Download or read book Gravel Roads written by Ken Skorseth and published by . This book was released on 2000 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this manual is to provide clear and helpful information for maintaining gravel roads. Very little technical help is available to small agencies that are responsible for managing these roads. Gravel road maintenance has traditionally been "more of an art than a science" and very few formal standards exist. This manual contains guidelines to help answer the questions that arise concerning gravel road maintenance such as: What is enough surface crown? What is too much? What causes corrugation? The information is as nontechnical as possible without sacrificing clear guidelines and instructions on how to do the job right.

Download or read book Risk Management in Civil Infrastructure written by Mohammed M. Ettouney and published by CRC Press. This book was released on 2016-12-01 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents several original theories for risk, including Theory of Risk Monitoring, and Theory of Risk Acceptance, in addition to several analytical models for computing relative and absolute risk. The book discusses risk limit, states of risk, and the emerging concept of risk monitoring. The interrelationships between risk and resilience are also highlighted in an objective manner. The book includes several practical case studies showing how risk management and its components can be used to enhance performance of infrastructures at reasonable costs.

Download or read book An Asset Management Approach for Drainage Infrastructure and Culverts written by Mohammad Najafi and published by . This book was released on 2008 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drainage infrastructure systems (culvert, storm sewer, outfall and related drainage elements) are mostly buried underground and are in need of special attention in terms of proactive/preventive asset management strategy. Drainage infrastructure systems represent an integral portion of roadway assets that routinely require inspection, maintenance, repair and renewal. Further challenges are the wide geospatial distribution of these infrastructure assets and environmental exposure. There has been considerable research conducted on culverts, but mostly looked at the problem from a traditional structural/geotechnical perspective. Asset management procedures for culverts and drainage infrastructure systems are complex issues, and can benefit a great deal from an optimal asset management program that draws from programs pertaining to buried pipes. The first and most important step in an asset management initiative is the establishment of mechanism for asset inventory and asset conditions in a format compatible with the routine procedures of field operators and inspectors. The first objective of this research project was to develop field protocols and operational business rules for inventory data collection and management and inspection of drainage infrastructures in terms of types of data to be collected, frequency of inspection, and analysis and reporting mechanisms. After review of these protocols by the project oversight committee, a pilot study was conducted to verify efficiency of their implementation. The condition assessment protocol introduced is useful in evaluating the overall condition of culverts and can be used for decision making regarding the repair, renewal or replacement of culverts. For the second objective of this project, investigators examined the inventory and inspection protocols employed by Ohio Department of Transportation (ODOT) and developed a decision support platform, which establishes a link between the inspection results and appropriate repair, renewal and replacement procedures. After applying the recommended procedures, the transportation agencies can better track the conditions of culverts thereby reducing the risks of culvert failures.

Download or read book Dissertation Abstracts International written by and published by . This book was released on 2006 with total page 860 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Maintenance Safety Risk Management and Life Cycle Performance of Bridges written by Nigel Powers and published by CRC Press. This book was released on 2018-07-04 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges contains lectures and papers presented at the Ninth International Conference on Bridge Maintenance, Safety and Management (IABMAS 2018), held in Melbourne, Australia, 9-13 July 2018. This volume consists of a book of extended abstracts and a USB card containing the full papers of 393 contributions presented at IABMAS 2018, including the T.Y. Lin Lecture, 10 Keynote Lectures, and 382 technical papers from 40 countries. The contributions presented at IABMAS 2018 deal with the state of the art as well as emerging concepts and innovative applications related to the main aspects of bridge maintenance, safety, risk, management and life-cycle performance. Major topics include: new design methods, bridge codes, heavy vehicle and load models, bridge management systems, prediction of future traffic models, service life prediction, residual service life, sustainability and life-cycle assessments, maintenance strategies, bridge diagnostics, health monitoring, non-destructive testing, field testing, safety and serviceability, assessment and evaluation, damage identification, deterioration modelling, repair and retrofitting strategies, bridge reliability, fatigue and corrosion, extreme loads, advanced experimental simulations, and advanced computer simulations, among others. This volume provides both an up-to-date overview of the field of bridge engineering and significant contributions to the process of more rational decision-making on bridge maintenance, safety, risk, management and life-cycle performance of bridges for the purpose of enhancing the welfare of society. The Editors hope that these Proceedings will serve as a valuable reference to all concerned with bridge structure and infrastructure systems, including students, researchers and engineers from all areas of bridge engineering.

Download or read book 18th International Probabilistic Workshop written by José C. Matos and published by Springer Nature. This book was released on 2021-05-07 with total page 855 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the proceedings of the 18th International Probabilistic Workshop (IPW), which was held in Guimarães, Portugal in May 2021. Probabilistic methods are currently of crucial importance for research and developments in the field of engineering, which face challenges presented by new materials and technologies and rapidly changing societal needs and values. Contemporary needs related to, for example, performance-based design, service-life design, life-cycle analysis, product optimization, assessment of existing structures and structural robustness give rise to new developments as well as accurate and practically applicable probabilistic and statistical engineering methods to support these developments. These proceedings are a valuable resource for anyone interested in contemporary developments in the field of probabilistic engineering applications.

Download or read book Water road Interaction Technology Series written by and published by . This book was released on 1997 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Highway Bridge Maintenance Planning and Scheduling written by Mark A. Hurt and published by Butterworth-Heinemann. This book was released on 2016-03-08 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highway Bridge Maintenance Planning and Scheduling provides new tactics for highway departments around the world that are faced with the dilemma of providing improved operations on a shoestring budget. Even after the much needed infrastructure funding is received, the question of which project comes first must be answered. Written by a 20-year veteran with the Kansas Department Of Transportation Bridge Office in design and in maintenance, this book provides Senior Bridge Maintenance Engineers with practical advice on how to create an effective maintenance program that will allow them to not only plan, schedule, direct, and monitor highway bridge repair and rehabilitation projects, but also evaluate all completed work for technical acceptability, productivity, and unit-cost standards. - Provides the tools and methods for building, maintaining, planning, and scheduling effective maintenance - Presents experience-based suggestions for evaluating highway bridges to determine maintenance priorities - Includes methods for evaluating all completed work for technical acceptability, productivity, and unit-cost standards

Download or read book Safety and performance concept Reliability assessment of concrete structures written by fib Fédération internationale du béton and published by FIB - Féd. Int. du Béton. This book was released on 2018-08-01 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete structures have been built for more than 100 years. At first, reinforced concrete was used for buildings and bridges, even for those with large spans. Lack of methods for structural analysis led to conservative and reliable design. Application of prestressed concrete started in the 40s and strongly developed in the 60s. The spans of bridges and other structures like halls, industrial structures, stands, etc. grew significantly larger. At that time, the knowledge of material behaviour, durability and overall structural performance was substantially less developed than it is today. In many countries statically determined systems with a fragile behavior were designed for cast in situ as well as precast structures. Lack of redundancy resulted in a low level of robustness in structural systems. In addition, the technical level of individual technologies (e.g. grouting of prestressed cables) was lower than it is today. The number of concrete structures, including prestressed ones, is extremely high. Over time and with increased loading, the necessity of maintaining safety and performance parameters is impossible without careful maintenance, smaller interventions, strengthening and even larger reconstructions. Although some claim that unsatisfactory structures should be replaced by new ones, it is often impossible, as authorities, in general, have only limited resources. Most structures have to remain in service, probably even longer than initially expected. In order to keep the existing concrete structures in an acceptable condition, the development of methods for monitoring, inspection and assessment, structural identification, nonlinear analysis, life cycle evaluation and safety and prediction of the future behaviour, etc. is necessary. The scatter of individual input parameters must be considered as a whole. This requires probabilistic approaches to individual partial problems and to the overall analysis. The members of the fib Task Group 2.8 “Safety and performance concepts” wrote, on the basis of the actual knowledge and experience, a comprehensive document that provides crucial knowledge for existing structures, which is also applicable to new structures. This guide to good practice is divided into 10 basic chapters dealing with individual issues that are critical for activities associated with preferably existing concrete structures. Bulletin 86 starts with the specification of the performance-based requirements during the entire lifecycle. The risk issues are described in chapter two. An extensive part is devoted to structural reliability, including practical engineering approaches and reliability assessment of existing structures. Safety concepts for design consider the lifetime of structures and summarise safety formats from simple partial safety factors to develop approaches suitable for application in sophisticated, probabilistic, non-linear analyses. Testing for design and the determination of design values from the tests is an extremely important issue. This is especially true for the evaluation of existing structures. Inspection and monitoring of existing structures are essential for maintenance, for the prediction of remaining service life and for the planning of interventions. Chapter nine presents probabilistically-based models for material degradation processes. Finally, case studies are presented in chapter ten. The results of the concrete structures monitoring as well as their application for assessment and prediction of their future behaviour are shown. The risk analysis of highway bridges was based on extensive monitoring and numerical evaluation programs. Case studies perfectly illustrate the application of the methods presented in the Bulletin. The information provided in this guide is very useful for practitioners and scientists. It provides the reader with general procedures, from the specification of requirements, monitoring, assessment to the prediction of the structures’ lifecycles. However, one must have a sufficiently large amount of experimental and other data (e.g. construction experience) in order to use these methods correctly. This data finally allows for a statistical evaluation. As it is shown in case studies, extensive monitoring programs are necessary. The publication of this guide and other documents developed within the fib will hopefully help convince the authorities responsible for safe and fluent traffic on bridges and other structures that the costs spent in monitoring are first rather small, and second, they will repay in the form of a serious assessment providing necessary information for decision about maintenance and future of important structures.

Download or read book Hydrosystems Engineering Reliability Assessment and Risk Analysis written by Yeou-Koung Tung and published by McGraw Hill Professional. This book was released on 2006 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book to integrate reliability analysis and risk assessment with the planning, design, and management of hydrosystems (dams, levees, storm sewers, etc.). Requiring only a basic knowledge of probability and statistics, readers will be able to determine how hydrosystem structures will perform under various circumstances.

Download or read book An Assessment of Performance of Wet Atmospheric Deposition Samplers written by Richard C. Graham and published by . This book was released on 1990 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Monthly Catalog of United States Government Publications written by United States. Superintendent of Documents and published by . This book was released on 1978 with total page 1228 pages. Available in PDF, EPUB and Kindle. Book excerpt: February issue includes Appendix entitled Directory of United States Government periodicals and subscription publications; September issue includes List of depository libraries; June and December issues include semiannual index

Download or read book Public Roads written by and published by . This book was released on 2007 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Managing Selected Transportation Assets written by Michael J. Markow and published by Transportation Research Board. This book was released on 2007 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: NCHRP synthesis 371 explores the state of the practice for managing transportation infrastructure assets other than pavements and bridges, and documents gaps in knowledge and areas in need of potential further study.

Download or read book Soil Steel Bridges written by Damian Beben and published by Springer Nature. This book was released on 2020-03-04 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary objective of this book is to provide designers with a set of analysis and design specifications for soil-steel bridges and culverts, also called flexible structures. Brief but informative, this guide is based on a quick look up approach to code applications, design and analysis methods/calculations as well as applications and solved examples. The book addresses the unique aspects of soil-steel bridges: design and analysis as well as examples of applications, numerical analysis and modeling techniques, corrosion and durability problems, service life and maintenance, and impact of moving loads.

Download or read book Selected Water Resources Abstracts written by and published by . This book was released on 1982 with total page 1060 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Bridge Maintenance Safety Management Life Cycle Sustainability and Innovations written by Hiroshi Yokota and published by CRC Press. This book was released on 2021-04-20 with total page 926 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bridge Maintenance, Safety, Management, Life-Cycle Sustainability and Innovations contains lectures and papers presented at the Tenth International Conference on Bridge Maintenance, Safety and Management (IABMAS 2020), held in Sapporo, Hokkaido, Japan, April 11–15, 2021. This volume consists of a book of extended abstracts and a USB card containing the full papers of 571 contributions presented at IABMAS 2020, including the T.Y. Lin Lecture, 9 Keynote Lectures, and 561 technical papers from 40 countries. The contributions presented at IABMAS 2020 deal with the state of the art as well as emerging concepts and innovative applications related to the main aspects of maintenance, safety, management, life-cycle sustainability and technological innovations of bridges. Major topics include: advanced bridge design, construction and maintenance approaches, safety, reliability and risk evaluation, life-cycle management, life-cycle sustainability, standardization, analytical models, bridge management systems, service life prediction, maintenance and management strategies, structural health monitoring, non-destructive testing and field testing, safety, resilience, robustness and redundancy, durability enhancement, repair and rehabilitation, fatigue and corrosion, extreme loads, and application of information and computer technology and artificial intelligence for bridges, among others. This volume provides both an up-to-date overview of the field of bridge engineering and significant contributions to the process of making more rational decisions on maintenance, safety, management, life-cycle sustainability and technological innovations of bridges for the purpose of enhancing the welfare of society. The Editors hope that these Proceedings will serve as a valuable reference to all concerned with bridge structure and infrastructure systems, including engineers, researchers, academics and students from all areas of bridge engineering.