Download or read book Influence de la microstructure sur le comportement local dans les aciers 16MND5 written by Seddik Sekfali and published by . This book was released on 2004 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: L'acier 16MND5 ou A508 C13 est utilisé pour la fabrication par forgeage des cuves de réacteurs nucléaires à eau sous pression. Ce matériau présente un bon compromis en terme de ténacité et de limite d'élasticité, sa microstructure est principalement bainitique revenue. Du fait de la variation locale de la composition chimique et du procédé d'élaboration, ce matériau présente des hétérogénéités microstructurales qui peuvent modifier localement les propriétés du point de vue de l'endommagement. En particulier, certaines zones présentent une microstructure martensitique dont les propriétés à la rupture sont différentes de celles de la bainite. Le but de cette thèse est d'apporter quelques éclaircissements sur l'influence de la microstructure; plus particulièrement, la taille des entités cristallographiques et leur distribution spatiale sur le comportement local de l'acier 16MND5. Deux microstructures ont été élaborées à cet effet ; une microstructure bainitique revenue et une microstructure martensitique revenue. Une caractérisation expérimentale a été réalisée sur les deux microstructures afin de déterminer la morphologie, la distribution spatiale des orientations cristallographiques et le comportement en traction. Un dépôt de grille a été effectué sur des éprouvettes de traction plates pour permettre de déterminer le champ déformation expérimental sur une zone préalablement analysée en EBSD. La détermination du comportement en traction a permis l'identification, à l'aide d'une méthode inverse, d'une loi de comportement multicristalline faisant intervenir la densité de dislocation sur chaque système de glissement. Cette loi de comportement a été utilisée dans des simulations à l'aide de la méthode des éléments finis pour simuler le comportement des deux microstructures en traction et comparer aux champs de déformations expérimentaux de celles-ci. Il en résulte une bonne adéquation entre les simulations et les expériences et la mise en évidence de l'influence de l'orientation des grains voisins sur le comportement local
Download or read book Etude de l influence de la microstructure sur le comportement la corrosion de quelques aciers soudables written by and published by . This book was released on 1964 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Etude de l influence de la microstructure sur le comportement la corrosion de quelques aciers soudables written by Orlando de Castro and published by . This book was released on 1964 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bifurcation and Stability of Dissipative Systems written by Q.S. Nguyen and published by Springer. This book was released on 2014-05-04 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first theme concerns the plastic buckling of structures in the spirit of Hill’s classical approach. Non-bifurcation and stability criteria are introduced and post-bifurcation analysis performed by asymptotic development method in relation with Hutchinson’s work. Some recent results on the generalized standard model are given and their connection to Hill’s general formulation is presented. Instability phenomena of inelastic flow processes such as strain localization and necking are discussed. The second theme concerns stability and bifurcation problems in internally damaged or cracked colids. In brittle fracture or brittle damage, the evolution law of crack lengths or damage parameters is time-independent like in plasticity and leads to a similar mathematical description of the quasi-static evolution. Stability and non-bifurcation criteria in the sense of Hill can be again obtained from the discussion of the rate response.
Download or read book Thermal Hydraulics of Water Cooled Nuclear Reactors written by Francesco D'Auria and published by Woodhead Publishing. This book was released on 2017-05-18 with total page 1200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Hydraulics of Water-Cooled Nuclear Reactors reviews flow and heat transfer phenomena in nuclear systems and examines the critical contribution of this analysis to nuclear technology development. With a strong focus on system thermal hydraulics (SYS TH), the book provides a detailed, yet approachable, presentation of current approaches to reactor thermal hydraulic analysis, also considering the importance of this discipline for the design and operation of safe and efficient water-cooled and moderated reactors. Part One presents the background to nuclear thermal hydraulics, starting with a historical perspective, defining key terms, and considering thermal hydraulics requirements in nuclear technology. Part Two addresses the principles of thermodynamics and relevant target phenomena in nuclear systems. Next, the book focuses on nuclear thermal hydraulics modeling, covering the key areas of heat transfer and pressure drops, then moving on to an introduction to SYS TH and computational fluid dynamics codes. The final part of the book reviews the application of thermal hydraulics in nuclear technology, with chapters on V&V and uncertainty in SYS TH codes, the BEPU approach, and applications to new reactor design, plant lifetime extension, and accident analysis. This book is a valuable resource for academics, graduate students, and professionals studying the thermal hydraulic analysis of nuclear power plants and using SYS TH to demonstrate their safety and acceptability. - Contains a systematic and comprehensive review of current approaches to the thermal-hydraulic analysis of water-cooled and moderated nuclear reactors - Clearly presents the relationship between system level (top-down analysis) and component level phenomenology (bottom-up analysis) - Provides a strong focus on nuclear system thermal hydraulic (SYS TH) codes - Presents detailed coverage of the applications of thermal-hydraulics to demonstrate the safety and acceptability of nuclear power plants
Download or read book Low energy Dislocation Structures written by M. Nabil Bassim and published by . This book was released on 1986 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book In Vessel Melt Retention and Ex Vessel Corium Cooling IAEA Tecdoc No 1906 written by International Atomic Energy Agency and published by International Atomic Energy Agency. This book was released on 2020-08-06 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication results from a technical meeting on phenomenology and technologies relevant to in-vessel melt retention (IVMR) and ex-vessel corium cooling (EVCC). The purpose of the publication is to capture the state of knowledge, at the time of that meeting, related to phenomenology and technologies as well as the challenges and pending issues relevant to IVMR and EVCC for water cooled reactors by summarizing the information provided by the meeting participants in a form useful to practitioners in Member States.
Download or read book Fatigue of Materials and Structures written by Claude Bathias and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of mechanical structures with improved and predictable durability cannot be achieved without a thorough understanding of the mechanisms of fatigue damage and more specifically the relationships between the microstructure of materials and their fatigue properties. Written by leading experts in the field, this book (which is complementary to Fatigue of Materials and Structures: Application to Damage and Design, also edited by Claude Bathias and André Pineau), provides an authoritative, comprehensive and unified treatment of the mechanics and micromechanisms of fatigue in metals, polymers and composites. Each chapter is devoted to one of the major classes of materials or to different types of fatigue damage, thereby providing overall coverage of the field. The book deals with crack initiation, crack growth, low-cycle fatigue, gigacycle fatigue, shorts cracks, fatigue micromechanisms and the local approach to fatigue damage, corrosion fatigue, environmental effects and variable amplitude loadings, and will be an important and much used reference for students, practicing engineers and researchers studying fracture and fatigue in numerous areas of mechanical, structural, civil, design, nuclear, and aerospace engineering as well as materials science.
Download or read book Multi mechanism Modeling of Inelastic Material Behavior written by Georges Cailletaud and published by John Wiley & Sons. This book was released on 2018-03-13 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on a particular class of models (namely Multi-Mechanism models) and their applications to extensive experimental data base related to different kind of materials. These models (i) are able to describe the main mechanical effects in plasticity, creep, creep/plasticity interaction, ratcheting extra-hardening under non-proportional loading (ii) provide local information (such us local stress/strain fields, damage, ….). A particular attention is paid to the identification process of material parameters. Moreover, finite element implementation of the Multi-Mechanism models is detailed.
Download or read book Non Linear Mechanics of Materials written by Jacques Besson and published by Springer Science & Business Media. This book was released on 2009-11-25 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: In mechanical engineering and structural analysis there is a significant gap between the material models currently used by engineers for industry applications and those already available in research laboratories. This is especially apparent with the huge progress of computational possibilities and the corresponding dissemination of numerical tools in engineering practice, which essentially deliver linear solutions. Future improvements of design and life assessment methods necessarily involve non-linear solutions for inelastic responses, in plasticity or viscoplasticity, as well as damage and fracture analyses. The dissemination of knowledge can be improved by software developments, data base completion and generalization, but also by information and training. With such a perspective Non-Linear Mechanics of Materials proposes a knowledge actualization, in order to better understand and use recent material constitutive and damage modeling methods in the context of structural analysis or multiscale material microstructure computations.
Download or read book Temperature Fatigue Interaction written by L. Remy and published by Elsevier. This book was released on 2002-03-11 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains a selection of peer-reviewed papers presented at the International Conference on Temperature-Fatigue Interaction, held in Paris, May 29-31, 2001, organised by the Fatigue Committee of the Societé Française de Métallurgie et de Matériaux (SF2M), under the auspices of the European Structural Integrity Society. The conference disseminated recent research results and promoting the interaction and collaboration amongst materials scientists, mechanical engineers and design engineers. Many engineering components and structures used in the automotive, aerospace, power generation and many other industries experience cyclic mechanical loads at high temperature or temperature transients causing thermally induced stresses. The increase of operating temperature and thermal mechanical loading trigger the interaction with time-dependent phenomena such as creep and environmental effects (oxidation, corrosion). A large number of metallic materials were investigated including aluminium alloys for the automotive industry, steels and cast iron for the automotive industry and materials forming, stainless steels for power plants, titanium, composites, intermetallic alloys and nickel base superalloys for aircraft industry, polymers. Important progress was observed in testing practice for high temperature behaviour, including environment and thermo-mechanical loading as well as in observation techniques. A large problem which was emphasized is to know precisely service loading cycles under non-isothermal conditions. This was considered critical for numerous thermal fatigue problems discussed in this conference.
Download or read book Electrostatic Levitator written by and published by . This book was released on 1999 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Mechanical Behaviour Plasticity and Damage written by D. Miannay and published by Elsevier. This book was released on 2000-11-03 with total page 755 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its inception in 1991, EUROMAT has been held each year on behalf of the Federation of European Materials Societies (FEMS), and alternates between general and topical prospectives. This year's theme, Advances in Mechanical Behaviour, Plasticity and Damage, was proposed by the Societe Francaise de Metallurgie et de Materiaux (SF2M) to FEMS.This publication contains a selection of papers presented at the EUROMAT 2000 Conference, held in Tours, France on 7-9 November 2000. The aim of this Conference was to concentrate mainly on recent advances made in the investigation of the relationship between microstructures of materials and their mechanical behaviour; including, fundamentals, modelling and applications. Encompassed in the Conference's aim is the nurturing of the synergistic effect between the theoretical and applied areas in this field. This was achieved by addressing important basic and practical aspects of the mechanical behaviour and damage of materials whilst also providing significant links between various complementary approaches. All kinds of materials are covered and topics that were covered include the mechanics of solid polymers, microstructurs and micromechanisms, and the collective behavior of defects which looks at the interaction of multiple defects in a system.
Download or read book Numerical Methods in Contact Mechanics written by Vladislav A. Yastrebov and published by John Wiley & Sons. This book was released on 2013-02-13 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational contact mechanics is a broad topic which brings together algorithmic, geometrical, optimization and numerical aspects for a robust, fast and accurate treatment of contact problems. This book covers all the basic ingredients of contact and computational contact mechanics: from efficient contact detection algorithms and classical optimization methods to new developments in contact kinematics and resolution schemes for both sequential and parallel computer architectures. The book is self-contained and intended for people working on the implementation and improvement of contact algorithms in a finite element software. Using a new tensor algebra, the authors introduce some original notions in contact kinematics and extend the classical formulation of contact elements. Some classical and new resolution methods for contact problems and associated ready-to-implement expressions are provided. Contents: 1. Introduction to Computational Contact. 2. Geometry in Contact Mechanics. 3. Contact Detection. 4. Formulation of Contact Problems. 5. Numerical Procedures. 6. Numerical Examples. About the Authors Vladislav A. Yastrebov is a postdoctoral-fellow in Computational Solid Mechanics at MINES ParisTech in France. His work in computational contact mechanics was recognized by the CSMA award and by the Prix Paul Caseau of the French Academy of Technology and Electricité de France.
Download or read book Superalloys 2016 written by Mark C. Hardy and published by Wiley-TMS. This book was released on 2016-10-03 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the Proceedings 13th International Symposium on Superalloys
Download or read book Microplasticity written by Charles J. McMahon and published by . This book was released on 1968 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Liquid Metals and Alloys written by Lars Arnberg and published by . This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The research on metals in their liquid state has been underestimated for a long time and the specific literature was scarce compared to those regarding solid metals. In the last twenty years, the situation has progressively changed and the matter has emerged as a fundamental area of investigation for physicists, metallurgists and materials scientists with consequent achievement of relevant results both on basic and applicative aspects. Today the description and the characterisation of molten metals and alloys is a wide and interdisciplinary topic and involves different approaches, from physics to technology, from processing to modelling.The book is structured in review and research papers and offers the state-of-the-art information on physics, technological properties, processing and modelling of physical and technological behaviour of liquid metals and alloys
