high electron mobility transistors (GaN power HEMTs). Including a virtual process flow for smart PIC technology as well as a hard-to-find technology development organization chart, Integrated Power Devices and TCAD Simulation gives students and junior engineers a head start in the field of power semiconductor devices while helping to fill the gap between power device engineering and power management systems.

Download or read book Comprehensive Healthcare Simulation Improving Healthcare Systems written by Ellen S. Deutsch and published by Springer Nature. This book was released on 2021-07-22 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents simulation as an essential, powerful tool to develop the best possible healthcare system for patients. It provides vital insights into the necessary steps for supporting and enhancing medical care through the simulation methodology. Organized into four sections, the book begins with a discussion on the overarching principles of simulation and systems. Section two then delves into the practical applications of simulation, including developing new workflows, utilizing new technology, building teamwork, and promoting resilience. Following this, section three examines the transition of ideas and initiatives into everyday practices. Chapters in this section analyze complex interpersonal topics such as how healthcare clinical stakeholders, simulationists, and experts who are non-clinicians can collaborate. The closing section explores the potential future directions of healthcare simulation, as well as leadership engagement. A new addition to the Comprehensive Healthcare Simulation Series, Improving Healthcare Systems stimulates the critical discussion of new and innovative concepts and reinforces well-established and germane principles.

Download or read book Dynamic Biosystem Modeling Simulation Methodology Integrated Accessible written by Joseph Distefano, 3rd and published by . This book was released on 2019-09-16 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is uniquely crafted for use in teaching undergraduate students in the life, math, computer and other sciences and engineering. It is INTRODUCTORY LEVEL, for students who have taken or are currently completing their undergraduate math requirements, and are acquiring analytical-thinking and doing skills, along with introductory biology, chemistry and physics subject matter. It's about learning HOW to model and simulate dynamic biological systems, which also makes it useful for graduate students and professional researchers who want a more rigorous treatment of introductory life science math modeling, integrated with the biology. It brings together the multidisciplinary pedagogy of these subjects into a SINGLE INTRODUCTORY MODELING METHODOLOGY COURSE, crystalizing the experience of an author who has been teaching dynamic biosystems modeling and simulation methodology for the life sciences for more than 50 years. DiStefano maximizes accessibility and "systems-math-biology" integration - without diminishing conceptual rigor. Minimally essential applied math and SYSTEMS ENGINEERING METHODS are included, along with a synopsis of the biology and physiology underlying dynamic biosystem modeling, all in a modeling pedagogy context. This textbook fills a major need in the training of contemporary biology students.Dynamic biosystems modeling methodology is presented over 12 distinctive chapters, primarily with systems diagrams and simple differential equations and algebra for expressing them quantitatively, integrated with the biology. Solving and analyzing (quantifying) the biomodels are then accomplished by simulation, using a facile control system simulation language Simulink, a GUI/Matlab toolbox that emulates control systems diagramming, rather than by "coding" the model in a standard computer programming language. Students see and work with the system model - not the code - a big plus. Higher math and complex analytical solutions are avoided.Each chapter begins with a list of LEARNING GOALS, to help with both perspective for the chapter material, and retrospective, to measure learning. EXERCISES for the student at the end of each chapter are designed to test and reinforce learning. A SOLUTIONS MANUAL for chapter exercises is available to qualified instructors from the author, as are LECTURE SLIDES and LAB ASSIGNMENTS AND SOLUTIONS, for courses that adopt the textbook for student use.

Download or read book Computer Simulation written by Roger McHaney and published by Academic Press. This book was released on 1991-08-07 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simulation overview; Evolution of modern computer simulation; Simulation in the real world; Six symptoms of a sick simulation; The professional simulation analyst; Building a simulation the right way; Learning a simulation language; Simple queuing systems; Advanced topics; Applying the process.

Download or read book Understanding Computer Simulation written by Roger McHaney and published by Bookboon. This book was released on 2009 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Simulation Techniques and Solutions for Mixed Signal Coupling in Integrated Circuits written by Nishath K. Verghese and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of putting `systems on a chip' has been a difficult challenge that is only recently being met. Since the world is `analog', putting systems on a chip requires putting analog interfaces on the same chip as digital processing functions. Since some processing functions are accomplished more efficiently in analog circuitry, chips with a large amount of analog and digital circuitry are being designed. Whether a small amount of analog circuitry is combined with varying amounts of digital circuitry or the other way around, the problem encountered in marrying analog and digital circuitry are the same but with different scope. Some of the most prevalent problems are chip/package capacitive and inductive coupling, ringing on the RLC tuned circuits that form the chip/package power supply rails and off-chip drivers and receivers, coupling between circuits through the chip substrate bulk, and radiated emissions from the chip/package interconnects. To aggravate the problems of designers who have to deal with the complexity of mixed-signal coupling there is a lack of verification techniques to simulate the problem. In addition to considering RLC models for the various chip/package/board level parasitics, mixed-signal circuit designers must also model coupling through the common substrate when simulating ICs to obtain an accurate estimate of coupled noise in their designs. Unfortunately, accurate simulation of substrate coupling has only recently begun to receive attention, and techniques for the same are not widely known. Simulation Techniques and Solutions for Mixed-Signal Coupling in Integrated Circuits addresses two major issues of the mixed-signal coupling problem -- how to simulate it and how to overcome it. It identifies some of the problems that will be encountered, gives examples of actual hardware experiences, offers simulation techniques, and suggests possible solutions. Readers of this book should come away with a clear directive to simulate their design for interactions prior to building the design, versus a `build it and see' mentality.

Download or read book Simulation Modeling written by Constantin Volosencu and published by BoD – Books on Demand. This book was released on 2022-01-19 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents some recent specialized works of a theoretical and practical nature in the field of simulation modeling, which is being addressed to a large number of specialists, mathematicians, doctors, engineers, economists, professors, and students. The book comprises 11 chapters that promote modern mathematical algorithms and simulation modeling techniques, in practical applications, in the following thematic areas: mathematics, biomedicine, systems of systems, materials science and engineering, energy systems, and economics. This project presents scientific papers and applications that emphasize the capabilities of simulation modeling methods, helping readers to understand the phenomena that take place in the real world, the conditions of their development, and their effects, at a high scientific and technical level. The authors have published work examples and case studies that resulted from their researches in the field. The readers get new solutions and answers to questions related to the emerging applications of simulation modeling and their advantages.

Download or read book Coasters Etc written by Maureen L. Margolies and published by Thomson South-Western. This book was released on 1997-08-25 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coasters, Etc. is a beginning-level integrated application simulation. This simulation integrates administrative, written communication, and technological skills required to take the user into the 21st century. Working in the marketing department at the amusement park, Coasters, Etc. students work with Internet, E-mail, electronic scheduling, presentation graphics, and other computerized activities utilizing word processing, spreadsheet, database, and desktop publishing software.

Download or read book The Comprehensive Textbook of Healthcare Simulation written by Adam I. Levine and published by Springer Science & Business Media. This book was released on 2013-06-18 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Comprehensive Textbook of Healthcare Simulation is a cohesive, single-source reference on all aspects of simulation in medical education and evaluation. It covers the use of simulation in training in each specialty and is aimed at healthcare educators and administrators who are developing their own simulation centers or programs and professional organizations looking to incorporate the technology into their credentialing process. For those already involved in simulation, the book will serve as a state-of-the-art reference that helps them increase their knowledge base, expand their simulation program’s capabilities, and attract new, additional target learners. Features: • Written and edited by pioneers and experts in healthcare simulation • Personal memoirs from simulation pioneers • Each medical specialty covered • Guidance on teaching in the simulated environment • Up-to-date information on current techniques and technologies • Tips from “insiders” on funding, development, accreditation, and marketing of simulation centers • Floor plans of simulation centers from across the United States • Comprehensive glossary of terminology

Download or read book Comprehensive Healthcare Simulation InterProfessional Team Training and Simulation written by John T. Paige and published by Springer Nature. This book was released on 2020-01-31 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on InterProfessional (IP) Team Training and Simulation, from basic concepts to the practical application of IP in different healthcare settings. It thoroughly and comprehensively covers the role of simulation in healthcare, human factors in healthcare, challenges to conducting simulation-based IP, logistics, and applications of simulation-based IP in clinical practice. Supplemented by high-quality figures and tables, readers are introduced to the different simulation modalities and technologies employed in IP team training and are guided on the use of simulation within IP teams. Part of the authoritative Comprehensive Healthcare Simulation Series, InterProfessional Team Training and Simulation can be used in training for a variety of learners, including medical students, residents, practicing physicians, nurses, and health-related professionals.

Download or read book Integrating Geographic Information Systems and Agent Based Modeling Techniques for Simulating Social and Ecological Processes written by H. Randy Gimblett and published by Oxford University Press. This book was released on 2002-01-17 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents a set of coherent, cross-referenced perspectives on incorporating the spatial representation and analytical power of GIS with agent-based modelling of evolutionary and non-linear processes and phenomena. Many recent advances in software algorithms for incorporating geographic data in modeling social and ecological behaviors, and successes in applying such algorithms, had not been adequately reported in the literature. This book seeks to serve as the standard guide to this broad area.

Download or read book Enterprise Engineering and Integration Building International Consensus written by Kurt Kosanke and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: ICEIMT '97 is the second International Conference on Enterprise Integration and Modeling Technology. Like the first, it is the main event of a European-US initiative on building consensus in enterprise engineering and integration - supported in Europe by Esprit and in the USA by DOC/NIST. These proceedings contain papers presented at the conference and at five international workshops preceding the conference. The workshops addressed integration issues related to people and organization, metrics and standardization, applications, fundamentals and principles, and users and vendors. The conference papers present points of view of users, vendors, and researchers, the current state of research and development worldwide, and the needs to be identified and summarized in project proposals.

Download or read book Modeling and Simulation of Discrete Event Systems written by Byoung Kyu Choi and published by John Wiley & Sons. This book was released on 2013-09-30 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer modeling and simulation (M&S) allows engineers to study and analyze complex systems. Discrete-event system (DES)-M&S is used in modern management, industrial engineering, computer science, and the military. As computer speeds and memory capacity increase, so DES-M&S tools become more powerful and more widely used in solving real-life problems. Based on over 20 years of evolution within a classroom environment, as well as on decades-long experience in developing simulation-based solutions for high-tech industries, Modeling and Simulation of Discrete-Event Systems is the only book on DES-M&S in which all the major DES modeling formalisms – activity-based, process-oriented, state-based, and event-based – are covered in a unified manner: A well-defined procedure for building a formal model in the form of event graph, ACD, or state graph Diverse types of modeling templates and examples that can be used as building blocks for a complex, real-life model A systematic, easy-to-follow procedure combined with sample C# codes for developing simulators in various modeling formalisms Simple tutorials as well as sample model files for using popular off-the-shelf simulators such as SIGMA®, ACE®, and Arena® Up-to-date research results as well as research issues and directions in DES-M&S Modeling and Simulation of Discrete-Event Systems is an ideal textbook for undergraduate and graduate students of simulation/industrial engineering and computer science, as well as for simulation practitioners and researchers.