Download or read book Digital Instrumentation and Control Systems in Nuclear Power Plants written by National Research Council and published by National Academies Press. This book was released on 1997-04-18 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: The nuclear industry and the U.S. Nuclear Regulatory Commission (USNRC) have been working for several years on the development of an adequate process to guide the replacement of aging analog monitoring and control instrumentation in nuclear power plants with modern digital instrumentation without introducing off-setting safety problems. This book identifies criteria for the USNRC's review and acceptance of digital applications in nuclear power plants. It focuses on eight areas: software quality assurance, common-mode software failure potential, systems aspects of digital instrumentation and control technology, human factors and human-machine interfaces, safety and reliability assessment methods, dedication of commercial off-the-shelf hardware and software, the case-by-case licensing process, and the adequacy of technical infrastructure.
Download or read book Nuclear Power Plant Instrumentation and Control Systems for Safety and Security written by Yastrebenetsky, Michael and published by IGI Global. This book was released on 2014-02-28 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accidents and natural disasters involving nuclear power plants such as Chernobyl, Three Mile Island, and the recent meltdown at Fukushima are rare, but their effects are devastating enough to warrant increased vigilance in addressing safety concerns. Nuclear Power Plant Instrumentation and Control Systems for Safety and Security evaluates the risks inherent to nuclear power and methods of preventing accidents through computer control systems and other such emerging technologies. Students and scholars as well as operators and designers will find useful insight into the latest security technologies with the potential to make the future of nuclear energy clean, safe, and reliable.
Download or read book Safety related Instrumentation and Control Systems for Nuclear Power Plants written by International Atomic Energy Agency and published by . This book was released on 1984 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide deals primarily with design requirements for instrumentation and control systems important to safety but not part of the protection system (Safety Series No. 50-SG-D3). It gives recommendations on instrumentation and control systems for the prevention or termination of plant transients to avoid, if possible, the actuation of safety systems.
Download or read book NRC Regulatory Guides written by U.S. Nuclear Regulatory Commission and published by . This book was released on 1973 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: A compilation of currently available electronic versions of NRC regulatory guides.
Download or read book Instrumentation and Control Systems Important to Safety in Nuclear Power Plants written by IAEA and published by . This book was released on 2008-06-30 with total page 77 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Guide recommends how the requirements established in Safety Standards Series No. NS-R-1, Safety of Nuclear Power Plants: Design, should be met for instrumentation and control (I&C) systems important to safety.
Download or read book Digital Instrumentation and Control Systems in Nuclear Power Plants written by Committee on Application of Digital Instrumentation and Control Systems to Nuclear Power Plant Operations and Safety and published by National Academies Press. This book was released on 1997-05-02 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: The nuclear industry and the U.S. Nuclear Regulatory Commission (USNRC) have been working for several years on the development of an adequate process to guide the replacement of aging analog monitoring and control instrumentation in nuclear power plants with modern digital instrumentation without introducing off-setting safety problems. This book identifies criteria for the USNRC's review and acceptance of digital applications in nuclear power plants. It focuses on eight areas: software quality assurance, common-mode software failure potential, systems aspects of digital instrumentation and control technology, human factors and human-machine interfaces, safety and reliability assessment methods, dedication of commercial off-the-shelf hardware and software, the case-by-case licensing process, and the adequacy of technical infrastructure.
Download or read book Dependability Assessment of Software for Safety Instrumentation and Control Systems at Nuclear Power Plants written by International Atomic Energy Agency and published by International Atomic Energy Agency. This book was released on 2018-09-30 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication defines a framework that represents the state of the art in assessment methodologies for safety and instrumentation and control software used at nuclear power plants. It describes an approach for developing and communicating assessments based on claims, argument and evidence. The assessment of software dependability, which encompasses properties such as safety, reliability, availability, maintainability and security, is an essential and challenging aspect of the safety justification. Guiding principles for a dependability assessment are established to provide the basis for defining an assessment strategy and implementing the assessment process. Sources of evidence for the assessment are provided and lessons learned from past digital instrumentation and control system implementation in areas such as software development, operational usage, regulatory review and platform certification are also described.
Download or read book Instrumentation and Control Systems Important to Safety in Nuclear Power Plants written by International Atomic Energy Agency and published by . This book was released on 2002 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recommends how the requirements established in Safety Standards Series No. NS-R-1, Safety of Nuclear Power Plants: Design, should be met for instrumentation and control systems important to safety.
Download or read book Maintenance of Process Instrumentation in Nuclear Power Plants written by H.M. Hashemian and published by Springer Science & Business Media. This book was released on 2006-11-09 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a training course for I and C maintenance engineers in power, process, chemical, and other industries. It summarizes all the scattered literature in this field. The book compiles 30 years of knowledge gained by the author and his staff in testing the I and C systems of nuclear power plants around the world. It focuses on process temperature and pressure sensors and the verification of these sensors’ calibration and response time.
Download or read book Instrumentation and Control Systems Important to Safety in Nuclear Power Plants written by International Atomic Energy Agency and published by . This book was released on 2002 with total page 91 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NUREG CR written by U.S. Nuclear Regulatory Commission and published by . This book was released on 1977 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Managing Modernization of Nuclear Power Plant Instrumentation and Control Systems written by International Atomic Energy Agency and published by . This book was released on 2004 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers all of the management activities related to modernization of I&C systems in nuclear power plants, including the evaluation of all I&C systems to determine which can be successfully maintained and which need to be modernized.
Download or read book Cyber Security and Safety of Nuclear Power Plant Instrumentation and Control Systems written by Yastrebenetsky, Michael A. and published by IGI Global. This book was released on 2020-05-22 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety and security are crucial to the operations of nuclear power plants, but cyber threats to these facilities are increasing significantly. Instrumentation and control systems, which play a vital role in the prevention of these incidents, have seen major design modifications with the implementation of digital technologies. Advanced computing systems are assisting in the protection and safety of nuclear power plants; however, significant research on these computational methods is deficient. Cyber Security and Safety of Nuclear Power Plant Instrumentation and Control Systems is a pivotal reference source that provides vital research on the digital developments of instrumentation and control systems for assuring the safety and security of nuclear power plants. While highlighting topics such as accident monitoring systems, classification measures, and UAV fleets, this publication explores individual cases of security breaches as well as future methods of practice. This book is ideally designed for engineers, industry specialists, researchers, policymakers, scientists, academicians, practitioners, and students involved in the development and operation of instrumentation and control systems for nuclear power plants, chemical and petrochemical industries, transport, and medical equipment.
Download or read book Nuclear Power Safety written by James H. Rust and published by Elsevier. This book was released on 2013-10-22 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: A concise and current treatment of the subject of nuclear power safety, this work addresses itself to such issues of public concern as: radioactivity in routine effluents and its effect on human health and the environment, serious reactor accidents and their consequences, transportation accidents involving radioactive waste, the disposal of radioactive waste, particularly high-level wastes, and the possible theft of special nuclear materials and their fabrication into a weapon by terrorists. The implementation of the defense-in-depth concept of nuclear power safety is also discussed. Of interest to all undergraduate and graduate students of nuclear engineering, this work assumes a basic understanding of scientific and engineering principles and some familiarity with nuclear power reactors
Download or read book Safety Related Instrumentation and Control Systems for Nuclear Power Plants written by International Atomic Energy Agency and published by . This book was released on 1985 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Instrumentation and Control Systems and Software Important to Safety for Research Reactors written by International Atomic Energy Agency and published by . This book was released on 2023-11 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Guide provides recommendations on the operating organization and on personnel for research reactors to meet the relevant requirements of IAEA Safety Standards Series No. SSR-3, Safety of Research Reactors. It covers the typical operating organization for research reactor facilities; the recruitment process and qualification in terms of education, training and experience; programmes for initial and continuing training; the authorization process for those individuals having an immediate bearing on safety; and the processes for their requalification and reauthorization. This Safety Guide is a revision of IAEA Safety Standards Series No. NS-G-4.5, which it supersedes.
Download or read book Instrumentation and Control Systems and Software Important to Safety for Research Reactors written by IAEA and published by International Atomic Energy Agency. This book was released on 2023-08-14 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication provides specific recommendations on research reactor instrumentation and control systems and software important to safety, including instrumentation and control system architecture and associated components, from sensors to actuators, operator interfaces and auxiliary equipment, to meet the relevant requirements of IAEA Safety Standards Series No. SSR-3, Safety of Research Reactors. The recommendations and guidance apply to both the design and configuration management of instrumentation and control systems for new research reactors and the modernization of the instrumentation and control systems at existing research reactor facilities. In addition, this Safety Guide provides recommendations and guidance on human factors engineering and human-machine interfaces, and for computer based systems and software for use in instrumentation and control systems important to safety. This Safety Guide is a revision of IAEA Safety Standards Series No. SSG-37, which it supersedes.
