Download or read book Innovative Growth and Defect Analysis of Group III Nitrides for High Speed Electronics written by and published by . This book was released on 2008 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: The project focused on novel techniques in growth and characterization which may enhance group III - nitride applications. On the growth side nitride deposition on diamond templates was characterized as the most promising novel growth techniques. The continuing progress can be supported applying the novel characterization technique described below. Local inhomogeneities are a common feature in group III - nitrides. With standard characterization methods such materials cannot be properly evaluated. Multiple group III - nitride epilayers were investigated utilizing VEELS in combination with high resolution TEM in order to characterize the materials in high spatial and energy resolution. It was found that possible side effects such as sample damage due to electron irradiation or falsified results due to retardation effects can be avoided if proper sample treatment is applied. It is assumed that the occurrence of local electronic transitions in close vicinity to interfaces is due to the presence of local point or surface defects. For the first time it may become possible to investigate the impact of such defects on the performance of devices. For the InGaN alloy system nano-cluster formation which changes optical responses was investigated. It was found that the III-V compound InN exists as a composite InN:In material. InN commonly exhibits multiple optical responses including an interface and/or surface related effect, which triggered confusing scientific models in the past. The prospect of exploiting multiple energy transitions within ONE material offers completely new alternatives for novel device development.
Download or read book III Nitride Semiconductors written by M.O. Manasreh and published by Elsevier. This book was released on 2000-12-06 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research advances in III-nitride semiconductor materials and device have led to an exponential increase in activity directed towards electronic and optoelectronic applications. There is also great scientific interest in this class of materials because they appear to form the first semiconductor system in which extended defects do not severely affect the optical properties of devices. The volume consists of chapters written by a number of leading researchers in nitride materials and device technology with the emphasis on the dopants incorporations, impurities identifications, defects engineering, defects characterization, ion implantation, irradiation-induced defects, residual stress, structural defects and phonon confinement. This unique volume provides a comprehensive review and introduction of defects and structural properties of GaN and related compounds for newcomers to the field and stimulus to further advances for experienced researchers. Given the current level of interest and research activity directed towards nitride materials and devices, the publication of the volume is particularly timely. Early pioneering work by Pankove and co-workers in the 1970s yielded a metal-insulator-semiconductor GaN light-emitting diode (LED), but the difficulty of producing p-type GaN precluded much further effort. The current level of activity in nitride semiconductors was inspired largely by the results of Akasaki and co-workers and of Nakamura and co-workers in the late 1980s and early 1990s in the development of p-type doping in GaN and the demonstration of nitride-based LEDs at visible wavelengths. These advances were followed by the successful fabrication and commercialization of nitride blue laser diodes by Nakamura et al at Nichia. The chapters contained in this volume constitutes a mere sampling of the broad range of research on nitride semiconductor materials and defect issues currently being pursued in academic, government, and industrial laboratories worldwide.
Download or read book Optoelectronic Devices written by M Razeghi and published by Elsevier. This book was released on 2004 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tremendous progress has been made in the last few years in the growth, doping and processing technologies of the wide bandgap semiconductors. As a result, this class of materials now holds significant promis for semiconductor electronics in a broad range of applications. The principal driver for the current revival of interest in III-V Nitrides is their potential use in high power, high temperature, high frequency and optical devices resistant to radiation damage. This book provides a wide number of optoelectronic applications of III-V nitrides and covers the entire process from growth to devices and applications making it essential reading for those working in the semiconductors or microelectronics. Broad review of optoelectronic applications of III-V nitrides
Download or read book Diode Lasers and Photonic Integrated Circuits written by Larry A. Coldren and published by John Wiley & Sons. This book was released on 2012-03-02 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diode Lasers and Photonic Integrated Circuits, Second Edition provides a comprehensive treatment of optical communication technology, its principles and theory, treating students as well as experienced engineers to an in-depth exploration of this field. Diode lasers are still of significant importance in the areas of optical communication, storage, and sensing. Using the the same well received theoretical foundations of the first edition, the Second Edition now introduces timely updates in the technology and in focus of the book. After 15 years of development in the field, this book will offer brand new and updated material on GaN-based and quantum-dot lasers, photonic IC technology, detectors, modulators and SOAs, DVDs and storage, eye diagrams and BER concepts, and DFB lasers. Appendices will also be expanded to include quantum-dot issues and more on the relation between spontaneous emission and gain.
Download or read book Ceramic Abstracts written by and published by . This book was released on 1997 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book III Nitride Based Light Emitting Diodes and Applications written by Tae-Yeon Seong and published by Springer Science & Business Media. This book was released on 2014-07-08 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Light emitting diodes (LEDs) are already used in traffic signals, signage lighting, and automotive applications. However, its ultimate goal is to replace traditional illumination through LED lamps since LED lighting significantly reduces energy consumption and cuts down on carbon-dioxide emission. Despite dramatic advances in LED technologies (e.g., growth, doping and processing technologies), however, there remain critical issues for further improvements yet to be achieved for the realization of solid-state lighting. This book aims to provide the readers with some contemporary LED issues, which have not been comprehensively discussed in the published books and, on which the performance of LEDs is seriously dependent. For example, most importantly, there must be a breakthrough in the growth of high-quality nitride semiconductor epitaxial layers with a low density of dislocations, in particular, in the growth of Al-rich and and In-rich GaN-based semiconductors. The materials quality is directly dependent on the substrates used, such as sapphire, Si, etc. In addition, efficiency droop, growth on different orientations and polarization are also important. Chip processing and packaging technologies are key issues. This book presents a comprehensive review of contemporary LED issues. Given the interest and importance of future research in nitride semiconducting materials and solid state lighting applications, the contents are very timely. The book is composed of chapters written by leading researchers in III-nitride semiconducting materials and device technology. This book will be of interest to scientists and engineers working on LEDs for lighting applications. Postgraduate researchers working on LEDs will also benefit from the issues this book provides.
Download or read book III nitride Devices and Nanoengineering written by Zhe Chuan Feng and published by World Scientific. This book was released on 2008 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Devices, nanoscale science and technologies based on GaN and related materials, have achieved great developments in recent years. New GaN-based devices such as UV detectors, fast p-HEMT and microwave devices are developed far more superior than other semiconductor materials-based devices.Written by renowned experts, the review chapters in this book cover the most important topics and achievements in recent years, discuss progress made by different groups, and suggest future directions. Each chapter also describes the basis of theory and experiment.This book is an invaluable resource for device design and processing engineers, material growers and evaluators, postgraduates and scientists as well as newcomers in the GaN field.
Download or read book Nitride Semiconductors Volume 482 written by Materials Research Society. Meeting and published by . This book was released on 1998-04-20 with total page 1274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is on recent experimental and theoretical progress in the rapidly growing field of III-V nitrides. Issues related to crystal growth (bulk and thin films), structure and microstructure, formation of defects, doping, alloying, formation of heterostructures, determination of physical properties and device fabrication and evaluation are addressed. Papers show much progress in the growth and understanding of III-V nitrides and in the production of optoelectronic devices based on these materials. Most exciting is the fact that light-emitting diodes and laser diodes have now reached amazing levels of performance which forecasts a revolution in lighting, optical storage, printing, and display technologies. Topics include: crystal growth- bulk growth, early stages of epitaxy; crystal growth- MOCVD; growth techniques - MBE and HVPE; novel substrates and growth techniques; structural properties; electronic properties; luminescence and recombination; characterization, elemental and stress analysis; physical modelling; device processing, implantation, annealing; device characterization, contacts, degradation; and injection laser diodes and applications.
Download or read book Iii nitride Semiconductor Materials written by Zhe Chuan Feng and published by World Scientific. This book was released on 2006-03-20 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: III-Nitride semiconductor materials — (Al, In, Ga)N — are excellent wide band gap semiconductors very suitable for modern electronic and optoelectronic applications. Remarkable breakthroughs have been achieved recently, and current knowledge and data published have to be modified and upgraded. This book presents the new developments and achievements in the field.Written by renowned experts, the review chapters in this book cover the most important topics and achievements in recent years, discuss progress made by different groups, and suggest future directions. Each chapter also describes the basis of theory or experiment.The III-Nitride-based industry is building up and new economic developments from these materials are promising. It is expected that III-Nitride-based LEDs may replace traditional light bulbs to realize a revolution in lighting. This book is a valuable source of information for engineers, scientists and students working towards such goals./a
Download or read book Ultra wide Bandgap Semiconductor Materials written by Meiyong Liao and published by Elsevier. This book was released on 2019-06-18 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultra-wide Bandgap Semiconductors (UWBG) covers the most recent progress in UWBG materials, including sections on high-Al-content AlGaN, diamond, B-Ga2O3, and boron nitrides. The coverage of these materials is comprehensive, addressing materials growth, physics properties, doping, device design, fabrication and performance. The most relevant and important applications are covered, including power electronics, RF electronics and DUV optoelectronics. There is also a chapter on novel structures based on UWBG, such as the heterojunctions, the low-dimensional structures, and their devices. This book is ideal for materials scientists and engineers in academia and R&D searching for materials superior to silicon carbide and gallium nitride. Provides a one-stop resource on the most promising ultra-wide bandgap semiconducting materials, including high-Al-content AlGaN, diamond, β-Ga2O3, boron nitrides, and low-dimensional materials Presents comprehensive coverage, from materials growth and properties, to device design, fabrication and performance Features the most relevant applications, including power electronics, RF electronics and DUV optoelectronics
Download or read book Dilute Nitride Semiconductors written by Mohamed Henini and published by Elsevier. This book was released on 2004-12-15 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains full account of the advances made in the dilute nitrides, providing an excellent starting point for workers entering the field. It gives the reader easier access and better evaluation of future trends, Conveying important results and current ideas. Includes a generous list of references at the end of each chapter, providing a useful reference to the III-V-N based semiconductors research community. The high speed lasers operating at wavelength of 1.3 μm and 1.55 μm are very important light sources in optical communications since the optical fiber used as a transport media of light has dispersion and attenuation minima, respectively, at these wavelengths. These long wavelengths are exclusively made of InP-based material InGaAsP/InP. However, there are several problems with this material system. Therefore, there has been considerable effort for many years to fabricate long wavelength laser structures on other substrates, especially GaAs. The manufacturing costs of GaAs-based components are lower and the processing techniques are well developed. In 1996 a novel quaternary material GaInAsN was proposed which could avoid several problems with the existing technology of long wavelength lasers. In this book, several leaders in the field of dilute nitrides will cover the growth and processing, experimental characterization, theoretical understanding, and device design and fabrication of this recently developed class of semiconductor alloys. They will review their current status of research and development. Dilute Nitrides (III-N-V) Semiconductors: Physics and Technology organises the most current available data, providing a ready source of information on a wide range of topics, making this book essential reading for all post graduate students, researchers and practitioners in the fields of Semiconductors and Optoelectronics Contains full account of the advances made in the dilute nitrides, providing an excellent starting point for workers entering the field Gives the reader easier access and better evaluation of future trends, conveying important results and current ideas Includes a generous list of references at the end of each chapter, providing a useful reference to the III-V-N based semiconductors research community
Download or read book Polarization Effects in Semiconductors written by Debdeep Jena and published by Springer Science & Business Media. This book was released on 2008 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polarization Effects in Semiconductors: From Ab Initio Theory to Device Applications presents the latest understanding of the solid state physics, electronic implications and practical applications of the unique spontaneous or pyro-electric polarization charge of wurtzite compound semiconductors, and associated piezo-electric effects in strained thin film heterostructures. These heterostructures are used in wide band gap semiconductor based sensors, in addition to various electronic and opto-electronic semiconductor devices. The book covers the ab initio theory of polarization in cubic and hexagonal semiconductors, growth of thin film GaN, GaN/AlGaN GaAlN/ AlGaInN, and other nitrides, and SiC heterostructures. It discusses the effects of spontaneous and piezoelectric polarization on band diagrams and electronic properties of abrupt and compositionally graded heterostructures, electronic characterization of polarization-induced charge distributions by scanning-probe spectroscopies, and gauge factors and strain effects. In addition, polarization in extended defects, piezo-electric strain/charge engineering, and application to device design and processing are covered. The effects of polarization on the fundamental electron transport properties, and on the basic optical transitions are described. The crucial role of polarization in devices such as high electron mobility transistors (HEMTs) and light-emitting diodes (LEDs) is covered. The chapters are authored by professors and researchers in the fields of physics, applied physics and electrical engineering, who worked for 5 years under the "Polarization Effects in Semiconductors" DOD funded Multi Disciplinary University Research Initiative. This book will be of interest to graduate students and researchers working in the field of wide-bandgap semiconductor physics and their device applications. It will also be useful for practicing engineers in the field of wide-bandgap semiconductor device research and development.
Download or read book III Nitride Electronic Devices written by Rongming Chu and published by Academic Press. This book was released on 2019-10 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: III-Nitride Electronic Devices, Volume 102, emphasizes two major technical areas advanced by this technology: radio frequency (RF) and power electronics applications. The range of topics covered by this book provides a basic understanding of materials, devices, circuits and applications while showing the future directions of this technology. Specific chapters cover Electronic properties of III-nitride materials and basics of III-nitride HEMT, Epitaxial growth of III-nitride electronic devices, III-nitride microwave power transistors, III-nitride millimeter wave transistors, III-nitride lateral transistor power switch, III-nitride vertical devices, Physics-Based Modeling, Thermal management in III-nitride HEMT, RF/Microwave applications of III-nitride transistor/wireless power transfer, and more. Presents a complete review of III-Nitride electronic devices, from fundamental physics, to applications in two key technical areas - RF and power electronics Outlines fundamentals, reviews state-of-the-art circuits and applications, and introduces current and emerging technologies Written by a panel of academic and industry experts in each field
Download or read book Power GaN Devices written by Matteo Meneghini and published by Springer. This book was released on 2016-09-08 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the first comprehensive overview of the properties and fabrication methods of GaN-based power transistors, with contributions from the most active research groups in the field. It describes how gallium nitride has emerged as an excellent material for the fabrication of power transistors; thanks to the high energy gap, high breakdown field, and saturation velocity of GaN, these devices can reach breakdown voltages beyond the kV range, and very high switching frequencies, thus being suitable for application in power conversion systems. Based on GaN, switching-mode power converters with efficiency in excess of 99 % have been already demonstrated, thus clearing the way for massive adoption of GaN transistors in the power conversion market. This is expected to have important advantages at both the environmental and economic level, since power conversion losses account for 10 % of global electricity consumption. The first part of the book describes the properties and advantages of gallium nitride compared to conventional semiconductor materials. The second part of the book describes the techniques used for device fabrication, and the methods for GaN-on-Silicon mass production. Specific attention is paid to the three most advanced device structures: lateral transistors, vertical power devices, and nanowire-based HEMTs. Other relevant topics covered by the book are the strategies for normally-off operation, and the problems related to device reliability. The last chapter reviews the switching characteristics of GaN HEMTs based on a systems level approach. This book is a unique reference for people working in the materials, device and power electronics fields; it provides interdisciplinary information on material growth, device fabrication, reliability issues and circuit-level switching investigation.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2006 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Atomic Layer Deposition for Semiconductors written by Cheol Seong Hwang and published by Springer Science & Business Media. This book was released on 2013-10-18 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering thorough coverage of atomic layer deposition (ALD), this book moves from basic chemistry of ALD and modeling of processes to examine ALD in memory, logic devices and machines. Reviews history, operating principles and ALD processes for each device.
