Download or read book Integrated Electronics on Aluminum Nitride written by Reet Chaudhuri and published by Springer Nature. This book was released on 2022-12-06 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis outlines the principles, device physics, and technological applications of electronics based on the ultra-wide bandgap semiconductor aluminum nitride. It discusses the basic principles of electrostatics and transport properties of polarization-induced two-dimensional electron and hole channels in semiconductor heterostructures based on aluminum nitride. It explains the discovery of high-density two-dimensional hole gases in undoped heterojunctions, and shows how these high conductivity n- and p-type channels are used for high performance nFETs and pFETs, along with wide bandgap RF, mm-wave, and CMOS applications. The thesis goes on to discuss how the several material advantages of aluminum nitride, such as its high thermal conductivity and piezoelectric coefficient, enable not just high performance of transistors, but also monolithic integration of passive elements such as high frequency filters, enabling a new form factor for integrated RF electronics.
Download or read book 3D and Circuit Integration of MEMS written by Masayoshi Esashi and published by John Wiley & Sons. This book was released on 2021-07-19 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D and Circuit Integration of MEMS Explore heterogeneous circuit integration and the packaging needed for practical applications of microsystems MEMS and system integration are important building blocks for the “More-Than-Moore” paradigm described in the International Technology Roadmap for Semiconductors. And, in 3D and Circuit Integration of MEMS, distinguished editor Dr. Masayoshi Esashi delivers a comprehensive and systematic exploration of the technologies for microsystem packaging and heterogeneous integration. The book focuses on the silicon MEMS that have been used extensively and the technologies surrounding system integration. You’ll learn about topics as varied as bulk micromachining, surface micromachining, CMOS-MEMS, wafer interconnection, wafer bonding, and sealing. Highly relevant for researchers involved in microsystem technologies, the book is also ideal for anyone working in the microsystems industry. It demonstrates the key technologies that will assist researchers and professionals deal with current and future application bottlenecks. Readers will also benefit from the inclusion of: A thorough introduction to enhanced bulk micromachining on MIS process, including pressure sensor fabrication and the extension of MIS process for various advanced MEMS devices An exploration of epitaxial poly Si surface micromachining, including process condition of epi-poly Si, and MEMS devices using epi-poly Si Practical discussions of Poly SiGe surface micromachining, including SiGe deposition and LP CVD polycrystalline SiGe A concise treatment of heterogeneously integrated aluminum nitride MEMS resonators and filters Perfect for materials scientists, electronics engineers, and electrical and mechanical engineers, 3D and Circuit Integration of MEMS will also earn a place in the libraries of semiconductor physicists seeking a one-stop reference for circuit integration and the practical application of microsystems.
Download or read book High Thermal Conductivity AIN Packages for High Temperature Electronics written by and published by . This book was released on 1995 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: A novel metallization for aluminum nitride substrates to package silicon carbide integrated circuits for use at temperatures of 600 deg C and above was investigated. Chemical equilibrium calculations were used to determine the chemical compatibility of several refractory and transition metal disilicides with AlN and SiC. Tungsten disilicide, niobium disilicide, and titanium disilicide were selected for diffusion couple and thin film deposition studies. AlN-WSi2-SiC, AlN-NbSi2-SiC, and AlN-TiSi2-SiC diffusion couples were formed at 1000 deg C and 1200 deg C. WSi2, NbSi2, and TiSi2 thin films were deposited by RF sputtering on AIN substrates and heat treated at 900 deg C, 1000 deg C, and l200 deg C in an argon atmosphere, while WSi2 thin film was deposited on a single crystal SiC wafer and heat treated at 900 deg C. Sheet resistivities were measured, and interfaces were characterized by scanning and transmission electron microscopy imaging, electron diffraction, and energy dispersive x ray microanalysis spectroscopy. The results show that metal silicides appear to be promising as metallization for aluminum nitride for use at 600 deg C and above.
Download or read book Micro Relay Technology for Energy Efficient Integrated Circuits written by Hei Kam and published by Springer. This book was released on 2014-10-16 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume describes the design of relay-based circuit systems from device fabrication to circuit micro-architectures. This book is ideal for both device engineers as well as circuit system designers, and highlights the importance of co-design across design hierarchies when trying to optimize system performance (in this case, energy-efficiency). The book will also appeal to researchers and engineers focused on semiconductor, integrated circuits, and energy efficient electronics.
Download or read book 3D and Circuit Integration of MEMS written by Masayoshi Esashi and published by John Wiley & Sons. This book was released on 2021-03-16 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore heterogeneous circuit integration and the packaging needed for practical applications of microsystems MEMS and system integration are important building blocks for the “More-Than-Moore” paradigm described in the International Technology Roadmap for Semiconductors. And, in 3D and Circuit Integration of MEMS, distinguished editor Dr. Masayoshi Esashi delivers a comprehensive and systematic exploration of the technologies for microsystem packaging and heterogeneous integration. The book focuses on the silicon MEMS that have been used extensively and the technologies surrounding system integration. You’ll learn about topics as varied as bulk micromachining, surface micromachining, CMOS-MEMS, wafer interconnection, wafer bonding, and sealing. Highly relevant for researchers involved in microsystem technologies, the book is also ideal for anyone working in the microsystems industry. It demonstrates the key technologies that will assist researchers and professionals deal with current and future application bottlenecks. Readers will also benefit from the inclusion of: A thorough introduction to enhanced bulk micromachining on MIS process, including pressure sensor fabrication and the extension of MIS process for various advanced MEMS devices An exploration of epitaxial poly Si surface micromachining, including process condition of epi-poly Si, and MEMS devices using epi-poly Si Practical discussions of Poly SiGe surface micromachining, including SiGe deposition and LP CVD polycrystalline SiGe A concise treatment of heterogeneously integrated aluminum nitride MEMS resonators and filters Perfect for materials scientists, electronics engineers, and electrical and mechanical engineers, 3D and Circuit Integration of MEMS will also earn a place in the libraries of semiconductor physicists seeking a one-stop reference for circuit integration and the practical application of microsystems.
Download or read book Official Gazette of the United States Patent and Trademark Office written by United States. Patent and Trademark Office and published by . This book was released on 2001 with total page 1496 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book MEMS Aluminum Nitride Technology for Inertial Sensors written by Gabriele Vigevani and published by . This book was released on 2011 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design and fabrication of MEMS Inertial Sensors (both accelerometers and gyroscopes) made of Aluminum Nitride (AlN) is described in this dissertation. The goal of this work is to design and fabricate inertial sensors based on c-axis oriented AlN polycrystalline thin films. AlN is a post-CMOS compatible piezoelectric material widely used for acoustic resonators, such Bulk Acoustic Wave (BAW) and Lamb Wave Resonators (LWR). In this work we develop the design techniques necessary to obtain inertial sensors with AlN thin film technology. Being able to use AlN as structural material for both acoustic wave resonator and sensing elements is key to achieve the three level integration of RF-MEMS components, sensing elements and CMOS in the same chip. Using AlN as integration platform is particularly suitable for large consumer emerging markets where production costs are the major factor that determine a product success. In order to achieve a platform integration, the first part of this work focuses on the fabrication process: starting from the fabrication technology used for LWR devices, this work shows that by slightly modifying some of the fabrication steps it is possible to obtain MEMS accelerometers and gyroscopes with the same structural layers used for LWR. In the second part of this work, an extensive analysis, performed with analytical and Finite Element Models (FEM), is developed for beam and ring based structures. These models are of great importance as they provide tools to understand the physics of lateral piezoelectric beam actuation and the major limitations of this technology. Based on the models developed for beam based resonators, we propose two designs for Double Ended Tuning Fork (DETF) based accelerometers. In the last part of the dissertation, we show the experimental results and the measurements performed on actual devices. As this work shows analytically and experimentally, there are some fundamental constraints that limit the ultimate sensitivity of piezoelectric sensors based on resonating beam structures. Although the limitations of the structures here considered cannot achieve tactical grade sensitivities, this research proves that it is possible to achieve performances close to those required by large consumer electronics. This work proves that AlN based platforms can be a great opportunity for future developments in IMU and in general for MEMS integrated solutions.
Download or read book High Frequency GaN Electronic Devices written by Patrick Fay and published by Springer. This book was released on 2020-08-25 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together recent research by scientists and device engineers working on both aggressively-scaled conventional transistors as well as unconventional high-frequency device concepts in the III-N material system. Device concepts for mm-wave to THz operation based on deeply-scaled HEMTs, as well as distributed device designs based on plasma-wave propagation in polarization-induced 2DEG channels, tunneling, and hot-carrier injection are discussed in detail. In addition, advances in the underlying materials science that enable these demonstrations, and advancements in metrology that permit the accurate characterization and evaluation of these emerging device concepts are also included. Targeting readers looking to push the envelope in GaN-based electronics device research, this book provides a current, comprehensive treatment of device concepts and physical phenomenology suitable for applying GaN and related materials to emerging ultra-high-frequency applications. Offers readers an integrated treatment of the state of the art in both conventional (i.e., HEMT) scaling as well as unconventional device architectures suitable for amplification and signal generation in the mm-wave and THz regime using GaN-based devices, written by authors that are active and widely-known experts in the field; Discusses both conventional scaled HEMTs (into the deep mm-wave) as well as unconventional approaches to address the mm-wave and THz regimes; Provides “vertically integrated” coverage, including materials science that enables these recent advances, as well as device physics & design, and metrology techniques; Includes fundamental physics, as well as numerical simulations and experimental realizations.
Download or read book Optoelectronic Devices written by M Razeghi and published by Elsevier. This book was released on 2004 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tremendous progress has been made in the last few years in the growth, doping and processing technologies of the wide bandgap semiconductors. As a result, this class of materials now holds significant promis for semiconductor electronics in a broad range of applications. The principal driver for the current revival of interest in III-V Nitrides is their potential use in high power, high temperature, high frequency and optical devices resistant to radiation damage. This book provides a wide number of optoelectronic applications of III-V nitrides and covers the entire process from growth to devices and applications making it essential reading for those working in the semiconductors or microelectronics. Broad review of optoelectronic applications of III-V nitrides
Download or read book In Situ Composites in the Aluminum Nitride alumina System written by Ender Savrun and published by . This book was released on 1995 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Active Array Antennas for High Resolution Microwave Imaging Radar written by Jiaguo Lu and published by Springer Nature. This book was released on 2023-05-04 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the application of active array antennas in high-resolution microwave imaging radar systems. It introduces the basic principles, analytical methods, and performance parameters of active array antennas to achieve low profile, high efficiency, and lightweight. The book systematically elaborates the architecture, analysis, and engineering practice to achieve wideband, multi-band, multi-polarization, and common aperture in active array antennas. It explores hotspot technologies of digital array antennas, microwave photonic array antennas, and active packaging antennas. By presenting over 300 illustrations and diagrams, including schematic diagrams, block diagrams, relation diagrams, and breakdown drawings, the book enables a thorough understanding of the antenna array microsystem as the advanced phase of active array antennas and the direction of future R&D. The book is a good reference source for researchers and engineers interested in the engineering and implementation of microwave imaging radar systems and antenna technology.
Download or read book Thermodynamic Properties of Aluminum Nitride written by Alla D. Mah and published by . This book was released on 1961 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Integrated Circuit Industry written by Yangyuan Wang and published by Springer Nature. This book was released on 2023-12-29 with total page 2006 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by hundreds experts who have made contributions to both enterprise and academics research, these excellent reference books provide all necessary knowledge of the whole industrial chain of integrated circuits, and cover topics related to the technology evolution trends, fabrication, applications, new materials, equipment, economy, investment, and industrial developments of integrated circuits. Especially, the coverage is broad in scope and deep enough for all kind of readers being interested in integrated circuit industry. Remarkable data collection, update marketing evaluation, enough working knowledge of integrated circuit fabrication, clear and accessible category of integrated circuit products, and good equipment insight explanation, etc. can make general readers build up a clear overview about the whole integrated circuit industry. This encyclopedia is designed as a reference book for scientists and engineers actively involved in integrated circuit research and development field. In addition, this book provides enough guide lines and knowledges to benefit enterprisers being interested in integrated circuit industry.
Download or read book Process dependence of Properties in High Thermal Conductivity Aluminum Nitride Substrates for Electronic Packaging written by John H. Cooper and published by . This book was released on 1991 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Products and Services Catalog written by Defense Technical Information Center (U.S.) and published by . This book was released on 1996 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Review Aluminum Nitride MEMS Contour mode Resonator Project Supported by National Natural Science Foundation Nos 61274001 61234007 61504130 the Nurturing and Development Special Projects of Beijing Science and Technology Innovation Base s Financial Support No Z131103002813070 and the National Defense Science and Technology Innovation Fund of CAS No CXJJ 14 M32 written by and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: Over the past several decades, the technology of micro-electromechanical system (MEMS) has advanced. A clear need of miniaturization and integration of electronics components has had new solutions for the next generation of wireless communications. The aluminum nitride (AlN) MEMS contour-mode resonator (CMR) has emerged and become promising and competitive due to the advantages of the small size, high quality factor and frequency, low resistance, compatibility with integrated circuit (IC) technology, and the ability of integrating multi-frequency devices on a single chip. In this article, a comprehensive review of AlN MEMS CMR technology will be presented, including its basic working principle, main structures, fabrication processes, and methods of performance optimization. Among these, the deposition and etching process of the AlN film will be specially emphasized and recent advances in various performance optimization methods of the CMR will be given through specific examples which are mainly focused on temperature compensation and reducing anchor losses. This review will conclude with an assessment of the challenges and future trends of the CMR.
Download or read book Proceedings for the Second Workshop on Smart Power Power Integrated Circuits Technology and Applications written by and published by . This book was released on 1994 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt:
