Download or read book Innovative Sputtering Techniques for CIS and CdTe Submodule Fabrication written by J. M. Armstrong and published by . This book was released on 1993 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Innovative Sputtering Techniques for CIS and CdTe Submodule Fabrication Annual Subcontract Report 1 September 1991 31 August 1992 written by and published by . This book was released on 1993 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report describes work done during Phase 1 of the subject subcontract. The subcontract was designed to study innovative deposition techniques, such as the rotating cylindrical magnetron sputtering system and electrodeposition for large-area, low-cost copper indium diselenide (CIS) and cadmium telluride (CdTe) devices. A key issue for photovoltaics (PV) in terrestrial and future space applications is producibility, particularly for applications using a large quantity of PV. Among the concerns for fabrication of polycrystalline thin-film PV, such as CIS and CdTe, are production volume, cost, and minimization of waste. Both rotating cylindrical magnetron (C-Mag{trademark}) sputtering and electrodeposition have tremendous potential for the fabrication of polycrystalline thin-film PV due to scaleability, efficient utilization of source materials, and inherently higher deposition rates. In the case of sputtering, the unique geometry of the C-Mae facilitates innovative cosputtering and reactive sputtering that could lead to greater throughput reduced health and safety risks, and, ultimately, lower fabrication cost. Electrodeposited films appear to be adherent and comparable with low-cost fabrication techniques. Phase I involved the initial film and device fabrication using the two techniques mentioned herein. Devices were tested by both internal facilities, as well as NREL and ISET.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1993 with total page 1052 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiannual, with semiannual and annual indexes. References to all scientific and technical literature coming from DOE, its laboratories, energy centers, and contractors. Includes all works deriving from DOE, other related government-sponsored information, and foreign nonnuclear information. Arranged under 39 categories, e.g., Biomedical sciences, basic studies; Biomedical sciences, applied studies; Health and safety; and Fusion energy. Entry gives bibliographical information and abstract. Corporate, author, subject, report number indexes.
Download or read book Government Reports Annual Index written by and published by . This book was released on 1993 with total page 1296 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Synerjy written by and published by . This book was released on 1991 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Government Reports Announcements Index written by and published by . This book was released on 1993-08 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book China written by World Bank and published by World Bank Publications. This book was released on 1993 with total page 1422 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Republic of Korea's industrial policy has directed that nation's economy through nearly three decades of spectacular growth. But the authors of this paper maintain that this policy is showing signs of being outmoded. The time has come, the authors argue, for the Korean government to stop managing the economy's structural development and to redefine the responsibilities of business and government. Under this proposed compact, the allocation of resources would shift from the government to the private industrial and financial sectors. The transformation of the government bureaucracy from an ad hoc policy role to one of a transparent and predictable regulator is a key to the success of this undertaking. These new directions would present the government with enormous challenges. Greater competitive discipline and regulatory oversight would be required. While dealing with the complexities of the transition, the government would have to maintain macroeconomic stability and the momentum of savings and investment. For comparison, the study examines the industrial economies of France, Germany, Japan, and the United States, which underwent similar shifts.
Download or read book Solar Energy written by Christoph Richter and published by Springer. This book was released on 2012-11-29 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gathering some 30 entries from the Encyclopedia of Sustainability Science and Technology, this book presents fundamental principles and technologies for sustainably harnessing solar energy. Covers photovoltaics, solar thermal energy, solar radiation and more.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1979 with total page 1038 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Terrestrial Photovoltaic Measurements written by and published by . This book was released on 1975 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Solar Cells and Modules written by Arvind Shah and published by Springer Nature. This book was released on 2020-07-16 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a comprehensive introduction to the field of photovoltaic (PV) solar cells and modules. In thirteen chapters, it addresses a wide range of topics including the spectrum of light received by PV devices, the basic functioning of a solar cell, and the physical factors limiting the efficiency of solar cells. It places particular emphasis on crystalline silicon solar cells and modules, which constitute today more than 90 % of all modules sold worldwide. Describing in great detail both the manufacturing process and resulting module performance, the book also touches on the newest developments in this sector, such as Tunnel Oxide Passivated Contact (TOPCON) and heterojunction modules, while dedicating a major chapter to general questions of module design and fabrication. Overall, it presents the essential theoretical and practical concepts of PV solar cells and modules in an easy-to-understand manner and discusses current challenges facing the global research and development community.
Download or read book Photovoltaic Manufacturing written by Monika Freunek Muller and published by John Wiley & Sons. This book was released on 2021-08-16 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: PHOTOVOLTAIC MANUFACTURING This book covers the state-of-the-art and the fundamentals of silicon wafer solar cells manufacturing, written by world-class researchers and experts in the field. High quality and economic photovoltaic manufacturing is central to realizing reliable photovoltaic power supplies at reasonable cost. While photovoltaic silicon wafer manufacturing is at a mature, industrial and mass production stage, knowing and applying the fundamentals in solar manufacturing is essential to anyone working in this field. This is the first book on photovoltaic wet processing for silicon wafers, both mono- and multi-crystalline. The comprehensive book provides information for process, equipment, and device engineers and researchers in the solar manufacturing field. The authors of the chapters are world-class researchers and experts in their field of endeavor. The fundamentals of wet processing chemistry are introduced, covering etching, texturing, cleaning and metrology. New developments, innovative approaches, as well as current challenges are presented. Benefits of reading the book include: The book includes a detailed discussion of the important new development of black silicon, which is considered to have started a new wave in photovoltaics and become the new standard while substantially lowering the cost. Photovoltaics are central to any country’s “New Green Deal” and this book shows how to manufacture competitively. The book’s central goal is to show photovoltaic manufacturing can be done with enhanced quality and lowering costs. Audience Engineers, chemists, physicists, process technologists, in both academia and industry, that work with photovoltaics and their manufacture.
Download or read book Government Reports Announcements Index written by and published by . This book was released on 1989 with total page 1052 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Encyclopedia of Sustainability Science and Technology written by Robert A. Meyers and published by Springer. This book was released on 2012-09-30 with total page 12555 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Encyclopedia of Sustainability Science and Technology (ESST) addresses the grand challenge for science and engineering today. It provides unprecedented, peer-reviewed coverage in more than 550 separate entries comprising 38 topical sections. ESST establishes a foundation for the many sustainability and policy evaluations being performed in institutions worldwide. An indispensable resource for scientists and engineers in developing new technologies and for applying existing technologies to sustainability, the Encyclopedia of Sustainability Science and Technology is presented at the university and professional level needed for scientists, engineers, and their students to support real progress in sustainability science and technology. Although the emphasis is on science and technology rather than policy, the Encyclopedia of Sustainability Science and Technology is also a comprehensive and authoritative resource for policy makers who want to understand the scope of research and development and how these bottom-up innovations map on to the sustainability challenge.
Download or read book Materials Science and Technology Strained Layer Superlattices written by and published by Academic Press. This book was released on 1991-02-20 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: The following blurb to be used for the AP Report and ATI only as both volumes will not appear together there.****Strained-layer superlattices have been developed as an important new form of semiconducting material with applications in integrated electro-optics and electronics. Edited by a pioneer in the field, Thomas Pearsall, this volume offers a comprehensive discussion of strained-layer superlattices and focuses on fabrication technology and applications of the material. This volume combines with Volume 32, Strained-Layer Superlattices: Physics, in this series to cover a broad spectrum of topics, including molecular beam epitaxy, quantum wells and superlattices, strain-effects in semiconductors, optical and electrical properties of semiconductors, and semiconductor devices.****The following previously approved blurb is to be used in all other direct mail and advertising as both volumes will be promoted together.****Strained-layer superlattices have been developed as an important new form of semiconducting material with applications in integrated electro-optics and electronics. Edited by a pioneer in the field, Thomas Pearsall, this two-volume survey offers a comprehensive discussion of the physics of strained-layer superlattices (Volume 32), as well as detailing fabrication technology and applications of the material (Volume 33). Although each volume is edited to stand alone, the two books combine to cover a broad spectrum of topics, including molecular beam epitaxy, quantum wells and superlattices, strain-effects in semiconductors, optical and electrical properties of semiconductors, and semiconductor devices.
