Download or read book Advanced Aircraft Design written by Egbert Torenbeek and published by John Wiley & Sons. This book was released on 2013-05-28 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the overall appearance of modern airliners has not changed a lot since the introduction of jetliners in the 1950s, their safety, efficiency and environmental friendliness have improved considerably. Main contributors to this have been gas turbine engine technology, advanced materials, computational aerodynamics, advanced structural analysis and on-board systems. Since aircraft design became a highly multidisciplinary activity, the development of multidisciplinary optimization (MDO) has become a popular new discipline. Despite this, the application of MDO during the conceptual design phase is not yet widespread. Advanced Aircraft Design: Conceptual Design, Analysis and Optimization of Subsonic Civil Airplanes presents a quasi-analytical optimization approach based on a concise set of sizing equations. Objectives are aerodynamic efficiency, mission fuel, empty weight and maximum takeoff weight. Independent design variables studied include design cruise altitude, wing area and span and thrust or power loading. Principal features of integrated concepts such as the blended wing and body and highly non-planar wings are also covered. The quasi-analytical approach enables designers to compare the results of high-fidelity MDO optimization with lower-fidelity methods which need far less computational effort. Another advantage to this approach is that it can provide answers to “what if” questions rapidly and with little computational cost. Key features: Presents a new fundamental vision on conceptual airplane design optimization Provides an overview of advanced technologies for propulsion and reducing aerodynamic drag Offers insight into the derivation of design sensitivity information Emphasizes design based on first principles Considers pros and cons of innovative configurations Reconsiders optimum cruise performance at transonic Mach numbers Advanced Aircraft Design: Conceptual Design, Analysis and Optimization of Subsonic Civil Airplanes advances understanding of the initial optimization of civil airplanes and is a must-have reference for aerospace engineering students, applied researchers, aircraft design engineers and analysts.
Download or read book Beyond Tube and Wing written by Bruce Larrimer and published by . This book was released on 2020-06-15 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engine Airframe Integration written by and published by . This book was released on 1992 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Aircraft Flight Mechanics written by Thomas R. Yechout and published by AIAA. This book was released on 2003 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on a 15-year successful approach to teaching aircraft flight mechanics at the US Air Force Academy, this text explains the concepts and derivations of equations for aircraft flight mechanics. It covers aircraft performance, static stability, aircraft dynamics stability and feedback control.
Download or read book Design and Analysis of Composite Structures written by Christos Kassapoglou and published by John Wiley & Sons. This book was released on 2011-07-05 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Analysis of Composite Structures enables graduate students and engineers to generate meaningful and robust designs of complex composite structures. Combining analysis and design methods for structural components, the book begins with simple topics such as skins and stiffeners and progresses through to entire components of fuselages and wings. Starting with basic mathematical derivation followed by simplifications used in real-world design, Design and Analysis of Composite Structures presents the level of accuracy and range of applicability of each method. Examples taken from actual applications are worked out in detail to show how the concepts are applied, solving the same design problem with different methods based on different drivers (e.g. cost or weight) to show how the final configuration changes as the requirements and approach change. Provides a toolkit of analysis and design methods to most situations encountered in practice, as well as analytical frameworks and the means to solving them for tackling less frequent problems. Presents solutions applicable to optimization schemes without having to run finite element models at each iteration, speeding up the design process and allowing examination of several more alternatives than traditional approaches. Includes guidelines showing how decisions based on manufacturing considerations affect weight and how weight optimization may adversely affect the cost. Accompanied by a website at www.wiley.com/go/kassapoglou hosting lecture slides and solutions to the exercises for instructors.
Download or read book Fundamentals of Aircraft and Airship Design written by Leland Malcolm Nicolai and published by AIAA (American Institute of Aeronautics & Astronautics). This book was released on 2010 with total page 940 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aircraft is only a transport mechanism for the payload, and all design decisions must consider payload first. Simply stated, the aircraft is a dust cover. "Fundamentals of Aircraft and Airship Design, Volume 1: Aircraft Design" emphasizes that the science and art of the aircraft design process is a compromise and that there is no right answer; however, there is always a best answer based on existing requirements and available technologies.
Download or read book On Subscale Flight Testing written by Alejandro Sobron and published by Linköping University Electronic Press. This book was released on 2018-11-05 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Downscaled physical models, also referred to as subscale models, have played an essential role in the investigation of the complex physics of flight until the recent disruption of numerical simulation. Despite the fact that improvements in computational methods are slowly pushing experimental techniques towards a secondary role as verification or calibration tools, real-world testing of physical prototypes still provides an unmatched confidence. Physical models are very effective at revealing issues that are sometimes not correctly identified in the virtual domain, and hence can be a valuable complement to other design tools. But traditional wind-tunnel testing cannot always meet all of the requirements of modern aeronautical research and development. It is nowadays too expensive to use these scarce facilities to explore different design iterations during the initial stages of aircraft development, or to experiment with new and immature technologies. Testing of free-flight subscale models, referred to as Subscale Flight Testing (SFT), could offer an affordable and low-risk alternative for complementing conventional techniques with both qualitative and quantitative information. The miniaturisation of mechatronic systems, the advances in rapid-prototyping techniques and power storage, as well as new manufacturing methods, currently enable the development of sophisticated test objects at scales that were impractical some decades ago. Moreover, the recent boom in the commercial drone industry has driven a quick development of specialised electronics and sensors, which offer nowadays surprising capabilities at competitive prices. These recent technological disruptions have significantly altered the cost-benefit function of SFT and it is necessary to re-evaluate its potential in the contemporary aircraft development context. This thesis aims to increase the comprehension and knowledge of the SFT method in order to define a practical framework for its use in aircraft design; focusing on low-cost, short-time solutions that don’t require more than a small organization and few resources. This objective is approached from a theoretical point of view by means of an analysis of the physical and practical limitations of the scaling laws; and from an empirical point of view by means of field experiments aimed at identifying practical needs for equipment, methods, and tools. A low-cost data acquisition system is developed and tested; a novel method for semi-automated flight testing in small airspaces is proposed; a set of tools for analysis and visualisation of flight data is presented; and it is also demonstrated that it is possible to explore and demonstrate new technology using SFT with a very limited amount of economic and human resources. All these, together with a theoretical review and contextualisation, contribute to increasing the comprehension and knowledge of the SFT method in general, and its potential applications in aircraft conceptual design in particular.
Download or read book Aerodynamics of Wings and Bodies written by Holt Ashley and published by Courier Corporation. This book was released on 1965-01-01 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: This excellent, innovative reference offers a wealth of useful information and a solid background in the fundamentals of aerodynamics. Fluid mechanics, constant density inviscid flow, singular perturbation problems, viscosity, thin-wing and slender body theories, drag minimalization, and other essentials are addressed in a lively, literate manner and accompanied by diagrams.
Download or read book Flight Stability and Automatic Control written by Robert C. Nelson and published by . This book was released on 1998 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition of this this flight stability and controls guide features an unintimidating math level, full coverage of terminology, and expanded discussions of classical to modern control theory and autopilot designs. Extensive examples, problems, and historical notes, make this concise book a vital addition to the engineer's library.
Download or read book Aircraft Design written by Daniel P. Raymer and published by AIAA (American Institute of Aeronautics & Astronautics). This book was released on 2006 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Winner of the Summerfield Book Award Winner of the Aviation-Space Writers Association Award of Excellence. --Over 30,000 copies sold, consistently the top-selling AIAA textbook title This highly regarded textbook presents the entire process of aircraft conceptual designfrom requirements definition to initial sizing, configuration layout, analysis, sizing, and trade studiesin the same manner seen in industry aircraft design groups. Interesting and easy to read, the book has more than 800 pages of design methods, illustrations, tips, explanations, and equations, and extensive appendices with key data essential to design. It is the required design text at numerous universities around the world, and is a favorite of practicing design engineers.
Download or read book Numerical Optimization Techniques for Engineering Design written by Garret N. Vanderplaats and published by McGraw-Hill Companies. This book was released on 1984 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Innovative Configurations and Advanced Concepts for Future Civil Aircraft written by Egbert Torenbeek and published by . This book was released on 2005 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aircraft Design Projects written by Lloyd R. Jenkinson and published by Elsevier. This book was released on 2003-04-28 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written with students of aerospace or aeronautical engineering firmly in mind, this is a practical and wide-ranging book that draws together the various theoretical elements of aircraft design - structures, aerodynamics, propulsion, control and others - and guides the reader in applying them in practice. Based on a range of detailed real-life aircraft design projects, including military training, commercial and concept aircraft, the experienced UK and US based authors present engineering students with an essential toolkit and reference to support their own project work.All aircraft projects are unique and it is impossible to provide a template for the work involved in the design process. However, with the knowledge of the steps in the initial design process and of previous experience from similar projects, students will be freer to concentrate on the innovative and analytical aspects of their course project. The authors bring a unique combination of perspectives and experience to this text. It reflects both British and American academic practices in teaching aircraft design. Lloyd Jenkinson has taught aircraft design at both Loughborough and Southampton universities in the UK and Jim Marchman has taught both aircraft and spacecraft design at Virginia Tech in the US.* Demonstrates how basic aircraft design processes can be successfully applied in reality* Case studies allow both student and instructor to examine particular design challenges * Covers commercial and successful student design projects, and includes over 200 high quality illustrations
Download or read book Aircraft Dynamics and Automatic Control written by Duane T. McRuer and published by Princeton University Press. This book was released on 2014-07-14 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aeronautical engineers concerned with the analysis of aircraft dynamics and the synthesis of aircraft flight control systems will find an indispensable tool in this analytical treatment of the subject. Approaching these two fields with the conviction that an understanding of either one can illuminate the other, the authors have summarized selected, interconnected techniques that facilitate a high level of insight into the essence of complex systems problems. These techniques are suitable for establishing nominal system designs, for forecasting off-nominal problems, and for diagnosing the root causes of problems that almost inevitably occur in the design process. A complete and self-contained work, the text discusses the early history of aircraft dynamics and control, mathematical models of linear system elements, feedback system analysis, vehicle equations of motion, longitudinal and lateral dynamics, and elementary longitudinal and lateral feedback control. The discussion concludes with such topics as the system design process, inputs and system performance assessment, and multi-loop flight control systems. Originally published in 1974. The Princeton Legacy Library uses the latest print-on-demand technology to again make available previously out-of-print books from the distinguished backlist of Princeton University Press. These editions preserve the original texts of these important books while presenting them in durable paperback and hardcover editions. The goal of the Princeton Legacy Library is to vastly increase access to the rich scholarly heritage found in the thousands of books published by Princeton University Press since its founding in 1905.
Download or read book Aerodynamic Design of Transport Aircraft written by E. Obert and published by IOS Press. This book was released on 2009-04-16 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: The origin of Aerodynamic Design of Transport Aircraft stems from the time when the author was appointed part-time professor in the Aerospace Faculty of Delft University of Technology. At the time his main activities were those of leading the departments of Aerodynamics, Performance and Preliminary Design at Fokker Aircraft Company. The groundwork for this book started in 1987 as a series of lecture notes consisting mainly of pictorial material with a minimum of English explanatory text. After the demise of Fokker in 1996 one feared that interest in aeronautical engineering would strongly diminish. As a result of this, the course was discontinued and the relationship between the author and the faculty came to an end. Two years later the situation was reappraised, and the interest in aeronautical engineering remained, so the course was reinstated with a former Fokker colleague Ronald Slingerland as lecturer. The lecture notes from these courses form the foundation of this publication.
Download or read book Airplane Design VII written by Jan Roskam and published by DARcorporation. This book was released on 1985 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Assessment of Wingtip Modifications to Increase the Fuel Efficiency of Air Force Aircraft written by National Research Council and published by National Academies Press. This book was released on 2007-08-06 with total page 77 pages. Available in PDF, EPUB and Kindle. Book excerpt: The high cost of aviation fuel has resulted in increased attention by Congress and the Air Force on improving military aircraft fuel efficiency. One action considered is modification of the aircraft's wingtip by installing, for example, winglets to reduce drag. While common on commercial aircraft, such modifications have been less so on military aircraft. In an attempt to encourage greater Air Force use in this area, Congress, in H. Rept. 109-452, directed the Air Force to provide a report examining the feasibility of modifying its aircraft with winglets. To assist in this effort, the Air Force asked the NRC to evaluate its aircraft inventory and identify those aircraft that may be good candidates for winglet modifications. This reportâ€"which considers other wingtip modifications in addition to wingletsâ€"presents a review of wingtip modifications; an examination of previous analyses and experience with such modifications; and an assessment of wingtip modifications for various Air Force aircraft and potential investment strategies.
