Download or read book Integrated Hydrological CFD Modelling Approach for Simulating Bacteria in Stormwater Ponds written by Farzam Allafchi and published by . This book was released on 2021 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Reusing stormwater is a sustainable approach that a lot of cities around the world, including cities in Canada, are developing to improve local and regional water resources. For this purpose, water is typically withdrawn from stormwater ponds (large urban infrastructure that retain stormwater) and used for applications that require less than pristine water quality. However, the large size of these ponds along with the heterogeneity in water quality internally, make the withdrawal location from these ponds for reusable stormwater critically important. Also due to the large sizes of these ponds, collecting data throughout the pond to determine the optimal location for withdrawal is not practical. Modelling however, can provide a more practical means of studying contaminant distribution within the pond over time in order to identify the withdrawal location, among other valuable information. In this dissertation, a modelling approach was developed that simulates fate and transport of bacteria in stormwater ponds after rainstorm events. The model was run to simulate bacteria in the Inverness stormwater pond, which is a large T-shaped pond located in southeast of the City of Calgary, Alberta, Canada. The model has two components: a hydrological component and a Computational Fluid Dynamics (CFD) component. The hydrological component calculates the stormwater runoff of the subbasins of the catchment draining into the pond. The results were compared with collected data and good agreement was observed. Then, the results were fed to the CFD component as input in order to simulate the distribution of contamination brought in by the local hydrology. The CFD component simulates the hydrodynamics of the pond 3-dimensionally. The model was run based on collected data from the pond and multiple versions of the model were developed with regard to free-surface and particulate-attached bacteria transport. In order to address a common issue with hydro-environmental models - being difficult to validate - the model was validated in two ways. First, an instrument was designed and built to measure fluid flow velocity magnitude and direction in the pond. Once calibrated, it was deployed to the pond and the flow field was measured at multiple locations for validation purposes. Second, a non-dimensional number was introduced allowing a comparison between the bacteria concentration data from collected data and that of modelling result in multiple locations of the pond. In both of the validations, good agreement with collected data was observed. A volume of Fluid model and sediment transport model were integrated into the model, which allowed consideration of free-surface effects and for modeling wider range of bacteria, respectively. The model was used to identify the optimal location for water withdrawal for reuse. The middle of the pond, where the three wings join and near the surface, was located as the optimal location due to the lowest bacteria concentration. In an attempt to improve the water quality in the optimal location, strategic tree planting on the north bank of the West wing was studied. It was shown that the trees can reduce the transport of bacteria from the most contaminated location to the withdrawal location. The model was also used to study the impact of some of the important assumptions and environmental factors, such as rain and wind, on bacteria distribution. Wind was found to play a crucial role in the bacteria distribution in the pond.
Download or read book Urban Stormwater Modeling and Simulation written by Stephan J. Nix and published by CRC Press. This book was released on 1994-07-13 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Urban Stormwater Modeling and Simulation discusses several popular stormwater models and explains a variety of uses in practical terms. This unique book is divided into five key sections and begins with a description of urban runoff problems and how computer models play an important role in problem solving. The book continues with detailed discussions on the construction of watershed models, model verification and validation, the use of models for predicting stormwater runoff and pollution discharges, and common problems associated with popular modeling programs. A practical approach is used throughout the book, focusing on actual applications to illustrate basic principles. This is the first book available that provides both new and experienced engineers, consultants, and scientists with an organized approach to stormwater modeling and simulation, model construction, model verification, and software selection. Water quality professionals, environmental engineering students, technical libraries, regulators, and planners will also find this a perfect hands-on learning tool.
Download or read book Integrating Multiple Sources of Information for Improving Hydrological Modelling an Ensemble Approach written by Isnaeni Murdi Hartanto and published by CRC Press. This book was released on 2019-04-24 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: The availability of Earth observation and numerical weather prediction data for hydrological modelling and water management has increased significantly, creating a situation that today, for the same variable, estimates may be available from two or more sources of information. Yet, in hydrological modelling, usually, a particular set of catchment characteristics and input data is selected, possibly ignoring other relevant data sources. In this thesis, therefore, a framework is being proposed to enable effective use of multiple data sources in hydrological modelling. In this framework, each available data source is used to derive catchment parameter values or input time series. Each unique combination of catchment and input data sources thus leads to a different hydrological simulation result: a new ensemble member. Together, the members form an ensemble of hydrological simulations. By following this approach, all available data sources are used effectively and their information is preserved. The framework also accommodates for applying multiple data-model integration methods, e.g. data assimilation. Each alternative integration method leads to yet another unique simulation result. Case study results for a distributed hydrological model of Rijnland, the Netherlands, show that the framework can be applied effectively, improve discharge simulation, and partially account for parameter and data uncertainty.
Download or read book Global Solutions for Urban Drainage written by Eric W. Strecker and published by . This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Water Management at Abandoned Flooded Underground Mines written by Christian Wolkersdorfer and published by Springer Science & Business Media. This book was released on 2008-02-01 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the processes related to mine abandonment from a hydrogeological perspective and provides a comprehensive presentation of water management and innovative tracer techniques for flooded mines. After an introduction to the relevant hydrogeochemical processes the book gives detailed information about mine closure procedures. The book also includes case studies and hints, and some new methodologies for conducting tracer tests in flooded mines.
Download or read book Smart Water Utilities written by Pernille Ingildsen and published by IWA Publishing. This book was released on 2016-05-15 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today there is increasing pressure on the water infrastructure and although unsustainable water extraction and wastewater handling can continue for a while, at some point water needs to be managed in a way that is sustainable in the long-term. We need to handle water utilities “smarter”. New and effective tools and technologies are becoming available at an affordable cost and these technologies are steadily changing water infrastructure options. The quality and robustness of sensors are increasing rapidly and their reliability makes the automatic handling of critical processes viable. Online and real-time control means safer and more effective operation. The combination of better sensors and new water treatment technologies is a strong enabler for decentralised and diversified water treatment. Plants can be run with a minimum of personnel attendance. In the future, thousands of sensors in the water utility cycle will handle all the complexity in an effective way. Smart Water Utilities: Complexity Made Simple provides a framework for Smart Water Utilities based on an M-A-D (Measurement-Analysis-Decision). This enables the organisation and implementation of “Smart” in a water utility by providing an overview of supporting technologies and methods. The book presents an introduction to methods and tools, providing a perspective of what can and could be achieved. It provides a toolbox for all water challenges and is essential reading for the Water Utility Manager, Engineer and Director and for Consultants, Designers and Researchers.
Download or read book Proceedings of AICCE 19 written by Fadzli Mohamed Nazri and published by Springer Nature. This book was released on 2019-11-28 with total page 1635 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the latest research, innovations, and applications in the field of civil engineering, as presented by leading national and international academics, researchers, engineers, and postgraduate students at the AWAM International Conference on Civil Engineering 2019 (AICCE’19), held in Penang, Malaysia on August 21-22, 2019. The book covers highly diverse topics in the main fields of civil engineering, including structural and earthquake engineering, environmental engineering, geotechnical engineering, highway and transportation engineering, water resources engineering, and geomatic and construction management. In line with the conference theme, “Transforming the Nation for a Sustainable Tomorrow”, which relates to the United Nations’ 17 Global Goals for Sustainable Development, it highlights important elements in the planning and development stages to establish design standards beneficial to the environment and its surroundings. The contributions introduce numerous exciting ideas that spur novel research directions and foster multidisciplinary collaborations between various specialists in the field of civil engineering.
Download or read book Water Quality Engineering in Natural Systems written by David A. Chin and published by John Wiley & Sons. This book was released on 2006-05-19 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: FOCUSING ON CONTAMINANT FATE AND TRANSPORT, DESIGN OF ENVIRONMENTAL-CONTROL SYSTEMS, AND REGULATORY CONSTRAINTS This textbook details the fundamental equations that describe the fate and transport of contaminantsin the water environment. The application of these fundamental equations to the design of environmental-control systems and methodologies for assessing the impact of contaminant discharges into rivers, lakes, wetlands, ground water, and oceans are all covered. Readers learn to assess how much waste can be safely assimilatedinto a water body by developing a solid understanding of the relationship between the type of pollutant discharged, the characteristics of the receiving water, and physical, chemical, and biological impacts. In cases of surface runoff from urban and agricultural watersheds, quantitative relationships between the quality of surface runoff and the characteristics of contaminant sources located within the watersheds are presented. Some of the text's distinguishing features include its emphasis on the engineering design of systems that control the fate and transport of contaminants in the water environment, the design of remediation systems, and regulatory constraints. Particular attention is given to use-attainability analyses and the estimation of total maximum daily loads, both of which are essential components of water-quality control in natural systems. Readers are provided with a thorough explanation of the complex set of laws and regulations governing water-quality control in the United States. Proven as an effective textbook in several offerings of the author's class "Water Quality Control in Natural Systems," the flow of the text is carefully structured to facilitate learning. Moreover, a number of practical pedagogical tools are offered: * Practical examples used throughout the text illustrate the effects of controlling the quality, quantity, timing, and distribution of contaminant discharges into the environment * End-of-chapter problems, and an accompanying solutions manual, help readers assess their grasp of each topic as they progress through the text * Several appendices with useful reference material are provided, including current U.S. Water Quality Standards * Detailed bibliography guides readers to additional resources to explore particular topics in greater depth With its emphasis on contaminant fate and transport and design of environmental-control systems, this text is ideal for upper-level undergraduates and graduate students in environmental and civil engineering programs.Environmental scientists and practicing environmental/civil engineers will also find the text relevant and useful.
Download or read book Urban Hydroinformatics written by Roland K. Price and published by IWA Publishing. This book was released on 2011 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an introduction to hydroinformatics applied to urban water management. It shows how to make the best use of information and communication technologies for manipulating information to manage water in the urban environment. The book covers the acquisition and analysis of data from urban water systems to instantiate mathematical models or calculations, which describe identified physical processes. The models are operated within prescribed management procedures to inform decision makers, who are responsible to recognized stakeholders. The application is to the major components of the urban water environment, namely water supply, treatment and distribution, wastewater and stormwater collection, treatment and impact on receiving waters, and groundwater and urban flooding. Urban Hydroinformatics pays particular attention to modeling, decision support through procedures, economics and management, and implementation in both developed and developing countries. The book is written with post-graduates, researchers and practicing engineers who are involved in urban water management and want to improve the scope and reliability of their systems.
Download or read book HEC 6 written by and published by . This book was released on 1995 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Water Wise Cities and Sustainable Water Systems written by Xiaochang C. Wang and published by IWA Publishing. This book was released on 2020-12-15 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building water-wise cities is a pressing need nowadays in both developed and developing countries. This is mainly due to the limitation of the available water resources and aging infrastructure to meet the needs of adapting to social and environmental changes and for urban liveability. This is the first book to provide comprehensive insights into theoretical, systematic, and engineering aspects of water-wise cities with a broad coverage of global issues. The book aims to (1) provide a theoretical framework of water-wise cities and associated sustainable water systems including key concepts and principles, (2) provide a brand-new thinking on the design and management of sustainable urban water systems of various scales towards a paradigm shift under the resource and environmental constraints, and (3) provide a technological perspective with successful case studies of technology selection, integration, and optimization on the “fit-for-purpose” basis.
Download or read book Urban Drainage written by David Butler and published by CRC Press. This book was released on 2010-09-13 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Urban Drainage has been thoroughly revised and updated to reflect changes in the practice and priorities of urban drainage. New and expanded coverage includes: Sewer flooding The impact of climate change Flooding models The move towards sustainability Providing a descriptive overview of the issues involved as well as the engineering principles and analysis, it draws on real-world examples as well as models to support and demonstrate the key issues facing engineers dealing with drainage issues. It also deals with both the design of new drainage systems and the analysis and upgrading of existing infrastructure. This is a unique and essential textbook for students of water, environmental, and public health engineering as well as a valuable resource for practising engineers.
Download or read book Urbanization under a Changing Climate written by Jianxun He and published by MDPI. This book was released on 2021-06-18 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: In response to the increasing urbanization, advances in the science of urban hydrology have improved urban water system management, creating more livable cities in which public safety and health, as well as the environment, are protected. The ultimate goal of urban water management is to mimic the hydrological cycle prior to urbanization. On top of urbanization, climate change, which has been demonstrated to alter the hydrological cycle in all respects, has introduced additional challenges to managing urban water systems. To mitigate and adapt to urbanization under a changing climate, understanding key hydrologic components should expand to include complex issues brought forth by climate change. Thus, effective and efficient measures can be formulated. This Special Issue of Water presents a variety of research papers that span a range of spatial and temporal scales of relevance in different societies’ efforts in adapting to the eminent changes in climate and the continuous changes in the landscape. From mitigating water quality in permeable pavements and bioretention swales to understanding changes in groundwater recharge in large regions, this Special Issue examines the state-of-the-art in sustainable urban design for adaptation and resiliency.
Download or read book Innovative Biosystems Engineering for Sustainable Agriculture Forestry and Food Production written by Antonio Coppola and published by Springer Nature. This book was released on 2020-03-19 with total page 860 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the latest advances, innovations, and applications in the field of innovative biosystems engineering for sustainable agriculture, forestry and food production. Focusing on the challenges of implementing sustainability in various contexts in the fields of biosystems engineering, it shows how the research has addressed the sustainable use of renewable and non-renewable resources. It also presents possible solutions to help achieve sustainable production. The Mid-Term Conference of the Italian Association of Agricultural Engineering (AIIA) is part of a series of conferences, seminars and meetings that the AIIA organizes, together with other public and private stakeholders, to promote the creation and dissemination of new knowledge in the sector. The contributions included in the book were selected by means of a rigorous peer-review process, and offer an extensive and multidisciplinary overview of interesting solutions in the field of innovative biosystems engineering for sustainable agriculture.
Download or read book Australian Runoff Quality written by T. H. F. Wong and published by . This book was released on 2006-01-01 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: looks at the best ways for urban design using water sensitive designs. With chapters including constructed wetlands and ponds, infiltration systems and hydrocarbon management, it covers the topic very well.
Download or read book Intakes and Outfalls for Seawater Reverse Osmosis Desalination Facilities written by Thomas M. Missimer and published by Springer. This book was released on 2015-04-07 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book assembles the latest research on new design techniques in water supplies using desalinated seawater. The authors examine the diverse issues related to the intakes and outfalls of these facilities. They clarify how and why these key components of the facilities impact the cost of operation and subsequently the cost of water supplied to the consumers. The book consists of contributed articles from a number of experts in the field who presented their findings at the "Desalination Intakes and Outfalls" workshop held at King Abdullah University of Science and Technology (KAUST) in Saudi Arabia in October, 2013. The book integrates coverage relevant to a wide variety of researchers and professionals in the general fields of environmental engineering and sustainable development.
Download or read book Environmental Conservation Clean Water Air Soil CleanWAS written by Muhammad Aqeel Ashraf and published by IWA Publishing. This book was released on 2017-02-15 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: As we embark into the 21st century, we need to address new challenges ranging from population growth, climate change, and depletion of natural resources to providing better health care, food security and peace to humankind, while at the same time protecting natural ecosystems that provide the services which allow life to flourish on Earth. To meet those challenges, profound changes are required in the way that societies conduct their everyday affairs, ways that will lead to better preservation, protection and sustainable management of natural resources with long lasting impacts. The aim of CleanWAS 2016 is to provide productive opportunities for academics and practitioners from interdisciplinary fields of Environmental Sciences to meet, share and bring expertise and ideas in related disciplines. The CleanWAS conference was first organized in the year 2012. It is an annual event organised by the International Water, Air and Soil Conservation society (INWASCON) and is supported by various Malaysian (UKM, UMS, UIAM) and Chinese universities (CUG, NKU, SYSU).
