Download or read book Innovative Tools for Scientific Computation in Aeronautical Engineering written by Jacques Periaux and published by . This book was released on 2001 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Computational Methods and Design for Greener Aviation written by Tero Tuovinen and published by Springer. This book was released on 2024-08-08 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a selection of scientific and technical results utilizing new computational methods, tools, and technologies in Aeronautical Design. Delve into the forefront of aerospace technology with this collection of articles featuring insights from the from the ECCOMAS CM3 2021 Thematic Conference in Barcelona and from the Special Technology Sessions of the ECCOMAS Congress 2022 in Oslo. Explore advancements in aeronautics design, numerical methods, and industrial technologies, including aerodynamic optimization and additive manufacturing, with contributions from leading experts and from research projects funded by the European Union. Whether you're a seasoned professional or a student, this volume offers invaluable insights into the future of aviation and transportation.
Download or read book Computational Aerosciences in the 21st Century written by Manuel D. Salas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last decade, the role of computational simulations in all aspects of aerospace design has steadily increased. However, despite the many advances, the time required for computations is far too long. This book examines new ideas and methodologies that may, in the next twenty years, revolutionize scientific computing. The book specifically looks at trends in algorithm research, human computer interface, network-based computing, surface modeling and grid generation and computer hardware and architecture. The book provides a good overview of the current state-of-the-art and provides guidelines for future research directions. The book is intended for computational scientists active in the field and program managers making strategic research decisions.
Download or read book Python for Mechanical and Aerospace Engineering written by Alex Kenan and published by Alex Kenan. This book was released on 2021-01-01 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: The traditional computer science courses for engineering focus on the fundamentals of programming without demonstrating the wide array of practical applications for fields outside of computer science. Thus, the mindset of “Java/Python is for computer science people or programmers, and MATLAB is for engineering” develops. MATLAB tends to dominate the engineering space because it is viewed as a batteries-included software kit that is focused on functional programming. Everything in MATLAB is some sort of array, and it lends itself to engineering integration with its toolkits like Simulink and other add-ins. The downside of MATLAB is that it is proprietary software, the license is expensive to purchase, and it is more limited than Python for doing tasks besides calculating or data capturing. This book is about the Python programming language. Specifically, it is about Python in the context of mechanical and aerospace engineering. Did you know that Python can be used to model a satellite orbiting the Earth? You can find the completed programs and a very helpful 595 page NSA Python tutorial at the book’s GitHub page at https://www.github.com/alexkenan/pymae. Read more about the book, including a sample part of Chapter 5, at https://pymae.github.io
Download or read book Computational Tools and Facilities for the Next generation Analysis and Design Environment written by and published by . This book was released on 1997 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Approaches for Aerospace Design written by Andy Keane and published by John Wiley & Sons. This book was released on 2005-08-05 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last fifty years, the ability to carry out analysis as a precursor to decision making in engineering design has increased dramatically. In particular, the advent of modern computing systems and the development of advanced numerical methods have made computational modelling a vital tool for producing optimized designs. This text explores how computer-aided analysis has revolutionized aerospace engineering, providing a comprehensive coverage of the latest technologies underpinning advanced computational design. Worked case studies and over 500 references to the primary research literature allow the reader to gain a full understanding of the technology, giving a valuable insight into the world’s most complex engineering systems. Key Features: Includes background information on the history of aerospace design and established optimization, geometrical and mathematical modelling techniques, setting recent engineering developments in a relevant context. Examines the latest methods such as evolutionary and response surface based optimization, adjoint and numerically differentiated sensitivity codes, uncertainty analysis, and concurrent systems integration schemes using grid-based computing. Methods are illustrated with real-world applications of structural statics, dynamics and fluid mechanics to satellite, aircraft and aero-engine design problems. Senior undergraduate and postgraduate engineering students taking courses in aerospace, vehicle and engine design will find this a valuable resource. It will also be useful for practising engineers and researchers working on computational approaches to design.
Download or read book Optimal Structural Design written by Nikolay V. Banichuk and published by Walter de Gruyter GmbH & Co KG. This book was released on 2017-09-11 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph studies optimization problems for rigid punches in elastic media and for high-speed penetration of rigid strikers into deformed elastoplastic, concrete, and composite media using variational calculations, tools from functional analysis, and stochastic and min-max (guaranteed) optimization approaches with incomplete data. The book presents analytical and numerical results developed by the authors during the last ten years.
Download or read book Structural Optimization with Uncertainties written by N.V. Banichuk and published by Springer Science & Business Media. This book was released on 2009-12-01 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural optimization is currently attracting considerable attention. Interest in - search in optimal design has grown in connection with the rapid development of aeronautical and space technologies, shipbuilding, and design of precision mach- ery. A special ?eld in these investigations is devoted to structural optimization with incomplete information (incomplete data). The importance of these investigations is explained as follows. The conventional theory of optimal structural design - sumes precise knowledge of material parameters, including damage characteristics and loadings applied to the structure. In practice such precise knowledge is seldom available. Thus, it is important to be able to predict the sensitivity of a designed structure to random ?uctuations in the environment and to variations in the material properties. To design reliable structures it is necessary to apply the so-called gu- anteed approach, based on a “worst case scenario” or a more optimistic probabilistic approach, if we have additional statistical data. Problems of optimal design with incomplete information also have consid- able theoretical importance. The introduction and investigations into new types of mathematical problems are interesting in themselves. Note that some ga- theoretical optimization problems arise for which there are no systematic techniques of investigation. This monograph is devoted to the exposition of new ways of formulating and solving problems of structural optimization with incomplete information. We recall some research results concerning the optimum shape and structural properties of bodies subjected to external loadings.
Download or read book Strength or Accuracy Credit Assignment in Learning Classifier Systems written by Tim Kovacs and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Classifier systems are an intriguing approach to a broad range of machine learning problems, based on automated generation and evaluation of condi tion/action rules. Inreinforcement learning tasks they simultaneously address the two major problems of learning a policy and generalising over it (and re lated objects, such as value functions). Despite over 20 years of research, however, classifier systems have met with mixed success, for reasons which were often unclear. Finally, in 1995 Stewart Wilson claimed a long-awaited breakthrough with his XCS system, which differs from earlier classifier sys tems in a number of respects, the most significant of which is the way in which it calculates the value of rules for use by the rule generation system. Specifically, XCS (like most classifiersystems) employs a genetic algorithm for rule generation, and the way in whichit calculates rule fitness differsfrom earlier systems. Wilson described XCS as an accuracy-based classifiersystem and earlier systems as strength-based. The two differin that in strength-based systems the fitness of a rule is proportional to the return (reward/payoff) it receives, whereas in XCS it is a function of the accuracy with which return is predicted. The difference is thus one of credit assignment, that is, of how a rule's contribution to the system's performance is estimated. XCS is a Q learning system; in fact, it is a proper generalisation of tabular Q-learning, in which rules aggregate states and actions. In XCS, as in other Q-learners, Q-valuesare used to weightaction selection.
Download or read book An Introduction to Theoretical and Computational Aerodynamics written by Jack Moran and published by Courier Corporation. This book was released on 2013-04-22 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concise text discusses properties of wings and airfoils in incompressible and primarily inviscid flow, viscid flows, panel methods, finite difference methods, and computation of transonic flows past thin airfoils. 1984 edition.
Download or read book Applications of Learning Classifier Systems written by Larry Bull and published by Springer. This book was released on 2012-08-13 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field called Learning Classifier Systems is populated with romantics. Why shouldn't it be possible for computer programs to adapt, learn, and develop while interacting with their environments? In particular, why not systems that, like organic populations, contain competing, perhaps cooperating, entities evolving together? John Holland was one of the earliest scientists with this vision, at a time when so-called artificial intelligence was in its infancy and mainly concerned with preprogrammed systems that didn't learn. that, like organisms, had sensors, took Instead, Holland envisaged systems actions, and had rich self-generated internal structure and processing. In so doing he foresaw and his work prefigured such present day domains as reinforcement learning and embedded agents that are now displacing the older "standard Af' . One focus was what Holland called "classifier systems": sets of competing rule like "classifiers", each a hypothesis as to how best to react to some aspect of the environment--or to another rule. The system embracing such a rule "popu lation" would explore its available actions and responses, rewarding and rating the active rules accordingly. Then "good" classifiers would be selected and re produced, mutated and even crossed, a la Darwin and genetics, steadily and reliably increasing the system's ability to cope.
Download or read book Parallel Computational Fluid Dynamics written by Horst D. Simon and published by Mit Press. This book was released on 1992 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Fluid Dynamics (CFD) is one of the most important applications areas for high-performance computing, setting the pace for developments in scientific computing. Anyone who wants to design a new parallel computer or develop a new software tool must understand the issues involved in CFD in order to be successful.The demands of CFD, particularly in the aerospace and automotive industries, coupled with the emergence of more powerful generations of parallel supercomputers, have led naturally to work on parallel computational fluid dynamics; and initial results from using parallel machines to study the properties of liquids and gases in motion are promising.Parallel Computational Fluid Dynamics provides the first survey of this rapidly developing field. Drawn. from such different disciplines as mechanical and aeronautical engineering, computer science, and numerical methods, contributions cover implementations of CFD codes on commercially available large-scale parallel systems, studies of parallel numerical algorithms for CFD applications, and discussions of computer science topics with direct application to parallel CFD.Researchers will find that Parallel Computational Fluid Dynamics serves a number of needs. It presents the expertise of multidisciplinary research groups that will make it possible to succeed in solving the "grand challenge" problems stimulated by the new national High Performance Computing and Communication Program. It offers aeronautical or mechanical engineers an excellent introduction to what has been accomplished in the last few years in CFD on parallel machines. And it provides researchers in the areas of hardware, software, and algorithms with a useful survey of CFD's computational requirements as well as a source of applications to test out new ideas.Horst D. Simon is Department Manager for Computer Sciences Corporation and Research Scientist at NASA Ames Research Center.
Download or read book Modeling and Optimization in Space Engineering written by Giorgio Fasano and published by Springer Science & Business Media. This book was released on 2012-10-23 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents a selection of advanced case studies that address a substantial range of issues and challenges arising in space engineering. The contributing authors are well-recognized researchers and practitioners in space engineering and in applied optimization. The key mathematical modeling and numerical solution aspects of each application case study are presented in sufficient detail. Classic and more recent space engineering problems – including cargo accommodation and object placement, flight control of satellites, integrated design and trajectory optimization, interplanetary transfers with deep space manoeuvres, low energy transfers, magnetic cleanliness modeling, propulsion system design, sensor system placement, systems engineering, space traffic logistics, and trajectory optimization – are discussed. Novel points of view related to computational global optimization and optimal control, and to multidisciplinary design optimization are also given proper emphasis. A particular attention is paid also to scenarios expected in the context of future interplanetary explorations. Modeling and Optimization in Space Engineering will benefit researchers and practitioners working on space engineering applications. Academics, graduate and post-graduate students in the fields of aerospace and other engineering, applied mathematics, operations research and optimal control will also find the book useful, since it discusses a range of advanced model development and solution techniques and tools in the context of real-world applications and new challenges.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Impact of Scientific Computing on Science and Society written by Pekka Neittaanmäki and published by Springer Nature. This book was released on 2023-07-07 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book analyzes the impact of scientific computing in science and society over the coming decades. It presents advanced methods that can provide new possibilities to solve scientific problems and study important phenomena in society. The chapters cover Scientific computing as the third paradigm of science as well as the impact of scientific computing on natural sciences, environmental science, economics, social science, humanistic science, medicine, and engineering. Moreover, the book investigates scientific computing in high performance computing, quantum computing, and artificial intelligence environment and what it will be like in the 2030s and 2040s.
Download or read book Engineering Computations and Modeling in MATLAB Simulink written by Oleg A. Yakimenko and published by Amer Inst of Aeronautics &. This book was released on 2011 with total page 896 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Engineering Computations and Modeling in MATLAB/Simulink" provides a broad overview of The
Download or read book Western Aerospace written by and published by . This book was released on 1961 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt:
