Download or read book Initiatives of Precision Engineering at the Beginning of a Millennium written by Ichiro Inasaki and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 996 pages. Available in PDF, EPUB and Kindle. Book excerpt: Faced with ever-increasing market demands, manufacturing industry is forced to seek innovation and technological breakthrough. This state-of-the-art text aims to integrate broad aspects of precision and production engineering to cope with rapid changes in market needs and technological developments as we enter the 21st century. It addresses basic theory, extensive research in advanced topics, industrial applications, and relevant surveys in related fields. Major subjects covered by this book include: Advanced manufacturing systems; Ultra-precision machining and micro machining; Nanotechnology for fabrication and measurement; Chemo-mechanical processes; Rapid prototyping technology; New materials and advanced processes; Computer-aided production engineering; Manufacturing process control; Planning. This volume contains the proceedings of the 10th International Conference on Precision Engineering (ICPE), which was held in July 2001, in Yokohama, Japan. ICPE is a well-established conference in the field of production and precision engineering, covering a wide range of topics for future-oriented manufacturing systems and processes; it is organized by the Japan Society for Precision Engineering (JSPE). This book can be used as a reference for graduate and undergraduate courses in precision and production engineering, and also for researchers and industrial engineers to capture current trends in this field.

Download or read book Microfabrication and Precision Engineering written by J. Paulo Davim and published by Woodhead Publishing. This book was released on 2016-11-19 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microfabrication and precision engineering is an increasingly important area relating to metallic, polymers, ceramics, composites, biomaterials and complex materials. Micro-electro-mechanical-systems (MEMS) emphasize miniaturization in both electronic and mechanical components. Microsystem products may be classified by application, and have been applied to a variety of fields, including medical, automotive, aerospace and alternative energy. Microsystems technology refers to the products as well as the fabrication technologies used in production. With detailed information on modelling of micro and nano-scale cutting, as well as innovative machining strategies involved in microelectrochemical applications, microchannel fabrication, as well as underwater pulsed Laser beam cutting, among other techniques, Microfabrication and Precision Engineering is a valuable reference for students, researchers and professionals in the microfabrication and precision engineering fields. Contains contributions by top industry experts Includes the latest techniques and strategies Special emphasis given to state-of-the art research and development in microfabrication and precision engineering

Download or read book Modern Manufacturing Processes written by Muammer Koç and published by John Wiley & Sons. This book was released on 2019-09-04 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an in-depth understanding of the fundamentals of a wide range of state-of-the-art materials manufacturing processes Modern manufacturing is at the core of industrial production from base materials to semi-finished goods and final products. Over the last decade, a variety of innovative methods have been developed that allow for manufacturing processes that are more versatile, less energy-consuming, and more environmentally friendly. This book provides readers with everything they need to know about the many manufacturing processes of today. Presented in three parts, Modern Manufacturing Processes starts by covering advanced manufacturing forming processes such as sheet forming, powder forming, and injection molding. The second part deals with thermal and energy-assisted manufacturing processes, including warm and hot hydrostamping. It also covers high speed forming (electromagnetic, electrohydraulic, and explosive forming). The third part reviews advanced material removal process like advanced grinding, electro-discharge machining, micro milling, and laser machining. It also looks at high speed and hard machining and examines advances in material modeling for manufacturing analysis and simulation. Offers a comprehensive overview of advanced materials manufacturing processes Provides practice-oriented information to help readers find the right manufacturing methods for the intended applications Highly relevant for material scientists and engineers in industry Modern Manufacturing Processes is an ideal book for practitioners and researchers in materials and mechanical engineering.

Download or read book 4M 2005 First International Conference on Multi Material Micro Manufacture written by Stefan Dimov and published by Elsevier. This book was released on 2005-12-07 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: 4M 2005 - First International Conference on Multi-Material Micro Manufacture

Download or read book Electrolytic In Process Dressing ELID Technologies written by Hitoshi Ohmori and published by CRC Press. This book was released on 2011-06-22 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited by experts, one of whom developed the technology, Electrolytic In-Process Dressing (ELID) Technologies: Fundamentals and Applications provides an overview of ELID processes with correlations between the main parameters, describes ELID operations, and illustrates the concepts with case studies. The book's authoritative coverage of major conce

Download or read book Micro Cutting written by Dehong Huo and published by John Wiley & Sons. This book was released on 2013-07-30 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro-Cutting: Fundamentals and Applications comprehensively covers the state of the art research and engineering practice in micro/nano cutting: an area which is becoming increasingly important, especially in modern micro-manufacturing, ultraprecision manufacturing and high value manufacturing. This book provides basic theory, design and analysis of micro-toolings and machines, modelling methods and techniques, and integrated approaches for micro-cutting. The fundamental characteristics, modelling, simulation and optimization of micro/nano cutting processes are emphasized with particular reference to the predictabilty, producibility, repeatability and productivity of manufacturing at micro and nano scales. The fundamentals of micro/nano cutting are applied to a variety of machining processes including diamond turning, micromilling, micro/nano grinding/polishing, ultraprecision machining, and the design and implementation of micro/nano cutting process chains and micromachining systems. Key features • Contains contributions from leading global experts • Covers the fundamental theory of micro-cutting • Presents applications in a variety of machining processes • Includes examples of how to implement and apply micro-cutting for precision and micro-manufacturing Micro-Cutting: Fundamentals and Applications is an ideal reference for manufacturing engineers, production supervisors, tooling engineers, planning and application engineers, as well as machine tool designers. It is also a suitable textbook for postgraduate students in the areas of micro-manufacturing, micro-engineering and advanced manufacturing methods.

Download or read book Micro Manufacturing written by Muammer Koç and published by John Wiley & Sons. This book was released on 2011-05-06 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first of its kind to collectively address design-based and mechanical micro-manufacturing topics in one place. It focuses on design and materials selection, as well as the manufacturing of micro-products using mechanical-based micro-manufacturing process technologies. After addressing the fundamentals and non-metallic-based micro-manufacturing processes in the semiconductor industry, it goes on to address specific metallic-based micro-manufacturing processes, such as: micro-forming, micro-machining, micro-molding, micro-laser processing, micro-layered manufacturing, micro-joining, micro-assembly and materials handling, and microEDM and ECM. The book provides an in-depth understanding of materials behavior at micro-scales and under different micro-scale processing conditions, while also including a wide variety of emerging micro-scale manufacturing issues and examples.

Download or read book Hybrid Machining written by Xichun Luo and published by Academic Press. This book was released on 2018-06-27 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hybrid Machining: Theory, Methods, and Case Studies covers the scientific fundamentals, techniques, applications and real-world descriptions of emerging hybrid machining technology. This field is advancing rapidly in industrial and academic contexts, creating a great need for the fundamental and technical guidance that this book provides. The book includes discussions of basic concepts, process design principles, standard hybrid machining processes, multi-scale modeling approaches, design, on-machine metrology and work handling systems. Readers interested in manufacturing systems, product design or machining technology will find this one-stop guide to hybrid machining the ideal reference. Includes tables of recommended processing parameters for key engineering materials/products for each hybrid machining process Provides case studies covering real industrial applications Explains how to use multiscale modeling for hybrid machining

Download or read book Nano and Micromachining written by J. Paulo Davim and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the fundamentals and recent advances in nano and micromachining for modern manufacturing engineering. It begins by providing an outline of nanomachining with emphasis being given to molecular dynamics, cutting, and chip formation, before discussing various advances in field and machining processes, including advances in diamond cutting tools, conventional processes (microturning, microdrilling, micromilling, etc.), grinding and ultra-precision processes, and non-conventional machining processes (laser micromachining, EDM micromachining, etc.). The coverage concludes with an evaluation of subsurface damages in nano and micromachining and a presentation of applications in industry. As such, not only is this book useful to those studying engineering or machining at both an undergraduate and postgraduate level, but it also serves as a useful reference guide for academics and engineers involved in these areas and related industries.

Download or read book Nanofinishing Science and Technology written by Vijay Kumar Jain and published by CRC Press. This book was released on 2016-12-12 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finishing is the final operation after a part is sized and shaped. Currently in high tech industries, there is a demand for nano level surface finishing of components. This process is done to improve the surface finish, to remove the recast layer, or to remove surface and sub-surface defects. The result is low friction, longer product life, and low power requirements. Equally important is the aesthetic aspect of the product. This subject is growing very fast from the technology as well as a science point of view. Books on this subject are very limited, particularly those ones that deal with both the science as well as the technology aspects.

Download or read book Accuracy Enhancement Technologies for Micromachining Processes written by Golam Kibria and published by Springer Nature. This book was released on 2020-02-20 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book bridges the gap between the demand for micro-featured components on the one hand, and successful micromachining of miniature products on the other. In addition to covering micromachining in the broader sense, it specifically addresses novel machining strategies implemented in various advanced micromachining processes to improve machining accuracy, energy consumption, component durability, and miniature-scale applicability. The book’s main goal is to present the capabilities of advanced micromachining processes in terms of miniature product manufacturing by highlighting various innovative machining strategies that can be used to augment the production scale and precision alike.

Download or read book Micromanufacturing Engineering and Technology written by Yi Qin and published by William Andrew. This book was released on 2015-05-08 with total page 859 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micromanufacturing Engineering and Technology, Second Edition, covers the major topics of micro-manufacturing. The book not only covers theory and manufacturing processes, but it uniquely focuses on a broader range of practical aspects of micro-manufacturing engineering and utilization by also covering materials, tools and equipment, manufacturing system issues, control aspects and case studies. By explaining material selection, design considerations and economic aspects, the book empowers engineers in choosing among competing technologies. With a focus on low-cost and high-volume micro-manufacturing processes, the updated title covers technologies such as micro-mechanical-cutting, laser-machining, micro-forming, micro-EDM, micro-ECM, hot-embossing, micro-injection molding, laser micro-sintering, thin film fabrication, inkjet technology, micro-joining, multiple processes machines, and more. Edited by one of the few world-experts in this relatively new, but rapidly-expanding area and presenting chapters written by a 40-strong team of leading industry specialists, this book is an invaluable source of information for engineers, R&D researchers and academics. Covers key micro-manufacturing technologies, processes and equipment with high-volume production capabilities, enabling large companies as well as SMEs to introduce those technologies in production and business and reduce production costs Outlines micro-manufacturing system engineering and practical issues pertaining to material, design, handling, metrology, inspection, testing, sensors, control, system integration and software, and micro-factories Enables manufacturing practitioners to choose the right technology suitable for a particular product-manufacture

Download or read book Scientific and Engineering Computations for the 21st Century Methodologies and Applications written by M. Mori and published by Elsevier. This book was released on 2002-12-03 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 20th century saw tremendous achievements and progress in science and technology. Undoubtedly, computers and computer-related technologies acted as one of vital catalysts for accelerating this progress in the latter half of the century. The contributions of mathematical sciences have been equally profound, and the synergy between mathematics and computer science has played a key role in accelerating the progress of both fields as well as science and engineering. Mathematical sciences will undoubtedly continue to play this vital role in this new century. In particular, mathematical modeling and numerical simulation will continue to be among the essential methodologies for solving massive and complex problems that arise in science, engineering and manufacturing. Underpinning this all from a sound, theoretical perspective will be numerical algorithms. In recognition of this observation, this volume focuses on the following specific topics. (1) Fundamental numerical algorithms (2) Applications of numerical algorithms (3) Emerging technologies. The articles included in this issue by experts on advanced scientific and engineering computations from numerous countries elucidate state-of-the-art achievements in these three topics from various angles and suggest the future directions. Although we cannot hope to cover all the aspects in scientific and engineering computations, we hope that the articles will interest, inform and inspire members of the science and engineering community.

Download or read book Non Conventional Machining in Modern Manufacturing Systems written by Kumar, Kaushik and published by IGI Global. This book was released on 2018-09-21 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continuous improvements in machining practices have created opportunities for businesses to develop more streamlined processes. This not only leads to higher success in day-to-day production, but also increases the overall success of businesses. Non-Conventional Machining in Modern Manufacturing Systems provides emerging research exploring the theoretical and practical aspects of technological advancements in industrial environments and applications in manufacturing. Featuring coverage on a broad range of topics such as optimization techniques, electrical discharge machining, and hot machining, this book is ideally designed for business managers, engineers, business professionals, researchers, and academicians seeking current research on non-conventional and technologically advanced machining processes.

Download or read book Towards Synthesis of Micro Nano systems written by Fumihiko Kimura and published by Springer Science & Business Media. This book was released on 2006-10-19 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of papers, presented at the 11th International Conference on Precision Engineering, offers a broader global perspective on the challenges and opportunities ahead. The discussion encompasses leading-edge technologies and forecasts future trends. Coverage includes advanced manufacturing systems; ultra-precision- and micro-machining; nanotechnology for fabrication and measurement; rapid prototyping and production technology; new materials and advanced processes; computer-aided production engineering; manufacturing process control; production planning and scheduling, and much more.

Download or read book Micromanufacturing Processes written by V.K. Jain and published by CRC Press. This book was released on 2016-04-19 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increased demand for and developments in micromanufacturing have created a need for a resource that covers both the science and technology of this rapidly growing area. With contributions from eminent professors and researchers actively engaged in teaching, research, and development, Micromanufacturing Processes details the basic principles, tools,

Download or read book From MEMS to Bio MEMS and Bio NEMS written by Marc J. Madou and published by CRC Press. This book was released on 2011-06-13 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: From MEMS to Bio-MEMS and Bio-NEMS: Manufacturing Techniques and Applications details manufacturing techniques applicable to bionanotechnology. After reviewing MEMS techniques, materials, and modeling, the author covers nanofabrication, genetically engineered proteins, artificial cells, nanochemistry, and self-assembly. He also discusses scaling laws in MEMS and NEMS, actuators, fluidics, and power and brains in miniature devices. He concludes with coverage of various MEMS and NEMS applications. Fully illustrated in color, the text contains end-of-chapter problems, worked examples, extensive references for further reading, and an extensive glossary of terms. Details the Nanotechnology, Biology, and Manufacturing Techniques Applicable to Bionanotechnology Topics include: Nonlithography manufacturing techniques with lithography-based methods Nature as an engineering guide and contrasts top-down and bottom-up approaches Packaging, assembly, and self-assembly from ICs to DNA and biological cells Selected new MEMS and NEMS processes and materials, metrology techniques, and modeling Scaling laws, actuators, power generation, and the implementation of brains in miniaturizes devices Different strategies for making micromachines smarter The transition out of the laboratory and into the marketplace The third volume in Fundamentals of Microfabrication and Nanotechnology, Third Edition, Three-Volume Set, the book discusses top-down and bottom-up manufacturing methods and explains how to use nature as a guide. It provides a better understanding of how to match different manufacturing options with a given application that students can use to identify additional killer MEMS and NEMS applications. Other volumes in the set include: Solid-State Physics, Fluidics, and Analytical Techniques in Micro- and Nanotechnology Manufacturing Techniques for Microfabrication and Nanotechnology