Download or read book Injection Molding of Thermoplastic Materials 2 written by John Goff and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the years 1984 to 1989, we published a series of articles on the molding of thermoplastics, and of thermosetting materials, in the monthly magazine British Plastics and Rubber (B P & R). These articles were very well received and we also received a large number of requests for reprints. The articles were also translated into languages other than English. In order to cater for what is obviously a need in both the ther moplastics, and the thermosetting, molding industries, we there fore brought the information together and produced it in book form. To make the material easier to handle we produced it in the form of several books and this is one of them. We can only hope that the information so presented, serves you well and that you find the information useful. We in turn would like to thank the editor of the magazine B P & R for helping us in this matter. Thanks are also due to our many friends and colleagues throughout the molding industry for their useful help and advice: in particular, the company Moldflow (Europe) limited deserve a special mention as they allowed us to extract information from their extensive data base.
Download or read book Rheological Fundamentals of Polymer Processing written by J.A. Covas and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experts in rheology and polymer processing present up-to-date, fundamental and applied information on the rheological properties of polymers, in particular those relevant to processing, contributing to the physical understanding and the mathematical modelling of polymer processing sequences. Basic concepts of non-Newtonian fluid mechanics, micro-rheological modelling and constitutive modelling are reviewed, and rheological measurements are described. Topics with practical relevance are debated, such as linear viscoelasticity, converging and diverging flows, and the rheology of multiphase systems. Approximation methods are discussed for the computer modelling of polymer melt flow. Subsequently, polymer processing technologies are studied from both simulation and engineering perspectives. Mixing, crystallization and reactive processing aspects are also included. Audience: An integrated and complete view of polymer processing and rheology, important to institutions and individuals engaged in the characterisation, testing, compounding, modification and processing of polymeric materials. Can also support academic polymer processing engineering programs.
Download or read book Injection Molding of Thermoplastics Materials 1 written by John Goff and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the years 1987 and 1988 we published a series of articles on the molding of thermoplastics materials in the magazine British Plastics and Rubber (B P & R). These articles were very well received and we also received a large number of requests for reprints. In order to cater for what is obviously a need in the thermoplas tics molding industry, we therefore brought the information together and produced it in the form of a book. We can only hope that it serves you well and that you find the information useful. We in turn would like to thank the editor of the magazine B P & R for helping us in this matter. Thanks are also due to our many friends and colleagues throughout the molding industry for their useful help and advice, in particular the company Moldflow (Europe) Limited deserve a special mention as they allowed us to extract information from their extensive data base.
Download or read book The Complete Part Design Handbook written by E. Alfredo Campo and published by Hanser Publications. This book was released on 2006 with total page 902 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook was written for the injection molding product designer who has a limited knowledge of engineering polymers. It is a guide for the designer to decide which resin and design geometries to use for the design of plastic parts. It can also offer knowledgeable advice for resin and machine selection and processing parameters. Manufacturer and end user satisfaction is the ultimate goal.
Download or read book Specialized Injection Molding Techniques written by Hans-Peter Heim and published by William Andrew. This book was released on 2015-11-02 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special Injection Molding Techniques covers several techniques used to create multicomponent products, hollow areas, and hard-soft combinations that cannot be produced with standard injection molding processes. It also includes information on the processing techniques of special materials, including foaming agents, bio-based materials, and thermosets. The book describes the most industrially relevant special injection molding techniques, with a detailed focus on understanding the basics of each technique and its main mechanisms, i.e., temperature, mold filling, bonding, residual stresses, and material behavior, also providing an explanation of process routes and their variants, and discussions of the most influencing process parameters. As special molding technologies have the potential to transform plastics processing to a highly-efficient, integrated type of manufacturing, this book provides a timely survey of these technologies, putting them into context, accentuating new opportunities, and giving relevant information on processing. Provides information about the basics needed for understanding several special injection molding techniques, including flow phenomena, bonding mechanisms, and thermal behavior Covers the basics of each technique and its main mechanisms, i.e., temperature, mold filling, bonding, residual stresses, and material behavior Discusses the most relevant processing parameters for each injection molding technique Presents a variety of techniques, including gas and water assisted injection molding, multi component injection molding, hybrid injection molding, injection molding of bio-based materials, and techniques for thermoset
Download or read book Injection Molding Of Engineering Thermoplastics written by A. Whelan and published by Springer. This book was released on 1990-07-31 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Injection and Compression Molding Fundamentals written by Isayev and published by Routledge. This book was released on 2017-11-01 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: This outstanding reference presents an up-to-date account of investigations during the last10 years in the area of injection and compression molding of polymers.Injection and Compression Molding Fundamentals considers simulation andexperimentation of flow dynamics in the cavity and delivery system . . . discussesrheology and viscoelastic modeling ... clarifies fiber orientation ... delineates residualstresses and processing-property relationships in molded parts ... and details computeraideddesign and manufacture of the mold.In addition, the book highlights specific features and problems related to the molding ofthermoplastics, rubbers, and thermosets ... and reveals the current status of the sciencebasedtechnology related to injection and compression molding.The most detailed and authoritative reference of its type, Injection and CompressionMolding Fundamentals is an invaluable resource for plastics, mechanical, andchemical engineers; colloid, oil, and color chemists; polymer engineers and scientists;mold designers and manufacturers; rheologists; and materials scientists. The book willalso be of value for use in graduate-level courses in plastics, mechanical, chemical, andpolymer engineering, and in short courses and seminars offered by professional societies.
Download or read book Thermoplastics written by D.P. Bashford and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: The overall aim of this book is to aid the process of sourcing and selecting appropriate thermoplastic polymers. There are now a wide diversity of thermoplastics offered for commercial uses. At one end of the range are the high-volume commodity materials for short life consumer applications. Whereas at the other end are the high value engineering materials; with significant levels of mechanical, physical and electrical performance. Within this publication, the generic groups of thermoplastics can be identified, along with their respective attributes and limitations. All thermoplastics are available in different grades. The constituents selected to form a grade are chosen to modify aspects of material behaviour, both during processing and in the final moulded form. The directory addresses materials which can be obtained in granular, powder or paste form for subsequent processing. Information is not provided directly on semi-finished product forms, such as films, fibres, sheet or profiles, other than when inferred from the processing descriptions of specified grades. The directory covers virgin or compounded material. It does not specifically address reclaimed or recycled grades. Data is provided for the mechanical and physical properties of moulded grades as processed by the route intended by the primary manufacturer (M) or compounder (C). Material grades can be obtained from a number of sources; either the original polymer manufacturer or a recognised compounder who produces a range of grades.
Download or read book Computer Aided Innovation of New Materials II written by M. Doyama and published by Elsevier. This book was released on 2017-01-31 with total page 980 pages. Available in PDF, EPUB and Kindle. Book excerpt: With advanced materials being in the midst of a widely acknowledged revolution, there is relentless pressure on scientists and engineers to be on the cutting edge of emerging theories and design methodologies. The 379 papers in this two part volume bring together the experience of specialists in the entire field of applications of Materials Science. This multidisciplinary meeting was held to bring together workers in a wide range of materials science and engineering activities who employ common analytical and experimental methods in their day to day work. The results of the meeting are of worldwide interest, and will help to stimulate future research and analysis in this area.
Download or read book Thermoplastics and Thermoplastic Composites written by Michel Biron and published by William Andrew. This book was released on 2018-06-06 with total page 1164 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermoplastics and Thermoplastic Composites, Third Edition bridges the technology and business aspects of thermoplastics, providing a guide designed to help engineers working in real-world industrial settings. The author explores the criteria for material selection, provides a detailed guide to each family of thermoplastics, and explains the various processing options for each material type. More than 30 families of thermoplastics are described with information on their advantages and drawbacks, special grades, prices, transformation processes, applications, thermal behavior, technological properties (tenacity, friction, dimensional stability), durability (ageing, creep, fatigue), chemical and fire behavior, electrical properties, and joining possibilities. In this third edition, standards and costs have been updated for all materials, and more information on topics such as bioplastics, 3D printing and recycling have been added. In addition, an entirely new chapter on the concept of ‘Industry 4.0’ has been added, with guidance and suggestions on the incorporation of virtualization, connectivity, and automation into the plastics engineering process to reduce materials and processing failure. Includes detailed case studies that illustrate best practices across a wide range of applications and industry sectors Presents a new chapter on the ‘Industry 4.0’ concept Suggests software solutions to assist with design, decision-making and management, along with other forms of automation
Download or read book Thermoplastic Elastomers written by Adel El-Sonbati and published by BoD – Books on Demand. This book was released on 2012-03-28 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermoplastics can be used for various applications, which range from household articles to the aeronautic sector. This book, "Thermoplastic Elastomers", is comprised of nineteen chapters, written by specialized scientists dealing with physical and/or chemical modifications of thermoplastics and thermoplastic starch. Such studies will provide a great benefit to specialists in food, electric, telecommunication devices, and plastic industries. Each chapter provides a comprehensive introduction to a specific topic, with a survey of developments to date.
Download or read book High Performance and Optimum Design of Structures and Materials II written by S. Hernández and published by WIT Press. This book was released on 2016-11-28 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing papers from the 2nd High Performance Design of Structures and Materials and the Optimum Design of Structures conference, following the success of a number of meetings since 1989, this book will be of interest to those in any engineering field. The use of novel materials and new structural concepts nowadays is not restricted to highly technical areas like aerospace, aeronautical applications or the automotive industry, but affects all engineering fields including those such as civil engineering and architecture. Most high performance structures require the development of a generation of new higher performance sustainable materials, which can more easily resist a range of external stimuli or react in a non-conventional manner. Emphasis is placed on intelligent structures and materials as well as the application of computational methods for their modelling, control and management. Optimisation problems of interest involve those related to size, shape and topology of structures and materials. Optimisation techniques have much to offer to those involved in the design of new industrial products. The development of new algorithms and the appearance of powerful commercial computer codes with easy to use graphical interfaces have created a fertile field for the incorporation of optimisation into the design process in all engineering disciplines. The book addresses the topic of design optimisation with welcomed contributions on numerical methods, different optimisation techniques and new software. Several of the topics covered are: Composite materials and structures; Material characterisation; Experiments and numerical analysis; Transformable structures; Environmentally friendly and sustainable structures; Evolutionary methods in optimisation; Aerospace structures; Biomechanics application and Pneumatic structures.
Download or read book Injection Molding of Thermoplastics Materials written by Tony Whelan and published by . This book was released on 1990 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lignin Chemistry and Applications written by Jin Huang and published by Elsevier. This book was released on 2019-02-07 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lignin Chemistry and Application systematically discusses the structure, physical and chemical modification of lignin, along with its application in the field of chemicals and materials. It presents the history of lignin chemistry and lignin-modified materials, describes recent progresses, applications and studies, and prospects the development direction of high value applications of lignin in the field of material science. In addition to covering the basic theories and technologies relating to the research and application of lignin in polymer chemistry and materials science, the book also summarizes the latest applications in rubber, engineering plastics, adhesives, films and hydrogels. Systematically discusses the structure, physical and chemical modification of lignin and its application in materials Presents the latest research results in the field of lignin Indicates the development direction of high value applications of lignin in a range of fields, including petrochemicals, household applications, medicine, agriculture, and more
Download or read book Multi material Injection Moulding written by V. Goodship and published by iSmithers Rapra Publishing. This book was released on 2002 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many variations of injection moulding have been developed and one of the rapidly expanding fields is multi-material injection moulding. This review looks at the many techniques being used, from the terminology to case studies. The three primary types of multi-material injection moulding examined are multi-component, multi-shot and over-moulding. The basic types of multi-material injection moulding, the issues surrounding combining different types of polymers and examples of practical uses of this technology are described.
Download or read book Polypropylene written by Clive Maier and published by William Andrew. This book was released on 1998-04-15 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polypropylene: The Definitive User's Guide and Databook presents in a single volume a panoramic and up-to-the-minute user's guide for today's most important thermoplastic. The book examines every aspectùscience, technology, engineering, properties, design, processing, applicationsùof the continuing development and use of polypropylene. The unique treatment means that specialists can not only find what they want but for the first time can relate to and understand the needs and requirements of others in the product development chain. The entire work is underpinned by very extensive collections of property data that allow the reader to put the information to real industrial and commercial use. Despite the preeminence and unrivaled versatility of polypropylene as a thermoplastic material to manufacture, relatively few books have been devoted to its study. Polypropylene: The Definitive User's Guide and Databook not only fills the gap but breaks new ground in doing so. Polypropylene is the most popular thermoplastic in use today, and still one of the fastest growing. Polypropylene: The Definitive User's Guide and Databook is the complete workbook and reference resource for all those who work with the material. Its comprehensive scope uniquely caters to polymer scientists, plastics engineers, processing technologists, product designers, machinery and mold makers, product managers, end users, researchers and students alike.
Download or read book New Polymer Composite Materials II written by Svetlana Yu. Khashirova and published by Trans Tech Publications Ltd. This book was released on 2020-10-27 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected peer-reviewed full text papers from XVI International Scientific and Practical Conference "New Polymer Composite Materials" Selected, peer-reviewed papers from the XVI International scientific and practical conference «New Polymer Composite Materials» (NPCM 2020), October 7-11, 2020, Nalchik, Russian Federation
