Download or read book Innovative Sputtering Techniques for CIS and CdTe Submodule Fabrication written by and published by . This book was released on 1993 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report describes work done during Phase 1 of the subject subcontract. The subcontract was designed to study innovative deposition techniques, such as the rotating cylindrical magnetron sputtering system and electrodeposition for large-area, low-cost copper indium diselenide (CIS) and cadmium telluride (CdTe) devices. A key issue for photovoltaics (PV) in terrestrial and future space applications is producibility, particularly for applications using a large quantity of PV. Among the concerns for fabrication of polycrystalline thin-film PV, such as CIS and CdTe, are production volume, cost, and minimization of waste. Both rotating cylindrical magnetron (C-Mag[trademark]) sputtering and electrodeposition have tremendous potential for the fabrication of polycrystalline thin-film PV due to scaleability, efficient utilization of source materials, and inherently higher deposition rates. In the case of sputtering, the unique geometry of the C-Mae facilitates innovative cosputtering and reactive sputtering that could lead to greater throughput reduced health and safety risks, and, ultimately, lower fabrication cost. Electrodeposited films appear to be adherent and comparable with low-cost fabrication techniques. Phase I involved the initial film and device fabrication using the two techniques mentioned herein. Devices were tested by both internal facilities, as well as NREL and ISET.
Download or read book Innovative Sputtering Techniques for CIS and CdTe Submodule Fabrication Annual Subcontract Report 1 September 1991 31 August 1992 written by and published by . This book was released on 1993 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report describes work done during Phase 1 of the subject subcontract. The subcontract was designed to study innovative deposition techniques, such as the rotating cylindrical magnetron sputtering system and electrodeposition for large-area, low-cost copper indium diselenide (CIS) and cadmium telluride (CdTe) devices. A key issue for photovoltaics (PV) in terrestrial and future space applications is producibility, particularly for applications using a large quantity of PV. Among the concerns for fabrication of polycrystalline thin-film PV, such as CIS and CdTe, are production volume, cost, and minimization of waste. Both rotating cylindrical magnetron (C-Mag{trademark}) sputtering and electrodeposition have tremendous potential for the fabrication of polycrystalline thin-film PV due to scaleability, efficient utilization of source materials, and inherently higher deposition rates. In the case of sputtering, the unique geometry of the C-Mae facilitates innovative cosputtering and reactive sputtering that could lead to greater throughput reduced health and safety risks, and, ultimately, lower fabrication cost. Electrodeposited films appear to be adherent and comparable with low-cost fabrication techniques. Phase I involved the initial film and device fabrication using the two techniques mentioned herein. Devices were tested by both internal facilities, as well as NREL and ISET.
Download or read book Innovative Sputtering Techniques for CIS and CdTe Submodule Fabrication written by J. M. Armstrong and published by . This book was released on 1993 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1993 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1993 with total page 1052 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiannual, with semiannual and annual indexes. References to all scientific and technical literature coming from DOE, its laboratories, energy centers, and contractors. Includes all works deriving from DOE, other related government-sponsored information, and foreign nonnuclear information. Arranged under 39 categories, e.g., Biomedical sciences, basic studies; Biomedical sciences, applied studies; Health and safety; and Fusion energy. Entry gives bibliographical information and abstract. Corporate, author, subject, report number indexes.
Download or read book China written by World Bank and published by World Bank Publications. This book was released on 1993 with total page 1422 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Republic of Korea's industrial policy has directed that nation's economy through nearly three decades of spectacular growth. But the authors of this paper maintain that this policy is showing signs of being outmoded. The time has come, the authors argue, for the Korean government to stop managing the economy's structural development and to redefine the responsibilities of business and government. Under this proposed compact, the allocation of resources would shift from the government to the private industrial and financial sectors. The transformation of the government bureaucracy from an ad hoc policy role to one of a transparent and predictable regulator is a key to the success of this undertaking. These new directions would present the government with enormous challenges. Greater competitive discipline and regulatory oversight would be required. While dealing with the complexities of the transition, the government would have to maintain macroeconomic stability and the momentum of savings and investment. For comparison, the study examines the industrial economies of France, Germany, Japan, and the United States, which underwent similar shifts.
Download or read book Synerjy written by and published by . This book was released on 1991 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Government Reports Annual Index written by and published by . This book was released on 1993 with total page 1300 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Government Reports Announcements Index written by and published by . This book was released on 1993 with total page 1802 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thin Film Solar Cells written by Jef Poortmans and published by John Wiley & Sons. This book was released on 2006-10-16 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin-film solar cells are either emerging or about to emerge from the research laboratory to become commercially available devices finding practical various applications. Currently no textbook outlining the basic theoretical background, methods of fabrication and applications currently exist. Thus, this book aims to present for the first time an in-depth overview of this topic covering a broad range of thin-film solar cell technologies including both organic and inorganic materials, presented in a systematic fashion, by the scientific leaders in the respective domains. It covers a broad range of related topics, from physical principles to design, fabrication, characterization, and applications of novel photovoltaic devices.
Download or read book High Efficient Low Cost Photovoltaics written by Vesselinka Petrova-Koch and published by Springer Science & Business Media. This book was released on 2009 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: A bird's-eye view of the developmental trends and problems of recent photovoltaics is presented. The worldwide effort to develop high-efficiency low-cost PV modules, making use of most efficient solar cells and clever low-cost solar concentrators is described.
Download or read book Intelligent Energy Management Technologies written by Mohammad Shorif Uddin and published by Springer Nature. This book was released on 2020-12-01 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of best selected high-quality research papers presented at the International Conference on Advances in Energy Management (ICAEM 2019) organized by the Department of Electrical Engineering, Jodhpur Institute of Engineering & Technology (JIET), Jodhpur, India, during 20–21 December 2019. The book discusses intelligent energy management technologies which are cost effective compared to the high cost of fossil fuels. This book also explains why these systems have beneficial impact on environmental, economic and political issues of the world. The book is immensely useful for research scholars, academicians, R&D institutions, practicing engineers and managers from industry.
Download or read book Optical Thin Films and Coatings written by Angela Piegari and published by Woodhead Publishing. This book was released on 2018-06-19 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical Thin Films and Coatings: From Materials to Applications, Second Edition, provides an overview of thin film materials and their properties, design and manufacture across a wide variety of application areas. Sections explore their design and manufacture and their unconventional features, including the scattering properties of random structures in thin films, optical properties at short wavelengths, thermal properties and color effects. Other chapters focus on novel materials, including organic optical coatings, surface multiplasmonics, optical thin films containing quantum dots, and optical coatings, including laser components, solar cells, displays and lighting, and architectural and automotive glass. The book presents a technical resource for researchers and engineers working with optical thin films and coatings. It is also ideal for professionals in the security, automotive, space and other industries who need an understanding of the topic. - Provides thorough review of applications of optical coatings including laser components, solar cells, glazing, displays and lighting - One-stop reference that addresses deposition techniques, properties, and applications of optical thin films and coatings - Novel methods, suggestions for analysis, and applications makes this a valuable resource for experts in the field as well
Download or read book The Performance of Photovoltaic PV Systems written by Nicola Pearsall and published by Woodhead Publishing. This book was released on 2016-10-15 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Performance of Photovoltaic (PV) Systems: Modelling, Measurement and Assessment explores the system lifetime of a PV system and the energy output of the system over that lifetime. The book concentrates on the prediction, measurement, and assessment of the performance of PV systems, allowing the reader to obtain a thorough understanding of the performance issues and progress that has been made in optimizing system performance. - Provides unique insights into the performance of photovoltaic systems - Includes comprehensive and systematic coverage of a fascinating area in energy - Written by an expert team of authors and a respected editor
Download or read book Perovskite Solar Cells written by Shahzada Ahmad and published by John Wiley & Sons. This book was released on 2022-03-14 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents a thorough overview of perovskite research, written by leaders in the field of photovoltaics The use of perovskite-structured materials to produce high-efficiency solar cells is a subject of growing interest for academic researchers and industry professionals alike. Due to their excellent light absorption, longevity, and charge-carrier properties, perovskite solar cells show great promise as a low-cost, industry-scalable alternative to conventional photovoltaic cells. Perovskite Solar Cells: Materials, Processes, and Devices provides an up-to-date overview of the current state of perovskite solar cell research. Addressing the key areas in the rapidly growing field, this comprehensive volume covers novel materials, advanced theory, modelling and simulation, device physics, new processes, and the critical issue of solar cell stability. Contributions by an international panel of researchers highlight both the opportunities and challenges related to perovskite solar cells while offering detailed insights on topics such as the photon recycling processes, interfacial properties, and charge transfer principles of perovskite-based devices. Examines new compositions, hole and electron transport materials, lead-free materials, and 2D and 3D materials Covers interface modelling techniques, methods for modelling in two and three dimensions, and developments beyond Shockley-Queisser Theory Discusses new fabrication processes such as slot-die coating, roll processing, and vacuum sublimation Describes the device physics of perovskite solar cells, including recombination kinetics and optical absorption Explores innovative approaches to increase the light conversion efficiency of photovoltaic cells Perovskite Solar Cells: Materials, Processes, and Devices is essential reading for all those in the photovoltaic community, including materials scientists, surface physicists, surface chemists, solid state physicists, solid state chemists, and electrical engineers.
Download or read book Solar Cells and Modules written by Arvind Shah and published by Springer Nature. This book was released on 2020-07-16 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a comprehensive introduction to the field of photovoltaic (PV) solar cells and modules. In thirteen chapters, it addresses a wide range of topics including the spectrum of light received by PV devices, the basic functioning of a solar cell, and the physical factors limiting the efficiency of solar cells. It places particular emphasis on crystalline silicon solar cells and modules, which constitute today more than 90 % of all modules sold worldwide. Describing in great detail both the manufacturing process and resulting module performance, the book also touches on the newest developments in this sector, such as Tunnel Oxide Passivated Contact (TOPCON) and heterojunction modules, while dedicating a major chapter to general questions of module design and fabrication. Overall, it presents the essential theoretical and practical concepts of PV solar cells and modules in an easy-to-understand manner and discusses current challenges facing the global research and development community.
Download or read book Solar Energy written by Christoph Richter and published by Springer. This book was released on 2012-11-29 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gathering some 30 entries from the Encyclopedia of Sustainability Science and Technology, this book presents fundamental principles and technologies for sustainably harnessing solar energy. Covers photovoltaics, solar thermal energy, solar radiation and more.
