Download or read book Inorganic Massive Batteries written by Virginie Viallet and published by John Wiley & Sons. This book was released on 2018-05-08 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the 90s, the Li-ion batteries are the most commonly used energy storage systems. The demand for performance and safety is constantly growing, current commercial batteries based liquid electrolytes or gels may not be able to meet the needs of emerging applications such as for electric and hybrid vehicles and renewable energy storage , and it is therefore necessary to develop advanced storage systems with characteristics such that the highest density of energy technology, long life, low cost of production, little or no maintenance and high safety of use. Batteries "all solid" are a technology of choice to meet these requirements. In this technology, the electrolyte separator between the two electrodes is no longer a liquid medium but a solid.
Download or read book Inorganic Battery Materials written by Hailiang Wang and published by . This book was released on 2020 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mass Transfers and Physical Data Estimation written by Abdelhanine Benallou and published by John Wiley & Sons. This book was released on 2019-09-19 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many practical operations, such as environment depollution, blood dialysis or product purification, require matter transfer. With an emphasis on the aforementioned subjects, this book revisits the founding principles of materials transfer on the basis of Fick’s first law, which constitutes the foundation of diffusional phenomena. Additionally, continuity equations translating the macroscopic balances of systems are established. These balances constitute Fick’s second law, which can be applied to quantify the fluxes of matter transferred in each situation, provided physical data is available. To this end, Mass Transfers and Physical Data Estimation pays particular attention to methods of data estimation. Methods presented in this book are applied to several practical cases, such as diffusion in catalytic reactions or the reconstitution of cartilage in human bone joints.
Download or read book Heat Transfer Volume 1 written by Yves Jannot and published by John Wiley & Sons. This book was released on 2023-07-13 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat Transfer 1 deals with conduction and convection. It examines the treatment of transient conduction, which is essential for the optimization of processes and systems, as well as for all energy saving problems. The numerous solved exercises allow the reader to grasp the whole range of applications, whether in the field of building, transport, materials or the environment. The appendices contain all the data needed to solve the exercises and will be a valuable source of information. This book is designed for masters and engineering students who are interested in all aspects of heat transfer, but also for engineers who will find the bases needed to understand similar phenomena (conduction-convection-radiation), but which require a different form of reflection and approach.
Download or read book Electrical Energy Storage for Buildings in Smart Grids written by Benoît Robyns and published by John Wiley & Sons. This book was released on 2019-07-09 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current developments in the renewable energy field, and the trend toward self-production and self-consumption of energy, has led to increased interest in the means of storing electrical energy; a key element of sustainable development. This book provides an in-depth view of the environmentally responsible energy solutions currently available for use in the building sector. It highlights the importance of storing electrical energy, demonstrates the many services that the storage of electrical energy can bring, and discusses the important socio-economic factors related to the emergence of smart buildings and smart grids. Finally, it presents the methodological tools needed to build a system of storage-based energy management, illustrated by concrete, pedagogic examples.
Download or read book Gas Hydrates 2 written by Livio Ruffine and published by John Wiley & Sons. This book was released on 2018-04-16 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas hydrates in their natural environment and for potential industrial applications (Volume 2).
Download or read book Electrical and Mechanical Fault Diagnosis in Wind Energy Conversion Systems written by Monia Ben Khader Bouzid and published by John Wiley & Sons. This book was released on 2023-10-10 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wind energy conversion systems are subject to many different types of faults and therefore fault detection is highly important to ensure reliability and safety. Monitoring systems can help to detect faults before they result in downtime. This book presents efficient methods used to detect electrical and mechanical faults based on electrical signals occurring in the different components of a wind energy conversion system. For example, in a small and high power synchronous generator and multi-phase generator, in the diode bridge rectifier, the gearbox and the sensors. This book also presents a method for keeping the frequency and voltage of the power grid within an allowable range while ensuring the continuity of power supply in the event of a grid fault. Electrical and Mechanical Fault Diagnosis in Wind Energy Conversion Systems presents original results obtained from a variety of research. It will not only be useful as a guideline for the conception of more robust wind turbines systems, but also for engineers monitoring wind turbines and researchers
Download or read book Heat Transfer Volume 2 written by Yves Jannot and published by John Wiley & Sons. This book was released on 2023-08-22 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat Transfer 2 deals with radiation, heat exchangers and flat plate solar collectors. It presents the treatment of radiation in semi-transparent media to be taken into account for insulation or recovery of high temperature waste heat (energy saving in industry), as well as in certain solar applications (energy transition). The numerous solved exercises allow the reader to grasp the whole range of applications, whether in the field of building, transport, materials or the environment. The appendices contain all the data needed to solve the exercises and will be a valuable source of information. This book is designed for masters and engineering students who are interested in all aspects of heat transfer, but also for engineers who will find the bases needed to understand similar phenomena (conduction-convection-radiation), but which require a different form of reflection and approach.
Download or read book Energy and Mass Transfers written by Abdelhanine Benallou and published by John Wiley & Sons. This book was released on 2018-06-21 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book of a series aiming at setting the basics for energy engineering. This book presents the fundamentals of heat and mass transfer with a step-by-step approach, based on material and energy balances. While the topic of heat and mass transfer is an old subject, the way the book introduces the concepts, linking them strongly to the real world and to the present concerns, is particular. The scope of the different developments keeps in mind a practical energy engineering view.
Download or read book Heat Exchangers written by Abdelhanine Benallou and published by John Wiley & Sons. This book was released on 2024-06-05 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: The last few decades have seen huge developments in the use of concentrated solar power plants, communications technologies (mobile telephony and 5G networks), the nuclear sector with its small modular reactors and concentrated solar power stations. These developments have called for a new generation of heat exchangers. As well as presenting conventional heat exchangers (shell-and-tube and plate heat exchangers), their design techniques and calculation algorithms, Heat Exchangers introduces new-generation compact heat exchangers, including printed circuit heat exchangers, plate-fin heat exchangers, spiral heat exchangers, cross-flow tube-fin heat exchangers, phase-change micro-exchangers, spray coolers, heat pipe heat exchangers and evaporation chambers. This new generation of heat exchangers is currently undergoing a boom, with applications in on-board equipment in aircraft, locomotives, space shuttles and mobile phones, where the volume of the equipment is one of the most important design parameters.
Download or read book Electrical Systems 1 written by Abdenour Soualhi and published by John Wiley & Sons. This book was released on 2020-04-09 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methods of diagnosis and prognosis play a key role in the reliability and safety of industrial systems. Failure diagnosis requires the use of suitable sensors, which provide signals that are processed to monitor features (health indicators) for defects. These features are required to distinguish between operating states, in order to inform the operator of the severity level, or even the type, of a failure. Prognosis is defined as the estimation of a system's lifespan, including how long remains and how long has passed. It also encompasses the prediction of impending failures. This is a challenge that many researchers are currently trying to address. Electrical Systems, a book in two volumes, informs readers of the theoretical solutions to this problem, and the results obtained in several laboratories in France, Spain and further afield. To this end, many researchers from the scientific community have contributed to this book to share their research results.
Download or read book Energy Transfers by Convection written by Abdelhanine Benallou and published by John Wiley & Sons. This book was released on 2019-01-03 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Whether in a solar thermal power plant or at the heart of a nuclear reactor, convection is an important mode of energy transfer. This mode is unique; it obeys specific rules and correlations that constitute one of the bases of equipment-sizing equations. In addition to standard aspects of convention, this book examines transfers at very high temperatures where, in order to ensure the efficient transfer of energy for industrial applications, it is becoming necessary to use particular heat carriers, such as molten salts, liquid metals or nanofluids. With modern technologies, these situations are becoming more frequent, requiring appropriate consideration in design calculations. Energy Transfers by Convection also studies the sizing of electronic heat sinks used to ensure the dissipation of heat and thus the optimal operation of circuit boards used in telecommunications, audio equipment, avionics and computers.
Download or read book Smart Power Integration written by Mohamed Abouelatta and published by John Wiley & Sons. This book was released on 2022-09-14 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart power integration is at the crossroads of different fields of electronics such as high and low power, engine control and electrothermal studies of devices and circuits. These circuits are complex and are heavily influenced by substrate coupling, especially where 3D integration is concerned. This book provides an overview of smart power integration, including high voltage devices, dedicated and compatible processes, as well as isolation techniques. Two types of integration are highlighted: modular or hybrid integration, together with compatible devices such as the insulated gate bipolar transistor (IGBT); and monolithic integration, specifically through the paradigm of functional integration. Smart Power Integration outlines the main MOS devices for high voltage integrated circuits, and explores into the fields of codesign, coupling hardware and software design, including applications to motor control. Studies focusing on heat pipes for electronics cooling are also outlined.
Download or read book Energy Transition written by Bernard Lachal and published by John Wiley & Sons. This book was released on 2019-05-29 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although most people are aware of the value of developing new energy technologies, the importance of assessing such technologies is only just beginning to be recognized in full. This book, illustrated by real-life examples, fulfils two main objectives. Firstly, it provides an in-depth summary of energy system evaluation methods, the result of decades of work in this area, for the use of researchers, engineers and anybody else interested in the energy sector. Secondly, the vicious cycle of neglect towards in situ evaluation is broken. This neglect is due to its unjust reputation for being “thankless work”: longwinded, expensive, difficult to exploit and undervalued. By scientifically organizing experience acquired over more than 30 years, Energy Transition highlights the considerable usefulness of the approach, not only economically, but also from a human standpoint.
Download or read book Energy Transfers by Radiation written by Abdelhanine Benallou and published by John Wiley & Sons. This book was released on 2019-05-24 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Inside industrial furnaces and combustion chambers, energy is essentially exchanged by radiation. It is through the same mechanism that the energy emitted by the Sun spreads through different media to reach the Earth. Developing a sound understanding of the laws underlying energy exchanges by radiation is therefore essential, not only for establishing design equations for industrial equipment, but also for an optimal harvesting of solar energy and a better understanding of climate change phenomena such as the greenhouse effect. Energy Transfers by Radiation establishes the basic laws and equations which support the quantification of energy fluxes transferred between surfaces for situations similar to those usually encountered in industrial processes or in solar energy applications.
Download or read book Hybridization Diagnostic and Prognostic of PEM Fuel Cells written by Samir Jemei and published by John Wiley & Sons. This book was released on 2018-10-22 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrogen is the most abundant element in the universe. It has a place in the energy mix of the future, especially regarding fuel cells (FCs). This book is an investigation into FCs. Prominence is given to the subject of PEMFCs (proton exchange membrane fuel cells) as they offer interesting perspectives on transport and stationary applications. This being said, a number of technological and scientific obstacles remain to be overcome before an industrial level of development can be reached.
Download or read book Electrical Systems 2 written by Abdenour Soualhi and published by John Wiley & Sons. This book was released on 2020-06-03 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methods of diagnosis and prognosis play a key role in the reliability and safety of industrial systems. Failure diagnosis requires the use of suitable sensors, which provide signals that are processed to monitor features (health indicators) for defects. These features are required to distinguish between operating states, in order to inform the operator of the severity level, or even the type, of a failure. Prognosis is defined as the estimation of a systems lifespan, including how long remains and how long has passed. It also encompasses the prediction of impending failures. This is a challenge that many researchers are currently trying to address. Electrical Systems, a book in two volumes, informs readers of the theoretical solutions to this problem, and the results obtained in several laboratories in France, Spain and further afield. To this end, many researchers from the scientific community have contributed to this book to share their research results.
