Download or read book Injection Molding Troubleshooting Guide 3rd Ed written by Jay W. Carender and published by Createspace Independent Publishing Platform. This book was released on 2011-11-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IM Troubleshooting Guide was originally prepared in 1996 as a 48 page convenient pocket sized resource for use in Injection Molding. This information is most useful by personnel who work in the injection molding field including press operators, technicians, engineers, etc. This 3rd ED is at 104 pages and includes selected extra pages from other APEBOOKS that are helpful in process set up and troubleshooting.This book includes many useful definitions and tips for troubleshooting molding problems -- both process and tooling related. The book was written based on many years of process engineering. The solutions for correcting process problems are listed in the best order to solve the problem based on factors such as ease & timeliness to perform versus cost to implement and always considering effectiveness to solve problem. It is also useful to identify a common set of definitions for each department to use when discussing these common molding defects. Tips are often provided as to which defects may be process correctable versus those requiring product or mold changes.An introduction to DOE and dimensional nominalization is made, but discussed in greater detail in some of the other booklets written by this author for injection molding ... these are listed later in this book ... a total of six books have been written for injection molding.
Download or read book Injection Molding Advanced Troubleshooting Guide written by Randy Kerkstra and published by . This book was released on 2021-04-09 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: This highly practical troubleshooting guide solves problems at the machine systematically and quickly. Drawing on a wealth of hands-on experience from the authors, who have built strong reputations in the field, the book is structured by type of problem/solution. Thus, it is an ideal reference to be consulted at the machine. Included is valuable information on robust process windows, cycle time evaluations, scrap savings, and runners/gates with no existing standard in the industry. No other book provides the unique insights found here.
Download or read book Injection Molding Handbook written by D.V. Rosato and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1484 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third edition has been written to thoroughly update the coverage of injection molding in the World of Plastics. There have been changes, including extensive additions, to over 50% of the content of the second edition. Many examples are provided of processing different plastics and relating the results to critiCal factors, which range from product design to meeting performance requirements to reducing costs to zero-defect targets. Changes have not been made that concern what is basic to injection molding. However, more basic information has been added concerning present and future developments, resulting in the book being more useful for a long time to come. Detailed explanations and interpretation of individual subjects (more than 1500) are provided, using a total of 914 figures and 209 tables. Throughout the book there is extensive information on problems and solutions as well as extensive cross referencing on its many different subjects. This book represents the ENCYCLOPEDIA on IM, as is evident from its extensive and detailed text that follows from its lengthy Table of CONTENTS and INDEX with over 5200 entries. The worldwide industry encompasses many hundreds of useful plastic-related computer programs. This book lists these programs (ranging from operational training to product design to molding to marketing) and explains them briefly, but no program or series of programs can provide the details obtained and the extent of information contained in this single sourcebook.
Download or read book Total Quality Process Control for Injection Molding written by M. Joseph Gordon, Jr. and published by John Wiley & Sons. This book was released on 2010-03-25 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: The all-encompassing guide to total quality process control for injection molding In the same simple, easy-to-understand language that marked the first edition, Total Quality Process Control for Injection Molding, Second Edition lays out a successful plan for producing superior plastic parts using high-quality controls. This updated edition is the first of its kind to zero in on every phase of the injection molding process, the most commonly used plastics manufacturing method, with an all-inclusive strategy for excellence. Beginning with sales and marketing, then moving forward to cover finance, purchasing, design, tooling, manufacturing, assembly, decorating, and shipping, the book thoroughly covers each stage to illustrate how elevated standards across individual departments relate to result in the creation of a top-notch product. This Second Edition: Details ways to improve plastic part design and quality Includes material and process control procedures to monitor quality through the entire manufacturing system Offers detailed information on machinery and equipment and the implementation of quality assurance methods—content that is lacking in similar books Provides problem-analysis techniques and troubleshooting procedures Includes updates that cover Six Sigma, ISO 9000, and TS 16949, which are all critical for quality control; computer-guided process control techniques; and lean manufacturing methods With proven ways to problem-solve, increase performance, and ensure customer satis-faction, this valuable guide offers the vital information today's managers need to plan and implement quality process control—and produce plastic parts that not only meet, but surpass expectations.
Download or read book Injection Molding Reference Guide 4th Edition written by Jay Carender and published by Createspace Independent Publishing Platform. This book was released on 2011-10-13 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference guide was originally prepared in 1990 as a convenient pocket sized resource for use in Injection Molding. This information is most useful by personnel who work in the injection molding field including press operators, technicians, engineers, designers, mold builders, etc.There are many reference data tables regarding plastics data, statistical methods, engineering calculations and valuable training for personnel in the IM industry. The book includes basic part design, trig tables, calculations for thermal expansion, thermal exp coeffs, SHCS data, torque specs, shrink data, cooling time equation, mold debug guidelines, melt index data, resin density data, many tables of process guidelines, process development techniques, calculating heat load & water flow requirements, pipe data, conversion factors, transformer & motor current, PM & safety, basic statistics, equip selection guidelines and more.This 4th Edition has been reformatted at 5.5 inches wide x 8.5 inches tall in 2011 for print sales.
Download or read book Injection Mold Design Engineering written by David O. Kazmer and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2012-11-12 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a vision and structure to finally synergize all the engineering disciplines that converge in the mold design process. The topics are presented in a top-down manner, beginning with introductory definitions and the "big picture" before proceeding to layout and detailed design of molds. The book provides very pragmatic analysis with worked examples that can be readily adapted to "real world" mold design applications. It should help students and practitioners to understand the inner workings of injection molds and encourage them to think "outside the box" in developing innovative and highly functional mold designs. Contents: · Introduction to mold functions, types, and components · Review of design for injection molding · Cost estimation and optimization · Mold layout design including cavity layout, sizing, and materials selection · Cavity, runner system, and gating analysis and design · Cooling system analysis and design · Venting, shrinkage, and warpage analysis and strategies · Ejection force analysis and ejection system designs · Stress and deflection analysis with structural system designs · A survey of advanced mold designs
Download or read book Plastic Injection Molding written by Douglas M. Bryce and published by Sme. This book was released on 1997 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second book in the Plastic Injection Molding series addresses the basics and the fine points of plastics materials and product design phases of the thermoplastic injection molding process. Complex technical matter is presented in clear, sequential narrative bites.
Download or read book Basics of Troubleshooting in Plastics Processing written by Muralisrinivasan Natamai Subramanian and published by John Wiley & Sons. This book was released on 2011-04-20 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Basics of Troubleshooting in Plastics Processing is a condensed practical guide that gives the reader a broad introduction to properties of thermoplastics plastics, additives, the major processes (extrusion, injection molding, rotational molding, blow molding, and thermoforming), as well as troubleshooting. The main goal is to provide the plastics processor with an improved understanding of the basics by explaining the science behind the technology. Machine details are minimized as the emphasis is on processing problems and the defects in an effort to focus on basic root causes to problems and how to solve them. The book’s framework is troubleshooting in plastics processing because of the importance it has to the eventual production of high quality end products. Each chapter contains both practical and detailed technical information. This basic guide provides state-of-the-art information on: Processing problems and defects during manufacturing Plastics materials, their properties and characterization The plastics processing techniques Plastics additives Troubleshooting of the 5 main plastics processes References for further reading
Download or read book Handbook of Molded Part Shrinkage and Warpage written by Jerry Fischer and published by William Andrew. This book was released on 2012-12-31 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: How easy life would be if only moldings were the same size and shape as the mold. But they never are, as molders, toolmakers, designers and end users know only too well. Shrinkage means that the size is always different; warpage often changes the shape too. The effects are worse for some plastics than others. Why is that? What can you do about it? The Handbook of Molded Part Shrinkage and Warpage is the first and only book to deal specifically with this fundamental problem. Jerry Fischer’s Handbook explains in plain terms why moldings shrink and warp, shows how additives and reinforcements change the picture, sets out the effect of molding process conditions, and explains why you never can have a single ‘correct’ shrinkage value. It goes on to demonstrate how to alleviate the problem through careful design of the molded part and the mold, and by proper material selection. It also examines computer-aided methods of forecasting shrinkage and warpage. And most important of all, the Handbook gives you the data you need to work with. Authoritative and rooted in extensive industrial experience, the expert guidance contained in this handbook offers practical understanding to novices, and new insights to readers already skilled in the art of injection molding and mold making Contains the answers to common problems and detailed advice on how to control mold and post-mold shrinkage and warpage Case Studies illustrate and enrich the text; Data tables provide the empirical data that is essential for success, but hard to come by
Download or read book Runner and Gating Design Handbook 3e written by John P. Beaumont and published by . This book was released on 2019-10-07 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the first time, both the art and the science of designing runners and gates are presented in a concise format. Tried and true runner and gating design techniques successfully used with various materials and molding applications are described together with cutting edge new technologies. The book will help readers determine when to use what type of runner system and how to isolate molding problems generated by the gate and runner vs. other molding issues. Much emphasis is placed on the critical features in a hot runner design and how to determine what type of design is best for a specific application. Finally, readers will be able to separate the sales hype from reality when dealing with hot runner suppliers.
Download or read book The Secrets of Building a Plastic Injection Molding Machine written by Vincent R. Gingery and published by David J. Gingery Publishing, LLC. This book was released on 2015-11-30 with total page 107 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is a book that brings the art of plastic injection molding to the home shop level. Working with plastics can be a fun and profitable hobby. If you have ever wanted to produce custom made plastic parts or just want to know how it’s done then this book is for you. Included are complete step by step instructions on how to build a small inexpensive table top injection molding machine capable of injecting up to 1/2 ounce of plastic into a mold. Sources for plastic will be those things normally thrown away. Stuff like plastic milk jugs, soda pop bottles, plastic oil cans etc. You will learn the basic principles of injection molding and how to design and make your own molds. Begin by making a simple mold to test the machine. Then a mold for a plastic knob that will be used on the machine. Progress to a mold for a small plastic container with a snap lid. It won’t be long before you will be creating new products of your own design. I’ll even show you how to cast replacements for broken or missing plastic parts. Just think of the possibilities. And the finished items you make will turn out so nice and look so professional that it will be hard to believe you made them yourself. Construction is simple and straight forward, but it will require basic metal working knowledge and access to a metal lathe and a drill press along with other hand and power tools associated with metal working and machine work in general.
Download or read book Robust Process Development and Scientific Molding written by Suhas Kulkarni and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2017-01-16 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book introduces the reader to the concepts of Scientific Molding and Scientific Processing for Injection Molding, geared towards developing a robust, repeatable, and reproducible (3Rs) molding process. The effects of polymer morphology, thermal transitions, drying, and rheology on the injection molding process are explained in detail. The development of a robust molding process is broken down into two sections and is described as the Cosmetic Process and the Dimensional Process. Scientific molding procedures to establish a 3R process are provided. The concept of Design of Experiments (DOEs) for and in injection molding is explained, providing an insight into the cosmetic and dimensional process windows. A plan to release qualified molds into production with troubleshooting tips is also provided. Topics that impact a robust process such as the use of regrind, mold cooling, and venting are also described. Readers will be able to utilize the knowledge gained from the book in their day-to-day operations immediately. The second edition includes a completely new chapter on Quality Concepts, as well as much additional material throughout the book, covering fountain flow, factors affecting post mold shrinkage, and factor selections for DOEs. There are also further explanations on several topics, such as in-mold rheology curves, cavity imbalances, intensification ratios, gate seal studies, holding time optimization of hot runner molds, valve gated molds, and parts with large gates. A troubleshooting guide for common molded defects is also provided.
Download or read book Injection Molding Troubleshooting Guide written by and published by . This book was released on 1996 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plastics Injection Molding written by José R. Lerma Valero and published by . This book was released on 2019-12-09 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics Injection Molding: Scientific Molding, Recommendations, and Best Practices is a user-friendly reference book and training tool, with all the essentials to understand injection molding of plastics. It is a practical guide to refining and controlling the process, increasing robustness and consistency, increasing productivity and profitability, and reducing costs. This book contains structured information on process definitions and parameters, optimization methods, key points, interpretation of data sheets, among other useful recommendations regarding both technology and design. It also provides analysis of process deviation, defects, incidents, etc. as well as a section dedicated to material selection and comparison. It includes a bonus of downloadable Excel spreadsheets for application to scientific molding, process analysis, and optimization. This book is aimed at injection molding technicians, process engineers, quality engineers, mold designers, part designers, simulation engineers, team leaders, plant managers, and those responsible for purchasing plastic materials.
Download or read book Plastic Injection Molding Manufacturing Startup and Management written by Douglas M. Bryce and published by Society of Manufacturing Engineers. This book was released on 1999 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book in the Plastics Injection Molding series addresses the many facets of running a molding company including selecting the right equipment, identifying costs to determine price, making the most of available resources (including personnel), and complying with industry and quality standards. Also discussed are key company strategies that can determine whether a company operates in the red or is profitable. This book also includes a benchmarking feature that allows decision-makers to gauge their company's competitiveness in comparison to the top 50 molders in the United States.
Download or read book Stretch Blow Molding written by Ottmar Brandau and published by William Andrew. This book was released on 2016-08-10 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stretch Blow Molding, Third Edition, provides the latest on the blow molding process used to produce bottles of the strength required for carbonated drinks. In this updated handbook, Ottmar Brandau introduces the technology of stretch blow molding, explores practical aspects of designing and running a production line, and looks at practical issues for quality control and troubleshooting. As an experienced engineer, manager, and consultant, Brandau’s focus is on optimizing the production process, improving quality, and reducing cycle time. In this new edition, the author has thoroughly reviewed the content of the book, providing updates on new developments in stretch blow molding, including neck sizes, new equipment and processes, and the economics of the process. The book is a thoroughly practical handbook which provides engineers and managers with the toolkit to improve production and engineering aspects in their own businesses, allowing them to save money, increase output, and improve competitiveness by adopting new technologies. Provides knowledge and understanding of the latest technological and best practice developments in stretch blow molding Includes money saving, practical strategies to optimize the production process, improve quality, and reduce cycle times Provides a guide to the training of operators, as well as tactics on how to troubleshoot when products are faulty, productivity is low, or machinery is not operating as expected
Download or read book Troubleshooting Injection Moulding written by Vannessa Goodsgip and published by iSmithers Rapra Publishing. This book was released on 2004 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Injection moulding is one of the most commonly used processing technologies for plastics materials. Proper machine set up, part and mould design, and material selection can lead to high quality production. This review outlines common factors to check when preparing to injection mould components, so that costly mistakes can be avoided. This review examines the different types of surface defects that can be identified in plastics parts and looks at ways of solving these problems. Useful flow charts to illustrate possible ways forward are included. Case studies and a large b257 of figures make this a very useful report.