Download or read book Influence of Surface on Ceramic Mechanical Properties written by George R. Pulliam and published by . This book was released on 1959 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mechanical Properties of Ceramics written by John B. Wachtman and published by John Wiley & Sons. This book was released on 2009-08-13 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Comprehensive and Self-Contained Treatment of the Theory and Practical Applications of Ceramic Materials When failure occurs in ceramic materials, it is often catastrophic, instantaneous, and total. Now in its Second Edition, this important book arms readers with a thorough and accurate understanding of the causes of these failures and how to design ceramics for failure avoidance. It systematically covers: Stress and strain Types of mechanical behavior Strength of defect-free solids Linear elastic fracture mechanics Measurements of elasticity, strength, and fracture toughness Subcritical crack propagation Toughening mechanisms in ceramics Effects of microstructure on toughness and strength Cyclic fatigue of ceramics Thermal stress and thermal shock in ceramics Fractography Dislocation and plastic deformation in ceramics Creep and superplasticity of ceramics Creep rupture at high temperatures and safe life design Hardness and wear And more While maintaining the first edition's reputation for being an indispensable professional resource, this new edition has been updated with sketches, explanations, figures, tables, summaries, and problem sets to make it more student-friendly as a textbook in undergraduate and graduate courses on the mechanical properties of ceramics.

Download or read book Mechanical Properties and Performance of Engineering Ceramics and Composites V written by Dileep Singh and published by John Wiley & Sons. This book was released on 2010-11-23 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is a compilation of papers presented in the Mechanical Behavior and Performance of Ceramics & Composites symposium during the 34th International Conference & Exposition on Advanced Ceramics and Composites (ICACC) held January 24-29, 2010, in Daytona Beach, Florida. The Mechanical Behavior and Performance of Ceramics & Composites symposium was one of the largest symposia in terms of the number (>100) of presentations at the ICACC’10. This symposium covered wide ranging and cutting-edge topics on mechanical properties and reliability of ceramics and composites and their correlations to processing, microstructure, and environmental effects. Symposium topics included: • Ceramics and composites for engine applications • Design and life prediction methodologies • Environmental effects on mechanical properties • Mechanical behavior of porous ceramics • Ultra high temperature ceramics • Ternary compounds • Mechanics & characterization of nanomaterials and devices • Novel test methods and equipment • Processing - microstructure - mechanical properties correlations • Ceramics & composites joining and testing • NDE of ceramic components

Download or read book Effects of Surface Finishing on Mechanical and Other Physical Properties of Ceramics written by Robert J. Stokes and published by . This book was released on 1970 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: The report reviews the effects of mechanical finishing operations on the physical properties of ceramics. Ceramic machining results in a defective surface containing cracks, dislocations, point defects and residual stresses. The relative significance of these defects depends on the physical property of interest. The mechanical properties of single crystals are sensitive to dislocations (semi-brittle) and surface cracks (brittle); the mechanical properties of polycrystals are sensitive to surface cracks; the electrical properties of semiconductors are sensitive to surface trapping sites; magnetic, piezoelectric and optical properties are particularly sensitive to residual stresses. To optimize physical properties these defects must be eliminated by mechanical lapping, chemical etching or thermal annealing. (Author).

Download or read book Mechanical Properties and Microstructure of Selected All ceramic Materials and the Influence of Porcelain Surface Treatment and Heat Treatment on Their Flexural Strength written by Massimiliano Guazzato and published by . This book was released on 2003 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Surfaces and Interfaces in Ceramic and Ceramic Metal Systems written by Joseph Pask and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 733 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 17th University Conference on Ceramics, which also was the 7th LBL/MMRD International Materials Symposium, was held on the campus of the University of California at Berkeley from July 28 to August 1, 1980. It was devoted to the subject of surfaces and interfaces in ceramic and ceramic-metal systems. The program was timely and of great interest, as indicated by the large number of contributed papers, which included contributions from ten foreign countries. These proceedings are divided into the following categories dealing with the chemistry and physics of interfaces: calculations of interface/surface states, characterization of surfaces and inter faces, thermodynamics of interfaces, influence of surface and inter faces on selected ceramic processes, grain boundary structures, effects of grain boundaries on deformation and fracture, interfacial phenomena, formation of interfaces, development of adhesion, and reactions at interfaces. A number of papers deal specifically with the Si-Si02 interface, which probably has received more attention than any other because of its importance in the electronics industry. This coverage fulfills the principal objective of the symposium which was to explore and assess the current fundamental understand ing of interfaces and surfaces. A parallel objective of the symposium was fulfilled by a group of papers dealing with the correlation of interfacial characteris tics with mechanical behavior. This group includes papers dealing with the adherence of dissimilar materials at interfaces.

Download or read book Mechanical Properties of Ceramics and Composites written by Roy W. Rice and published by CRC Press. This book was released on 2000-04-18 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive review, evaluation, and summary of the dependence of mechanical properties on grain and particle parameters of monolithic ceramics and ceramic composites. Emphasizing the critical link between fabrication and ceramic performance, the book covers the grain dependence of monolithic properties and the dependence of ceramic, composite properties on grain and particulate parameters. It includes theoretical and conceptual background, pertinent models, experimental results, a data review, discussion, and a summary or recommendations. Illustrations feature microstructural details while graphs plot data on material hardness, compressive strength, and other pivotal variables.

Download or read book Mechanical and Thermal Properties of Ceramics written by J. B. Wachtman and published by . This book was released on 1969 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mechanical Properties and Performance of Engineering Ceramics and Composites IV Volume 30 Issue 2 written by Dileep Singh and published by John Wiley & Sons. This book was released on 2009-12-15 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gain insight into the mechanical properties and performance of engineering ceramics and composites. This collection of articles illustrates the Mechanical Behavior and Performance of Ceramics & Composites symposium, which included over 100 presentations representing 10 countries. The symposium addressed the cutting-edge topics on mechanical properties and reliability of ceramics and composites and their correlations to processing, microstructure, and environmental effects.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mechanical Properties of Ceramics and Composites written by Roy W. Rice and published by CRC Press. This book was released on 2000-04-18 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive review, evaluation, and summary of the dependence of mechanical properties on grain and particle parameters of monolithic ceramics and ceramic composites. Emphasizing the critical link between fabrication and ceramic performance, the book covers the grain dependence of monolithic properties and the dependence of c

Download or read book Mechanical Properties and Performance of Engineering Ceramics and Composites IX Volume 35 Issue 2 written by Dileep Singh and published by John Wiley & Sons. This book was released on 2014-11-18 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Ceramic Engineering and Science Proceeding has been published by The American Ceramic Society since 1980. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.

Download or read book Surfaces and Interfaces in Ceramic and Ceramic Metal Systems written by Joseph Pask and published by Springer. This book was released on 2012-07-10 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 17th University Conference on Ceramics, which also was the 7th LBL/MMRD International Materials Symposium, was held on the campus of the University of California at Berkeley from July 28 to August 1, 1980. It was devoted to the subject of surfaces and interfaces in ceramic and ceramic-metal systems. The program was timely and of great interest, as indicated by the large number of contributed papers, which included contributions from ten foreign countries. These proceedings are divided into the following categories dealing with the chemistry and physics of interfaces: calculations of interface/surface states, characterization of surfaces and inter faces, thermodynamics of interfaces, influence of surface and inter faces on selected ceramic processes, grain boundary structures, effects of grain boundaries on deformation and fracture, interfacial phenomena, formation of interfaces, development of adhesion, and reactions at interfaces. A number of papers deal specifically with the Si-Si02 interface, which probably has received more attention than any other because of its importance in the electronics industry. This coverage fulfills the principal objective of the symposium which was to explore and assess the current fundamental understand ing of interfaces and surfaces. A parallel objective of the symposium was fulfilled by a group of papers dealing with the correlation of interfacial characteris tics with mechanical behavior. This group includes papers dealing with the adherence of dissimilar materials at interfaces.

Download or read book Mechanical Properties and Performance of Engineering Ceramics and Composites IV written by Jonathan Salem and published by John Wiley & Sons. This book was released on 2009-02-11 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a one-stop resource with current research on advanced ceramics. It is a collection of papers from The American Ceramic Society s 32nd International Conference on Advanced Ceramics and Composites, January 27-February 1, 2008. Topics include Processing-Microstructure-Mechanical Properties Correlations; Mechanical Performance of Ternary Compounds; Mechanical Performance of Ultra-High Temperature Ceramics; and more. Articles are logically organized to provide insight into various aspects of ceramic materials and advanced ceramics. This is a valuable, up-to-date resource for researchers working in ceramics engineering.

Download or read book The Role of Grain Boundaries and Surfaces in Ceramics written by W. Wurth Kriegel and published by Springer. This book was released on 1966 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Processing and Properties of Advanced Ceramics and Composites II written by Narottam P. Bansal and published by John Wiley & Sons. This book was released on 2010-10-01 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Three international symposia “Innovative Processing and Synthesis of Ceramics, Glasses and Composites”, “Ceramic Matrix Composites”, and “Microwave Processing of Ceramics” were held during Materials Science & Technology 2009 Conference & Exhibition (MS&T’09), Pittsburgh, PA, October 25-29, 2009. These symposia provided an international forum for scientists, engineers, and technologists to discuss and exchange state-of-the-art ideas, information, and technology on advanced methods and approaches for processing, synthesis and characterization of ceramics, glasses, and composites. A total of 83 papers, including 20 invited talks, were presented in the form of oral and poster presentations. Authors from 19 countries (Austria, Belarus, Brazil, Bulgaria, Canada, China, Egypt, France, Germany, India, Iran, Italy, Japan, Russia, South Korea, Taiwan, Turkey, U.K., and the United States) participated. The speakers represented universities, industries, and government research laboratories.

Download or read book Precursor Derived Ceramics written by Joachim Bill and published by John Wiley & Sons. This book was released on 2008-07-11 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: The production of high-purity ceramic materials from low-molecular weight, inorganic or organoelement precursors is a topic of increasing relevance within materials science. With this emerging technology it is possible to precisely tailor the properties of the ceramic material which enables new high-temperature or electronic applications. Every materials scientist and engineer involved in the research and development of new high-performance ceramic materials will find these results - presented at a recent workshop of the Max-Planck-Gesellschaft - of great importance for his own work.