Download or read book Radiation Source Use and Replacement written by National Research Council and published by National Academies Press. This book was released on 2008-05-25 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the United States there are several thousand devices containing high-activity radiation sources licensed for use in areas ranging from medical uses such as cancer therapy to safety uses such as testing of structures and industrial equipment. Those radiation sources are licensed by the U.S. Nuclear Regulatory Commission and state agencies. Concerns have been raised about the safety and security of the radiation sources, particularly amid fears that they could be used to create dirty bombs, or radiological dispersal device (RDD). In response to a request from Congress, the U.S. Nuclear Regulatory Commission asked the National Research Council to conduct a study to review the uses of high-risk radiation sources and the feasibility of replacing them with lower risk alternatives. The study concludes that the U.S. government should consider factors such as potential economic consequences of misuse of the radiation sources into its assessments of risk. Although the committee found that replacements of most sources are possible, it is not economically feasible in some cases. The committee recommends that the U.S. government take steps to in the near term to replace radioactive cesium chloride radiation sources, a potential "dirty bomb" ingredient used in some medical and research equipment, with lower-risk alternatives. The committee further recommends that longer term efforts be undertaken to replace other sources. The book presents a number of options for making those replacements.

Download or read book Industrial Radiology written by R. Halmshaw and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial radiography is a well-established non-destructive testing (NDT) method in which the basic principles were established many years ago. However, during 1993-95 the European Standards Organisa tion (CEN) commenced drafting many new standards on NDT including radiographic methods, and when completed these will replace national standards in all the EC member countries. In some cases these standards vary significantly from those in use in the UK at present. These CEN standards are accepted by majority, not unanimous voting, so they will become mandatory even in countries which vote against them. As most are likely to be legal by the time this second edition is published, they are described in the appropriate places in the text. The most important new technical development is the greater use of computers in radiology. In the first edition, computerized tomography was only briefly mentioned at the end of Chapter 11, as it was then largely a medical method with only a few equipments having found a place in industrial use. The method depends on a complex computer program and a large data store. Industrial equipments are now being built, although their spread into industry has been slow. Computer data storage is also being used for radiographic data. Small computers can now store all the data produced by scanning a radiographic film with a small light-spot, and various programs can be applied to these data.

Download or read book X Ray Imaging written by Harry E. Martz and published by CRC Press. This book was released on 2016-10-26 with total page 905 pages. Available in PDF, EPUB and Kindle. Book excerpt: While books on the medical applications of x-ray imaging exist, there is not one currently available that focuses on industrial applications. Full of color images that show clear spectrometry and rich with applications, X-Ray Imaging fills the need for a comprehensive work on modern industrial x-ray imaging. It reviews the fundamental science of x-ray imaging and addresses equipment and system configuration. Useful to a broad range of radiation imaging practitioners, the book looks at the rapid development and deployment of digital x-ray imaging system.

Download or read book Industrial X ray Interpretation written by Justin G. Schneeman and published by . This book was released on 1968 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: TEXTBOOK. PRACTICAL ORIENTATION. CONTENTS INCLUDE INTRODUCTION - HISTORY, INTERPRETATION-SCIENCE, THE RADIOGRAPH, THE X-RAY MACHINE, RADIOISOTOPES, X-RAY TUBES, X-RAY SYSTEMS, X-RAY POSITIONING, X-RAY ABSORPTION, SECONDARY RADIATION, INTENSIFYING SCREENS, FILM PROCESSING, PERFECT RADIOGRAPHS, X-RAY ILLUMINATION, CASTING INTERPRETATION, HONEYCOMB INTERPRETATION, BRAZING AND SOLDERING, WELD INTERPRETATION, ELECTRONIC ITEMS, SPECIALTY ITEMS, FILMLESS INTERPRETATION, MOTION RADIOGRAPHY, 3-D RADIOGRAPHY, XERORADIOGRAPHY, IMAGE QUALITY INDICATORS, RADIATION AND HIGH VOLTAGE SAFETY, X-RAY FILM TYPES AND SIZES, INTERPRETATION-A PROFESSION, THE X-RAY REPORT. INDEX. NO BIBLIOGRAPHY. ONE REFERENCE.

Download or read book Radiography in Modern Industry written by Eastman Kodak Company. Radiography Markets Division and published by . This book was released on 1969 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Industrial X Ray Computed Tomography written by Simone Carmignato and published by Springer. This book was released on 2017-10-18 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: X-ray computed tomography has been used for several decades as a tool for measuring the three-dimensional geometry of the internal organs in medicine. However, in recent years, we have seen a move in manufacturing industries for the use of X-ray computed tomography; first to give qualitative information about the internal geometry and defects in a component, and more recently, as a fully-quantitative technique for dimensional and materials analysis. This trend is primarily due to the ability of X-ray computed tomography to give a high-density and multi-scale representation of both the external and internal geometry of a component, in a non-destructive, non-contact and relatively fast way. But, due to the complexity of X-ray computed tomography, there are remaining metrological issues to solve and the specification standards are still under development. This book will act as a one-stop-shop resource for students and users of X-ray computed tomography in both academia and industry. It presents the fundamental principles of the technique, detailed descriptions of the various components (hardware and software), current developments in calibration and performance verification and a wealth of example applications. The book will also highlight where there is still work to do, in the perspective that X-ray computed tomography will be an essential part of Industry 4.0.

Download or read book Medical Imaging Systems written by Andreas Maier and published by Springer. This book was released on 2018-08-02 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book gives a complete and comprehensive introduction to the fields of medical imaging systems, as designed for a broad range of applications. The authors of the book first explain the foundations of system theory and image processing, before highlighting several modalities in a dedicated chapter. The initial focus is on modalities that are closely related to traditional camera systems such as endoscopy and microscopy. This is followed by more complex image formation processes: magnetic resonance imaging, X-ray projection imaging, computed tomography, X-ray phase-contrast imaging, nuclear imaging, ultrasound, and optical coherence tomography.

Download or read book Industrial Applications of X Ray Diffraction written by Frank Smith and published by CRC Press. This book was released on 1999-09-22 with total page 1026 pages. Available in PDF, EPUB and Kindle. Book excerpt: By illustrating a wide range of specific applications in all major industries, this work broadens the coverage of X-ray diffraction beyond basic tenets, research and academic principles. The book serves as a guide to solving problems faced everyday in the laboratory, and offers a review of the current theory and practice of X-ray diffraction, major advances and potential uses.

Download or read book Practical Non destructive Testing written by Baldev Raj and published by Woodhead Publishing. This book was released on 2002 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book covers the five major NDT methods - liquid penetrants, eddy currents, magnetic particles, radiography and ultrasonics in detail and also considers newer methods such as acoustic emission and thermography and discusses their role in on-line monitoring of plant components. Analytical techniques such as reliability studies and statistical quality control are considered in terms of their ability to reduce inspection costs and limit down time. A useful chapter provides practical guidance on selecting the right method for a given situation.

Download or read book Portable X ray Fluorescence Spectrometry written by P. J. Potts and published by Royal Society of Chemistry. This book was released on 2008 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together the knowledge and expertise of internationally recognised scientists with practical experience of in situ analysis using portable X-ray fluorescence technology.

Download or read book Two dimensional X ray Diffraction written by Bob B. He and published by John Wiley & Sons. This book was released on 2018-05-18 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: An indispensable resource for researchers and students in materials science, chemistry, physics, and pharmaceuticals Written by one of the pioneers of 2D X-Ray Diffraction, this updated and expanded edition of the definitive text in the field provides comprehensive coverage of the fundamentals of that analytical method, as well as state-of-the art experimental methods and applications. Geometry convention, x-ray source and optics, two-dimensional detectors, diffraction data interpretation, and configurations for various applications, such as phase identification, texture, stress, microstructure analysis, crystallinity, thin film analysis, and combinatorial screening are all covered in detail. Numerous experimental examples in materials research, manufacture, and pharmaceuticals are provided throughout. Two-dimensional x-ray diffraction is the ideal, non-destructive analytical method for examining samples of all kinds including metals, polymers, ceramics, semiconductors, thin films, coatings, paints, biomaterials, composites, and more. Two-Dimensional X-Ray Diffraction, Second Edition is an up-to-date resource for understanding how the latest 2D detectors are integrated into diffractometers, how to get the best data using the 2D detector for diffraction, and how to interpret this data. All those desirous of setting up a 2D diffraction in their own laboratories will find the author’s coverage of the physical principles, projection geometry, and mathematical derivations extremely helpful. Features new contents in all chapters with most figures in full color to reveal more details in illustrations and diffraction patterns Covers the recent advances in detector technology and 2D data collection strategies that have led to dramatic increases in the use of two-dimensional detectors for x-ray diffraction Provides in-depth coverage of new innovations in x-ray sources, optics, system configurations, applications and data evaluation algorithms Contains new methods and experimental examples in stress, texture, crystal size, crystal orientation and thin film analysis Two-Dimensional X-Ray Diffraction, Second Edition is an important working resource for industrial and academic researchers and developers in materials science, chemistry, physics, pharmaceuticals, and all those who use x-ray diffraction as a characterization method. Users of all levels, instrument technicians and X-ray laboratory managers, as well as instrument developers, will want to have it on hand.

Download or read book Applied Welding Engineering written by Ramesh Singh and published by Elsevier. This book was released on 2011-11-01 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: While there are several books on market that are designed to serve a company's daily shop-floor needs. Their focus is mainly on the physically making specific types of welds on specific types of materials with specific welding processes. There is nearly zero focus on the design, maintenance and troubleshooting of the welding systems and equipment. Applied Welding Engineering: Processes, Codes and Standards is designed to provide a practical in-depth instruction for the selection of the materials incorporated in the joint, joint inspection, and the quality control for the final product. Welding Engineers will also find this book a valuable source for developing new welding processes or procedures for new materials as well as a guide for working closely with design engineers to develop efficient welding designs and fabrication procedures. Applied Welding Engineering: Processes, Codes and Standards is based on a practical approach. The book's four part treatment starts with a clear and rigorous exposition of the science of metallurgy including but not limited to: Alloys, Physical Metallurgy, Structure of Materials, Non-Ferrous Materials, Mechanical Properties and Testing of Metals and Heal Treatment of Steels. This is followed by self-contained sections concerning applications regarding Section 2: Welding Metallurgy & Welding Processes, Section 3: Nondestructive Testing, and Section 4: Codes and Standards. The author's objective is to keep engineers moored in the theory taught in the university and colleges while exploring the real world of practical welding engineering. Other topics include: Mechanical Properties and Testing of Metals, Heat Treatment of Steels, Effect of Heat on Material During Welding, Stresses, Shrinkage and Distortion in Welding, Welding, Corrosion Resistant Alloys-Stainless Steel, Welding Defects and Inspection, Codes, Specifications and Standards. The book is designed to support welding and joining operations where engineers pass plans and projects to mid-management personnel who must carry out the planning, organization and delivery of manufacturing projects. In this book, the author places emphasis on developing the skills needed to lead projects and interface with engineering and development teams. In writing this book, the book leaned heavily on the author's own experience as well as the American Society of Mechanical Engineers (www.asme.org), American Welding Society (www.aws.org), American Society of Metals (www.asminternational.org), NACE International (www.nace.org), American Petroleum Institute (www.api.org), etc. Other sources includes The Welding Institute, UK (www.twi.co.uk), and Indian Air force training manuals, ASNT (www.asnt.org), the Canadian Standard Association (www.cas.com) and Canadian General Standard Board (CGSB) (www.tpsgc-pwgsc.gc.ca). - Rules for developing efficient welding designs and fabrication procedures - Expert advice for complying with international codes and standards from the American Welding Society, American Society of Mechanical Engineers, and The Welding Institute(UK) - Practical in-depth instruction for the selection of the materials incorporated in the joint, joint inspection, and the quality control for the final product.

Download or read book Handbook of Technical Diagnostics written by Horst Czichos and published by Springer Science & Business Media. This book was released on 2013-01-11 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents concepts, methods and techniques to examine symptoms of faults and failures of structures, systems and components and to monitor functional performance and structural integrity. The book is organized in five parts. Part A introduces the scope and application of technical diagnostics and gives a comprehensive overview of the physics of failure. Part B presents all relevant methods and techniques for diagnostics and monitoring: from stress, strain, vibration analysis, nondestructive evaluation, thermography and industrial radiology to computed tomography and subsurface microstructural analysis. Part C cores the principles and concepts of technical failure analysis, illustrates case studies, and outlines machinery diagnostics with an emphasis on tribological systems. Part D describes the application of structural health monitoring and performance control to plants and the technical infrastructure, including buildings, bridges, pipelines, electric power stations, offshore wind structures, and railway systems. And finally, Part E is an excursion on diagnostics in arts and culture. The book integrates knowledge of basic sciences and engineering disciplines with contributions from research institutions, academe, and industry, written by internationally known experts from various parts of the world, including Europe, Canada, India, Japan, and USA.

Download or read book Radiation Protection and Safety in Industrial Radiography written by International Atomic Energy Agency and published by . This book was released on 1999 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Report summarizes good and current state of the art practices in industrial radiography and provides technical advice on radiation protection and safety. It contains information explaining the responsibilities of regulatory authorities, operating organizations, workers, equipment manufacturers and client organizations, with the intention of enhancing radiation protection and safety.

Download or read book X Ray Equipment Maintenance and Repairs Workbook for Radiographers and Radiological Technologists written by Ian R. McClelland and published by World Health Organization. This book was released on 2004 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: The X-ray equipment maintenance and repairs workbook is intended to help and guide staff working with, and responsible for, radiographic equipment and installations in remote institutions where the necessary technical support is not available, to perform routine maintenance and minor repairs of equipment to avoid break downs. The book can be used for self study and as a checklist for routine maintenance procedures.

Download or read book Oxford Handbook of Clinical Diagnosis written by Huw Llewelyn and published by Oxford University Press, USA. This book was released on 2014 with total page 683 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook describes the diagnostic process clearly and logically, aiding medical students and others who wish to improve their diagnostic performance and to learn more about the diagnostic process.

Download or read book Parametric X Ray Radiation in Crystals written by Vladimir G. Baryshevsky and published by Springer Science & Business Media. This book was released on 2005-12-20 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: This systematic and comprehensive monograph is devoted to parametric X-ray radiation (PXR). This radiation is generated by the motion of electrons inside a crystal, whereby the emitted photons are diffracted by the crystal and the radiation intensity critically depends on the parameters of the crystal structure. Nowadays PXR is the subject of numerous theoretical and experimental studies throughout the world. The first part of the book is a theoretical treatment of PXR, which includes a new approach to describe the radiation process in crystals. The second part is a survey of PXR experimental results and the possible applications of PXR as a tool for crystal structure analysis and a source of tunable X-ray radiation.