Download or read book Innovations in Energy Power and Thermal Engineering written by Muthukumar Palanisamy and published by Springer Nature. This book was released on 2021-10-08 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the select proceedings of International Conference on Innovations in Thermo-Fluid Engineering and Sciences (ICITFES 2020). It covers the theoretical and experimental research works carried out in the field of energy and power engineering. Various topics covered include fluid mechanics, gas turbines and dynamics, heat transfer, humidity and control, multiphase flow, ocean engineering, power and energy, refrigeration and air conditioning, renewable energy, and thermodynamics. The book will be helpful for the researchers, scientists, and professionals working in the field of energy, power engineering, and thermal engineering.
Download or read book Innovations in Sustainable Energy and Technology written by P. Muthukumar and published by Springer Nature. This book was released on 2021-05-13 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents best selected research papers presented at Innovation in Sustainable Energy and Technology India (ISET 2020), organized by Energy Institute Bangalore (A unit of RGIPT, an Institute of National Importance), India, during 3–4 December 2020. The book covers various topics of sustainable energy and technologies which includes renewable energy (solar photovoltaic, solar thermal and CSP, biomass, wind energy, micro hydro power, hydrogen energy, geothermal energy, energy materials, energy storage, hybrid energy), smart energy systems (electrical vehicle, cybersecurity, charging infrastructures, IOT & AI, waste management, PHEV (CNG/EV) and mobility (smart grids, IOT & AI, energy-efficient buildings, mart agriculture).
Download or read book Energy Technology Innovation written by Arnulf Grubler and published by Cambridge University Press. This book was released on 2014 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: An edited volume on factors determining success or failure of energy technology innovation, for researchers and policy makers.
Download or read book The Power of Design written by Angèle H. Reinders and published by John Wiley & Sons. This book was released on 2012-11-28 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Power of Design offers an introduction and a practical guide to product innovation, integrating the key topics that are necessary for the design of sustainable and energy-efficient products using sustainable energy technologies. Product innovation in sustainable energy technologies is an interdisciplinary field. In response to its growing importance and the need for an integrated view on the development of solutions, this text addresses the functional principles of various energy technologies next to the latest design processes and innovation methods. From the perspective of product applications, the book provides clear explanations of technologies that are significant for product integration, such as batteries, photovoltaic solar energy, fuel cells, small wind turbines, human power, energy saving lighting, thermal energy technologies in buildings, and piezoelectric energy conversions. The design processes and innovation methods presented in this book include various approaches ranging from technical, societal and creative methods that can be applied in different stages of the design process. Other features include: a methodological approach, enabling readers to easily apply the theory to their research projects and to the actual design of sustainable products with energy technologies discussion on interaction design and smart grid interventions colour photographs that illustrate the final products numerous case studies of product development projects and concepts in practice, enabling readers to understand and design energy-efficient products in several different markets a companion website containing useful information about the cases and an additional design cases with sustainable energy technologies The Power of Design provides a comprehensive and visually-appealing opening into the subject for third and fourth year students, postgraduates, and professionals in the areas of energy, environment, product design and engineering
Download or read book Hybrid Poly generation Energy Systems written by Mehdi Mehrpooya and published by Elsevier. This book was released on 2023-09-21 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hybrid Poly-generation Energy Systems: Thermal Design and Exergy Analysis provides an analysis of the latest technologies and concepts of hybrid energy systems, focusing on thermal applications. The book guides readers through an introduction to hybrid poly-generation systems and the storage options available before working through the types of hybrid systems, including solar, fuel cells, combustion, and heating and cooling. An analysis of the economic and environmental impact of each system is included, as well as methods and approaches for exergy and energy improvement analysis. This book can be used as a tool for understanding new concepts in this emerging field and as a reference for researchers and professionals working on the integrated cogeneration of power systems. Guides the reader through hybrid processes they can apply to their own system designs Explains operational processes and includes multiple examples of optimization techniques Includes renewable energy sources, CO2 capturing processes in combined systems and advanced exergy analysis methods
Download or read book Thermal Engineering written by Eric Hu and published by . This book was released on 2018-06 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: New energy power generation is crucial technology of current developing electricity generation. Due to fossil fuel is finite and unfriendly to environment while applying it as energy source; it is unsatisfactory with strategy of sustainable development. New energy power generation has had a great progress in photovoltaic generation and wind power generation. In the new energy generation technology, thermal energy can be transformed to electricity with combination of BIPV and thermal energy storage technology. Thermal energy storage in general, and phase change materials (PCMs) in particular, have been a main topic in research for the last 20 years, but although the information is quantitatively enormous, it is also spread widely in the literature, and difficult to find.Thermal Engineering offers a broad review of recent global developments in an application of thermal and thermochemical processing to modify the microstructure and properties of a wide range of engineering materials. It analyzes the current state and perspectives of energy development, design and operation of power engineering equipment such as that at thermal and nuclear power stations, energy conservation and pollution control, the theoretical fundamentals of heat engineering, and non-traditional heat sources. Applied novel research about the development and demonstration of components, equipment, technologies and systems involving thermal processes for the production, storage, utilization, and conservation of energy are also explored.This book will appeal to students, researchers, research scholars, teachers, authors and other professionals in the field of research in Thermal Engineering subjects.
Download or read book Renewable Energy Sources Engineering Technology Innovation written by Marek Wróbel and published by Springer. This book was released on 2019-07-16 with total page 1094 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents peer-reviewed papers based on the oral and poster presentations during the 5th International Conference on Renewable Energy Sources, which was held from June 20 to 22, 2018 in Krynica, Poland. The scope of the conference included a wide range of topics in renewable energy technology, with a major focus on biomass, solar energy and geothermal energy, but also extending to heat pumps, fuel cells, wind energy, energy storage, and the modelling and optimization of renewable energy systems. This edition of the conference had a special focus on the role of renewable energy in the reduction of air pollution in the Eastern European region. Traditionally this conference is a unique occasion for gathering Polish and international researchers’ perspectives on renewable energy sources, and furthermore of balancing them against governmental policy considerations. Accordingly, the conference offered also panels to discuss best practices and solutions with local entrepreneurs and federal government bodies. The meeting attracts not only scientist but also industry representatives as well as local and federal government personnel. In 2018, the conference was organized by the University of Agriculture in Krakow in cooperation with AGH University of Science and Technology (Krakow), University of Žilina, Silesian University of Technology, International Commission of Agricultural and Biosystems Engineering (CIGR) and Polish Society of Agricultural Engineering. Honorary auspices were given by the Ministry of Science and Higher Education Republic of Poland, Rector of the University of Agriculture in Krakow and Rector of the AGH University of Science and Technology.
Download or read book Power Generation Technologies for Low Temperature and Distributed Heat written by Christos N. Markides and published by Woodhead Publishing. This book was released on 2023-06-13 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Generation Technologies for Low-Temperature and Distributed Heat presents a systematic and detailed analysis of a wide range of power generation systems for low-temperature (lower than 700-800°C) and distributed heat recovery applications. Each technology presented is reviewed by a well-known specialist to provide the reader with an accurate, insightful and up-to-date understanding of the latest research and knowledge in the field. Technologies are introduced before the fundamental concepts and theoretical technical and economic aspects are discussed, as well as the practical performance expectations. Cutting-edge technical progress, key applications, markets, as well as emerging and future trends are also provided, presenting a multifaceted and complete view of the most suitable technologies. A chapter on various options for thermal and electrical energy storage is also included with practical examples, making this a valuable resource for engineers, researchers, policymakers and engineering students in the fields of thermal energy, distributed power generation systems and renewable and clean energy technology systems. Presents a wide range of power generation technologies based on thermomechanical cycles, membrane technology, thermochemical, thermoelectric, photoelectric and electrochemical effects Explains the fundamental concepts and underlying operation principles in each case, and provides theoretical performance expectations and practical technical and economic characteristics Reviews the cutting-edge technical progress, key applications, markets, emerging and future trends, and includes practical examples of all technologies Details advantages and disadvantages of each technology to allow the reader to make informed decisions of their own for different applications
Download or read book Advanced Energy Efficiency Technologies for Solar Heating Cooling and Power Generation written by Xudong Zhao and published by . This book was released on 2019 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, based on the research experience and outcomes of a group of international contributors, addresses a range of advanced energy efficiency technologies and their applications in solar heating, cooling and power generation, while also providing solutions for tackling recurring low efficiency problems in today's systems. It highlights the latest technologies and methods, which can significantly improve the performance of solar systems, enabling readers to design, construct and apply high-performance solar systems in or for their own projects. The contributors provide a systematic introduction to state-of-the-art energy efficiency technologies that demonstrates how to implement innovative solar systems. These technologies include: " heat pipes and loop heat pipes; " phase change materials (PCMs) and PCM slurries; " micro-channel panels; " desiccant/adsorption cycling; " ejector cooling and heat pumps; and " solar concentration and thermoelectric units. The book shows how innovative solar systems applicable to rural and urban buildings can be analysed and demonstrates the successful implementation of these advanced technologies. It delivers the design principles and associated energy performance assessment methods for a range of selected solar heating, cooling and power generation projects. This book offers a valuable source of information for final-year undergraduate students, as well as graduate students and academic lecturers, as it promotes the widespread deployment of advanced solar heating, cooling and power generation technologies applicable for buildings across the globe. The book is also a good point of reference for design engineers and energy consultants who wish to extend their knowledge of advanced technologies used to achieve energy efficiency.
Download or read book Polygeneration Systems written by Francesco Calise and published by Academic Press. This book was released on 2021-09-22 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: The support for polygeneration lies in the possibility of integrating different technologies into a single energy system, to maximize the utilization of both fossil and renewable fuels. A system that delivers multiple forms of energy to users, maximizing the overall efficiency makes polygeneration an emerging and viable option for energy consuming industries. Polygeneration Systems: Design, Processes and Technologies provides simple and advanced calculation techniques to evaluate energy, environmental and economic performance of polygeneration systems under analysis. With specific design guidelines for each type of polygeneration system and experimental performance data, referred both to single components and overall systems, this title covers all aspects of polygeneration from design to operation, optimization and practical implementation. Giving different aspects of both fossil and non-fossil fuel based polygeneration and the wider area of polygeneration processes, this book helps readers learn general principles to specific system design and development through analysis of case studies, examples, simulation characteristics and thermodynamic and economic data. Detailed economic data for technology to assist developing feasibility studies regarding the possible application of polygeneration technologies Offers a comprehensive list of all current numerical and experimental results of polygeneration available Includes simulation models, cost figures, demonstration projects and test standards for designers and researchers to validate their own models and/or to test the reliability of their results
Download or read book Energy Systems written by Leon Liebenberg and published by John Wiley & Sons. This book was released on 2024-04-09 with total page 725 pages. Available in PDF, EPUB and Kindle. Book excerpt: ENERGY SYSTEMS Reimagine the future of energy production and use with this innovative and state-of-the-art guide This multidisciplinary and comprehensive text features an up-to-date summary of salient energy technologies for quick reference by students and practitioners of energy engineering. Uniquely, the book employs a guided self-study approach with theory provided in “bite-sized” chunks, several worked examples, quantitative and qualitative practice problems, 10 real-world mini-projects, and interviews with young energy innovators and engineering students. The book poses many big and pressing questions, asking the reader to “reimagine our future,” particularly with a focus on sustainable energy. These questions are aligned with characteristics of an entrepreneurial mindset, which are emphasized throughout the book. The book reviews the fundamentals of thermodynamics, fluid mechanics, and quantum mechanics. Chapters explore the full range of energy conversion technologies, including energy supply and demand, the science of global warming, interpretations of sustainability, chemical fuels, carbon capture and storage, internal and external combustion engines, vapor power and refrigeration plants, nuclear power, solar-electricity, solar-heat, fuel cells, wind energy, water energy, and energy storage. The book ends with a brief investigation into what we can do to decarbonize the transportation, industry, buildings, and electric power sectors. Energy Systems: A Project-Based Approach to Sustainability Thinking for Energy Conversion Systems offers an accessible overview of this important subject with an innovative, easy-to-use organization. Built to facilitate active learning and representing the latest research and industrial practice, Energy Systems provides readers with tools and information to evaluate energy systems and to reimagine potential energy solutions. Readers of Energy Systems will also find: Organization designed to blend seamlessly with a 14-week course schedule A balance of robust theoretical and industry-related knowledge and real-world examples throughout Teaching resources including mini-projects, practice problems, remedial appendices, and online study notes Energy Systems is ideal for students and instructors in courses relating to Energy Conversion Systems, Energy Science, Sustainable/Renewable Energy, and the interrelated Social, Technological, Economic, Environmental, and Political aspects. The book will also appeal to practitioners of energy engineering via the numerous state-of-the-art summaries and real-world problems.
Download or read book Innovative Heat Exchangers written by Hans-Jörg Bart and published by Springer. This book was released on 2017-12-30 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: This accessible book presents unconventional technologies in heat exchanger design that have the capacity to provide solutions to major concerns within the process and power-generating industries. Demonstrating the advantages and limits of these innovative heat exchangers, it also discusses micro- and nanostructure surfaces and micro-scale equipment, and introduces pillow-plate, helical and expanded metal baffle concepts. It offers step-by-step worked examples, which provide instructions for developing an initial configuration and are supported by clear, detailed drawings and pictures. Various types of heat exchangers are available, and they are widely used in all fields of industry for cooling or heating purposes, including in combustion engines. The market in 2012 was estimated to be U$ 42.7 billion and the global demand for heat exchangers is experiencing an annual growth of about 7.8 %. The market value is expected to reach U$ 57.9 billion in 2016, and approach U$ 78.16 billion in 2020. Providing a valuable introduction to students and researchers, this book offers clear and concise information to thermal engineers, mechanical engineers, process engineers and heat exchanger specialists.
Download or read book Energy for Sustainable Development written by Md Hasanuzzaman and published by Academic Press. This book was released on 2019-10-30 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy for Sustainable Development: Demand, Supply, Conversion and Management presents a comprehensive look at recent developments and provides guidance on energy demand, supply, analysis and forecasting of modern energy technologies for sustainable energy conversion. The book analyzes energy management techniques and the economic and environmental impact of energy usage and storage. Including modern theories and the latest technologies used in the conversion of energy for traditional fossil fuels and renewable energy sources, this book provides a valuable reference on recent innovations. Researchers, engineers and policymakers will find this book to be a comprehensive guide on modern theories and technologies for sustainable development. Uniquely covers Energy Demand, Supply, Conversion and Management in one complete reference Offers relevant information for both undergraduate and postgraduate programs on energy conversion, making it a key reference for study Includes extensive coverage that links energy conversion with efficiency and management through storage, savings, economics and environmental impact
Download or read book High Temperature Thermal Storage Systems Using Phase Change Materials written by Luisa F. Cabeza and published by Academic Press. This book was released on 2017-11-27 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-Temperature Thermal Storage Systems Using Phase Change Materials offers an overview of several high-temperature phase change material (PCM) thermal storage systems concepts, developed by several well-known global institutions with increasing interest in high temperature PCM applications such as solar cooling, waste heat and concentrated solar power (CSP). The book is uniquely arranged by concepts rather than categories, and includes advanced topics such as thermal storage material packaging, arrangement of flow bed, analysis of flow and heat transfer in the flow bed, energy storage analysis, storage volume sizing and applications in different temperature ranges. By comparing the varying approaches and results of different research centers and offering state-of-the-art concepts, the authors share new and advanced knowledge from researchers all over the world. This reference will be useful for researchers and academia interested in the concepts and applications and different techniques involved in high temperature PCM thermal storage systems. Offers coverage of several high temperature PCM thermal storage systems concepts developed by several leading research institutions Provides new and advanced knowledge from researchers all over the world Includes a base of material properties throughout
Download or read book Sustainable Energy Systems Innovative Perspectives written by Anton Sinitsyn and published by Springer Nature. This book was released on 2021-02-04 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the latest advances, innovations, and applications in the field of sustainable energy systems, as presented by researchers and engineers at the International Conference Sustainable Energy Systems: Innovative Perspectives (SES), held in Saint-Petersburg, Russia, on October 29-30, 2020. It covers highly diverse topics, including applications of renewable energy sources, recycling of solid municipal and industrial waste, circular economy based on agricultural waste, energy-efficient and sustainable buildings, innovation management and technologies of sustainable cities, sustainable construction, creative construction technology and materials, construction simulation and virtual construction, BIM and rapid prototyping for construction, consumption practices in the digital era, sustainable operations management, and supply chain management in the digital era. The contributions, which were selected by means of a rigorous international peer-review process, highlight numerous exciting ideas that will spur novel research directions and foster multidisciplinary collaborations.
Download or read book Thermal Energy Systems written by Ashwani Kumar and published by CRC Press. This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The text provides in-depth knowledge about recent advances in solar collector systems, photovoltaic systems, the role of thermal energy systems in buildings, phase change materials, geothermal energy, biofuels, and thermal management systems for EVs in social and industrial applications. It further aims toward the inclusion of innovation and implementation of strategies for CO2emission reduction through the reduction of energy consumption using conventional sources. This book: Presents the latest advances in the field of thermal energy storage, solar energy development, geothermal energy, and hybrid energy applications for green development Highlights the importance of innovation and implementation of strategies for CO2 emission reduction through the reduction of energy consumption using sustainable technologies and methods Discusses design development, life cycle assessment, modelling and simulation of thermal energy systems in detail Synergize exploration related to the various properties and functionalities through extensive theoretical and numerical modelling present in the energy sector Explores opportunities, challenges, future perspectives and approaches toward gaining sustainability through renewable energy resources The text discusses the fundamentals of thermal energy and its applications in a comprehensive manner. It further covers advancements in solar thermal and photovoltaic systems. The text highlights the contribution of geothermal energy conversion systems to sustainable development. It showcases the design and optimization of ground source heat pumps for space conditioning and presents modelling and simulation of the thermal energy systems for design optimization. It will serve as an ideal reference text for senior undergraduate, graduate students and academic researchers in the fields of mechanical engineering, environmental engineering and energy engineering.
Download or read book Renewable Energy written by Tolga Taner and published by BoD – Books on Demand. This book was released on 2021-02 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses renewable energy resources and systems as well as energy efficiency. It contains twenty-three chapters over six sections that address a multitude of renewable energy types, including solar and photovoltaic, biomass, hydroelectric, and geothermal. The information presented herein is a scientific contribution to energy and environmental regulations, quality and efficiency of energy services, energy supply security, energy market-based approaches, government interventions, and the spread of technological innovation.