Download or read book Instrumentation and Measurement in Electrical Engineering written by Roman Malaric and published by Universal-Publishers. This book was released on 2011 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: The inclusion of an electrical measurement course in the undergraduate curriculum of electrical engineering is important in forming the technical and scientific knowledge of future electrical engineers. This book explains the basic measurement techniques, instruments, and methods used in everyday practice. It covers in detail both analogue and digital instruments, measurements errors and uncertainty, instrument transformers, bridges, amplifiers, oscilloscopes, data acquisition, sensors, instrument controls and measurement systems. The reader will learn how to apply the most appropriate measurement method and instrument for a particular application, and how to assemble the measurement system from physical quantity to the digital data in a computer. The book is primarily intended to cover all necessary topics of instrumentation and measurement for students of electrical engineering, but can also serve as a reference for engineers and practitioners to expand or refresh their knowledge in this field.
Download or read book Instruments Measurement Electronics and Information Engineering written by J.Z. Ma and published by Trans Tech Publications Ltd. This book was released on 2013-08-08 with total page 3960 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the 2013 International Conference on Precision Mechanical Instruments and Measurement Technology (ICPMIMT 2013), May 25-26, 2013, Shenyang, Liaoning, China. The 804 papers are grouped as follows: Chapter 1: Mechatronics, Control and Management, Measurement and Instrumentation, Monitoring Technologies; Chapter 2: Materials Science and Manufacturing Engineering; Chapter 3: Power Systems, Electronics and Microelectronics, Embedded and Integrated Systems, Communication; Chapter 4: Computational Methods and Algorithms, Applied Information Technologies.
Download or read book Advanced Instrument Engineering Measurement Calibration and Design written by Lay-Ekuakille, Aimé and published by IGI Global. This book was released on 2013-06-30 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Measurement technologies and instrumentation have a multidisciplinary impact in the field of applied sciences. These engineering technologies are necessary in processing information required for renewable energy, biotechnology, power quality, and nanotechnology. Advanced Instrument Engineering: Measurement, Calibration, and Design presents theoretical and practical aspects on the activities concerning measurement technologies and instrumentation. This wide range of new ideas in the field of measurements and instrumentation is useful to researchers, scientists, practitioners, and technicians for their area of expertise.
Download or read book Basic Instrumentation for Engineers and Physicists written by A. M. P. Brookes and published by Elsevier. This book was released on 2017-05-17 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: Basic Instrumentation for Engineers and Physicists provides information pertinent to the fundamental aspects of instrumentation and measurements. This book discusses the method of building up an instrumentation system. Organized into eight chapters, this book begins with an overview of the instruments designed for use by human operatives that are usually of the visual reading type. This text then examines the common methods of length measurement by means of scales and by means of gauge blocks. Other chapters consider kilogram as the internationally recognized fundamental unit of mass, which is defined by a standard mass known as the International Prototype Kilogram. This book discusses as well the importance of precise determination of time. The final chapter deals with the assembly of apparatus appropriate for the measurements that have to be made in carrying out a specific project. This book is a valuable resource for engineers, physicists, scientists, students, and research workers.
Download or read book Electronic Instrumentation and Measurement written by Khurana Rohit and published by Vikas Publishing House. This book was released on 2015 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book Electronic Instrumentation and Measurement has been written for the students of BE/BTech in Electronics and Communication Engineering, Electrical and Electronics Engineering, and Electronic Instrumentation Engineering. It explains the performance, operation and applications of the most important electronic measuring instruments, techniques and instrumentation methods that include both analog and digital instruments. The book covers a wide range of topics that deal with the basic measurement theory, measurement techniques, such as analog meter movements, digital instruments, power and energy measurement meters, AC and DC bridges, magnetic measurements, cathode ray oscilloscope, display devices and recorders, and transducers. It also explains generation and analysis of signals along with DC and AC potentiometers, and transformers. Key Features • Complete coverage of the subject as per the syllabi of most universities • Relevant illustrations provide graphical representation for in-depth knowledge • A large number of mathematical examples for maximum clarity of concepts • Chapter objectives at the beginning of each chapter for its overview • Chapter-end summary and exercises for quick review and to test your knowledge • A comprehensive index in alphabetical form for quick access to finer topics
Download or read book INSTRUMENTATION FOR ENGINEERING MEASUREMENTS 2ND ED written by James W. Dally and published by . This book was released on 2010-09-01 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Market_Desc: Departments: Mechanical, Aerospace, Civil and Petroleum Engineering, Engineering Mechanics, Courses: Engineering Measurements & Lab, Engineering Instrumentation, Cluster with: Figliola/Measurements. Special Features: Emphasis on electronic measurements, basics of electronic circuits. · New problems throughout text. Material on the basics of electronic circuits presents the basic fundamental principles of electronics for better comprehension of the operation of instrument systems. · Detailed model of piezoelectric sensor behavior and built-in voltage follower circuit description helps the engineering student understand the implications of how the sensor is connected to the outside world for signal recording purposes. · Analysis of Vibrating Systems introduces the pitfalls that can cause misinterpretation of data. About The Book: This edition was written to address the changes that have occurred in the engineering measurements field since 1984 and to better integrate a course in measurements with other educational objectives in the engineering curricula. The text provides detailed coverage of the many aspects of digital instrumentation currently being employed in industry for engineering measurements and process control. Heavy emphasis is placed on electronics measurements. Every chapter has been updated; three new chapters have been added.
Download or read book Wiley Survey of Instrumentation and Measurement written by Stephen A. Dyer and published by John Wiley & Sons. This book was released on 2004-04-07 with total page 1096 pages. Available in PDF, EPUB and Kindle. Book excerpt: In-depth coverage of instrumentation and measurement from the Wiley Encyclopedia of Electrical and Electronics Engineering The Wiley Survey of Instrumentation and Measurement features 97 articles selected from the Wiley Encyclopedia of Electrical and Electronics Engineering, the one truly indispensable reference for electrical engineers. Together, these articles provide authoritative coverage of the important topic of instrumentation and measurement. This collection also, for the first time, makes this information available to those who do not have access to the full 24-volume encyclopedia. The entire encyclopedia is available online-visit www.interscience.wiley.com/EEEE for more details. Articles are grouped under sections devoted to the major topics in instrumentation and measurement, including: * Sensors and transducers * Signal conditioning * General-purpose instrumentation and measurement * Electrical variables * Electromagnetic variables * Mechanical variables * Time, frequency, and phase * Noise and distortion * Power and energy * Instrumentation for chemistry and physics * Interferometers and spectrometers * Microscopy * Data acquisition and recording * Testing methods The articles collected here provide broad coverage of this important subject and make the Wiley Survey of Instrumentation and Measurement a vital resource for researchers and practitioners alike
Download or read book Electronic Measurements and Instrumentation For UPTU Lucknow written by Navani J.P. & Sapra Sonal and published by S. Chand Publishing. This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is written in a simple and easy-to-understand language to explain the fundamental concepts of the subject. The book presents the subject of EMI in a comprehensive manner to the students at undergraduate level.This book not only covers the entire scope of the subject but also explains the philosophy of the subject. This makes the understanding of the subject more clear and interesting. The book will be very useful not only to the students but also to the faculty members.Any suggestions for the improvement of the book will be acknowledged and well appreciated.
Download or read book Basic Electronic Instrument Handbook written by Clyde F. Coombs and published by McGraw-Hill Companies. This book was released on 1972 with total page 874 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to instrumentation. Fundamentals of electronic-measurement instruments. Fundamentals of signal-generation instruments. Using electronic instruments. Instrumentation systems. Current- and voltage-measurement devices. Circuit-element measuring instruments. Signal-generation instruments. Frequency- and time-measurement instruments. Recording instruments. Special-function instruments. Microwave passive devices.
Download or read book Measuring Electronics and Sensors written by Herbert Bernstein and published by Springer Nature. This book was released on 2021-11-27 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book gives an insight into today's operational measurement technology including analysis technology, without claiming to be complete. For the student, the book is an introduction in addition to the relevant textbooks and manuals. It gives the engineer in the profession a quick overview of measurement methods and instruments not familiar to him. In this book not only the components of measurement technology are presented transparently, but also the analog components that are necessary for the construction of measurement and control systems. The theoretical basics and the measuring methods are as much a part of the book as the description of systems, devices and measuring equipment. By indicating measuring ranges and error limits, additional reference points for the application are given, whereby the values mentioned are to be regarded as minimum values due to the constant technical development. This book is a translation of the original German 1st edition Messelektronik und Sensoren by Herbert Bernstein, published by Springer Fachmedien Wiesbaden GmbH, part of Springer Nature in 2014. The translation was done with the help of artificial intelligence (machine translation by the service DeepL.com). A subsequent human revision was done primarily in terms of content, so that the book will read stylistically differently from a conventional translation. Springer Nature works continuously to further the development of tools for the production of books and on the related technologies to support the authors.
Download or read book Measurement and Instrumentation in Engineering written by Francis S. Tse and published by CRC Press. This book was released on 2018-04-27 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting a mathematical basis for obtaining valid data, and basic concepts inmeasurement and instrumentation, this authoritative text is ideal for a one-semesterconcurrent or independent lecture/laboratory course.Strengthening students' grasp of the fundamentals with the most thorough, in-depthtreatment available, Measurement and Instrumentation in Engineeringdiscusses in detail basic methods of measurement, interaction between a transducer andits environment, arrangement of components in a system, and system dynamics ...describes current engineering practice and applications in terms of principles andphysical laws .. . enables students to identify and document the sources of noise andloading . .. furnishes basic laboratory experiments in sufficient detail to minimizeinstructional time ... and features more than 850 display equations, over 625 figures,and end-of-chapter problems.This impressive text, written by masters in the field, is the outstanding choice forupper-level undergraduate and beginning graduate-level courses in engineeringmeasurement and instrumentation in universities and four-year technical institutes formost departments.
Download or read book Electronic Measurement and Instrumentation written by Klaas B. Klaassen and published by Cambridge University Press. This book was released on 1996-09-05 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: A mainstream undergraduate text on electronic measurement for electrical and electronic engineers.
Download or read book Electronic Measurements and Instrumentation written by RK Rajput and published by S. Chand Publishing. This book was released on 2009 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this edition, the book has been completely updated by adding new topics in various chapters. Besides this, two new chapters namely : "Microprocessors and Microcontrollers" (Chapter-13) and "Universities Questions (Latest) with Solutions" (Chapter-14) have been added to make the book still more useful to the readers.
Download or read book Instrumentation for Engineering Measurements written by James W. Dally and published by . This book was released on 1984-01-20 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work aims to provide comprehensive coverage of the various types of instrumentation currently used for engineering measurements and process control in agricultural, aerospace, chemical, civil, mechanical and nuclear engineering. Emphasis is on electronic methods of measurement.
Download or read book Electrical Measurements written by Uday A. Bakshi and published by Technical Publications. This book was released on 2020-11-01 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of measuring instruments is well known in the various engineering fields. The book provides comprehensive coverage of various electrical and digital measuring instruments. The book starts with explaining the classification and requirements of a measuring instrument. Then the book explains the PMMC and moving iron instruments. Extension of range of instruments using shunts and multipliers is also included in the book. The book includes detailed discussion of instrument transformers and power factor meters. The book covers the types of wattmeters, errors and compensations and two wattmeter method. The chapter on energy measurement includes discussion of energy meters, errors and compensations, calibration, phantom loading, trivector meter and Merz price maximum demand indicator. The book teaches the details of d.c. and a.c. potentiometers along with their applications. The book further explains various d.c. and a.c. bridges along with necessary derivations and phasor diagrams. It also includes the discussion of various magnetic measurements. Finally, the book includes the discussion of various digital meters such as digital voltmeters, digital multimeter, digital frequency meter and digital tachometer along with the automation in digital instruments. Each chapter gives the conceptual knowledge about the topic dividing it in various sections and subsections. Each chapter provides the detailed explanation of the topic, practical examples and variety of solved problems. The book explains the philosophy of the subject which makes the understanding of the concepts very clear and makes the subject more interesting.
Download or read book Electronic Measurements written by Farzin Asadi and published by Springer Nature. This book was released on 2022-05-31 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Measurement is the process of obtaining the magnitude of a quantity relative to an agreed standard. Electronic measurement, which is the subject of this book, is the measurement of electronic quantities like voltage, current, resistance, inductance, and capacitance, to name a few. This book provides practical information concerning the techniques in electronic measurements and knowledge on how to use the electronic measuring instruments appropriately. The book is composed of five chapters. Chapter 1 focuses on digital multimeters. You will learn how to use it for measurement of AC/DC voltages/currents, resistance, connection test, and diode forward voltage drop test. Chapter 2 focuses on power supplies. Although power supplies are not a measurement device, they have an undeniable role in many measurements. So, being able to use power supplies correctly is quite important. Chapter 3 focuses on function generators. Like the power supplies, the function generators are not a measurement device in the first look. However, they play a very important role in many electronic measurements. So, being able to use a function generator correctly is an important skill any technician or engineer needs. Chapter 4 focuses on oscilloscopes. These days, digital oscilloscopes are the most commonly used tool in both industry and university. Because of this, this chapter focuses on digital oscilloscopes not on the analog ones which are almost obsolete. Chapter 5 focuses on drawing graph of data you obtained from your measurement. Visualization of data is very important in practical works. This chapter show how you can use MATLAB® for drawing the graph of your measurements. This book could be used a laboratory supplement for students of electrical/mechanical/mechatronics engineering, for technicians in the field of electrical/electronics engineering, and for anyone who is interested to make electronic circuits.
Download or read book Basic Electrical and Instrumentation Engineering written by P. Sivaraman and published by John Wiley & Sons. This book was released on 2021-01-13 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrical and instrumentation engineering is changing rapidly, and it is important for the veteran engineer in the field not only to have a valuable and reliable reference work which he or she can consult for basic concepts, but also to be up to date on any changes to basic equipment or processes that might have occurred in the field. Covering all of the basic concepts, from three-phase power supply and its various types of connection and conversion, to power equation and discussions of the protection of power system, to transformers, voltage regulation, and many other concepts, this volume is the one-stop, "go to" for all of the engineer's questions on basic electrical and instrumentation engineering. There are chapters covering the construction and working principle of the DC machine, all varieties of motors, fundamental concepts and operating principles of measuring, and instrumentation, both from a "high end" point of view and the point of view of developing countries, emphasizing low-cost methods. A valuable reference for engineers, scientists, chemists, and students, this volume is applicable to many different fields, across many different industries, at all levels. It is a must-have for any library.