Download or read book Inspection of Mooring Hardware written by U. S. Army Corps of Engineers and published by . This book was released on 2001-04-02 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1-1 SCOPE: This UFC, 4-105-08, is a guide for the inspection and evaluation of facility berthing capability, for all facilities providing berthing for U.S. Military Ships. It is a source of reference for the planning, inspection and reporting of mooring hardware conditions in a standardized format.1-2 PURPOSE: This handbook provides guidance for the planning, inspection, assessment, and reporting of mooring hardware conditions. It should be used as a tool for helping personnel tasked with maintaining the readiness of shore side facilities for use by the fleet and in support of military marine operations. The Mooring Hardware Report has the following objectives: * Establish adequacy of mooring facilities. * Enable facility users to develop efficient berthing plans. * Establish baseline data on existing mooring hardware and berthing capacity. * Provide facility users with information sufficient to determine level of effort to maintain or upgrade existing capacity.
Download or read book Recommended Practice for In service Inspection of Mooring Hardware for Floating Drilling Units written by American Petroleum Institute. Production Department and published by . This book was released on 1987 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book In service Inspection of Mooring Hardware for Floating Structures written by American Petroleum Institute. Exploration and Production Department and published by . This book was released on 2008 with total page 73 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book In service Inspection of Mooring Hardware for Floating Drilling Units written by American Petroleum Institute, API and published by . This book was released on 1996 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book In service Inspection of Mooring Hardware for Floating Drilling Units written by American Petroleum Institute. Exploration and Production Department and published by . This book was released on 1996 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mooring System Engineering for Offshore Structures written by Kai-Tung Ma and published by Gulf Professional Publishing. This book was released on 2019-06-04 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: The mooring system is a vital component of various floating facilities in the oil, gas, and renewables industries. However, there is a lack of comprehensive technical books dedicated to the subject. Mooring System Engineering for Offshore Structures is the first book delivering in-depth knowledge on all aspects of mooring systems, from design and analysis to installation, operation, maintenance and integrity management. The book gives beginners a solid look at the fundamentals involved during mooring designs with coverage on current standards and codes, mooring analysis and theories behind the analysis techniques. Advanced engineers can stay up-to-date through operation, integrity management, and practical examples provided. This book is recommended for students majoring in naval architecture, marine or ocean engineering, and allied disciplines in civil or mechanical engineering. Engineers and researchers in the offshore industry will benefit from the knowledge presented to understand the various types of mooring systems, their design, analysis, and operations. Understand the various types of mooring systems and the theories behind mooring analysis Gain practical experience and lessons learned from worldwide case studies Combine engineering fundamentals with practical applications to solve today’s offshore challenges
Download or read book Cyclic Fatigue Testing of Surface Mooring Hardware for the Arabian Sea Mixed Layer Dynamics Experiment written by Richard P. Trask and published by . This book was released on 1995 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guidelines for the Design Operation and Maintenance of Multi Buoy Moorings written by Oil Companies International Marine Forum and published by Amer Nautical Services. This book was released on 2010 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Waterfront Facilities Inspection and Assessment written by Waterfront Inspection Task Committee and published by . This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: MOP 130 provides engineers with guidelines and tools for inspecting and evaluating the condition of waterfront structures located in seawater and freshwater environments.
Download or read book ARDM 2 USS Alamogordo Mooring Inspection Report Cooper River U S Naval Ammunition Depot Charleston South Carolina written by Jack E. Baber and published by . This book was released on 1979 with total page 59 pages. Available in PDF, EPUB and Kindle. Book excerpt: An underwater inspection of the condition of the mooring chains of the ARDM-2, USS ALAMOGORDO, moored in the Cooper River at the U.S. Naval Ammunition Depot, Charleston, S.C., was requested of the Ocean Engineering and Construction Project Office (FPO-1) and the Underwater Construction Team One (UCT-1) by the Naval Facilities Engineering Command by COMNAVFAC msg 101944Z August 1978. FPO-1 was tasked to provide the inspection criteria and procedures, provide an on-site field engineer, interpret the data and prepare the inspection report. UCT-1 was tasked with performing the underwater inspection. The mooring inspection plan is provided as Appendix 1 and the mooring inspection was completed in November 1978. This report describes the inspection procedures, inspection equipment, inspection criteria and summarizes the obtained data. Recommendations concerning the derating of the ARDM-2 mooring chains which did not meet the prescribed criteria are presented. Precautions to be followed in future inspections and potential areas are discussed.
Download or read book Mooring and Anchoring Ships Principles and practice written by I. C. Clark and published by . This book was released on 2009 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Engineering Practice of Materials and Corrosion written by Jung-Chul (Thomas) Eun and published by Springer Nature. This book was released on 2020-09-04 with total page 885 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an in-depth guide to the practical aspects of materials and corrosion engineering in the energy and chemical industries. The book covers materials, corrosion, welding, heat treatment, coating, test and inspection, and mechanical design and integrity. A central focus is placed on industrial requirements, including codes, standards, regulations, and specifications that practicing material and corrosion engineers and technicians face in all roles and in all areas of responsibility. The comprehensive resource provides expert guidance on general corrosion mechanisms and recommends materials for the control and prevention of corrosion damage, and offers readers industry-tested best practices, rationales, and case studies.
Download or read book Petroleum and Marine Technology Information Guide written by J. Hutcheon and published by CRC Press. This book was released on 2003-09-02 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 1981 as the Offshore Information Guide this guide to information sources has been hailed internationally as an indispensable handbook for the oil, gas and marine industries.
Download or read book Underwater Inspection and Repair for Offshore Structures written by John V. Sharp and published by John Wiley & Sons. This book was released on 2021-04-06 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: UNDERWATER INSPECTION AND REPAIR FOR OFFSHORE STRUCTURES Benefit from a much-needed, up-to-date handbook on underwater inspection and repair processes and technologies Underwater Inspection and Repair for Offshore Structures fills a gap in the literature to provide an overview of the inspection and repair processes for both steel and concrete offshore structures. Authors and noted experts on the topic John V. Sharp and Gerhard Esdal guide readers through the reasons why inspection and repair are performed and how both are linked to the management of structural integrity, statutory requirements, and various types of damage. The book addresses critical topics, including the execution and planning of inspection and repair, the tools and methods used, and their deployment underwater. The authors put particular focus on steel and concrete offshore oil and gas installations, but the content is also applicable to the substructures of offshore wind turbines. Underwater Inspection and Repair for Offshore Structures is complementary to the authors’ book Ageing and Life Extension of Offshore Structures, also from Wiley. This important book: Covers current inspection and monitoring techniques to evaluate existing structures Includes coverage of robotic (ROV) inspection and repair methods Provides an overview of repair and maintenance techniques applicable to the splash‐zone and underwater operations Written for engineers, designers, and safety auditors working with offshore structures. Underwater Inspection and Repair for Offshore Structures is a comprehensive resource for understanding how to effectively inspect and repair these vulnerable structures.
Download or read book Code of Federal Regulations written by and published by . This book was released on 2009 with total page 1020 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Naval Station Long Beach Fleet Mooring Inspection Report written by NAVAL FACILITIES ENGINEERING COMMAND WASHINGTON DC CHESAPEAKE DIV. and published by . This book was released on 1982 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of mooring inspections is to determine the general physical condition of the buoys and chain assemblies and, when possible, to verify or update existing as-built and maintenance records. Underwater inspections performed by divers sample only a portion of the submerged buoy hull and chain assemblies in order to compile a general description of the mooring's condition. The existence of fairly consistent measurements during this 'selective sampling' inspection provides a good indication of the installation's overall condition. It should be kept in mind that periodic underwater inspections are intended as an expeditious and relatively inexpensive supplement to accurate maintenance records. A such, they cannot fully substitute for a complete inspection involving recovery of the mooring and the measurement and evaluation of each component.
Download or read book Position and Nearshore Mooring written by Alexander Arnfinn Olsen and published by Springer Nature. This book was released on with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: