Download or read book Inelastic Deformation of Metals and Structures Under Dynamic and Quasi Static Cyclic Loading written by A. M. Eleiche and published by . This book was released on 1983 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: The investigations of the modes of cyclic plastic behaviour in tubes under internal pressure and cyclic thermal gradient have been continued. An approximate uniaxial model of the biaxial tube problem is used for studying the influence of the hardening rule on the cyclic plastic behaviour. Comparisons are made between kinematic and isotropic hardening rules. These two theories represent the extremes of cyclic plastic behaviour. The cyclic plastic behaviour of specimens used in the so-called pulley test are studied using linear kinematic hardening theory. The pulley test simulates the cyclic thermal stresses by means of cyclic bending of a thin specimen around the circumference of a freely rotating pulley. Theoretical results for stress and strain behaviour are obtained for both wire and strip specimens. In Part 3, the reference stress method - which has been used with great success in the analysis of creeping structures - is applied to the analysis of components operating under conditions where cyclic hardening and cyclic creep are dominant.
Download or read book Inelastic Deformation of Metals written by Donald C. Stouffer and published by John Wiley & Sons. This book was released on 1996-01-05 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using a totally new approach, this groundbreaking book establishesthe logical connections between metallurgy, materials modeling, andnumerical applications. In recognition of the fact that classicalmethods are inadequate when time effects are present, or whencertain types of multiaxial loads are applied, the new, physicallybased state variable method has evolved to meet these needs.Inelastic Deformation of Metals is the first comprehensivepresentation of this new technology in book form. It developsphysically based, numerically efficient, and accurate methods forpredicting the inelastic response of metals under a variety ofloading and environmental conditions. More specifically, Inelastic Deformation of Metals: * Demonstrates how to use the metallurgical information to developmaterial models for structural simulations and low cyclic fatiguepredictions. It presents the key features of classical and statevariable modeling, describes the different types of models andtheir attributes, and provides methods for developing models forspecial situations. This book's innovative approach covers such newtopics as multiaxial loading, thermomechanical loading, and singlecrystal superalloys. * Provides comparisons between data and theory to help the readermake meaningful judgments about the value and accuracy of aparticular model and to instill an understanding of how metalsrespond in real service environments. * Analyzes the numerical methods associated with nonlinearconstitutive modeling, including time independent, time dependentnumerical procedures, time integration schemes, inversiontechniques, and sub-incrementing. Inelastic Deformation of Metals is designed to give theprofessional engineer and advanced student new and expandedknowledge of metals and modeling that will lead to more accuratejudgments and more efficient designs. In contrast to existing plasticity books, which discuss few if anycorrelations between data and models, this breakthrough volumeshows engineers and advanced students how materials and modelsactually do behave in real service environments. As greater demandsare placed on technology, the need for more meaningful judgmentsand more efficient designs increases dramatically. Incorporatingthe state variable approach, Inelastic Deformation of Metals: * Provides an overview of a wide variety of metal responsecharacteristics for rate dependent and rate independent loadingconditions * Shows the correlations between the mechanical response propertiesand the deformation mechanisms, and describes how to use thisinformation in constitutive modeling * Presents different modeling options and discusses the usefulnessand limitations of each modeling approach, with material parametersfor each model * Offers numerous examples of material response and correlationwith model predictions for many alloys * Shows how to implement nonlinear material models in stand-aloneconstitutive model codes and finite element codes An innovative, comprehensive, and essential book, InelasticDeformation of Metals will help practicing engineers and advancedstudents in mechanical, aerospace, civil, and metallurgicalengineering increase their professional skills in the moderntechnological environment.
Download or read book Deformation and Destruction of Materials and Structures Under Quasi static and Impulse Loading written by Holm Altenbach and published by Springer Nature. This book was released on 2023-02-03 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the theoretical and experimental foundations of quasi-static deformation of elastoplastic and viscoplastic materials and structural elements made of them. Experimental studies of deformation and fracture of materials under complex loading under impulse influences are described and discussed. A short introduction of theoretical and numerical methods for studying the stress–strain state of elastoplastic structural elements under dynamic, impulse loading and their interaction with other media is given.
Download or read book Research in Progress written by and published by . This book was released on 1983 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Research in Progress written by United States. Army Research Office and published by . This book was released on 1984 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vols. for 1977- consist of two parts: Chemistry, biological sciences, engineering sciences, metallurgy and materials science (issued in the spring); and Physics, electronics, mathematics, geosciences (issued in the fall).
Download or read book Inelastic Deformation of Metals Under Dynamic Loading written by Jacques W. Duffy and published by . This book was released on 1973 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt: The research is a study of the plastic response of metals to the application of dynamic loads. The study can be divided conveniently into two parts: (a) experiments on short specimens in which the state of stress is essentially homogeneous and (b) wave propagation investigations. A split-Hopkinson bar for bi-axial loading of short specimens (torsion and compression) at equivalent strain rates of about 400 or 500/sec was developed. The influence of annealing temperature on strain rate effects in copper was studied. Experiments were performed on thin-walled tubes of alpha-titanium in which pre-torqued tubes are subjected to an axial imapct. The results of these experiments cannot be explained satisfactorily using a strain rate independent theory. It was found necessary to develop a strain rate dependent theory which then predicted the actual material behavior with good accuracy. (Modified author abstract).
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Vibration Analysis and Control written by Francisco Beltran-Carbajal and published by BoD – Books on Demand. This book was released on 2011-09-06 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the important and diverse field of vibration analysis and control. It is written by experts from the international scientific community and covers a wide range of research topics related to design methodologies of passive, semi-active and active vibration control schemes, vehicle suspension systems, vibration control devices, fault detection, finite element analysis and other recent applications and studies of this fascinating field of vibration analysis and control. The book is addressed to researchers and practitioners of this field, as well as undergraduate and postgraduate students and other experts and newcomers seeking more information about the state of the art, challenging open problems, innovative solution proposals and new trends and developments in this area.
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1975 with total page 1166 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book STESSA 2003 Behaviour of Steel Structures in Seismic Areas written by Federico Mazzolani and published by Routledge. This book was released on 2018-03-29 with total page 869 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting a comprehensive overview of recent developments in the field of seismic resistant steel structures, this volume reports upon the latest progress in theoretical and experimental research into the area, and groups findings in the following key sections: · performance-based design of structures · structural integrity under exceptional loading · material and member behaviour · connections · global behaviour · moment resisting frames · passive and active control · strengthening and repairing · codification · design and application
Download or read book Issues in Materials and Manufacturing Research 2011 Edition written by and published by ScholarlyEditions. This book was released on 2012-01-09 with total page 7150 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Materials and Manufacturing Research: 2011 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Materials and Manufacturing Research. The editors have built Issues in Materials and Manufacturing Research: 2011 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Materials and Manufacturing Research in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Materials and Manufacturing Research: 2011 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1971 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Transactions of the International Conference on Structural Mechanics in Reactor Technology written by and published by . This book was released on 1987 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Foundations of Elastoplasticity Subloading Surface Model written by Koichi Hashiguchi and published by Springer Nature. This book was released on 2023-06-12 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the standard text book for elastoplasticity/viscoplasticity which is explained comprehensively covering the rate-independent to -dependent finite deformations of metals, soils, polymers, crystal plasticity, etc. and the friction phenomenon. Concise explanations on vector-tensor analysis and continuum mechanics are provided first, covering the underlying physical concepts, e.g. various time-derivatives, pull-back and push-forward operations, work-conjugacy and multiplicative decomposition of deformation gradient tensor. Then, the rigorous elastoplastic/viscoplastic model, called the subloading surface model, is explained comprehensively, which is based on the subloading surface concept to describe the continuous development of the plastic/viscoplastic strain rate as the stress approaches to the yield surface, while it can never be described by the other plasticity models, e.g. the Chaboche-Ohno and the Dafalias-Yoshida models assuming the purely-elastic domain. The main features of the subloading surface model are as follows: 1) The subloading surface concept underling the cyclic plasticity is introduced, which insists that the plastic deformation develops as the stress approaches the yield surface. Thus, the smooth elastic-plastic transition leading to the continuous variation of the tangent stiffness modulus is described always. 2) The subloading-overstress model is formulated by which the elastoplastic deformation during the quasi-static loading and the viscoplastic deformation during the dynamic and impact loading can be described by the unified equation. Then, only this model can be used to describe the deformation in the general rate of deformation, disusing the elastoplastic constitutive equation. 3) The hyperelastic-based (visco)plasticity based on the multiplicative decomposition of deformation gradient tensor and the subloading surface model is formulated for the exact descriptions of the finite elastic and (visco)plastic deformations. 4) The subloading-friction model is formulated for the exact description of the dry and the fluid (lubricated) frictions at the general rate of sliding from the static to the impact sliding. Thus, all the elastic and inelastic deformation/sliding phenomena of solids can be described accurately in the unified equation by the subloading-overstress model. The subloading surface model will be engraved as the governing law of irreversible deformation of solids in the history of solid mechanics.
Download or read book Dynamic Failure of Materials and Structures written by Arun Shukla and published by Springer Science & Business Media. This book was released on 2009-10-20 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Failure of Materials and Structures discusses the topic of dynamic loadings and their effect on material and structural failure. Since dynamic loading problems are very difficult as compared to their static counterpart, very little information is currently available about dynamic behavior of materials and structures. Topics covered include the response of both metallic as well as polymeric composite materials to blast loading and shock loadings, impact loadings and failure of novel materials under more controlled dynamic loads. These include response of soft materials that are important in practical use but have very limited information available on their dynamic response. Dynamic fragmentation, which has re-emerged in recent years has also been included. Both experimental as well as numerical aspects of material and structural response to dynamic loads are discussed. Written by several key experts in the field, Dynamic Failure of Materials and Structures will appeal to graduate students and researchers studying dynamic loadings within mechanical and civil engineering, as well as in physics and materials science.
Download or read book Response of Metals and Metallic Structures to Dynamic Loading written by and published by . This book was released on 1978 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic response of metals and metallic structures is reviewed with respect to current procedures and understanding in order to identify research needs. Emphasis is placed on response in military environments which involve very high loading rates, such as those due to air blasts and underwater explosions. Included in this review is discussion of basic inelastic deformation mechanisms, mechanical properties, fracture analysis and testing, structural analysis (including consideration of buckling response) and scale modeling.
Download or read book Engine Structures written by and published by . This book was released on 1988 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
