Download or read book Instrumentation of the WAY 30 Test Pavements written by Shad M. Sargand and published by . This book was released on 2008 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: The US Route 30 bypass of Wooster, Ohio, in Wayne County, "WAY-30", was constructed to demonstrate two types of extended service pavements, a long-life Portland cement concrete (PCC) pavement on the eastbound lanes and an asphalt concrete (AC) perpetual pavement on the westbound lanes. Both pavements are designed to provide 50 years or more of service with minimal maintenance (e.g. resurfacing). The PCC pavement structure features a thick and extra-wide slab on an asphalt treated base, while the AC pavement structure features a Superpave surface and a Fatigue Resistant Layer (FRL). Two sections in each direction were instrumented with pressure cells to monitor subgrade pressures and deep and shallow LVDTs to record pavement deflections. The AC test section also had transverse and longitudinal strain gages. A weather station was also used to monitor environmental conditions. Nondestructive testing of the subgrade was conducted prior to pavement placement. Pavement materials and samples were tested in the laboratory to determine material parameters. Controlled vehicle load and falling weight deflectometer tests were applied to the AC pavement shortly after the road opened to traffic in December 2005 and again under hot weather conditions in July 2006. Similar tests on the PCC pavement were conducted in December 2005 and August 2006. The response on both types of pavement met their respective design criteria. A verification analysis of the AC pavement response using the elastic layer system (ELS) simulation using material properties derived from laboratory and field sample data yielded unsatisfactory matches, suggesting that some refinement of the approach is needed

Download or read book The Roles of Accelerated Pavement Testing in Pavement Sustainability written by José P. Aguiar-Moya and published by Springer. This book was released on 2016-09-15 with total page 877 pages. Available in PDF, EPUB and Kindle. Book excerpt: This compendium gathers the latest advances in the area of Accelerated Pavement Testing (APT), a means of testing full-scale pavement construction in an accelerated manner for structural deterioration in a very short term. Compiling novel research results presented at the 5th International Conference on Accelerated Pavement Testing, San Jose, Costa Rica, the volume serves as a timely and highly relevant resource for materials scientists and engineers interested in determining the performance of a pavement structure during its service life (10+ years) in a few weeks or months.

Download or read book Summary of Evaluation Findings for 30 meter Handheld and Mobile Pavement Marking Retroreflectometers written by Highway Innovative Technology Evaluation Center (U.S.) and published by ASCE Publications. This book was released on 2001-01-01 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF Innovation Center. This report summarizes the results of detailed evaluations performed on four handheld and two mobile pavement marking retroreflectometers. The evaluations were designed to test the measurement bias, repeatability, and reproducibility of handheld and mobile retroreflectometers produced by several manufacturers.

Download or read book Evaluation of a Hot Mix Asphalt Perpetual Pavement written by and published by . This book was released on 2010 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Pavement Design through Full scale Accelerated Pavement Testing written by David Jones and published by CRC Press. This book was released on 2012-10-08 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pack: Book and CDInternationally, full-scale accelerated pavement testing, either on test roads or linear/circular test tracks, has proven to be a valuable tool that fills the gap between models and laboratory tests and long-term experiments on in-service pavements. Accelerated pavement testing is used to improve understanding of pavement behavior,

Download or read book Performance Assessment of Warm Mix Asphalt WMA Pavements written by and published by . This book was released on 2009 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: Warm Mix Asphalt (WMA) is a new technology that was introduced in Europe in 1995. WMA offers several advantages over conventional asphalt concrete mixtures, including: reduced energy consumption, reduced emissions, improved or more uniform binder coating of aggregate which should reduce mix surface aging, and extended construction season in temperate climates. Three WMA techniques, Aspha-min, Sasobit, and Evotherm, were used to reduce the viscosity of the asphalt binder at certain temperatures and to dry and fully coat the aggregates at a lower production temperature than conventional hot mix asphalt. The reduction in mixing and compaction temperatures of asphalt mixtures leads to a reduction in both fuel consumption and emissions. This research project had two major components, the outdoor field study on SR541 in Guernsey County and the indoor study in the Accelerated Pavement Load Facility (APLF). Each study included the application of four types of asphalt surface layer, including standard hot mix asphalt as a control and three warm mixes: Evotherm, Aspha-min, and Sasobit. The outdoor study began with testing of the preexisting pavement and subgrade, the results of which indicated that while the pavement and subgrade were not uniform, there were no significant problems or variations that would be expected to lead to differences in performance of the planned test sections. During construction, the outdoor study included collection of emissions samples at the plant and on the construction site as well as thermal readings from the site. Afterwards, the outdoor study included the periodic collection and laboratory analysis of core samples and visual inspections of the road. Roughness (IRI) measurements were made shortly after construction and after a year of service. The indoor study involved the construction of four lanes of perpetual pavement, each topped with one of the test mixes. The lanes were further divided into northern and southern halves, with the northern halves having a full 16 in (40 cm) perpetual pavement, and with the southern halves with thicknesses decreasing in one in (2.5 cm) increments by reducing the intermediate layer. The dense graded aggregate base was increased to compensate for the change in pavement thickness. The southern half of each lane was instrumented to measure temperature, subgrade pressure, deflection relative to top of subgrade and to a point 5 ft (1.5 m) down, and longitudinal and transverse strains at the base of the fatigue resistance layer (FRL). The APLF had the temperature set to 40°F (4.4°C), 70°F (21.1°C), and 104°F (40°C), in that order. At each temperature, rolling wheel loads of 6000 lb (26.7 kN), 9000 lb (40 kN), and 12,000 lb (53.4 kN) were applied at lateral shifts of 3 in (76 mm), 1 in (25 mm), -4 in ( -102 mm), and -9 in ( - 229 mm) and the response measured. Then each plane was subjected to 10,000 passes of the rolling wheel load of 9000 lb (40 kN) at about 5 mph (8 km/h). Profiles were measured after 100, 300, 1000, 3000, and 10,000 passes with a profilometer to assess consolidation of each surface. After the 10,000 passes of the rolling wheel load were completed, a second set of measurements was made under rolling wheel loads of 6000 lb (26.7 kN), 9000 lb (40 kN), and 12,000 lb (53.4 kN) at the same lateral shifts as before. Additionally, the response of the pavement instrumentation was recorded during drops of a Falling Weight Deflectometer (FWD).

Download or read book Nationally Coordinated Program of Highway Research Development and Technology written by and published by . This book was released on 1987 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Highway Safety Literature written by and published by . This book was released on 1973 with total page 962 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Highway Safety Literature Annual Cumulation 1969 Vehicle Safety Bibliography Issues 69 1 Through 69 50 January December 1969 written by and published by . This book was released on 1970 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Highway Safety Literature Annual Cumulation written by and published by . This book was released on 1969 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of a 5-volume set, each covering a broad subject, which cumulates annually all citations that appeared during the year in: Highway safety literature. In present volume, annotated entries arranged under emergency services, injuries, investigations and records, and locations. No index.

Download or read book Bituminous Mixtures and Pavements VIII written by A.F. Nikolaides and published by CRC Press. This book was released on 2024-06-21 with total page 999 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bituminous Mixtures and Pavements VIII contains 114 papers as presented at the 8th International Conference ‘Bituminous Mixtures and Pavements’ (8th ICONFBMP, 12-14 June 2024, Thessaloniki, Greece). The contributions reflect the research and practical experience of academics and practicing engineers from thirty-four (34) different countries, and cover a wide range of topics: Session I: Bitumen, Modified binders, Aggregates, and Subgrade Session II: Bituminous mixtures (Design, Construction, Testing, Performance) Session III: Pavements (Design, Construction, Maintenance, Sustainability, Energy and Environmental consideration) Session IV: Pavement management and Geosynthetics Session V: Pavement recycling Session VI: Pavement surface characteristics, Pavement performance monitoring, Safety Session VII: Biomaterials in pavement engineering Session VIII: Prediction models of pavement performance Bituminous Mixtures and Pavements VIII covers recent advances in highway materials technology and pavement engineering, and will be of interest to scientists and professionals involved or interested in these areas. The ICONFBMP-conferences have been organized every four years since 1992. This 8th conference was jointly organized by: Laboratory of Highway Engineering, Aristotle University of Thessaloniki, Greece; Built Environment Research Institute (BERI), University of Ulster, UK; University of Texas San Antonio (UTSA), USA; Laboratory for Advanced Construction Technology (LACT), Technological Institute of Iowa, USA; Technological University of Delft (TUDelft), The Netherlands, and University of Antwerp, (UA), Belgium.

Download or read book Electrical Measuring Instruments and Measurements written by S.C. Bhargava and published by CRC Press. This book was released on 2012-12-27 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, written for the benefit of engineering students and practicing engineers alike, is the culmination of the author's four decades of experience related to the subject of electrical measurements, comprising nearly 30 years of experimental research and more than 15 years of teaching at several engineering institutions. The unique feature of this book, apart from covering the syllabi of various universities, is the style of presentation of all important aspects and features of electrical measurements, with neatly and clearly drawn figures, diagrams and colour and b/w photos that illustrate details of instruments among other things, making the text easy to follow and comprehend. Enhancing the chapters are interspersed explanatory comments and, where necessary, footnotes to help better understanding of the chapter contents. Also, each chapter begins with a "recall" to link the subject matter with the related science or phenomenon and fundamental background. The first few chapters of the book comprise "Units, Dimensions and Standards"; "Electricity, Magnetism and Electromagnetism" and "Network Analysis". These topics form the basics of electrical measurements and provide a better understanding of the main topics discussed in later chapters. The last two chapters represent valuable assets of the book, and relate to (a) "Magnetic Measurements", describing many unique features not easily available elsewhere, a good study of which is essential for the design and development of most electric equipment – from motors to transformers and alternators, and (b) "Measurement of Non-electrical Quantities", dealing extensively with the measuring techniques of a number of variables that constitute an important requirement of engineering measurement practices. The book is supplemented by ten appendices covering various aspects dealing with the art and science of electrical measurement and of relevance to some of the topics in main chapters. Other useful features of the book include an elaborate chapter-by-chapter list of symbols, worked examples, exercises and quiz questions at the end of each chapter, and extensive authors' and subject index. This book will be of interest to all students taking courses in electrical measurements as a part of a B.Tech. in electrical engineering. Professionals in the field of electrical engineering will also find the book of use.

Download or read book Publication Index Highway Research Board written by National Research Council (U.S.). Highway Research Board and published by . This book was released on 1956 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Special Report Highway Research Board written by National Research Council (U.S.). Highway Research Board and published by . This book was released on 1962 with total page 1004 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Special Report written by National Research Council (U.S.). Highway Research Board and published by . This book was released on 1955 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Calibration and Validation of the Enhanced Integrated Climatic Model for Pavement Design written by C. E. Zapata and published by Transportation Research Board. This book was released on 2008 with total page 73 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This report summarizes the results of research to evaluate, calibrate, and validate the Enhanced Integrated Climatic Model (EICM) incorporated in the original Version 0.7 (July 2004 release) of the Mechanistic-Empirical Pavement Design Guide (MEPDG) software with measured materials data from the Long-Term Pavement Performance Seasonal Monitoring Program (LTPP SMP) pavement sections. The report further describes subsequent changes made to the EICM to improve its prediction of moisture equilibrium for granular bases. The report will be of particular interest to pavement design engineers in state highway agencies and industry ..."--Foreword.

Download or read book Public Roads written by and published by . This book was released on 1996 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: