Download or read book Integrated 60GHz RF Beamforming in CMOS written by Yikun Yu and published by Springer Science & Business Media. This book was released on 2011-01-06 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrated 60GHz RF Beamforming in CMOS describes new concepts and design techniques that can be used for 60GHz phased array systems. First, general trends and challenges in low-cost high data-rate 60GHz wireless system are studied, and the phased array technique is introduced to improve the system performance. Second, the system requirements of phase shifters are analyzed, and different phased array architectures are compared. Third, the design and implementation of 60GHz passive and active phase shifters in a CMOS technology are presented. Fourth, the integration of 60GHz phase shifters with other key building blocks such as low noise amplifiers and power amplifiers are described in detail. Finally, this book describes the integration of a 60GHz CMOS amplifier and an antenna in a printed circuit-board (PCB) package.

Download or read book CMOS 60 GHz and E band Power Amplifiers and Transmitters written by Dixian Zhao and published by Springer. This book was released on 2015-06-29 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the development of design techniques and methodologies for 60-GHz and E-band power amplifiers and transmitters at device, circuit and layout levels. The authors show the recent development of millimeter-wave design techniques, especially of power amplifiers and transmitters, and presents novel design concepts, such as “power transistor layout” and “4-way parallel-series power combiner”, that can enhance the output power and efficiency of power amplifiers in a compact silicon area. Five state-of-the-art 60-GHz and E-band designs with measured results are demonstrated to prove the effectiveness of the design concepts and hands-on methodologies presented. This book serves as a valuable reference for circuit designers to develop millimeter-wave building blocks for future 5G applications.

Download or read book Design Techniques for Manufacturable 60GHz CMOS LNAs written by Amneh M. Akour and published by . This book was released on 2011 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: Emerging broadband applications are pushing for the need to build high data rate wireless transceivers at 60GHz for high volume low cost mobile devices. Central to the success of implementing such transceivers is the robust design of 60GHz CMOS RF front ends, especially the low noise amplifiers (LNAs). In the future, CMOS technology is expected to enable low-cost mm-wave applications such as high data-rate communication links, passive and active imaging and sensor systems, and instrumentation and measurements equipment. Building highly integrated inexpensive mm-wave CMOS devices requires high quality factor lumped and distributed passives with accurate and scalable transistor and passives models. My research work focuses on demonstrating a methodology for generating a scalable compact model for on-chip transmission lines and interconnects on lossy silicon substrate. The model is demonstrated over 20-60 GHz frequency band using two types of transmission lines built in TSMC's 0.18 um CMOS technology. Several CPWs and Microstrip lines are designed with different lengths to verify the accuracy and scalability of the extracted model. The compact model shows an excellent agreement with measured data with maximum deviation in S11 magnitude and phase of 9.2% and 5.6%, respectively, and maximum deviation in S21 magnitude and phase of 10.1% and 6.6%, respectively. Compared to existing model extraction methodologies, the required time for generating the compact model and simulating transmission lines is reduced significantly. The generated models are fully compatible with all commercial circuit simulators. This work presents key design techniques for different CMOS mm-wave LNA topologies. The proposed LNA topologies are, the three-stage cascode RF NMOS configuration and four-stage Common Gate followed by Common Source configuration. Simulation results for 60GHz LNAs show that the first topology can achieve a peak gain of 16.67 dB with a 3-dB bandwidth of 7 GHz, and a noise figure less than 11.04 dB over the entire bandwidth. The achieved peak gain from the second topology is 9.7 dB with a 3-dB bandwidth of 7 GHz and a noise figure less than 13.06 dB over the entire bandwidth. Simulation results for Sub-THz LNAs show that the first topology can achieve a peak gain of 23.5 dB at 92.1 GHz with a 3-dB bandwidth of 25 GHz, and a noise figure less than 5.5 dB over the entire bandwidth. The achieved peak gain from the second topology is 23.2 dB at 105 GHz with a 3-dB bandwidth of 15 GHz and a noise figure less than 6.1 dB over the entire bandwidth. The LNAs are designed and tested in 90nm RF CMOS. Moreover in today's radio design environment, the front-end analog devices in the transceiver require several silicon spins before they meet the specifications and they have relatively low yields. My work aims to propose a digital self-calibration technique for LNAs' to enhance the yield to at least 90%. The proposed technique is shown to maintain typical specified performance at worst case corners in the presence of random process, supply and temperature variations, and hence allowing for manufacturable 60GHz RF CMOS design for high volume applications without leading to over-design or increasing power consumption.

Download or read book Neuromorphic Photonics written by Paul R. Prucnal and published by CRC Press. This book was released on 2017-05-08 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book sets out to build bridges between the domains of photonic device physics and neural networks, providing a comprehensive overview of the emerging field of "neuromorphic photonics." It includes a thorough discussion of evolution of neuromorphic photonics from the advent of fiber-optic neurons to today’s state-of-the-art integrated laser neurons, which are a current focus of international research. Neuromorphic Photonics explores candidate interconnection architectures and devices for integrated neuromorphic networks, along with key functionality such as learning. It is written at a level accessible to graduate students, while also intending to serve as a comprehensive reference for experts in the field.

Download or read book Smart Grids and Their Communication Systems written by Ersan Kabalci and published by Springer. This book was released on 2018-09-01 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents a broad overview of emerging smart grid technologies and communication systems, offering a helpful guide for future research in the field of electrical engineering and communication engineering. It explores recent advances in several computing technologies and their performance evaluation, and addresses a wide range of topics, such as the essentials of smart grids for fifth generation (5G) communication systems. It also elaborates the role of emerging communication systems such as 5G, internet of things (IoT), IEEE 802.15.4 and cognitive radio networks in smart grids. The book includes detailed surveys and case studies on current trends in smart grid systems and communications for smart metering and monitoring, smart grid energy storage systems, modulations and waveforms for 5G networks. As such, it will be of interest to practitioners and researchers in the field of smart grid and communication infrastructures alike.

Download or read book mm Wave Silicon Technology written by Ali M. Niknejad and published by Springer Science & Business Media. This book was released on 2008-01-03 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book compiles and presents the research results from the past five years in mm-wave Silicon circuits. This area has received a great deal of interest from the research community including several university and research groups. The book covers device modeling, circuit building blocks, phased array systems, and antennas and packaging. It focuses on the techniques that uniquely take advantage of the scale and integration offered by silicon based technologies.

Download or read book Rolling Out 5G written by Biljana Badic and published by Apress. This book was released on 2016-06-02 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examine the challenges of 4G in the light of impending and crucial future communication needs, and review the lessons learned from an implementation and system operation perspective with an eye towards the next generation – 5G. You'll investigate key changes and additions to 5G in terms of use cases. You'll also learn about the applications for and explorations of the technology. Among all of the technological disruptions, two stand out in particular – mmWave and spectrum sharing technologies. Rolling Out 5G features detailed coverage of these two critical topics, and for the first time among 5G learning resources presents a holistic perspective on key ingredients for mobile communication in a 5G world. The authors represent highly experienced experts with valuable know-how in the field of wireless communications related research projects defining future technological trends. This unique group of talents will be able to consider the 5G technology evolution from all angles mentioned: long-term research, standardization and regulation, product design and marketization. This approach allows this much-needed book to capture the views of all key decision making stake-holders involved in the 5G definition process, and to serve readers in their roles connected with wireless communication's next generation of products and services. What You'll Learn See how 5G is expected to overcome 4G insufficiencies and challenges Examine expected 5G features, including usage of millimeter wave communication and licensed shared access Review key milestones of the next generation wireless communication technology including key standardization and regulation bodies Study new technologies and upcoming changes in feature sets and client expectations. Who This Book Is For Engineers of mobile device and infrastructure manufacturing industries, development engineers of semiconductor manufacturing industries, and engineers with a general interest in the field. Mobile network operators, along with students and business professionals in the telecommunications domain will also find the topic of interest.

Download or read book Evolution of Air Interface Towards 5G written by Suvra Sekhar Das and published by CRC Press. This book was released on 2022-09-01 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past few decades, wireless access networks have evolved extensively to support the tremendous growth of consumer traffic. This superlative growth of data consumption has come about due to several reasons, such as evolution of the consumer devices, the types of telephone and smartphone being used, convergence of services, digitisation of economic transactions, tele-education, telemedicine, m-commerce, virtual reality office, social media, e-governance, e-security, to name but a few.Not only has the society transformed to a digital world, but also the expectations from the services provided have increased many folds. The last mile/meters of delivery of all e-services is now required to be wireless. It has always been known that wireless links are the bottleneck to providing high data rates and high quality of service. Several wireless signalling and performance analysis techniques to overcome the hurdles of wireless channels have been developed over the last decade, and these are fuelling the evolution of 4G towards 5G. Evolution of Air Interface Towards 5G attempts to bring out some of the important developments that are contributing towards such growth.

Download or read book Low Power Millimeter Wave Transmitters for High Data Rate Applications written by Khaled Khalaf and published by Springer. This book was released on 2019-04-09 with total page 109 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses low power techniques for millimeter wave transmitter IC. Considerations for the front-end design are followed by several implementation examples in the 60GHz band in CMOS down to 28nm technology. Additionally, the design and implementation details of digitally-modulated millimeter wave polar transmitters are presented.

Download or read book 5G Multimedia Communication written by Zoran S. Bojkovic and published by CRC Press. This book was released on 2020-10-27 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: In bringing to the readers the book 5G Multimedia Communication: Technology, Multiservices and Deployment, the aim is to present current work and direction on the challenging subject of multimedia communications, with theoretical and practical roots. The past two decades have witnessed an extremely fast evolution of mobile cellular network technology. The fifth generation of mobile wireless systems has achieved the first milestone toward finalization and deployment by 2020. This is vital to the development of future multimedia communications. Also, it is necessary to consider 5G technology from the performance point of view by analyzing network capabilities to the operator and to the end user in terms of data rate, capacity, coverage, energy efficiency, connectivity and latency. The book is divided into three major parts with each part containing four to seven chapters: • Critical enabling technology • Multiservices network • Deployment scenarios The first part discusses enabling technologies, such as green communication, channel modeling, massive and distributed MIMO and ML-based networks. In the second part, different methodologies and standards for multiservices have been discussed. Exclusive chapters have been dedicated to each of the open research challenges such as multimedia operating in 5G environment, network slicing optimization, mobile edge computing, mobile video multicast/broadcast, integrated satellite and drone communication. The third part paved the way to deployment scenarios for different innovative services including integration of a multienergy system in smart cities, intelligent transportation systems, 5G connectivity in the transport sector, healthcare services, 5G edge-based video surveillance and challenges of connectivity for massive IoT in 5G and beyond systems. The book is written by experts in the field who introduced scientific and engineering concepts, covering the 5G multimedia communication areas. The book can be read cover-to-cover or selectively in the areas of interest for the readers. Generally, the book is intended for novel readers who could benefit from understanding general concepts, practitioners who seek guidance into the field and senior-level as well as graduate-level engineering students in understanding the process of today’s wireless multimedia communications.

Download or read book CMOS Analog IC Design for 5G and Beyond written by Sangeeta Singh and published by Springer Nature. This book was released on 2021-02-07 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is focused on addressing the designs of FinFET-based analog ICs for 5G and E-band communication networks. In addition, it also incorporates some of the contemporary developments over different fields. It highlights the latest advances, problems and challenges and presents the latest research results in the field of mm-wave integrated circuits designing based on scientific literature and its practical realization. The traditional approaches are excluded in this book. The authors cover various design guidelines to be taken care for while designing these circuits and detrimental scaling effects on the same. Moreover, Gallium Nitrides (GaN) are also reported to show huge potentials for the power amplifier designing required in 5G communication network. Subsequently, to enhance the readability of this book, the authors also include real-time problems in RFIC designing, case studies from experimental results, and clearly demarking design guidelines for the 5G communication ICs designing. This book incorporates the most recent FinFET architecture for the analog IC designing and the scaling effects along with the GaN technology as well.

Download or read book Time Multiplexed Beam Forming with Space Frequency Transformation written by Wei Deng and published by Springer Science & Business Media. This book was released on 2012-08-23 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a unique approach to smart receiver system design. It starts with the analysis of a very basic, single-path receiver structure, then using similar methods, extends the analysis to a more complicated multi-path receiver. Within the multi-path structure, two different types of phased –array architectures are discussed: Analog beam-forming, and digital beam-forming. The pros and cons are studied, and the gaps are identified. Whereas previous books in this area focus mainly on phased-array circuit implementations, this book fills a gap by providing a system-level approach and introduces new methods for developing smart systems.

Download or read book Millimeter wave Integrated Technologies in the Era of the Fourth Industrial Revolution written by Wynand Lambrechts and published by Springer Nature. This book was released on 2020-06-20 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: This peer-reviewed book explores the technologies driving broadband internet connectivity in the fourth industrial revolution (Industry 4.0). It particularly focuses on potential solutions to introduce these technologies in emerging markets and rural areas, regions that typically form part of the digital divide and often have under-developed telecommunications infrastructures, a lack of skilled workers, and geographical restrictions that limit broadband connectivity. Research shows that ubiquitous internet access boosts socio-economic growth through innovations in science and technology, with the common goal of bringing positive change to the lives of individuals. Fifth-generation (5G) networks based on millimeter-wave (mm-wave) frequency information transfer have the potential to provide future-proof, affordable and sustainable broadband connectivity in areas where previous-generation mobile networks were unable to do so. This book discusses the principles of various technologies that enable electronic circuits to operate at mm-wave frequencies. It examines the importance of identifying, describing, and analyzing technology from a purely technological standpoint, but also acknowledges and investigates the challenges and limitations of introducing such technologies in emerging markets. Presenting recent research, the book spearheads participation in Industry 4.0 in these areas.

Download or read book Reconfigurable Circuits and Technologies for Smart Millimeter Wave Systems written by Philippe Ferrari and published by Cambridge University Press. This book was released on 2022-05-26 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the theory, modeling, and design of tunable mm-wave circuits and systems using CMOS, RF MEMS, and microwave liquid crystals.

Download or read book Cmos Millimeter wave Integrated Circuits For Next Generation Wireless Communication Systems written by Yeo Kiat Seng and published by World Scientific. This book was released on 2019-07-09 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses in-depth technical issues, limitations, considerations and challenges facing millimeter-wave (MMW) integrated circuit and system designers in designing MMW wireless communication systems from the complementary metal-oxide semiconductor (CMOS) perspective. It offers both a comprehensive explanation of fundamental theories and a broad coverage of MMW integrated circuits and systems.CMOS Millimeter-Wave Integrated Circuits for Next Generation Wireless Communication Systems is an excellent reference for faculty, researchers and students working in electrical and electronic engineering, wireless communication, integrated circuit design and circuits and systems. While primarily written for upper-level undergraduate courses, it is also an excellent introduction to the subject for instructors, graduate students, researchers, integrated circuit designers and practicing engineers. Advanced readers could also benefit from this book as it includes many recent state-of-the-art MMW circuits.

Download or read book Design and Modeling of 60 GHz CMOS Integrated Circuits written by Chinh Huy Doan and published by . This book was released on 2009 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applications in Electronics Pervading Industry Environment and Society written by Alessandro De Gloria and published by Springer. This book was released on 2015-08-07 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough overview of cutting-edge research on electronics applications relevant to industry, the environment, and society at large. A wide spectrum of application domains are covered, from automotive to space and from health to security and special attention is devoted to the use of embedded devices and sensors for imaging, communication and control. The book is based on the 2014 APPLEPIES Conference, held in Rome, which brought together researchers and stakeholders to consider the most significant current trends in the field of applied electronics and to debate visions for the future. Areas covered by the conference included information communication technology; biotechnology and biomedical imaging; space; secure, clean and efficient energy; the environment; and smart, green and integrated transport. As electronics technology continues to develop apace, constantly meeting previously unthinkable targets, further attention needs to be directed toward the electronics applications and the development of systems that facilitate human activities. This book, written by industrial and academic professionals, will hopefully contribute in this endeavor.