Download or read book Infill written by Adam Mornement and published by Laurence King Publishing. This book was released on 2009-02-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Urban land is an increasingly precious commodity, particularly in the centers of major cities. Every spare corner of land is in demand, however small, inaccessible, or awkwardly shaped. For architects the challenge is to optimize these sites while simultaneously negotiating the web of planning regulations to create homes suited to today's lifestyles. Infill profiles 39 innovative and imaginative urban dwellings around the world that fill in gaps left bydemolition, or that have been squeezed into plots previously considered unsuitable for development. Each case study is illustrated with photographs, drawings, and specially drawn site plans, all accompanied by authoritative commentary.The authors focus particularly on the challenges that each architect faced and how they were overcome.

Download or read book Modern American Housing written by Peggy Tully and published by Princeton Architectural Press. This book was released on 2013-06-25 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern American Housing brings together the most enlightened thinkers from the worlds of architecture, social practice, and real estate development to present the latest developments in the design and construction of new housing stock in re-urbanizing cities throughout the United States. New housing is grouped into three sections—housing towers, reused historical structures, and urban infill—and documented with photographs, pre-construction renderings, floor plans, and maps indicating location in urban settings. An accompanying essay and a discussion with urban planners, architects, and policymakers round out this fresh look at the past and future of the American house.

Download or read book Developing Successful Infill Housing written by Diane R. Suchman and published by . This book was released on 2002 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn how to develop profitable, market-rate infill housing in urban and inner-ring suburban areas. This book explains how to find and take advantage of opportunities and overcome obstacles.

Download or read book Manual written by Stephen Kieren and published by Princeton Architectural Press. This book was released on 2002-04 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manual is no typical architectural monograph. It is a guidebook to how the successful Philadelphia firm KieranTimberlake builds their buildings. Manual reveals the architect's "trade secrets," opening the firm's files of details to show us how things are made. Anyone who has every looked at a building or a staircase or a shelf and wondered "how did they do that?" will find the answer in Manual. By disclosing their design strategies-illustrating them with photographs and detailed working drawings from twenty-nine built projects ranging from houses to schools, KieranTimberlake provides in this unique book a level of understanding not otherwise possible.

Download or read book Simplifying 3D Printing with OpenSCAD written by Colin Dow and published by Packt Publishing Ltd. This book was released on 2022-03-30 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: A step-by-step full-color guide to OpenSCAD that makes 3D printing easier than ever Key Features Learn more about 3D printing technology and the software used to design your objects Discover the various FDM slicer programs used to create G-code for 3D printer jobs Use a slicer program to create G-code to run your 3D printer job Book DescriptionWant to bring your 3D designs to life with OpenSCAD, but don’t know where to start? Simplifying 3D Printing with OpenSCAD will teach you the key skills so that you can focus on your ideas, not troubleshooting your 3D printer. With the help of this book, you’ll build a solid foundation in 3D printing technology, the software used for designing your objects, and an analysis of the G-code produced by the 3D printer slicer software. You’ll also get to know your 3D printer and find out how to set up a printing job effortlessly — from configuring the parameters to build well-defined designs. Consider yourself a practical learner? Use real-world examples such as designing and printing a 3D name badge, model rocket, and laptop stand, to dive into the world of 3D printers build your skillset. By the end of this 3D printing book, you'll be ready to start designing and printing your own 3D printed products using OpenSCAD and being your ideas into reality.What you will learn Gain a solid understanding of 3D printers and 3D design requirements to start creating your own objects Prepare a 3D printer for a job starting from leveling the print bed and loading the filament Discover various OpenSCAD commands and use them to create shapes Understand how OpenSCAD compares to other CAD programs Get to grips with combining text and a cube to create an object Explore the common libraries in OpenSCAD Who this book is forThis book is for engineers, hobbyists, teachers, 3D printing enthusiasts, and individuals working in the field of 3D printing. Basic knowledge of setting up and running 3D printers will help you get the most of this book.

Download or read book Advances in Structural Mechanics and Applications written by José António Fonseca de Oliveira Correia and published by Springer Nature. This book was released on 2022-06-02 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of the conference is going to benefit the researchers, academicians, students and professionals in getting enlightened on latest technologies on structural mechanics, structure and infrastructure engineering. Further, work on practical applications of developed scientific methodologies to civil structural engineering will make the proceedings more interesting and useful to practicing engineers and structural designers.

Download or read book New Technologies Development and Application VII written by Isak Karabegovic and published by Springer Nature. This book was released on with total page 781 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Seismic Design Methodologies for the Next Generation of Codes written by P. Fajfar and published by Routledge. This book was released on 2019-09-10 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings, arising from an international workshop, present research results and ideas on issues of importance to seismic risk reduction and the development of future seismic codes.

Download or read book Streamlining Local Regulations written by Stuart S. Hershey and published by . This book was released on 1983 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Green Guide to Specification written by Jane Anderson and published by John Wiley & Sons. This book was released on 2009-03-09 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: Like its predecessors, this fourth edition of The Green Guide to Specification provides designers and specifiers with easy-to-use guidance on how to make the best environmental choices when selecting construction materials and components. It is more comprehensive than its predecessors; it contains more than 1200 specifications used in six types of building: • Commercial buildings, such as offices • Educational buildings, such as schools and universities • Healthcare buildings, such as hospitals • Retail • Residential • Industrial. The principal building elements covered in this edition of The Green Guide to Specification include: • Floors • Roofs • Walls • Windows • Insulation • Landscaping. The performance of each specification is measured against a range of environmental impacts, including: • climate change • toxicity • fossil fuel and ozone depletion • levels of emissions and pollutants • mineral and water extraction. The Green Guide to Specification provides robust information to assist decision-making by translating numerical life-cycle assessment data into a simple A+ to E scale of environmental ratings, enabling specifiers to make meaningful comparisons between materials and components. The Green Guide to Specification is an essential tool for architects, surveyors, building managers and property owners seeking to reduce the environmental impact of their buildings by informed and responsible selection of construction materials and components.

Download or read book Brick and Block Masonry From Historical to Sustainable Masonry written by Jan Kubica and published by CRC Press. This book was released on 2020-07-06 with total page 1097 pages. Available in PDF, EPUB and Kindle. Book excerpt: Brick and Block Masonry - From Historical to Sustainable Masonry contains the keynote and semi-keynote lectures and all accepted regular papers presented online during the 17th International Brick and Block Masonry Conference IB2MaC (Kraków, Poland, July 5-8, 2020). Masonry is one of the oldest structures, with more than 6,000 years of history. However, it is still one of the most popular and traditional building materials, showing new and more attractive features and uses. Modern masonry, based on new and modified traditional materials and solutions, offers a higher quality of life, energy savings and more sustainable development. Hence, masonry became a more environmentally friendly building structure. Brick and Block Masonry - From Historical to Sustainable Masonry focuses on historical, current and new ideas related to masonry development, and will provide a very good platform for sharing knowledge and experiences, and for learning about new materials and technologies related to masonry structures. The book will be a valuable compendium of knowledge for researchers, representatives of industry and building management, for curators and conservators of monuments, and for students.

Download or read book Peopling the Landscape of atalh y k written by Ian Hodder and published by British Institute of Archaeology at Ankara. This book was released on 2020-11-01 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume reports on the ways in which humans engaged in their material and biotic environments at Çatalhöyük, using a wide range of archaeological evidence. This volume also summarizes work on the skeletal remains recovered from the site, as well as analytical research on isotopes and aDNA.

Download or read book Art of the Ancestors Spatial and temporal patterning in the ceiling rock art of Nawarla Gabarnmang Arnhem Land Australia written by Robert G. Gunn and published by Archaeopress Publishing Ltd. This book was released on 2018-12-31 with total page 918 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume, focusing on the ceiling art at Nawarla Gabarnmang, one of the richest rock art sites in Arnhem Land (in Australia’s Northern Territory), presents a new systematic approach to the archaeological recording and documentation of rock art developed to analyse the spatial and temporal structure of complex rock art panels.

Download or read book Antique Trader Tools Price Guide written by Clarence Blanchard and published by Penguin. This book was released on 2010-02-08 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Most Valuable Tool in Your Toolbox Lacking the edge on tool information? Cut through the competition and hammer home deals like a pro with Antique Trader Tools Price Guide. Featuring 700 color photos, thousands of listings with current values, market trends, and collecting advice, it's the definitive reference on antique tools. This book features: • 700 color photos, with actual prices received at auctions • 2,000 listings covering planes, braces, drills, saws, hammers, levels, rules, squares, gauges, scientific instruments, patented tools, advertising, and much more • Information on building a collection, condition grading, market trends, and investing New! • Chapter on collecting Stanley tools • Condition grading photos

Download or read book The Matter of atalh y k written by Ian Hodder and published by British Institute of Archaeology at Ankara. This book was released on 2021-04-01 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents material artifacts recovered from the site in these seasons, including a range of clay-based objects (ceramics, clay balls, tokens, figurines) as well as those made of stone, shell and textile.

Download or read book Motion and Path Planning for Additive Manufacturing written by Alex C. Roschli and published by Elsevier. This book was released on 2023-11-21 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Motion and Path Planning for Additive Manufacturing takes a deep dive into the concepts and computations behind slicing software – the software that uses 3D models to generate the commands required to control the motion of a 3D printer and ultimately construct objects. Starting with a brief review of the different types of motion in additive systems, this book walks through the steps of the path planning process and discusses the different types of toolpaths and their corresponding function in additive manufacturing. Planar, non-planar, and off-axis path planning are examined and explained. This book also presents pathing considerations for different types of 3D-printers, including extrusion, non-extrusion, and hybrid systems as well as 3- and 5-axis systems. Engineers, researchers, and designers in the additive manufacturing field can use this book as a reference for every step of the path planning process, as well as a guide that explains the computations underlying the creation and use of toolpaths. - Outlines the entire toolpath planning process required to go from a computer-aided design (CAD) model to G-code that a 3D printer can then use to construct a part - Defines the terms and variables used in slicing and other path-planning software - Highlights all the available kinematic arrangements for motion systems in additive manufacturing as well as the advantages and risks of each method - Discusses the nuances of path planning for extrusion, non-extrusion, and hybrid process as well as 3- and 5-axis additive systems - Provides an up-to-date explanation of advancements in toolpath planning and state-of-the-art slicing processes that use real-time data collection

Download or read book Current Perspectives and New Directions in Mechanics Modelling and Design of Structural Systems written by Alphose Zingoni and published by CRC Press. This book was released on 2022-09-02 with total page 4438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems comprises 330 papers that were presented at the Eighth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2022, Cape Town, South Africa, 5-7 September 2022). The topics featured may be clustered into six broad categories that span the themes of mechanics, modelling and engineering design: (i) mechanics of materials (elasticity, plasticity, porous media, fracture, fatigue, damage, delamination, viscosity, creep, shrinkage, etc); (ii) mechanics of structures (dynamics, vibration, seismic response, soil-structure interaction, fluid-structure interaction, response to blast and impact, response to fire, structural stability, buckling, collapse behaviour); (iii) numerical modelling and experimental testing (numerical methods, simulation techniques, multi-scale modelling, computational modelling, laboratory testing, field testing, experimental measurements); (iv) design in traditional engineering materials (steel, concrete, steel-concrete composite, aluminium, masonry, timber); (v) innovative concepts, sustainable engineering and special structures (nanostructures, adaptive structures, smart structures, composite structures, glass structures, bio-inspired structures, shells, membranes, space structures, lightweight structures, etc); (vi) the engineering process and life-cycle considerations (conceptualisation, planning, analysis, design, optimization, construction, assembly, manufacture, maintenance, monitoring, assessment, repair, strengthening, retrofitting, decommissioning). Two versions of the papers are available: full papers of length 6 pages are included in the e-book, while short papers of length 2 pages, intended to be concise but self-contained summaries of the full papers, are in the printed book. This work will be of interest to civil, structural, mechanical, marine and aerospace engineers, as well as planners and architects.