Download or read book Innovative Ti Alloys for Biomedical Applications written by Guanjun Pan and published by LAP Lambert Academic Publishing. This book was released on 2013 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increased applications of titanium and its alloys as biomaterials originates from their lower modulus, superior biocompatibility and better corrosion resistance when compared to conventional stainless and cobalt-based alloys. The topics of this book are composed of two parts, one is bioactive surface using inorganic treatments and grafted ALP molecule, and the other is the effects of rapid solidification and Cu addition on microstructures and martensitic transformation behaviors in Ti-Ni alloy.
Download or read book Titanium Alloys for Biomedical Development and Applications written by Zhentao Yu and published by Elsevier. This book was released on 2022-01-21 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium Alloys for Biomedical Development and Applications: Design, Microstructure, Properties and Application systematically introduces basic theories and progress in the research of biomedical ß-Ti alloys achieved by researchers from different fields. It focuses on a high-strength and low elastic modulus biomedical ß-Ti alloy (TLM), etc. designed by the authors. The alloy design methods, microstructural characteristics, mechanical properties, surface treatment methods and biocompatibility of the TLM alloy are discussed in detail, along with a concise description of the medical devices made from this alloy and the application examples. This book will appeal to researchers as well as students from different disciplines, including materials science, biology, medicine and engineering fields. Fills the knowledge gap in the current research and application of newly developed biomedical ß-Ti alloys Discusses the selection principles used for proper biomedical Ti alloys for medical and dental devices Includes details on the technological data basis for the application of biomedical ß-Ti alloys with a focus on the TLM ß-Ti alloy
Download or read book Titanium in Medical and Dental Applications written by Francis H Froes and published by Woodhead Publishing. This book was released on 2018-05-09 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium in Medical and Dental Applications is an essential reference book for those involved in biomedical materials and advanced metals. Written by well-known experts in the field, it covers a broad array of titanium uses, including implants, instruments, devices, the manufacturing processes used to create them, their properties, corrosion resistance and various fabrication approaches. Biomedical titanium materials are a critically important part of biomaterials, especially in cases where non-metallic biomedical materials are not suited to applications, such as the case of load-bearing implants. The book also covers the use of titanium for implants in the medical and dental fields and reviews the use of titanium for medical instruments and devices. Provides an understanding of the essential and broad applications of Titanium in both the medical and dental industries Discusses the pathways to manufacturing titanium into critical biomedical and dental devices Includes insights into further applications within the industry
Download or read book Medical Applications of Titanium and Its Alloys written by Jack E. Lemons and published by ASTM International. This book was released on 1996 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thirty papers presented at a 1994 symposium cover the basic materials science issues regarding the processing of titanium alloys, and the controversy regarding their use in medicine. Coverage includes orthopaedic, dental, and cardiovascular applications, with a primary focus on the orthopaedic. Info
Download or read book Titanium Based Alloys Characteristics and Applications written by Petrica Vizureanu and published by BoD – Books on Demand. This book was released on 2024-07-24 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium-Based Alloys - Characteristics and Applications is a comprehensive and interdisciplinary book that explores the unique properties and various applications of titanium alloys, being a good reference book for students, engineers, and researchers worldwide. Regardless of their innovative applications in medical implants or industrial applications, this book provides a thorough examination of titanium alloys and offers new innovative solutions. This text aims to enhance comprehension of the future of materials science and engineering by offering a comprehensive examination of present breakthroughs and establishing a basis for stimulating future discoveries.
Download or read book Titanium Based Alloys for Biomedical Applications written by Petrică Vizureanu and published by Materials Research Forum LLC. This book was released on 2020-06-05 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the state-of-the-art of biomaterials used in the human body and reports new research on various Ti-based alloys with non-toxic elements (Mo, Zr, Ta, Si, Nb, etc.) aimed at improved mechanical properties, corrosion resistance and biocompatibility. Specific laboratory tests are reported for structural characterization, mechanical properties and corrosion resistance testing, and cytotoxicity assessment. Keywords: Titanium Alloys, Biomedical Materials, Cytotoxicity Assessment, Biocompatibility, Production and Properties of Ti-Mo-Zr-Ta Alloys, Surface Modification, Powder Metallurgy, Characterization of Ti-Mo-Zr-Ta-Alloys, Mechanical Properties, Differential Scanning Calorimetry, Electrochemical Behavior, Optical Microstructure, X-ray Diffraction, Thermal Characterization, Corrosion Resistance, Medical Applications.
Download or read book Titanium Based Alloys for Biomedical Applications written by Petrică Vizureanu and published by Materials Research Forum LLC. This book was released on 2020-06-05 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the state-of-the-art of biomaterials used in the human body and reports new research on various Ti-based alloys with non-toxic elements (Mo, Zr, Ta, Si, Nb, etc.) aimed at improved mechanical properties, corrosion resistance and biocompatibility. Specific laboratory tests are reported for structural characterization, mechanical properties and corrosion resistance testing, and cytotoxicity assessment. Keywords: Titanium Alloys, Biomedical Materials, Cytotoxicity Assessment, Biocompatibility, Production and Properties of Ti-Mo-Zr-Ta Alloys, Surface Modification, Powder Metallurgy, Characterization of Ti-Mo-Zr-Ta-Alloys, Mechanical Properties, Differential Scanning Calorimetry, Electrochemical Behavior, Optical Microstructure, X-ray Diffraction, Thermal Characterization, Corrosion Resistance, Medical Applications.
Download or read book Development and Application of Biomedical Titanium Alloys written by Liqiang Wang and published by Bentham Science Publishers. This book was released on 2018-04-05 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium and its alloys have been widely used as biomedical implant materials due to their low density, good mechanical properties, superior corrosion resistance and biocompatibility when compared with other metallic biomaterials such as Co–Cr alloys and stainless steels. Recently, β-type titanium alloys have been increasingly considered as excellent implant materials because of the remarkable combination of high strength-to-weight ratio, good fatigue resistance, relatively low Young's modulus, good biocompatibility and high corrosion resistance relative to conventional titanium biomaterials. This book covers recent information about biomedical titanium alloy development and 3D printing. Chapters describe the processing, microstructure, mechanical properties and corrosion properties in detail. Information about the surface modification of titanium alloys for biomedical applications, and manufacturing of titanium alloys by new technologies (such as selective laser melting and electron beam melting), is also presented. Readers will learn about the various types of biomedical titanium alloys, their advantages and disadvantages, their fabrication methods and medical applications. This book is a useful handbook for biomedical engineers, metallurgists and biotechnicians seeking information about titanium-based alloys for biomaterials research and development.
Download or read book Innovations in Biomedical Engineering written by Marek Gzik and published by Springer. This book was released on 2016-10-03 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the “Innovations in Biomedical Engineering IBE’2016” Conference held on October 16–18, 2016 in Poland, discussing recent research on innovations in biomedical engineering. The past decade has seen the dynamic development of more and more sophisticated technologies, including biotechnologies, and more general technologies applied in the area of life sciences. As such the book covers the broadest possible spectrum of subjects related to biomedical engineering innovations. Divided into four parts, it presents state-of-the-art achievements in: • engineering of biomaterials, • modelling and simulations in biomechanics, • informatics in medicine • signal analysis The book helps bridge the gap between technological and methodological engineering achievements on the one hand and clinical requirements in the three major areas diagnosis, therapy and rehabilitation on the other.
Download or read book Titanium Alloys written by Jan Sieniawski and published by BoD – Books on Demand. This book was released on 2013-05-15 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains six chapters and covers topics dealing with biomedical applications of titanium alloys, surface treatment, relationships between microstructure and mechanical and technological properties, and the effect of radiation on the structure of the titanium alloys.
Download or read book Titanium Alloys written by Maciej Motyka and published by BoD – Books on Demand. This book was released on 2019-11-27 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium alloys, due to unique physical and chemical properties (mainly high relative strength combined with very good corrosion resistance), are considered as an important structural metallic material used in hi-tech industries (e.g. aerospace, space technology). This book provides information on new manufacturing and processing methods of single- and two-phase titanium alloys. The eight chapters of this book are distributed over four sections. The first section (Introduction) indicates the main factors determining application areas of titanium and its alloys. The second section (Manufacturing, two chapters) concerns modern production methods for titanium and its alloys. The third section (Thermomechanical and surface treatment, three chapters) covers problems of thermomechanical processing and surface treatment used for single- and two-phase titanium alloys. The fourth section (Machining, two chapters) describes the recent results of high speed machining of Ti-6Al-4V alloy and the possibility of application of sustainable machining for titanium alloys.
Download or read book Innovations in Biomedical Engineering written by Ewaryst Tkacz and published by Springer. This book was released on 2019-08-14 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the “Innovations in Biomedical Engineering IBE’2018” Conference held in Katowice, Poland from October 18 to 20, 2018, and discusses recent research on innovations in biomedical engineering. The book covers a broad range of subjects related to biomedical engineering innovations. Divided into four parts, it presents state-of-the-art advances in: Engineering of biomaterials, Modelling and simulations in biomechanics, Informatics in medicine, and Signal analysis. By doing so, it helps bridge the gap between technological and methodological engineering achievements on the one hand and clinical requirements in the three major areas diagnosis, therapy and rehabilitation on the other.
Download or read book Titanium Alloys written by A.K.M. Nurul Amin and published by BoD – Books on Demand. This book was released on 2012-03-16 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first section of the book includes the following topics: fusion-based additive manufacturing (AM) processes of titanium alloys and their numerical modelling, mechanism of ?-case formation mechanism during investment casting of titanium, genesis of gas-containing defects in cast titanium products. Second section includes topics on behavior of the (? + ?) titanium alloys under extreme pressure and temperature conditions, hot and super plasticity of titanium (? + ?) alloys and some machinability aspects of titanium alloys in drilling. Finally, the third section includes topics on different surface treatment methods including nanotube-anodic layer formation on two phase titanium alloys in phosphoric acid for biomedical applications, chemico-thermal treatment of titanium alloys applying nitriding process for improving corrosion resistance of titanium alloys.
Download or read book Titanium and Titanium Alloys written by Christoph Leyens and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an excellent reference for materials scientists and engineers needing to gain more knowledge about these engineering materials. Following introductory chapters on the fundamental materials properties of titanium, readers will find comprehensive descriptions of the development, processing and properties of modern titanium alloys. There then follows detailed discussion of the applications of titanium and its alloys in aerospace, medicine, energy and automotive technology.
Download or read book Machining of Titanium Alloys written by J. Paulo Davim and published by Springer. This book was released on 2014-07-05 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a collection of examples illustrating the resent research advances in the machining of titanium alloys. These materials have excellent strength and fracture toughness as well as low density and good corrosion resistance; however, machinability is still poor due to their low thermal conductivity and high chemical reactivity with cutting tool materials. This book presents solutions to enhance machinability in titanium-based alloys and serves as a useful reference to professionals and researchers in aerospace, automotive and biomedical fields.
Download or read book Advanced Materials for Emerging Applications Innovations Improvements Inclusion and Impact written by T. S. Srivatsan and published by Bentham Science Publishers. This book was released on 2024-05-17 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Materials for Emerging Applications is a monograph on emerging materials'; materials that have observable differences in physical properties and manufacturing requirements when compared to existing materials and industrial processes. The volume aims to showcase novel materials that can be used in advanced technology and innovative products. The editors have compiled 17 chapters grouped into 3 sections: 1) Metals and Alloys, 2) Composite materials, and 3) Other materials. Chapters 1-5 discuss recent advances in friction stir welding, suitability of nickel-base shape memory alloys, thermal cycling studies of nickel-based shape memory alloys, nitrogen additions to stainless steel, and the evolution of zirconium alloy. Chapters 6-11 cover topics such as additive manufacturing of metal matrix composites, composite materials for biomedical applications, aluminum and magnesium metal matrix composites, aluminum nanocomposites for automobile applications, enhancing the strength of aluminum-boron carbide composites, and sisal fibers reinforced composites. Lastly, chapters 13-17 explore smart hydrogels, engineered iron-oxide nanomaterials for magnetic hyperthermia, emerging sustainable material technology for fire safety, recent advances in unconventional machining of smart alloys, and critical parameters influencing high-strain rate deformation of materials. This monograph provides information for a broad readership including material and manufacturing engineers, researchers, students (at undergraduate levels or above) and entrepreneurs interested in manufacturing new products.
Download or read book Shape Memory Alloys for Biomedical Applications written by T Yoneyama and published by Elsevier. This book was released on 2008-11-21 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shape memory alloys are suitable for a wide range of biomedical applications, such as dentistry, bone repair and cardiovascular stents. Shape memory alloys for biomedical applications provides a comprehensive review of the use of shape memory alloys in these and other areas of medicine. Part one discusses fundamental issues with chapters on such topics as mechanical properties, fabrication of materials, the shape memory effect, superelasticity, surface modification and biocompatibility. Part two covers applications of shape memory alloys in areas such as stents and orthodontic devices as well as other applications in the medical and dental fields. With its distinguished editors and international team of contributors, Shape memory alloys for biomedical applications is an essential reference for materials scientists and engineers working in the medical devices industry and in academia. A comprehensive review of shape memory metals and devices for medical applications Discusses materials, mechanical properties, surface modification and biocompatibility Chapters review medical and dental devices using shape memory metals, including stents and orthodontic devices