Download or read book Project Management for Construction written by Chris Hendrickson and published by Chris Hendrickson. This book was released on 1989 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Markup Profit written by Michael Stone and published by Craftsman Book Co. This book was released on 1999-01-01 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to succeed in a construction business you have to be able to mark up the price of your jobs to cover overhead expenses and make a decent profit. The problem is how much to mark it up. You don't want to lose jobs because you charge too much, and you don't want to work for free because you've charged too little. If you know how much to mark up you can apply it to your job costs and arrive at the right sales price for your work. This book gives you the background and the calculations necessary to easily figure the markup that is right for your business. Includes a CD-ROM with forms and checklists for your use.

Download or read book Construction Management written by Jason G Smith and published by CRC Press. This book was released on 2009-11-18 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: Construction projects are usually completed through the efforts of several specialty contractors that enter into performance agreements with the prime contractor. Mistakes, whether made while bidding or when executing a construction project, can be costly for the facility owner, general contractor, or subcontractor. Focused on helping the project team avoid these mistakes and run their projects more efficiently, this book describes how a prime contractor can coordinate the efforts of subcontractors and address common problems that can occur during various stages. Greater understanding of problematic aspects can assure that the full scope of the project is covered without redundancy.

Download or read book Multiple Criteria Decision Making MCDM Techniques for Business Processes Information Management written by Edmundas Kazimieras Zavadskas and published by MDPI. This book was released on 2019-03-08 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Information management is a common paradigm in modern decision-making. A wide range of decision-making techniques have been proposed in the literature to model complex business and engineering processes. In this Special Issue, 16 selected and peer-reviewed original research articles contribute to business information management in various current real-world problems by proposing crisp or uncertain multiple-criteria decision-making (MCDM) models and techniques, mostly including multi-attribute decision-making (MADM) approaches, in addition to a single paper proposing an interactive multi-objective decision-making (MODM) approach. Particular attention is devoted to information aggregation operators—65% of papers dealt with this item. The topics of this Special Issue gained attention in Europe and Asia. A total of 48 authors from seven countries contributed to this Issue. The papers are mainly concentrated in three application areas: supplier selection and rational order allocation, the evaluation and selection of goods or facilities, and personnel selection/partner selection. A number of new approaches are proposed that are expected to attract great interest from the research community.

Download or read book Digital Transformation of the Design Construction and Management Processes of the Built Environment written by Bruno Daniotti and published by Springer Nature. This book was released on 2019-12-30 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book focuses on the development of methods, interoperable and integrated ICT tools, and survey techniques for optimal management of the building process. The construction sector is facing an increasing demand for major innovations in terms of digital dematerialization and technologies such as the Internet of Things, big data, advanced manufacturing, robotics, 3D printing, blockchain technologies and artificial intelligence. The demand for simplification and transparency in information management and for the rationalization and optimization of very fragmented and splintered processes is a key driver for digitization. The book describes the contribution of the ABC Department of the Polytechnic University of Milan (Politecnico di Milano) to R&D activities regarding methods and ICT tools for the interoperable management of the different phases of the building process, including design, construction, and management. Informative case studies complement the theoretical discussion. The book will be of interest to all stakeholders in the building process – owners, designers, constructors, and faculty managers – as well as the research sector.

Download or read book Collaborative Construction Information Management written by Geoffrey Shen and published by Routledge. This book was released on 2009-06-02 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most construction projects are large and costly. Collaborative working involves two or more stakeholders sharing their efforts and resources to complete the project more effectively and efficiently. Collaborative, integrative and multi-disciplinary teams can tackle the complex issues involved in creating a viable built environment. This tends to be looked at from three interrelated perspectives: the technological, organizational, and social; and of these the key issue is to improve productivity and enable innovation through the empowerment and motivation of people. This book provides insights for researchers and practitioners in the building and construction industry as well as graduate students, written by an international group of leading scholars and professionals into the potential use, development and limitations of current collaborative technologies and practices. Material is grouped into the themes of advanced technologies for collaborative working, virtual prototyping in design and construction, building information modelling, managing the collaborative processes, and human issues in collaborative working.

Download or read book Supply Chain Integration in the Building Industry written by Ruben Vrijhoef and published by IOS Press. This book was released on 2011 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originally presented as the author's doctoral dissertation at Technische Universiteit Delft on November 25, 2011.

Download or read book Knowledge Management in the Construction Industry written by Abdul Samad Kazi and published by IGI Global. This book was released on 2005-01-01 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Presents a portfolio of concepts, methods, models, and tools supported by real life case studies from various corners of the globe providing insights into the management of knowledge in the construction industry.

Download or read book Building Information Modeling written by Dana K. Smith and published by John Wiley & Sons. This book was released on 2012-04-23 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: The optimal approach to design, build, operate, and maintainbuildings With this strategic guide to building information modeling(BIM), you’ll learn how to implement this new technology aspart of a comprehensive systems approach to the design,construction, management, operation, maintenance, and use ofbuildings. The authors, among the leading experts andpioneers in BIM, show you how BIM supports more streamlined,integrated, and efficient business processes throughout the lifecycle of buildings, from their initial conception through theireventual retirement or reuse. The result is better qualitybuildings, lower construction and operating costs, shorter projectturnaround times, and a higher quality of building information tosupport better business decisions. Moreover, they set forth aplan for incorporating BIM into every organization’s existingworkflows, enabling you to take full advantage of all the benefitsthat BIM offers. Everything you need to implement a BIM approach is setforth in detail, including: The business case for BIM, demonstrating how it can improvecollaboration, facilitate better design and construction, optimizeworkflow, and help reduce risk Guidance for meeting the challenges of BIM such as anentrenched business culture, the proliferation of BIM tools, andthe uneven rates of BIM adoption The “big picture” view showing how yourorganization can work with business partners and fit into thebuilding life cycle in a BIM-enabled industry Throughout the book, sample documents and figures help youbetter understand the principles of BIM and how it works inpractice. In addition, first-hand accounts show you exactlyhow adopters of BIM have gained a competitive edge. Architects, engineers, constructors, building owners, andfacility managers can turn to this book to realize the fullpotential of BIM and radically improve the way buildings aredesigned, built, operated, and maintained.

Download or read book The Relationship between Main Contractors and Subcontractors in the Zambian Construction Industry written by Tafadzwa Mudzvokorwa and published by GRIN Verlag. This book was released on 2017-07-10 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master's Thesis from the year 2016 in the subject Engineering - Civil Engineering, University of Zambia, course: Master of Engineering Project Management, language: English, abstract: In recent years there have been a substantial number of projects conducted in the Zambian construction industry. Due to the magnitude and complexity of many of these projects, contractors have resorted to subcontracting to share responsibilities and mitigate project risks. The Zambian government has also invigorated the practice of subcontracting in the construction industry as it plays an important role in increasing economy viability and building capacity. Instead of improving project success, subcontracting can act as a catalyst for poor project outcomes. Though there are many reasons that contribute to problems from subcontracting, a poor relationship between main contractors and subcontractors can be seen as a notorious contributor affecting construction works. The study aimed at investigating the relationship between the main contractors and subcontractors in the Zambian construction industry and recommend a framework that can be implemented to better the relationship. The study also examined the effects of a poor interface between main contractors and subcontractors in Zambia. Data collection techniques used included literature review, interviews and questionnaire surveys. The relative importance index was used to determine the ranking of the results of the study. Using the results adduced from the study a main contractor-subcontractor non-contractual partnering model was developed. The study established that the relationship between main contractors and subcontractors in Zambia is poor therefore needing attention. Interface problems were caused by payment issues, poor communication, unexpected price escalations and poor construction work. In order to address interface problems, the study found that there was need for better communication between the parties, timely payments and subcontractors’ access to labour and machinery. However, the study, had some limitations that need consideration when interpreting the results found. The limitations included scarcity of specific literature on subcontracting in the Zambian construction industry, the size of the sample only being limited to Lusaka. Nevertheless, these limitations could be addressed through further studies.

Download or read book Profitable Partnering in Construction Procurement written by Stephen Ogunlana and published by Routledge. This book was released on 2003-09-02 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of papers was presented at the CIB W92 Conference Harmony and Profit in Construction Procurement in Chiang Mai, Thailand (Jan 1999), by leading experts in construction contract procurement from 22 countries.

Download or read book Contractual Procedures in the Construction Industry written by Allan Ashworth and published by Routledge. This book was released on 2018-03-13 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contractual Procedures in the Construction Industry 7th edition aims to provide students with a comprehensive understanding of the subject, and reinforces the changes that are taking place within the construction industry. The book looks at contract law within the context of construction contracts, it examines the different procurement routes that have evolved over time and the particular aspects relating to design and construction, lean methods of construction and the advantages and disadvantages of PFI/PPP and its variants. It covers the development of partnering, supply chain management, design and build and the way that the clients and professions have adapted to change in the procurement of buildings and engineering projects. This book is an indispensable companion for students taking undergraduate courses in Building and Surveying, Quantity Surveying, Construction Management and Project Management. It is also suitable for students on HND/C courses in Building and Construction Management as well as foundation degree courses in Building and Construction Management. Key features of the new edition include: A revised chapter covering the concept of value for money in line with the greater emphasis on added value throughout the industry today. A new chapter covering developments in information technology applications (building information modelling, blockchains, data analytics, smart contracts and others) and construction procurement. Deeper coverage of the strategies that need to be considered in respect of contract selection. Improved discussion of sustainability and the increasing importance of resilience in the built environment. Concise descriptions of some the more important construction case laws.

Download or read book Construction Safety Management A Systems Approach Knowledge Management Edition written by Jose Perezgonzalez and published by Lulu.com. This book was released on 2005 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Knowledge Management edition, this book models safety management by transforming a common procedural model into a functional systems representation. This model offers clear graphic lines of influence of it's different components on organisational safety. The downloadable version is color-coded, as are the relevant illustrations.

Download or read book Knowledge Management and Information Tools for Building Maintenance and Facility Management written by Cinzia Talamo and published by Springer. This book was released on 2015-10-29 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the latest methods and tools for the management of information within facility management services and explains how it is possible to collect, organize, and use information over the life cycle of a building in order to optimize the integration of these services and improve the efficiency of processes. The coverage includes presentation and analysis of basic concepts, procedures, and international standards in the development and management of real estate inventories, building registries, and information systems for facility management. Models of strategic management are discussed and the functions and roles of the strategic management center, explained. Detailed attention is also devoted to building information modeling (BIM) for facility management and potential interactions between information systems and BIM applications. Criteria for evaluating information system performance are identified, and guidelines of value in developing technical specifications for facility management services are proposed. The book will aid clients and facility managers in ensuring that information bases are effectively compiled and used in order to enhance building maintenance and facility management.

Download or read book Modern Construction Management written by Prof. Frank Harris and published by John Wiley & Sons. This book was released on 2020-11-25 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: While the construction process still requires traditional skills, the dynamic nature of construction demands of its managers improved understanding of modern business, production and contractual practices. This well established, core undergraduate textbook reflects current best practice in the management of construction projects, with particular emphasis given to supply chains and networks, value and risk management, BIM, ICT, project arrangements, corporate social responsibility, training, health and welfare and environmental sustainability. The overall themes for the Eighth Edition Modern Construction Management are: Drivers for efficiency: lean construction underpinning production management and off-site production methods. Sustainability: reflecting the transition to a low carbon economy. Corporate Social Responsibility: embracing health & safety and employment issues. Modern contractual systems driving effective procurement Building Information Modelling directed towards the improvement of collaboration in construction management systems

Download or read book Construction Supply Chain Management written by Stephen Pryke and published by John Wiley & Sons. This book was released on 2009-09-15 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a unique appraisal of supply chain management(SCM) concepts alongside lessons from industry, observation andanalysis gathered during the first decade of supply chainmanagement strategies in the UK construction industry. The research from leading international academics has been drawntogether with the experience from some of the industry's foremostSCM practitioners to provide both a definition of SCM and anoverview of its development as a strategy for managing constructionprojects. Key case study material - from Slough Estates to BAA and T5 -illustrates the benefits to the industry of its adoption. Littlehas been written on the application of SCM to construction and thisbook provides an agenda for discussion for both the experiencedresearcher and the industry practitioner by offering a thoroughgrounding in its principles as well as an illustration of SCM as amethodology for industry. Construction Supply Chain Management studies makes animportant contribution to the debate on innovative systems andtheir significance in increasingly complex constructionprojects.

Download or read book Building Procurement written by Roy Morledge and published by John Wiley & Sons. This book was released on 2021-02-26 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: As an industrial process, construction is unique. The procurement processes used to achieve the successful completion of built assets requires a different approach to that adopted in most other industries, due to the design of buildings being bespoke and the sites being geographically varied. The procurement process is central to the success of any construction project and many of the problems which impact construction projects can be traced back to the procurement phase, so a good understanding of the methods of procurement, the development of a procurement strategy and the influence it has on project success is essential for all those working in the industry. Much has changed in the global construction industry since publication of the second edition of Building Procurement, for example the increase in debt burden of many major economies, widespread adoption of Building Information Modelling (BIM) Technology in the industry and the United Kingdom's exit from the European Union. This new edition has been rewritten to take account of these significant developments, but at its core it continues to provide a critical examination and review of current procurement practices in the UK, continental Europe (including EU procurement procedures), China, Middle East and Sub-Saharan Africa and the USA. It retains its original strong emphasis on the need for clients to establish achievable objectives which reflect the project business case and focuses on development of suitable strategies and management structures to meet those objectives in the current construction climate. Building Procurement will be essential reading for senior undergraduate and postgraduate students of construction management and practitioners working in all areas of construction management.