Download or read book An Assessment of the Prospects for Inertial Fusion Energy written by National Research Council and published by National Academies Press. This book was released on 2013-07-05 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: The potential for using fusion energy to produce commercial electric power was first explored in the 1950s. Harnessing fusion energy offers the prospect of a nearly carbon-free energy source with a virtually unlimited supply of fuel. Unlike nuclear fission plants, appropriately designed fusion power plants would not produce the large amounts of high-level nuclear waste that requires long-term disposal. Due to these prospects, many nations have initiated research and development (R&D) programs aimed at developing fusion as an energy source. Two R&D approaches are being explored: magnetic fusion energy (MFE) and inertial fusion energy (IFE). An Assessment of the Prospects for Inertial Fusion Energy describes and assesses the current status of IFE research in the United States; compares the various technical approaches to IFE; and identifies the scientific and engineering challenges associated with developing inertial confinement fusion (ICF) in particular as an energy source. It also provides guidance on an R&D roadmap at the conceptual level for a national program focusing on the design and construction of an inertial fusion energy demonstration plant.
Download or read book Assessment of Inertial Confinement Fusion Targets written by National Research Council and published by National Academies Press. This book was released on 2013-07-17 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the fall of 2010, the Office of the U.S. Department of Energy's (DOE's) Secretary for Science asked for a National Research Council (NRC) committee to investigate the prospects for generating power using inertial confinement fusion (ICF) concepts, acknowledging that a key test of viability for this concept-ignition -could be demonstrated at the National Ignition Facility (NIF) at Lawrence Livermore National Laboratory (LLNL) in the relatively near term. The committee was asked to provide an unclassified report. However, DOE indicated that to fully assess this topic, the committee's deliberations would have to be informed by the results of some classified experiments and information, particularly in the area of ICF targets and nonproliferation. Thus, the Panel on the Assessment of Inertial Confinement Fusion Targets ("the panel") was assembled, composed of experts able to access the needed information. The panel was charged with advising the Committee on the Prospects for Inertial Confinement Fusion Energy Systems on these issues, both by internal discussion and by this unclassified report. A Panel on Fusion Target Physics ("the panel") will serve as a technical resource to the Committee on Inertial Confinement Energy Systems ("the Committee") and will prepare a report that describes the R&D challenges to providing suitable targets, on the basis of parameters established and provided to the Panel by the Committee. The Panel on Fusion Target Physics will prepare a report that will assess the current performance of fusion targets associated with various ICF concepts in order to understand: 1. The spectrum output; 2. The illumination geometry; 3. The high-gain geometry; and 4. The robustness of the target design. The panel addressed the potential impacts of the use and development of current concepts for Inertial Fusion Energy on the proliferation of nuclear weapons information and technology, as appropriate. The Panel examined technology options, but does not provide recommendations specific to any currently operating or proposed ICF facility.
Download or read book Nuclear Fusion by Inertial Confinement written by Guillermo Velarde and published by CRC Press. This book was released on 1992-12-15 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear Fusion by Inertial Confinement provides a comprehensive analysis of directly driven inertial confinement fusion. All important aspects of the process are covered, including scientific considerations that support the concept, lasers and particle beams as drivers, target fabrication, analytical and numerical calculations, and materials and engineering considerations. Authors from Australia, Germany, Italy, Japan, Russia, Spain, and the U.S. have contributed to the volume, making it an internationally significant work for all scientists working in the Inertial Confinement Fusion (ICF) field, as well as for graduate students in engineering and physics with interest in ICF.
Download or read book Induction Accelerators written by Ken Takayama and published by Springer Science & Business Media. This book was released on 2010-10-05 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: A broad class of accelerators rests on the induction principle whereby the accelerating electrical fields are generated by time-varying magnetic fluxes. Particularly suitable for the transport of bright and high-intensity beams of electrons, protons or heavy ions in any geometry (linear or circular) the research and development of induction accelerators is a thriving subfield of accelerator physics. This text is the first comprehensive account of both the fundamentals and the state of the art about the modern conceptual design and implementation of such devices. Accordingly, the first part of the book is devoted to the essential features of and key technologies used for induction accelerators at a level suitable for postgraduate students and newcomers to the field. Subsequent chapters deal with more specialized and advanced topics.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1989 with total page 988 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fusion Energy Update written by and published by . This book was released on 1986 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1994-12 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Frontiers in High Energy Density Physics written by National Research Council and published by National Academies Press. This book was released on 2003-05-11 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent scientific and technical advances have made it possible to create matter in the laboratory under conditions relevant to astrophysical systems such as supernovae and black holes. These advances will also benefit inertial confinement fusion research and the nation's nuclear weapon's program. The report describes the major research facilities on which such high energy density conditions can be achieved and lists a number of key scientific questions about high energy density physics that can be addressed by this research. Several recommendations are presented that would facilitate the development of a comprehensive strategy for realizing these research opportunities.
Download or read book 11th International Conference on High Energy Accelerators written by Newman and published by Birkhäuser. This book was released on 2013-11-21 with total page 969 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Conference timetable had to be so arranged as to spread the main topics over several separate sessions. It was therefore decided to publish the material in these Proceedings under nine subject headings, irrespective of session. Within each chapter, which is preceded by a list of the sessions featuring the subject, all papers, invited and contributed, whether presented at the Conference or accepted for publication only, have been arranged in some lo gical order. The reports of the four Panel Discussions were edited or summarized by the respective Moderator in consultation with Panel Members. In one instance, shortened versions of the Introductory Papers precede the discussion. Where possible, verbatim accounts of the often lively exchanges have been retained. The customary catalogue of high-energy acceler ators has been published separately. The continuing world-wide activities in accelerator research, witl1 its ever larger pro jects, are reflected by the numerous contributions accepted for inclusion in these Proceedings, which have reached the limit of what a single volume can manageably contain, while making rapid publication even harder to achieve. All the more reason to extend the gratitude of all con cerned to those involved in the chain of production: - To the authors, for their prompt handing-in or timely posting of their papers. Thanks also to their secretaries who followed the guidelines for the presentation of camera-ready copy.
Download or read book ERDA Energy Research Abstracts written by and published by . This book was released on 1983 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Superconductivity written by Peter J. Lee and published by John Wiley & Sons. This book was released on 2001-05-02 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive coverage of superconductivity from the Wiley Encyclopedia of Electrical and Electronics Engineering Engineering Superconductivity features fifty articles selected from the Wiley Encyclopedia of Electrical and Electronics Engineering, the one truly indispensable reference for electrical engineers. Superconductor technology has made highly advanced experiments possible in chemistry, biochemistry, particle physics, and health sciences, and introduced new applications currently in use in fields from medicine to cellular communications. Taken together, these articles-written by acknowledged experts in the field-provide the most complete and in-depth accounting of superconductivity in existence. The book brings together a wealth of information that would not be available to those who do not have access to the full 24-volume encyclopedia. This thorough survey looks at the application of superconductors from an engineer's practical perspective rather than a theoretical approach. Engineering Superconductivity provides full coverage of the fundamentals of superconducting behavior and explains the properties and fabrication methods of commercially produced superconductors. Up-to-date material on superconductor applications as well as competing technologies is included. The fifty articles presented here are divided into three sections: Superconductivity and magnetism Superconductors Applications and related technology Engineering Superconductivity is a complete and up-to-date reference for engineers, physicists, chemists, materials scientists, and anyone working with superconductors.
Download or read book The Physics of Inertial Fusion written by Stefano Atzeni and published by OUP Oxford. This book was released on 2004-06-03 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is on inertial confinement fusion, an alternative way to produce electrical power from hydrogen fuel by using powerful lasers or particle beams. It involves the compression of tiny amounts (micrograms) of fuel to thousand times solid density and pressures otherwise existing only in the centre of stars. Thanks to advances in laser technology, it is now possible to produce such extreme states of matter in the laboratory. Recent developments have boosted laser intensities again with new possibilities for laser particle accelerators, laser nuclear physics, and fast ignition of fusion targets. This is a reference book for those working on beam plasma physics, be it in the context of fundamental research or applications to fusion energy or novel ultra-bright laser sources. The book combines quite different areas of physics: beam target interaction, dense plasmas, hydrodynamic implosion and instabilities, radiative energy transfer as well as fusion reactions. Particular attention is given to simple and useful modelling, including dimensional analysis and similarity solutions. Both authors have worked in this field for more than 20 years. They want to address in particular those teaching this topic to students and all those interested in understanding the technical basis.
Download or read book Energy and Water Development Appropriations for 1996 written by United States. Congress. House. Committee on Appropriations. Subcommittee on Energy and Water Development and published by . This book was released on 1995 with total page 1248 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Atomkernenergie Kerntechnik written by and published by . This book was released on 1984 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fusion Technology written by and published by . This book was released on 1994 with total page 662 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1983 with total page 806 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiannual, with semiannual and annual indexes. References to all scientific and technical literature coming from DOE, its laboratories, energy centers, and contractors. Includes all works deriving from DOE, other related government-sponsored information, and foreign nonnuclear information. Arranged under 39 categories, e.g., Biomedical sciences, basic studies; Biomedical sciences, applied studies; Health and safety; and Fusion energy. Entry gives bibliographical information and abstract. Corporate, author, subject, report number indexes.
Download or read book Documentation of Plasma Physics Pt 1 Experimental Plasma Physics and Theoretical Plasma Physics written by and published by . This book was released on 1981 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt:
