Download or read book Influence of the Precipitation state on the Thermal Stability of Severely Deformed Aluminum Alloys written by Rolf Berghammer and published by Cuvillier Verlag. This book was released on 2014-10-29 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: A promising way to increase the strength of aluminum alloys is by grain refinement. Therefore the production of so-called ultra-fine grained (UFG) microstructures by severe plastic deformation (SPD) is a very interesting topic. One of the most common SPD processes is Equal Channel Angular Pressing (ECAP), which was compared to Confined Channel Die Pressing (CCDP) and cold rolling.In the focus of this work lays on the one hand the influence of different precipitation states on the formation of UFG structures and their influence on the mechanical properties and on the other hand it was examined if the thermal stability of these structures can be improved either by supersaturated solid solution(by impurity drag) or by precipitates (by grain boundary pinning).With a better understanding of the ongoing softening mechanisms a good combination of high strength and good ductility can be achievedby alternating SPD and heat treatment.
Download or read book Light Metals 2020 written by Alan Tomsett and published by Springer Nature. This book was released on 2020-01-28 with total page 1385 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Light Metals symposia at the TMS Annual Meeting & Exhibition present the most recent developments, discoveries, and practices in primary aluminum science and technology. The annual Light Metals volume has become the definitive reference in the field of aluminum production and related light metal technologies. The 2020 collection includes papers from the following symposia: • Alumina and Bauxite• Aluminum Alloys, Processing and Characterization• Aluminum Reduction Technology• Cast Shop Technology• Cast Shop Technology: Recycling and Sustainability Joint Session• Electrode Technology for Aluminum Production
Download or read book Heat Treatment and Plastic Deformation of Non Ferrous Alloys written by Tomasz Tański and published by Trans Tech Publications Ltd. This book was released on 2018-06-15 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special topic volume with invited peer reviewed papers only
Download or read book Metallic Films for Electronic Optical and Magnetic Applications written by Katayun Barmak and published by Woodhead Publishing. This book was released on 2014-02-13 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallic films play an important role in modern technologies such as integrated circuits, information storage, displays, sensors, and coatings. Metallic Films for Electronic, Optical and Magnetic Applications reviews the structure, processing and properties of metallic films. Part one explores the structure of metallic films using characterization methods such as x-ray diffraction and transmission electron microscopy. This part also encompasses the processing of metallic films, including structure formation during deposition and post-deposition reactions and phase transformations. Chapters in part two focus on the properties of metallic films, including mechanical, electrical, magnetic, optical, and thermal properties. Metallic Films for Electronic, Optical and Magnetic Applications is a technical resource for electronics components manufacturers, scientists, and engineers working in the semiconductor industry, product developers of sensors, displays, and other optoelectronic devices, and academics working in the field. - Explores the structure of metallic films using characterization methods such as x-ray diffraction and transmission electron microscopy - Discusses processing of metallic films, including structure formation during deposition and post-deposition reactions and phase transformations - Focuses on the properties of metallic films, including mechanical, electrical, magnetic, optical, and thermal properties
Download or read book Nanomaterials by Severe Plastic Deformation written by Michael J. Zehetbauer and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings of the "Second International Conference on Nanomaterials by Severe Plastic Deformation" review the enormous scientific avalanche that has been developing in the field over recent years. A valuable resource for any scientist and engineer working in this emerging field of nanotechnology.
Download or read book Light Metal Alloys Applications written by Waldemar Alfredo Monteiro and published by BoD – Books on Demand. This book was released on 2014-06-11 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lightweight alloys have become of great importance in engineering for construction of transportation equipment. At present, the metals that serve as the base of the principal light alloys are aluminum and magnesium. One of the most important lightweight alloys are the aluminum alloys in use for several applications (structural components wrought aluminum alloys, parts and plates). However, some casting parts that have low cost of production play important role in aircraft parts. Magnesium and its alloys are among the lightest of all metals and the sixth most abundant metal on earth. Magnesium is ductile and the most machinable of all metals. Many of these light weight alloys have appropriately high strength to warrant their use for structural purposes, and as a result of their use, the total weight of transportation equipment has been considerably decreased.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1991 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1972 with total page 882 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metals Abstracts written by and published by . This book was released on 1997 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aluminium Alloys written by Subbarayan Sivasankaran and published by BoD – Books on Demand. This book was released on 2017-12-21 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: The major issue of energy saving and conservation of the environment in the world is being emphasized to us to concentrate on lightweight materials in which aluminium alloys are contributing more in applications in the twenty-first century. Aluminium and its related materials possess lighter weight, considerable strength, more corrosion resistance and ductility. Especially from the past one decade, the use of aluminium alloys is increasing in construction field, transportation industries, packaging purposes, automotive, defence, aircraft and electrical sectors. Around 85% is being used in the form of wrought products, which replace the use of cast iron. Further, the major features of aluminium alloy are recyclability and its abundant availability in the world. In general, aluminium and its related materials are being processed via casting, drawing, forging, rolling, extrusion, welding, powder metallurgy process, etc. To improve the physical and mechanical properties, scientists are doing more research and adding some second-phase particles in to it called composites in addition to heat treatment. Therefore, to explore more in this field, the present book has been aimed and focused to bridge all scientists who are working in this field. The main objective of the present book is to focus on aluminium, its alloys and its composites, which include, but are not limited to, the various processing routes and characterization techniques in both macro- and nano-levels.
Download or read book Materials Design and Manufacturing for Lightweight Vehicles written by P.K. Mallick and published by Elsevier. This book was released on 2010-03-01 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research into the manufacture of lightweight automobiles is driven by the need to reduce fuel consumption to preserve dwindling hydrocarbon resources without compromising other attributes such as safety, performance, recyclability and cost. Materials, design and manufacturing for lightweight vehicles will make it easier for engineers to not only learn about the materials being considered for lightweight automobiles, but also to compare their characteristics and properties.Part one discusses materials for lightweight automotive structures with chapters on advanced steels for lightweight automotive structures, aluminium alloys, magnesium alloys for lightweight powertrains and automotive structures, thermoplastics and thermoplastic matrix composites and thermoset matrix composites for lightweight automotive structures. Part two reviews manufacturing and design of lightweight automotive structures covering topics such as manufacturing processes for light alloys, joining for lightweight vehicles, recycling and lifecycle issues and crashworthiness design for lightweight vehicles.With its distinguished editor and renowned team of contributors, Materials, design and manufacturing for lightweight vehicles is a standard reference for practicing engineers involved in the design and material selection for motor vehicle bodies and components as well as material scientists, environmental scientists, policy makers, car companies and automotive component manufacturers. - Provides a comprehensive analysis of the materials being used for the manufacture of lightweight vehicles whilst comparing characteristics and properties - Examines crashworthiness design issues for lightweight vehicles and further emphasises the development of lightweight vehicles without compromising safety considerations and performance - Explores the manufacturing process for light alloys including metal forming processes for automotive applications
Download or read book Light Metals 2015 written by Margaret Hyland and published by John Wiley & Sons. This book was released on 2015-02-18 with total page 1303 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2015 collection will include papers from the following symposia: Alumina and Bauxite Aluminum Alloys: Fabrication, Characterization and Applications Aluminum Processing Aluminum Reduction Technology Cast Shop for Aluminum Production Electrode Technology for Aluminum Production Strip Casting of Light Metals
Download or read book Bulk Nanostructured Materials written by Ruslan Z. Valiev and published by John Wiley & Sons. This book was released on 2013-09-17 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the most recent results in the area of bulk nanostructured materials and new trends in their severe plastic deformation (SPD) processing, where these techniques are now emerging from the domain of laboratory-scale research into the commercial production of various bulk nanomaterials. Special emphasis is placed on an analysis of the effect of nanostructures in materials fabricated by SPD on mechanical properties (strength and ductility, fatigue strength and life, superplasticity) and functional behavior (shape memory effects, magnetic and electric properties), as well as the numerous examples of their innovative applications. There is a high innovation potential for industrial applications of bulk nanomaterials for structural use (materials with extreme strength) as well as for functional applications such as nanomagnets, materials for hydrogen storage, thermoelectric materials, superconductors, catalysts, and biomedical implants.
Download or read book Physics Briefs written by and published by . This book was released on 1993 with total page 1058 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Extrusion of Aluminium Alloys written by T. Sheppard and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years the importance of extruded alloys has increased due to the decline in copper extrusion, increased use in structural applications, environmental impact and reduced energy consumption. There have also been huge technical advances. This text provides comprehensive coverage of the metallurgical, mathematical and practical features of the process.
Download or read book Fundamentals of Aluminium Metallurgy written by Roger Lumley and published by Elsevier. This book was released on 2010-11-25 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aluminium is an important metal in manufacturing, due to its versatile properties and the many applications of both the processed metal and its alloys in different industries. Fundamentals of aluminium metallurgy provides a comprehensive overview of the production, properties and processing of aluminium, and its applications in manufacturing industries.Part one discusses different methods of producing and casting aluminium, covering areas such as casting of alloys, quality issues and specific production methods such as high-pressure diecasting. The metallurgical properties of aluminium and its alloys are reviewed in Part two, with chapters on such topics as hardening, precipitation processes and solute partitioning and clustering, as well as properties such as fracture resistance. Finally, Part three includes chapters on joining, laser sintering and other methods of processing aluminium, and its applications in particular areas of industry such as aerospace.With its distinguished editor and team of expert contributors, Fundamentals of aluminium metallurgy is a standard reference for researchers in metallurgy, as well as all those involved in the manufacture and use of aluminium products. - Provides a comprehensive overview of the production, properties and processing of aluminium, and its applications in manufacturing industries - Considers many issues of central importance in aluminium production and utilization considering quality issues and design for fatigue growth resistance - Metallurgical properties of aluminium and its alloys are further explored with particular reference to work hardening and applications of industrial alloys
Download or read book Elements of Metallurgy and Engineering Alloys written by Flake C. Campbell and published by ASM International. This book was released on 2008-01-01 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical reference provides thorough and systematic coverage on both basic metallurgy and the practical engineering aspects of metallic material selection and application.
