Download or read book Influence of Volutes on Characteristic Curves of Centrifugal Pumps written by F. Krisam and published by . This book was released on 1959 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hydrodynamics of Pumps written by Christopher E. Brennen and published by Cambridge University Press. This book was released on 2011-03-28 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrodynamics of Pumps is a reference for pump experts and a textbook for advanced students. It examines the fluid dynamics of liquid turbomachines, particularly pumps, focusing on special problems and design issues associated with the flow of liquid through a rotating machine. There are two characteristics of a liquid that lead to problems and cause a significantly different set of concerns than those in gas turbines. These are the potential for cavitation and the high density of liquids, which enhances the possibility of damaging, unsteady flows and forces. The book begins with an introduction to the subject, including cavitation, unsteady flows and turbomachinery, basic pump design and performance principles. Chapter topics include flow features, cavitation parameters and inception, bubble dynamics, cavitation effects on pump performance, and unsteady flows and vibration in pumps - discussed in the three final chapters. The book is richly illustrated and includes many practical examples.
Download or read book Centrifugal Pumps written by Johann Friedrich Gülich and published by Springer. This book was released on 2014-10-24 with total page 1146 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives an unparalleled, up-to-date, in-depth treatment of all kinds of flow phenomena encountered in centrifugal pumps including the complex interactions of fluid flow with vibrations and wear of materials. The scope includes all aspects of hydraulic design, 3D-flow phenomena and partload operation, cavitation, numerical flow calculations, hydraulic forces, pressure pulsations, noise, pump vibrations (notably bearing housing vibration diagnostics and remedies), pipe vibrations, pump characteristics and pump operation, design of intake structures, the effects of highly viscous flows, pumping of gas-liquid mixtures, hydraulic transport of solids, fatigue damage to impellers or diffusers, material selection under the aspects of fatigue, corrosion, erosion-corrosion or hydro-abrasive wear, pump selection, and hydraulic quality criteria. As a novelty, the 3rd ed. brings a fully analytical design method for radial impellers, which eliminates the arbitrary choices inherent to former design procedures. The discussions of vibrations, noise, unsteady flow phenomena, stability, hydraulic excitation forces and cavitation have been significantly enhanced. To ease the use of the information, the methods and procedures for the various calculations and failure diagnostics discussed in the text are gathered in about 150 pages of tables which may be considered as almost unique in the open literature. The text focuses on practical application in the industry and is free of mathematical or theoretical ballast. In order to find viable solutions in practice, the physical mechanisms involved should be thoroughly understood. The book is focused on fostering this understanding which will benefit the pump engineer in industry as well as academia and students.
Download or read book Effect of Impeller Design Changes on Characteristics of a Model Dredge Pump written by John B. Herbich and published by . This book was released on 1961 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study was primarily concerned with development of an efficient pump handling silt-clay-water mixtures. One phase of the study involved recommendations for design changes of the dredge pump, involving modifications in the volute and the impeller. In another phase of the study, model investigation of four differently modified impellers was performed with water as well as silt-claywater mixtures. The variables included discharge (0 - 1200 gallons per minute), speed (1150 to 1900 revolutions per minute), and liquid density (1000 to 1380 grams per liter). Preliminary analysis of the data indicates that certain modifications in the exit angle and vane shape of the impeller result in a marked increase in pump efficiency. (Author).
Download or read book Centrifugal Pumps written by Val S. Lobanoff and published by Elsevier. This book was released on 2013-10-22 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Centrifugal Pumps: Design and Application, Second Edition focuses on the design of chemical pumps, composite materials, manufacturing techniques employed in nonmetallic pump applications, mechanical seals, and hydraulic design. The publication first offers information on the elements of pump design, specific speed and modeling laws, and impeller design. Discussions focus on shape of head capacity curve, pump speed, viscosity, specific gravity, correction for impeller trim, model law, and design suggestions. The book then takes a look at general pump design, volute design, and design of multi-stage casing. The manuscript examines double-suction pumps and side-suction design, net positive suction head, and vertical pumps. Topics include configurations, design features, pump vibration, effect of viscosity, suction piping, high speed pumps, and side suction and suction nozzle layout. The publication also ponders on high speed pumps, double-case pumps, hydraulic power recovery turbines, and shaft design and axial thrust. The book is a valuable source of data for pump designers, students, and rotating equipment engineers.
Download or read book Coastal Deep Ocean Dredging written by John B. Herbich and published by . This book was released on 1975 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Centrifugal Pumps written by Igor Karassik and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 991 pages. Available in PDF, EPUB and Kindle. Book excerpt: This last, the education of pump users, is precisely what this book was intended to do. To what extent we must have achieved our purpose, our readers must decide. My good friend and associate, J. T. (Terry) McGuire, and I have been working very closely together for a long time. Our view of engineering problems and of their solutions coincide to an astonishing degree. When I was asked to prepare a second edition of my book Centrifugal Pumps, it was logical that I turned to Terry and suggested that he be my coauthor on this project. He agreed to do so, and his cooperation has been most valuable, both in improving the resultant work and in easing my burden. It would be presumptuous on my part to pretend that nothing has changed in the technology of centrifugal pumps during the 30 years since I prepared the manuscript for the first edition of this book. Let me, then, speak of some of these changes.
Download or read book Centrifugal Pumps written by Johann Friedrich Gülich and published by Springer Science & Business Media. This book was released on 2010-05-25 with total page 999 pages. Available in PDF, EPUB and Kindle. Book excerpt: Life is linked to liquid transport, and so are vital segments of economy. Pumping devices – be it the human heart, a boiler feeder or the cooling-water pump of a motorcar – are always part of a more or less complex system where pump failure can lead to severe consequences. To select, operate or even design a pump, some understanding of the system is helpful, if not essential. Depending on the appli- tion, a centrifugal pump can be a simple device which could be built in a garage with a minimum of know-how – or a high-tech machine requiring advanced skills, sophisticated engineering and extensive testing. When attempting to describe the state-of-the-art in hydraulic engineering of centrifugal pumps, the focus is nec- sarily on the high-tech side rather than on less-demanding services even though these make up the majority of pump applications. Centrifugal pump technology involves a broad spectrum of flow phenomena which have a profound impact on design and operation through the achieved ef- ciency, the stability of the head-capacity characteristic, vibration, noise, com- nent failure due to fatigue, as well as material damage caused by cavitation, - dro-abrasive wear or erosion corrosion. Operation and life cycle costs of pumping equipment depend to a large extent on how well these phenomena and the inter- tion of the pump with the system are understood.
Download or read book New York Review of the Telegraph and Telephone and Electrical Journal written by and published by . This book was released on 1915 with total page 1246 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1971 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design Fabrication and Performance of Wind Turbines 2020 written by Kyung Chun Kim and published by MDPI. This book was released on 2021-03-04 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue is a collection of twelve papers on the design and application of biomedical circuits and systems. We hope you enjoy reading this Special Issue and become inspired to address technological challenges toward helping the medical industry and biologists to increase the quality of life for humans, which is the main objective. Several topics have been highlighted: muscle electrostimulation, analog front-end (AFE) circuits, waveform generators, real-time velocimetry estimators, interference suppression, bio-signal encryption, IoT electronic nose, ultrasound image processing, noise in medical imaging, elbow actuators, and aids for visually impaired people. We are conscious about the very wide scope of biomedical circuits and systems applications, and that our contribution represents only a grain of sand, though we expect to be useful in contributing to the progress of knowledge in the field.
Download or read book Electrical Review written by and published by . This book was released on 1918 with total page 1108 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Standard Handbook for Mechanical Engineers written by and published by . This book was released on 1924 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Industrial Engineering written by George Worthington and published by . This book was released on 1918 with total page 1126 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mathematical Modelling of Energy Systems and Fluid Machinery written by Mirko Morini and published by MDPI. This book was released on 2021-06-04 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ongoing digitalization of the energy sector, which will make a large amount of data available, should not be viewed as a passive ICT application for energy technology or a threat to thermodynamics and fluid dynamics, in the light of the competition triggered by data mining and machine learning techniques. These new technologies must be posed on solid bases for the representation of energy systems and fluid machinery. Therefore, mathematical modelling is still relevant and its importance cannot be underestimated. The aim of this Special Issue was to collect contributions about mathematical modelling of energy systems and fluid machinery in order to build and consolidate the base of this knowledge.
Download or read book Standard Handbook for Electrical Engineers written by Frank Fuller Fowle and published by . This book was released on 1918 with total page 2026 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Irrigation Theory And Practice 2Nd Edn written by A M Michael and published by Vikas Publishing House. This book was released on 2009-11 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is a comprehensive treatise on Water Resources Development and Irrigation Management. For the last 30 years the book has enjoyed the status of an definitive textbook on the subject. It has now been thoroughly revised and updated, and thus substantially enlarged. In addition to the wholesale revision of the existing chapters, three new chapters have been added to the book, namely, Lift Irrigation Systems and their Design, Water Requirement of Crops and Irrigation Management, and Economic Evaluation of Irrigation Projects and Water Pricing Policy.
