Download or read book Influence of Imperfections and Edge Restraint on the Buckling of Axially Compressed Cylinders written by Bo O. Almroth and published by . This book was released on 1966 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent investigations on the influence of edge conditions on the critical axial load of cylindrical shells are extended here to include cylinders with elastic edge restraint. It is shown that weak edge conditions are unlikely to affect the critical load significantly in experiments or in practice. Also the effects of symmetric initial imperfections were investigated. The critical load for cylinders with initial imperfections in the form of a cosine function was found to be somewhat lower than was indicated in a previous analysis by Koiter. The analysis also disclosed that very short cylinders would not be sensitive to the types of imperfections which were considered. A few tests were performed and their results tend to support this conclusion.
Download or read book Buckling Experiments Experimental Methods in Buckling of Thin Walled Structures Volume 2 written by Josef Singer and published by John Wiley & Sons. This book was released on 2002-08-12 with total page 1140 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Edited by Josef Singer, the world's foremost authority on structural buckling. * Time-saving and cost-effective design data for all structural, mechanical, and aerospace engineering researchers.
Download or read book NASA Technical Note written by and published by . This book was released on 1971 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stability Analysis of Plates and Shells written by and published by . This book was released on 1998 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Buckling of Structures written by I. Elishakoff and published by Elsevier. This book was released on 2013-10-22 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of papers, written by friends and colleagues of Josef Singer, presents a comprehensive and timely review of the theoretical mechanics of thin shell-structures. Topics of great current interest such as the buckling of composite plates and shells, the plastic buckling of thin-walled structures and the optimum design of buckling sensitive curved composite panels are examined by experts, using a great diversity of approaches, whereby theoretical predictions are compared with experimental results whenever possible.Other topics reviewed include the buckling and post-buckling behaviour of imperfect shells under different external static or dynamic loads and a variety of boundary conditions. Papers dealing with the vibration and the dynamic response of thin elastic bodies are also presented.A strong emphasis is made on the practical applications aspect in the theories presented. Thus engineers, research workers and students who are involved with the design and analysis of shell structures made of different materials, and subjected to various static and dynamic loads will find this volume an invaluable source of reference.
Download or read book NASA Scientific and Technical Reports written by United States. National Aeronautics and Space Administration Scientific and Technical Information Division and published by . This book was released on 1967 with total page 2300 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1966 with total page 1348 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Flutter Vibration and Buckling of Truncated Orthotropic Conical Shells with Generalized Elastic Edge Restraint written by Sidney C. Dixon and published by . This book was released on 1970 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Buckling Load of Thin Circular Cylindrical Shells Formed by Plastic Expansion written by LeRoy R. Guist and published by . This book was released on 1971 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: An experimental investigation was made to determine the axial buckling load of cylinders formed by a process of plastic expansion due to internal pressure. Test cylinders 21.6 cm in diameter, 0.330 mm thick, were formed by plastic expansion from 15.23 cm diameter commercial, welded, type 304 stainless steel tubing. Buckling loads from 50 to 71 percent of the classical value showed a definite relationship with the local decrease in curvature due to the worst imperfections. Buckling loads were substantially higher than expected in relation to the amplitude of their geometric imperfections. The results indicate that the process of plastic expansion may provide a means of producing certain types of cylinders of unusually high buckling load at low cost.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1972 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stability and Vibrations of Thin Walled Composite Structures written by Haim Abramovich and published by Woodhead Publishing. This book was released on 2017-05-29 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stability and Vibrations of Thin-Walled Composite Structures presents engineering and academic knowledge on the stability (buckling and post buckling) and vibrations of thin walled composite structures like columns, plates, and stringer stiffened plates and shells, which form the basic structures of the aeronautical and space sectors. Currently, this knowledge is dispersed in several books and manuscripts, covering all aspects of composite materials. The book enables both engineers and academics to locate valuable, up-to-date knowledge on buckling and vibrations, be it analytical or experimental, and use it for calculations or comparisons. The book is also useful as a textbook for advanced-level graduate courses. - Presents a unified, systematic, detailed and comprehensive overview of the topic - Contains contributions from leading experts in the field - Includes a dedicated section on testing and experimental results
Download or read book Buckling of Thin Metal Shells written by J.G. Teng and published by CRC Press. This book was released on 2006-06-28 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin-walled metal shell structures are highly efficient in their use of material, but they are particularly sensitive to failure by buckiling. Many different forms of buckling can occur for different geometries and different loading conditions. Because this field of knowledge is both complex and industrially important, it is of great interest and concern in a wide range of industries. This book presents a compilation and synthesis of a wealth of research, experience and knowledge of the subject. Information that was previously widely scattered throughout the literature is assembled in a concise and convenient form that is easy to understand, and state-of-the-art research findings are thoroughly examined. This book is useful for those involved in the structural design of silos, tanks, pipelines, biodigestors, chimneys, towers, offshore platforms, aircraft and spacecraft. Buckling of Thin Metal Shells is essential reading for designers, researchers and code writers involved with thin-walled metal shell structures.
Download or read book A Selected Listing of NASA Scientific and Technical Reports for written by United States. National Aeronautics and Space Administration. Scientific and Technical Information Division and published by . This book was released on 1966 with total page 2088 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Selected Listing of NASA Scientific and Technical Reports for 1966 written by United States. National Aeronautics and Space Administration. Scientific and Technical Information Division and published by . This book was released on 1967 with total page 2084 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Government wide Index to Federal Research Development Reports written by and published by . This book was released on 1966 with total page 1016 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Experimental analysis of instability problems on reduced and full scale models written by and published by . This book was released on 1971 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Acta Technica written by and published by . This book was released on 1978 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt:
