Download or read book Integrated Multi Sensor System for Parallel In Situ Monitoring of Biotechnological Processes written by Stefan Mross and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Integrated Multi sensor System for Parallel In situ Monitoring of Cell Nutrients Metabolites and Cell Mass in Biotechnological Processes written by Stefan Mross and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Label Free Monitoring of Cells in vitro written by Joachim Wegener and published by Springer Nature. This book was released on 2019-11-18 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is dedicated to label-free, non-invasive monitoring of cell-based assays and it comprises the most widely applied techniques. Each approach is described and critically evaluated by an expert in the field such that researchers get an overview on what is possible and where the limitations are. The book provides the theoretical basis for each technique as well as the most successful and exciting applications. Label-free bioanalytical techniques have been known for a long time as valuable tools to monitor adsorption processes at the solid-liquid interface in general – and biomolecular interaction analysis (BIA) in particular. The underlying concepts have been progressively transferred to the analysis of cell-based assays. The strength of these approaches is implicitly given with the name 'label-free': the readout is independent of any label, reagent or additive that contaminates the system under study and potentially affects its properties. Thus, label-free techniques provide an unbiased analytical perspective in the sense that the sample is not manipulated by additives but pure. They are commonly based on physical principles and read changes in integral physical properties of the sample like refractive index, conductivity, capacitance or elastic modulus to mention just a few. Even though it is not implied in the name, label-free approaches usually monitor the cells under study non-invasively meaning that the amplitude of the signal (e.g. electric field strength, mechanical elongation) that is used for the measurement is too low to interfere or affect. In contrast to label-based analytical techniques that are commonly restricted to a single reading at a predefined time point, label-free approaches allow for a continuous observation so that the dynamics of the biological system or reaction become accessible.
Download or read book Multifunctional Sensors written by Bansari Deb Majumder and published by CRC Press. This book was released on 2023-08-31 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a detailed overview of multifunctional sensors, covering discussions on different types of multifunctional sensors developed in past years. As a case study, the development of admittance-type multifunctional sensors is provided, constituting its construction, working principles, measurements, and instrumentation used. It also explores a review of the research in the field from 1990 to 2022. It will be a useful resource for researchers of sensor technologies across physics, engineering, and other physical sciences. Key Features • Presents a case study of a multifunctional sensor that measures temperature and level simultaneously. • Discusses latest trends in the area and can be understood by advanced students up to research level scholars. • Looks ahead to the future of these sensors for further research opportunities.
Download or read book Current Developments in Biotechnology and Bioengineering written by Ashok Pandey and published by Elsevier. This book was released on 2022-08-18 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Bioprocess Engineering, the latest release in the Current Developments in Biotechnology and Bioengineering series, provides a comprehensive overview of bioprocess systems, kinetics, bioreactor design, batch and continuous reactors and introduces key principles that enable bioprocess engineers to engage in analysis, optimization and design with consistent control over biological and chemical transformations. The bioprocessing sector is also updating its technologies with state-of-the art techniques to keep up with the rising demand of the industry and R&D. This book covers these aspects, taking readers through a step-by-step journey of bioprocessing while also guiding them towards a new era and future. Covers state-of-the-art, technological advancements in the field of bioprocessing Includes design and scale-up of bioreactors, monitoring and control systems, advances in upstream and downstream processing Includes design and development of fermentation processes such as the suitability of experimental design, full factorial, central composite design, Box-Behnken, Plackett-Burman, and more
Download or read book Sensing Technologies for Real Time Monitoring of Water Quality written by Libu Manjakkal and published by John Wiley & Sons. This book was released on 2023-11-14 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to the development and application of smart sensing technologies for water and food quality monitoring With contributions from a panel of experts on the topic, Sensing Technologies for Real Time Monitoring of Water Quality offers an authoritative resource that explores a complete set of sensing technologies designed to monitor, in real time, water and food (aquaculture) quality. The contributing authors explore the fundamentals of sensing technologies and review the most recent advances of various materials and sensors for water quality monitoring. This comprehensive resource includes information on a range of designs of smart electronics, communication systems, packaging, and innovative implementation approaches used for remote monitoring of water quality in various atmospheres. The book explores a variety of techniques for data analysis of the sensors as well as contains artificial intelligence, big data technologies, and machine learning approaches used for monitoring and evaluation. In addition, this indispensible resource highlights sustainable environmental and policy issues, including ways for food and water managers to can help to reduce their carbon footprint. This important book: Puts the spotlight on the potential capabilities and the limitations of various sensing technologies and wireless systems Offers an evaluation of a variety of sensing materials, substrates, and designs of sensors Includes information on the common characteristics, ideas, and approaches of water quality and quantity management Presents techniques for manager for reducing their carbon footprint Written for students and practitioners/researchers in food and water quality management, Sensing Technologies for Real Time Monitoring of Water Quality offers, in one volume, a guide to the real time sensing techniques that can improve water and food quality.
Download or read book Impact of Nanoscience in the Food Industry written by Alexandru Mihai Grumezescu and published by Academic Press. This book was released on 2018-01-20 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Impact of Nanoscience in the Food Industry, Volume 12 in The Handbook of Food Bioengineering series, explores how nanoscience applications in food engineering offer an alternative to satisfying current food needs that cannot be fulfilled by natural products. Nanotechnology enables the development of tailored food ingredients and structures to replace products that are difficult to obtain. The book discusses how specialized nano-preservatives, sensors and food degradation and contamination detectors were developed and how they can be introduced in food products without degrading quality or properties of the final product. A valuable resource for food engineering researchers and students alike. Identifies common nanomaterials used in food preservation and food packaging Provides industrial applications to increase food production Describes analytical methods for assessing food safety Identifies how nanoscience advances allow for new developments in functional foods and nutraceuticals Discusses safety concerns, regulations and restricted use of nanomaterials in food bioengineering
Download or read book Advanced Sensors for Real Time Monitoring Applications written by Olga Korostynska and published by MDPI. This book was released on 2021-03-09 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is impossible to imagine the modern world without sensors, or without real-time information about almost everything—from local temperature to material composition and health parameters. We sense, measure, and process data and act accordingly all the time. In fact, real-time monitoring and information is key to a successful business, an assistant in life-saving decisions that healthcare professionals make, and a tool in research that could revolutionize the future. To ensure that sensors address the rapidly developing needs of various areas of our lives and activities, scientists, researchers, manufacturers, and end-users have established an efficient dialogue so that the newest technological achievements in all aspects of real-time sensing can be implemented for the benefit of the wider community. This book documents some of the results of such a dialogue and reports on advances in sensors and sensor systems for existing and emerging real-time monitoring applications.
Download or read book Chemical Abstracts written by and published by . This book was released on 2002 with total page 2710 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cell Culture Technology for Pharmaceutical and Cell Based Therapies written by Sadettin Ozturk and published by CRC Press. This book was released on 2005-08-30 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited by two of the most distinguished pioneers in genetic manipulation and bioprocess technology, this bestselling reference presents a comprehensive overview of current cell culture technology used in the pharmaceutical industry. Contributions from several leading researchers showcase the importance of gene discovery and genomic technology devel
Download or read book ASEE Profiles of Engineering Engineering Technology Colleges written by and published by . This book was released on 1998 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Principles Of Bioseparations Engineering written by Raja Ghosh and published by World Scientific Publishing Company. This book was released on 2006-10-23 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioseparations engineering deals with the scientific and engineering principles involved in large-scale separation and purification of biological products. It is a key component of most chemical engineering/biotechnology/bioprocess engineering programmes. This book discusses the underlying principles of bioseparations engineering written from the perspective of an undergraduate course. It covers membrane based bioseparations in much more detail than some of the other books on bioseparations engineering. Based largely on the lecture notes the author developed to teach the course, this book is especially suitable for use as an undergraduate level textbook, as most other textbooks are targeted at graduate students.
Download or read book Single Use Technology in Biopharmaceutical Manufacture written by Regine Eibl and published by John Wiley & Sons. This book was released on 2019-07-18 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authoritative guide to the principles, characteristics, engineering aspects, economics, and applications of disposables in the manufacture of biopharmaceuticals The revised and updated second edition of Single-Use Technology in Biopharmaceutical Manufacture offers a comprehensive examination of the most-commonly used disposables in the manufacture of biopharmaceuticals. The authors—noted experts on the topic—provide the essential information on the principles, characteristics, engineering aspects, economics, and applications. This authoritative guide contains the basic knowledge and information about disposable equipment. The author also discusses biopharmaceuticals’ applications through the lens of case studies that clearly illustrate the role of manufacturing, quality assurance, and environmental influences. This updated second edition revises existing information with recent developments that have taken place since the first edition was published. The book also presents the latest advances in the field of single-use technology and explores topics including applying single-use devices for microorganisms, human mesenchymal stem cells, and T-cells. This important book: • Contains an updated and end-to-end view of the development and manufacturing of single-use biologics • Helps in the identification of appropriate disposables and relevant vendors • Offers illustrative case studies that examine manufacturing, quality assurance, and environmental influences • Includes updated coverage on cross-functional/transversal dependencies, significant improvements made by suppliers, and the successful application of the single-use technologies Written for biopharmaceutical manufacturers, process developers, and biological and chemical engineers, Single-Use Technology in Biopharmaceutical Manufacture, 2nd Edition provides the information needed for professionals to come to an easier decision for or against disposable alternatives and to choose the appropriate system.
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 974 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Combinatorial Methods for Chemical and Biological Sensors written by Radislav A. Potyrailo and published by Springer Science & Business Media. This book was released on 2009-03-21 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical sensors are in high demand for applications as varied as water pollution detection, medical diagnostics, and battlefield air analysis. Designing the next generation of sensors requires an interdisciplinary approach. The book provides a critical analysis of new opportunities in sensor materials research that have been opened up with the use of combinatorial and high-throughput technologies, with emphasis on experimental techniques. For a view of component selection with a more computational perspective, readers may refer to the complementary volume of Integrated Analytical Systems edited by M. Ryan et al., entitled “Computational Methods for Sensor Material Selection”.
Download or read book Protein Bioseparation Using Ultrafiltration Theory Applications And New Developments written by Raja Ghosh and published by World Scientific. This book was released on 2003-06-11 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultrafiltration is a pressure-driven, membrane-based separation process, which is used for a broad variety of applications, ranging from the processing of biological macromolecules to wastewater treatment. It has significant advantages over competing separation technologies. Food and biotechnological applications account for nearly 40% of the current total usage of ultrafiltration membranes. Protein bioseparation is an important component of this application segment. Ultrafiltration is used for protein concentration, desalting, clarification and fractionation (i.e. protein-protein separation). Concentration, desalting and clarification are technologically less demanding and have been in used in the bioprocess industry for some time. Protein fractionation, on the other hand, is a challenging proposition and is definitely a more recent development. This book focuses primarily on protein fractionation./a
Download or read book Handbook of Surface Plasmon Resonance written by Richard B. M. Schasfoort and published by Royal Society of Chemistry. This book was released on 2017-05-30 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface plasmon resonance (SPR) plays a dominant role in real-time interaction sensing of biomolecular binding events, this book provides a total system description including optics, fluidics and sensor surfaces for a wide researcher audience.
