Download or read book The Deep Mixing Method written by Masaki Kitazume and published by CRC Press. This book was released on 2013-02-21 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Deep Mixing Method (DMM), a deep in-situ soil stabilization technique using cement and/or lime as a stabilizing agent, was developed in Japan and in the Nordic countries independently in the 1970s. Numerous research efforts have been made in these areas investigating properties of treated soil, behavior of DMM improved ground under static and d

Download or read book Slurry Walls written by David B. Paul and published by ASTM International. This book was released on 1992 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Principles and Practice of Ground Improvement written by Jie Han and published by John Wiley & Sons. This book was released on 2015-06-22 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gain a stronger foundation with optimal ground improvement Before you break ground on a new structure, you need to analyze the structure of the ground. Expert analysis and optimization of the geo-materials on your site can mean the difference between a lasting structure and a school in a sinkhole. Sometimes problematic geology is expected because of the location, but other times it's only unearthed once construction has begun. You need to be able to quickly adapt your project plan to include an improvement to unfavorable ground before the project can safely continue. Principles and Practice of Ground Improvement is the only comprehensive, up-to-date compendium of solutions to this critical aspect of civil engineering. Dr. Jie Han, registered Professional Engineer and preeminent voice in geotechnical engineering, is the ultimate guide to the methods and best practices of ground improvement. Han walks you through various ground improvement solutions and provides theoretical and practical advice for determining which technique fits each situation. Follow examples to find solutions to complex problems Complete homework problems to tackle issues that present themselves in the field Study design procedures for each technique to simplify field implementation Brush up on modern ground improvement technologies to keep abreast of all available options Principles and Practice of Ground Improvement can be used as a textbook, and includes Powerpoint slides for instructors. It's also a handy field reference for contractors and installers who actually implement plans. There are many ground improvement solutions out there, but there is no single right answer to every situation. Principles and Practice of Ground Improvement will give you the information you need to analyze the problem, then design and implement the best possible solution.

Download or read book Pile Design and Construction Practice Fifth Edition written by Michael Tomlinson and published by CRC Press. This book was released on 2007-12-06 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: This international handbook is essential for geotechnical engineers and engineering geologists responsible for designing and constructing piled foundations. It explains general principles and practice and details current types of pile, piling equipment and methods. It includes calculations of the resistance of piles to compressive loads, pile groups under compressive loading, piled foundations for resisting uplift and lateral loading and the structural design of piles and pile groups. Marine structures, miscellaneous problems (including machinery foundations, underpinning, mining subsidence areas, contracts and frozen ground), durability of piled foundations, ground investigations, and pile testing are also covered. It introduces the 2005 version of Eurocode7, BS 8004 and other codes, and refers to BS 6349 on maritime structures, and new forms of civil engineering contracts suitable for piling projects. It includes numerous worked examples to the codes, many based on actual problems. It also gives very comprehensive information for students.

Download or read book Drilled Shafts written by Michael W. O'Neill and published by . This book was released on 1999 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Basics of Foundation Design written by Bengt Fellenius and published by Lulu.com. This book was released on 2017-03-17 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: The "Red Book" presents a background to conventional foundation analysis and design. The text is not intended to replace the much more comprehensive 'standard' textbooks, but rather to support and augment these in a few important areas, supplying methods applicable to practical cases handled daily by practising engineers and providing the basic soil mechanics background to those methods. It concentrates on the static design for stationary foundation conditions. Although the topic is far from exhaustively treated, it does intend to present most of the basic material needed for a practising engineer involved in routine geotechnical design, as well as provide the tools for an engineering student to approach and solve common geotechnical design problems.

Download or read book Ground Improvement Third Edition written by Klaus Kirsch and published by CRC Press. This book was released on 2012-11-26 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: When finding another location, redesigning a structure, or removing troublesome ground at a project site are not practical options, prevailing ground conditions must be addressed. Improving the ground—modifying its existing physical properties to enable effective, economic, and safe construction—to achieve appropriate engineering performance is an increasingly successful approach. This third edition of Ground Improvement provides a comprehensive overview of the major ground improvement techniques in use worldwide today. Written by recognized experts who bring a wealth of knowledge and experience to bear on their contributions, the chapters are fully updated with recent developments including advancements in equipment and methods since the last edition. The text provides an overview of the processes and the key geotechnical and design considerations as well as equipment needed for successful execution. The methods described are well illustrated with relevant case histories and include the following approaches: Densification using deep vibro techniques or dynamic compaction Consolidation employing deep fabricated drains and associated methods Injection techniques, such as permeation and jet grouting, soil fracture grouting, and compaction grouting New in-situ soil mixing processes, including trench-mixing TRD and panel-mixing CSM approaches The introductory chapter touches on the historical development, health and safety, greenhouse gas emissions, and two less common techniques: blasting and the only reversible process, ground freezing. This practical and established guide provides readers with a solid basis for understanding and further study of the most widely used processes for ground improvement. It is particularly relevant for civil and geotechnical engineers as well as contractors involved in piling and ground engineering of any kind. It would also be useful for advanced graduate and postgraduate civil engineering and geotechnical students.

Download or read book Quay Walls Second Edition written by J.G. de Gijt and published by CRC Press. This book was released on 2013-12-02 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of the handbook of Quay Walls provides the reader with essential knowledge for the planning, design, execution and maintenance of quay walls, as well as general information about historical developments and lessons learned from the observation of ports in various countries. Technical chapters are followed by a detailed calculation of a quay wall based on a semi-probabilistic design procedure, which applies the theory presented earlier. Since the publication of the Dutch edition in 2003 and the English version in 2005, considerable new experience has been obtained by the many practitioners using the book, prompting the update of this handbook. Moreover, the introduction of the Eurocodes in 2012 has prompted a complete revision of the Design chapter, which is now compliant with the Eurocodes. Furthermore, additional recommendations for using FEM-analysis in quay wall design have been included. In response to ongoing discussions within the industry about buckling criteria for steel pipe piles, a thorough research project was carried out on steel pipe piles fi lled with sand and on piles without sand. The results of this research programme have also been incorporated in this new version. Finally, the section on corrosion has been updated to refl ect the latest knowledge and attention has been given to the latest global developments in quay wall engineering. The new edition was made possible thanks to the contributions of numerous experts from the Netherlands and Belgium.

Download or read book Deep Foundations on Bored and Auger Piles BAP III written by W. Haegeman and published by CRC Press. This book was released on 2020-09-29 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text presents findings from the 3rd International Geotechnical Seminar, held in Ghent, Belgium. Topics include: American experiences with large diameter bored piles; case histories; static, dynamic and pile integrity testing; and installation parameters and capacity of screwed piles.

Download or read book Design and Installation of Marine Pipelines written by Mikael Braestrup and published by John Wiley & Sons. This book was released on 2009-02-12 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook on submarine pipeline systems covers a broad spectrum of topics from planning and site investigations, procurement and design, to installation and commissioning. It considers guidelines for the choice of design parameters, calculation methods and construction procedures. It is based on limit state design with partial safety coefficients.

Download or read book Fundamentals of Ground Improvement Engineering written by Jeffrey Evans and published by CRC Press. This book was released on 2021-09-17 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ground improvement has been one of the most dynamic and rapidly evolving areas of geotechnical engineering and construction over the past 40 years. The need to develop sites with marginal soils has made ground improvement an increasingly important core component of geotechnical engineering curricula. Fundamentals of Ground Improvement Engineering addresses the most effective and latest cutting-edge techniques for ground improvement. Key ground improvement methods are introduced that provide readers with a thorough understanding of the theory, design principles, and construction approaches that underpin each method. Major topics are compaction, permeation grouting, vibratory methods, soil mixing, stabilization and solidification, cutoff walls, dewatering, consolidation, geosynthetics, jet grouting, ground freezing, compaction grouting, and earth retention. The book is ideal for undergraduate and graduate-level university students, as well as practitioners seeking fundamental background in these techniques. The numerous problems, with worked examples, photographs, schematics, charts and graphs make it an excellent reference and teaching tool.

Download or read book Recent Developments of Soil Mechanics and Geotechnics in Theory and Practice written by Theodoros Triantafyllidis and published by Springer Nature. This book was released on 2019-08-20 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides essential insights into recent developments in fundamental geotechnical engineering research. Special emphasis is given to a new family of constitutive soil description methods, which take into account the recent loading history and the dilatancy effects. Particular attention is also paid to the numerical implementation of multi-phase material under dynamic loads, and to geotechnical installation processes. In turn, the book addresses implementation problems concerning large deformations in soils during piling operations or densification processes, and discusses the limitations of the respective methods. Numerical simulations of dynamic consolidation processes are presented in slope stability analysis under seismic excitation. Lastly, achieving the energy transition from conventional to renewable sources will call for geotechnical expertise. Consequently, the book explores and analyzes a selection of interesting problems involving the stability and serviceability of supporting structures, and provides new solutions approaches for practitioners and scientists in geotechnical engineering. The content reflects the outcomes of the Colloquium on Geotechnical Engineering 2019 (Geotechnik Kolloquium), held in Karlsruhe, Germany in September 2019.

Download or read book Polymer Support Fluids in Civil Engineering written by Carlos Lam and published by ICE Publishing. This book was released on 2017-11-24 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first on the use of polymer support fluids in the construction industry, this book provides a detailed study of their use in civil engineering, covering all major aspects including fundamental material properties, laboratory and site testing, as well as case histories and specifications.

Download or read book Geotechnical Engineering and Sustainable Construction written by Mahdi O. Karkush and published by Springer Nature. This book was released on 2022-03-19 with total page 791 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains selected articles from the Second International Conference on Geotechnical Engineering-Iraq (ICGE-Iraq) held in Akre/Duhok/Iraq from June 22 to 23, 2021, to discuss the challenges, opportunities, and problems of geotechnical engineering in projects. Also, the conference includes modern applications in structural engineering, materials of construction, construction management, planning and design of structures, and remote sensing and surveying engineering. The ICGE-Iraq organized by the Iraqi Scientific Society of Soil Mechanics and Foundation Engineering (ISSSMFE) in cooperation with Akre Technical Institute / Duhok Polytechnic University, College of Engineering /University of Baghdad, and Civil Engineering Department/University of Technology. The book covers a wide spectrum of themes in civil engineering, including but not limited to sustainability and environmental-friendly applications. The contributing authors are academic and researchers in their respective fields from several countries. This book will provide a valuable resource for practicing engineers and researchers in the field of geotechnical engineering, structural engineering, and construction and management of projects.

Download or read book Project Management in Nuclear Power Plant Construction written by International Atomic Energy Agency and published by . This book was released on 2012 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication provides guidance on project management from the preparatory phase to plant turnover to commissioning of nuclear power plants. The guidelines and experiences described will enable project managers to obtain better performance in nuclear power plant construction.

Download or read book Enhancing Future Skills and Entrepreneurship written by Kuldip Singh Sangwan and published by Springer Nature. This book was released on 2020-07-27 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book presents the proceedings of the 3rd Indo-German Conference on Sustainability in Engineering held at Birla Institute of Technology and Science, Pilani, India, on September 16–17, 2019. Intended to foster the synergies between research and education, the conference is one of the joint activities of the BITS Pilani and TU Braunschweig conducted under the auspices of Indo-German Center for Sustainable Manufacturing, established in 2009. The book is divided into three sections: engineering, education and entrepreneurship, covering a range of topics, such as renewable energy forecasting, design & simulation, Industry 4.0, and soft & intelligent sensors for energy efficiency. It also includes case studies on lean and green manufacturing, and life cycle analysis of ceramic products, as well as papers on teaching/learning methods based on the use of learning factories to improve students’problem-solving and personal skills. Moreover, the book discusses high-tech ideas to help the large number of unemployed engineering graduates looking for jobs become tech entrepreneurs. Given its broad scope, it will appeal to academics and industry professionals alike.

Download or read book Greening the Financial Sector written by Doris Köhn and published by Springer. This book was released on 2011-12-08 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental finance, particularly energy efficiency and renewable energy (EERE) finance, can and should serve as an interface to other sub-sectors of financial sector promotion such as microfinance, housing finance or agricultural finance. For example, existing clients of financial institutions include small and medium-sized enterprises and households, and these are often suffering from high energy prices or have no access to sustainable energy supply. At the same time, these clients are vulnerable to extreme weather events, and often hit hardest by the impact of climate change. There are many other examples which show that the financial sector has an enormous potential to support “green” investments. In order to tap this potential on a sustainable basis, it is important to have a sound understanding which role financial institutions can and should play. This book provides a blend of well-founded professional and scientific perspectives on the potential of Environmental finance in developing and transition countries.