Download or read book Science and Technology of Building Seals Sealants Glazing and Waterproofing written by Charles J. Parise and published by ASTM International. This book was released on 1992 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Glass Structures written by Jan Wurm and published by Springer Science & Business Media. This book was released on 2007 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flat glass opens up more possibilities for the planner than virtually any other material. Because of the technological complexity of using it, however, no specific structural forms have been developed for glass supporting frameworks as they have been for wood, concrete, and steel. This book is thus the first to present a coherent guide to the planning and design of glass supporting frameworks. The focus is on the pressure-resistant, flat supporting element as a basic building block for broad supporting structures. The spatial and constructive forms of multifunctional, self-supporting glass envelopes are vividly illustrated and systematically explained. The constructions presented exhibit new aesthetic qualities, based not on the dictum of "dematerialization" but on the poetry of gleaming and transparent planes. They ring in a new chapter in the history of glass architecture.

Download or read book Science and Technology of Building Seals Sealants Glazing and Waterproofing written by Jerome M. Klosowski and published by ASTM International. This book was released on 1992 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of an ASTM sponsored symposium held in Fort Lauderdale, Florida in February 1992. Topics of papers include extended lab testing for two structural glazing silicone sealants, usefulness of accelerated test methods for sealant weathering, climate driven durability tester, new tests for adh

Download or read book Science and Technology of Glazing Systems written by Charles J. Parise and published by ASTM International. This book was released on 1989 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Architectural Graphic Standards for Residential Construction written by American Institute of Architects and published by John Wiley & Sons. This book was released on 2010-04-26 with total page 721 pages. Available in PDF, EPUB and Kindle. Book excerpt: The residential construction market may have its ups and downs, but the need to keep your construction knowledge current never lets up. Now, with the latest edition of Architectural Graphic Standards for Residential Construction, you can keep your practice at the ready. This edition was expertly redesigned to include all-new material on current technology specific to residential projects for anyone designing, constructing, or modifying a residence. With additional, new content covering sustainable and green designs, sample residential drawings, residential construction code requirements, and contemporary issues in residential construction, it’s a must-have resource. And now it's easier to get the information you need when you need it with references to the relevant building codes built right into the details and illustrations. These new "smart" details go beyond dimensions with references to the International Residential Building Code—presenting all the information you need right at your fingertips. New features and highlights include: Loads of previously unpublished content—over 80% is either new or entirely revised Sustainable/ green design information in every chapter—a must today's practicing building and construction professionals Coverage of contemporary issues in residential construction—aging in place, new urbanism, vacation and small homes, historic residences…it’s all here. Coverage of single- and multi-family dwellings—complete coverage of houses, row homes and quadraplexes as dictated by the International Residential Building Codes.

Download or read book International Scientific Conference Energy Management of Municipal Transportation Facilities and Transport EMMFT 2017 written by Vera Murgul and published by Springer. This book was released on 2017-12-20 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes the proceedings of the 19th International Scientific Conference “Energy Management of Municipal Transportation Facilities and Transport EMMFT 2017”, which was held in Khabarovsk, Russia on 10–13 April 2017. The book presents the research findings of scientists working at universities in the Far Eastern, Siberian and Ural Federal Districts of Russia, and of Serbia, which are unique regions notable for sustainably operating complex transport infrastructures in severe climatic and geographic environments. It also offers practical insights into transportation operation under such conditions.The book discusses the experiences of colleagues from Slovenia, Ukraine and Latvia in the development of transport infrastructure and construction of transport facilities and features and includes the results of a wide range of studies, such as managing multimodal transportation, improving the efficiency of locomotives, electric locomotives, traction substations, electrical substations, relay protection and automation devices, and power-factor correction units. It addresses topics like renewable energy sources, problems of the mathematical and simulation modelling of electromagnetic processes of electrical power objects and systems, aspects of cost reduction for fuel-and-power resources, theoretical aspects of energy management, development of transport infrastructure, modern organizational and technological solutions in construction, new approaches in the field of management, analysis and monitoring in transport sector.Comprising 142 high-quality articles covering a wide range of topics, these proceedings are of interest to anyone engaged in transport engineering, electric power systems, energy management, construction and operation of transport infrastructure buildings and facilities.

Download or read book Architectural Graphic Standards written by The American Institute of Architects and published by John Wiley & Sons. This book was released on 2007-03-30 with total page 1120 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since 1932, the ten editions of Architectural Graphic Standards have been referred to as the "architect's bible." From site excavation to structures to roofs, this book is the first place to look when an architect is confronted with a question about building design. With more than 8,000 architectural illustrations, including both reference drawings and constructible architectural details, this book provides an easily accessible graphic reference for highly visual professionals. To celebrate seventy-five years as the cornerstone of an industry, this commemorative Eleventh Edition is the most thorough and significant revision of Architectural Graphic Standards in a generation. Substantially revised to be even more relevant to today's design professionals, it features: An entirely new, innovative look and design created by Bruce Mau Design that includes a modern page layout, bold second color, and new typeface Better organized-- a completely new organization structure applies the UniFormat(r) classification system which organizes content by function rather than product or material Expanded and updated coverage of inclusive, universal, and accessible design strategies Environmentally-sensitive and sustainable design is presented and woven throughout including green materials, LEEDS standards, and recyclability A bold, contemporary new package--as impressive closed as it is open, the Eleventh Edition features a beveled metal plate set in a sleek, black cloth cover Ribbon Markers included as a convenient and helpful way to mark favorite and well used spots in the book All New material Thoroughly reviewed and edited by hundreds of building science experts and experienced architects, all new details and content including: new structural technologies, building systems, and materials emphasis on sustainable construction, green materials, LEED standards, and recyclability expanded and updated coverage on inclusive, universal, and accessible design strategies computing technologies including Building Information Modeling (BIM) and CAD/CAM new information on regional and international variations accessibility requirements keyed throughout the text new standards for conducting, disseminating, and applying architectural research New and improved details With some 8,500 architectural illustrations, including both reference drawings and constructible architectural details, Architectural Graphic Standards continues to be the industry's leading, easily accessible graphic reference for highly visual professionals.

Download or read book Material Criteria and Installation Practices for the Retrofit Application of Insulation and Other Weatherization Materials written by United States. Department of Energy. Division of Buildings and Community Systems and published by . This book was released on 1978 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Moisture control in buildings written by Heinz R. Trechsel and published by ASTM International. This book was released on 1994 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Challenging Glass 3 written by IOS Press and published by IOS Press. This book was released on 2012-06-21 with total page 1022 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are two things everybody knows about glass: it is transparent, and it breaks! These are also the properties that constitute the challenge of glass as an architectural and structural material. This book presents papers from the third Challenging Glass Conference (CGC3), held at the Technical University (TU) Delft, the Netherlands, in June 2012. The conference brings together glass engineering, research and design specialists. Papers are grouped under seven topic headings: project and case studies; joints, fixings and adhesives; strength, stability and safety (a category which includes a quarter of all the papers presented at the conference); laminates and composite design; curved and bended glass; architectural design and lighting and finally, glass in facades. Glass remains one of the most exciting materials available to designers and architects today. This book will be of interest to all those involved in working with glass in an architectural and structural context.

Download or read book Architects Data written by Ernst Neufert and published by John Wiley & Sons. This book was released on 2012-03-26 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: Neufert's Architects' Data is an essential reference for the initial design and planning of a building project. It provides, in one concise volume, the core information needed to form the framework for the more detailed design and planning of any building project. Organised largely by building type, it covers the full range of preliminary considerations, and with over 6200 diagrams it provides a mass of data on spatial requirements. Most illustrations are dimensioned and each building type includes plans, sections, site layouts and design details. An extensive bibliography and a detailed set of metric/ imperial conversion tables are included. Since it was first published in Germany in 1936, Ernst Neufert's handbook has been progressively revised and updated through 39 editions and many translations. This fourth English language edition is translated from the 39th German edition, and represents a major new edition for an international, English speaking readership. Reviews of the Previous Edition: "Neufert's Architects' Data was the first book I bought when I started my studies in architecture. It was invaluable for me then and it is still a useful aid in my designs." —Cesar Pelli "With this thorough rewrite Neufert has produced yet again an invaluable reference book." —The Architects' Journal

Download or read book National Crime Prevention Institute Manual written by University of Louisville. National Crime Prevention Institute and published by . This book was released on 1977 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book History of Construction Cultures Volume 1 written by João Mascarenhas-Mateus and published by CRC Press. This book was released on 2021-08-01 with total page 1535 pages. Available in PDF, EPUB and Kindle. Book excerpt: History of Construction Cultures Volume 1 contains papers presented at the 7ICCH – Seventh International Congress on Construction History, held at the Lisbon School of Architecture, Portugal, from 12 to 16 July, 2021. The conference has been organized by the Lisbon School of Architecture (FAUL), NOVA School of Social Sciences and Humanities, the Portuguese Society for Construction History Studies and the University of the Azores. The contributions cover the wide interdisciplinary spectrum of Construction History and consist on the most recent advances in theory and practical case studies analysis, following themes such as: - epistemological issues; - building actors; - building materials; - building machines, tools and equipment; - construction processes; - building services and techniques ; -structural theory and analysis ; - political, social and economic aspects; - knowledge transfer and cultural translation of construction cultures. Furthermore, papers presented at thematic sessions aim at covering important problematics, historical periods and different regions of the globe, opening new directions for Construction History research. We are what we build and how we build; thus, the study of Construction History is now more than ever at the centre of current debates as to the shape of a sustainable future for humankind. Therefore, History of Construction Cultures is a critical and indispensable work to expand our understanding of the ways in which everyday building activities have been perceived and experienced in different cultures, from ancient times to our century and all over the world.

Download or read book Materials Technology written by Yvonne Dean and published by Routledge. This book was released on 2016-07-01 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Technology clearly identifies materials and technology as the fundamental generators of buildings and examines how they determine the structure, overall form and quality. It examines the issues that determine the choice of materials, and argues that the decision-making of architects, engineers and designers should take account of the environmental impact of sourcing the basic materials, and of the energy implications of their processing and use in manufacturing. Materials Technology is an essential resource for Materials Technology units in building, architecture and surveying degree and postgraduate courses; and students of BTEC HNC/D building and surveying. It will also be a useful reference tool for Advanced GNVQ Construction and the Built Environment courses and Built Environment NVQs at levels 3 and 4.

Download or read book The Use of Glass in Buildings written by Valerie L. Block and published by ASTM International. This book was released on 2002 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume from the American Society for Testing and Materials contains 16 papers by industry professionals on the use of glass in buildings with an emphasis on glass design. Editor Block discusses codes and standards affecting glass in buildings in the U.S. and abroad. Other topics inc

Download or read book COST Action TU0905 Mid term Conference on Structural Glass written by Jan Belis and published by CRC Press. This book was released on 2013-04-05 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of glass as a structural material may seem surprising initially, yet pioneering glass structures were first built two decades ago already. Ever since, Structural Glass has been developing at a very high pace thanks to very intensive scientific and industrial research and new technological developments.Right at the heart of these rap

Download or read book Sustainable Facades written by Ajla Aksamija and published by John Wiley & Sons. This book was released on 2013-03-27 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical information on designing sustainable, energy-efficient building facades As energy and other natural resources are being depleted, it has become clear that technologies and strategies that allow us to maintain our satisfaction with interior environments while consuming less of these resources are major objectives of contemporary facade design. Sustainable Facades focuses on the strategies and approaches for designing sustainable, high-performance building facades, and provides technical guidance for architects and designers. This timely and useful guide presents strategies and technical guidelines for designing environmentally sensitive, energy-efficient facades based on scientific principles. It provides climate-specific approaches for minimizing energy consumption, analyzes the thermal behavior of different facade systems and materials, and illustrates with case studies how these approaches have been implemented on architectural projects. It also discusses emerging facade technologies, materials, and systems. Topics covered in this unique and indispensable guide include: Climate-based design approaches for high-performance facades Characteristics of sustainable facades: energy efficiency, thermal behavior, and moisture resistance Designing for thermal comfort, lighting and glare control, and acoustic quality Emerging technologies in facade design, including smart materials, double-skin facades, and facades as energy generators Case studies on building orientation and facade design, tectonic sun exposure control, external shading elements, and more