Download or read book Computer Modeling for Injection Molding written by Huamin Zhou and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a wide range of applications and uses of simulation and modeling techniques in polymer injection molding, filling a noticeable gap in the literature of design, manufacturing, and the use of plastics injection molding. The authors help readers solve problems in the advanced control, simulation, monitoring, and optimization of injection molding processes. The book provides a tool for researchers and engineers to calculate the mold filling, optimization of processing control, and quality estimation before prototype molding.

Download or read book Intelligent Optimization of Mold Design and Process Parameters in Injection Molding written by Mehdi Moayyedian and published by Springer. This book was released on 2018-11-02 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes an effective framework for setting the right process parameters and new mold design to reduce the current plastic defects in injection molding. It presents a new approach for the optimization of injection molding process via (i) a new mold runner design which leads to 20 percent reduction in scrap rate, 2.5 percent reduction in manufacturing time, and easier ejection of injected part, (ii) a new mold gate design which leads to less plastic defects; and (iii) the introduction of a number of promising alternatives with high moldability indices. Besides presenting important developments of relevance academic research, the book also includes useful information for people working in the injection molding industry, especially in the green manufacturing field.

Download or read book Injection Molding Process Modelling written by Tien-Chien Jen and published by CRC Press. This book was released on 2024-09-11 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: Injection Molding Process Modelling presents the application of CAE, statistics and AI in defect identification, control, and optimization of injection molding process for quality production. It showcases CAE in determining the optimal placement of injection points, designing cooling channels, and ensuring that the mold will produce parts with the desired specifications. The book illustrates the capability of the CAE tools to simulate molten plastic flow within a mold during the injection molding process. Explaining how the use of CAE, statistical tools and AI enhances efficiency, accuracy, and collaboration, the book explores the contributions to injection molding in product design and visualization; prototyping and testing; mold design; and analysis and simulation. It emphasizes the integration of statistical tools for optimized efficiency and waste reduction, including statistical process control (SPC), Design of Experiments (DOE), Regression Analysis, Capability Indices, Interaction effects, and many more. The book also illustrates the predictive modelling of typical injection molded product defects using intelligent algorithms. The book will interest industry professionals and engineers working in manufacturing, production, automation, and quality control.

Download or read book Injection Molding Handbook written by D.V. Rosato and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1484 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third edition has been written to thoroughly update the coverage of injection molding in the World of Plastics. There have been changes, including extensive additions, to over 50% of the content of the second edition. Many examples are provided of processing different plastics and relating the results to critiCal factors, which range from product design to meeting performance requirements to reducing costs to zero-defect targets. Changes have not been made that concern what is basic to injection molding. However, more basic information has been added concerning present and future developments, resulting in the book being more useful for a long time to come. Detailed explanations and interpretation of individual subjects (more than 1500) are provided, using a total of 914 figures and 209 tables. Throughout the book there is extensive information on problems and solutions as well as extensive cross referencing on its many different subjects. This book represents the ENCYCLOPEDIA on IM, as is evident from its extensive and detailed text that follows from its lengthy Table of CONTENTS and INDEX with over 5200 entries. The worldwide industry encompasses many hundreds of useful plastic-related computer programs. This book lists these programs (ranging from operational training to product design to molding to marketing) and explains them briefly, but no program or series of programs can provide the details obtained and the extent of information contained in this single sourcebook.

Download or read book Injection Molding written by Rong Zheng and published by Springer Science & Business Media. This book was released on 2011-06-21 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers fundamental principles and numerical methods relevant to the modeling of the injection molding process. As injection molding processing is related to rheology, mechanical and chemical engineering, polymer science and computational methods, and is a rapidly growing field, the book provides a multidisciplinary and comprehensive introduction to the subjects required for an understanding of the complex process. It addresses the up-to-date status of fundamental understanding and simulation technologies, without losing sight of still useful classical approaches. The main chapters of the book are devoted to the currently active fields of flow-induced crystallization and orientation evolution of fiber suspensions, respectively, followed by detailed discussion of their effects on mechanical property, shrinkage and warpage of injection-molded products. The level of the proposed book will be suitable for interested scientists, R&D engineers, application engineers, and graduate students in engineering.

Download or read book Materials Forming Machining and Post Processing written by Kapil Gupta and published by Springer. This book was released on 2019-06-27 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a detailed understanding of various forming, machining, and post processing techniques. Working principle, process mechanism, salient features and latest developments are primarily focused. It presents some basic and specialized processes to produce quality engineered parts. This book also incorporates some investigations on modelling, simulation and optimization of the aforementioned processes to improve quality and performance, productivity, and sustainability.

Download or read book Molding Simulation Theory and Practice written by Maw-Ling Wang and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2018-06-11 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical introductory guide to injection molding simulation is aimed at both practicing engineers and students. It will help the reader to innovate and improve part design and molding processes, essential for efficient manufacturing. A user-friendly, case-study-based approach is applied, enhanced by many illustrations in full color. The book is conceptually divided into three parts: Chapters 1–5 introduce the fundamentals of injection molding, focusing the factors governing molding quality and how molding simulation methodology is developed. As they are essential to molding quality, the rheological, thermodynamic, thermal, mechanical, kinetic properties of plastics are fully elaborated in this part, as well as curing kinetics for thermoset plastics. Chapters 6–11 introduce CAE verification of design, a valuable tool for both part and mold designers toward avoiding molding problems in the design stage and to solve issues encountered in injection molding. This part covers design guidelines of part, gating, runner, and cooling channel systems. Temperature control in hot runner systems, prediction and control of warpage, and fiber orientation are also discussed. Chapters 12–17 introduce research and development in innovative molding, illustrating how CAE is applied to advanced molding techniques, including co-/bi-Injection molding, gas-/water-assisted injection molding, foam injection molding, powder injection molding, resin transfer molding, and integrated circuit packaging. The authors come from the creative simulation team at CoreTech System (Moldex3D), winner of the PPS James L. White Innovation Award 2015. Several CAE case study exercises for execution in the Moldex3D software are included to allow readers to practice what they have learned and test their understanding.

Download or read book Handbook of Metal Injection Molding written by Donald F Heaney and published by Woodhead Publishing. This book was released on 2018-11-01 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal injection molding combines the most useful characteristics of powder metallurgy and plastic injection molding to facilitate the production of small, complex-shaped metal components with outstanding mechanical properties. Handbook of Metal Injection Molding, Second Edition provides an authoritative guide to this important technology and its applications. Building upon the success of the first edition, this new edition includes the latest developments in the field and expands upon specific processing technologies. Part one discusses the fundamentals of the metal injection molding process with chapters on topics such as component design, important powder characteristics, compound manufacture, tooling design, molding optimization, debinding, and sintering. Part two provides a detailed review of quality issues, including feedstock characterisation, modeling and simulation, methods to qualify a MIM process, common defects and carbon content control. Special metal injection molding processes are the focus of part three, which provides comprehensive coverage of micro components, two material/two color structures, and porous metal techniques, as well as automation of the MIM process and metal injection molding of large components. Finally, part four explores metal injection molding of particular materials, and has been expanded to include super alloys, carbon steels, precious metals, and aluminum. With its distinguished editor and expert team of international contributors, the Handbook of Metal Injection Molding is an essential guide for all those involved in the high-volume manufacture of small precision parts, across a wide range of high-tech industries such as microelectronics, biomedical and aerospace engineering. Provides an authoritative guide to metal injection molding and its applications Discusses the fundamentals of the metal injection molding processes and covers topics such as component design, important powder characteristics, compound manufacture, tooling design, molding optimization, debinding, and sintering Comprehensively examines quality issues such as feedstock characterization, modeling and simulation, common defects and carbon content control

Download or read book Numerical Modelling and Optimization in Advanced Manufacturing Processes written by Chander Prakash and published by Springer Nature. This book was released on 2022-05-26 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents different numerical modeling and nature-inspired optimization methods in advanced manufacturing processes for understanding the process characteristics. Particular emphasis is devoted to applications in non-conventional machining, nano-finishing, precision casting, porous biofabrication, three-dimensional printing, and micro-/nanoscale modeling. The book includes practical implications of empirical, analytical, and numerical models for predicting the vital output responses. Especial attention is given to finite element methods (FEMs) for understanding the design of novel highly complex engineering products, their performances, and behaviors under simulated processing conditions.

Download or read book International Conference on Emerging Trends in Engineering ICETE written by Suresh Chandra Satapathy and published by Springer. This book was released on 2020-08-14 with total page 783 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the First International Conference on Emerging Trends in Engineering (ICETE), held at University College of Engineering and organised by the Alumni Association, University College of Engineering, Osmania University, in Hyderabad, India on 22–23 March 2019. The proceedings of the ICETE are published in three volumes, covering seven areas: Biomedical, Civil, Computer Science, Electrical & Electronics, Electronics & Communication, Mechanical, and Mining Engineering. The 215 peer-reviewed papers from around the globe present the latest state-of-the-art research, and are useful to postgraduate students, researchers, academics and industry engineers working in the respective fields. This volume presents state-of-the-art, technical contributions in the areas of civil, mechanical and mining engineering, discussing sustainable developments in fields such as water resource engineering, structural engineering, geotechnical and transportation engineering, mining engineering, production and industrial engineering, thermal engineering, design engineering, and production engineering.

Download or read book System Modeling and Optimization written by F. Ceragioli and published by Springer. This book was released on 2006-06-07 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected proceedings from the 22nd biennial IFIP conference on System Modeling and Optimization, held in Turin, Italy in July of 2005. This edition of the conference is dedicated to the achievements of Camillo Possio, who was killed sixty years ago during the last air raid over Turin. For more information about the 300 other books in the IFIP series, please visit www.springeronline.com.

Download or read book Process Modelling and Simulation written by César de Prada and published by MDPI. This book was released on 2019-09-23 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since process models are nowadays ubiquitous in many applications, the challenges and alternatives related to their development, validation, and efficient use have become more apparent. In addition, the massive amounts of both offline and online data available today open the door for new applications and solutions. However, transforming data into useful models and information in the context of the process industry or of bio-systems requires specific approaches and considerations such as new modelling methodologies incorporating the complex, stochastic, hybrid and distributed nature of many processes in particular. The same can be said about the tools and software environments used to describe, code, and solve such models for their further exploitation. Going well beyond mere simulation tools, these advanced tools offer a software suite built around the models, facilitating tasks such as experiment design, parameter estimation, model initialization, validation, analysis, size reduction, discretization, optimization, distributed computation, co-simulation, etc. This Special Issue collects novel developments in these topics in order to address the challenges brought by the use of models in their different facets, and to reflect state of the art developments in methods, tools and industrial applications.

Download or read book Injection Molding written by Musa R. Kamal and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2012-11-12 with total page 953 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book attempts to survey the state of the science and technology of the injection molding process. It represents a comprehensive, balanced mix of practical and theoretical aspects for a wide range of injection molding applications. The authors of the 21 chapters are experts and leaders in their respective areas of specialization in the injection molding field. While it is not possible to cover all aspects of such a dynamic growing field, we hope that the reader will find sufficient information and background to become acquainted, at various levels of depth, with key components of the science and technology of injection molding. Contents: Injection Molding: Introduction and General Background Injection Molding Machines, Tools, and Processes The Plasticating System for Injection Molding Machines Non-Conventional Injection Molds Gas Assisted Injection Molding Water Injection Techniques (WIT) Flow Induced Fiber Micro-Structure in Injection Molding of Fiber Reinforced Materials Injection Foam Molding Powder Metal Injection Molding Micro Injection Molding Internal Visualization of Mold Cavity and Heating Cylinder Injection Molding Control Optimal Design for Injection Molding Development of Injection Molding Simulation Three-Dimensional Injection Molding Simulation Viscoelastic Instabilities in Injection Molding Evolution of Structural Hierarchy in Injection Molded Semicrystalline Polymers Modeling Aspects of Post-Filling Steps in Injection Molding Volumetric and Anisotropic Shrinkage in Injection Moldings of Thermoplastics Three-Dimensional Simulation of Gas-Assisted and Co-Injection Molding Processes Co-Injection Molding of Polymers

Download or read book Advanced Modeling and Optimization of Manufacturing Processes written by R. Venkata Rao and published by Springer Science & Business Media. This book was released on 2010-12-01 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Modeling and Optimization of Manufacturing Processes presents a comprehensive review of the latest international research and development trends in the modeling and optimization of manufacturing processes, with a focus on machining. It uses examples of various manufacturing processes to demonstrate advanced modeling and optimization techniques. Both basic and advanced concepts are presented for various manufacturing processes, mathematical models, traditional and non-traditional optimization techniques, and real case studies. The results of the application of the proposed methods are also covered and the book highlights the most useful modeling and optimization strategies for achieving best process performance. In addition to covering the advanced modeling, optimization and environmental aspects of machining processes, Advanced Modeling and Optimization of Manufacturing Processes also covers the latest technological advances, including rapid prototyping and tooling, micromachining, and nano-finishing. Advanced Modeling and Optimization of Manufacturing Processes is written for designers and manufacturing engineers who are responsible for the technical aspects of product realization, as it presents new models and optimization techniques to make their work easier, more efficient, and more effective. It is also a useful text for practitioners, researchers, and advanced students in mechanical, industrial, and manufacturing engineering.

Download or read book Smart Applications and Data Analysis written by Mohamed Hamlich and published by Springer Nature. This book was released on 2023-01-01 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 4th International Conference on Smart Applications and Data Analysis, SADASC 2022, held in Marrakesh, Morocco,during September 22–24, 2022. The 24 full papers and 11 short papers included in this book were carefully reviewed andselected from 64 submissions. They were organized in topical sections as follows: AI-Driven Methods 1; Networking technologies & IoT; AI-Driven Methods 2; Green Energy, Computing and Technologies 1; AI-Driven Methods 3; Green Energy, Computing and Technologies 2; Case studies and Cyber-Physical Systems 1; Case studies and Cyber-Physical Systems 2; and Case studies and Cyber-Physical Systems 3.

Download or read book Design of Experiments for Chemical Pharmaceutical Food and Industrial Applications written by Carrillo-Cedillo, Eugenia Gabriela and published by IGI Global. This book was released on 2019-12-13 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: Statistics is a key characteristic that assists a wide variety of professions including business, government, and factual sciences. Companies need data calculation to make informed decisions that help maintain their relevance. Design of experiments (DOE) is a set of active techniques that provides a more efficient approach for industries to test their processes and form effective conclusions. Experimental design can be implemented into multiple professions, and it is a necessity to promote applicable research on this up-and-coming method. Design of Experiments for Chemical, Pharmaceutical, Food, and Industrial Applications is a pivotal reference source that seeks to increase the use of design of experiments to optimize and improve analytical methods and productive processes in order to use less resources and time. While highlighting topics such as multivariate methods, factorial experiments, and pharmaceutical research, this publication is ideally designed for industrial designers, research scientists, chemical engineers, managers, academicians, and students seeking current research on advanced and multivariate statistics.

Download or read book Total Quality Process Control for Injection Molding written by M. Joseph Gordon, Jr. and published by John Wiley & Sons. This book was released on 2010-03-25 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: The all-encompassing guide to total quality process control for injection molding In the same simple, easy-to-understand language that marked the first edition, Total Quality Process Control for Injection Molding, Second Edition lays out a successful plan for producing superior plastic parts using high-quality controls. This updated edition is the first of its kind to zero in on every phase of the injection molding process, the most commonly used plastics manufacturing method, with an all-inclusive strategy for excellence. Beginning with sales and marketing, then moving forward to cover finance, purchasing, design, tooling, manufacturing, assembly, decorating, and shipping, the book thoroughly covers each stage to illustrate how elevated standards across individual departments relate to result in the creation of a top-notch product. This Second Edition: Details ways to improve plastic part design and quality Includes material and process control procedures to monitor quality through the entire manufacturing system Offers detailed information on machinery and equipment and the implementation of quality assurance methods—content that is lacking in similar books Provides problem-analysis techniques and troubleshooting procedures Includes updates that cover Six Sigma, ISO 9000, and TS 16949, which are all critical for quality control; computer-guided process control techniques; and lean manufacturing methods With proven ways to problem-solve, increase performance, and ensure customer satis-faction, this valuable guide offers the vital information today's managers need to plan and implement quality process control—and produce plastic parts that not only meet, but surpass expectations.