Download or read book Industrial Thermoprocessing Equipment Particular Safety Requirements for Quenching Equipment written by British Standards Institute Staff and published by . This book was released on 2000-11-15 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: Furnaces, Heating equipment, Industrial, Production equipment, Heat engineering components, Quenching, Heat treatment, Equipment safety, Hazards

Download or read book Handbook of Burner Technologies for Industrial Furnaces written by Joachim G. Wünning and published by Vulkan-Verlag GmbH. This book was released on 2012-02-29 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: The demands made on the energy-efficiency and pollutant emissions of industrial furnaces are rising continuously and have high priority in view of the latest increases in energy prices and of the discussion of climate change for which CO2 emissions are at least partly responsible. Great importance is now attached to increasing energy-efficiency in a large range of industrial sectors, including the steel industry and companies operating heat-treatment installations. This work is intended to provide support for those persons responsible for the clean and efficient heating of industrial furnaces. The initial chapters of the Handbook of Burner Technology for Industrial Furnaces deal with the indispensable theoretical principles of combustion theory, fluid mechanics and heat transfer. Only those aspects which are of importance for burner technology are examined. The succeeding chapters then proceed on to burner technology as such, and focus on combustion-system concepts, analyze pollutant generation and reduction, and discuss the recovery of heat for use in combustion-air preheating, the most important provision for the enhancement of energy-efficiency. The "Industrial Burners" chapter outlines, with detailed examples, the essential types of industrial burners and their integration into the extremely diverse range of modern furnace-system concepts. his is then followed by chapters on standardization and legal requirements, more specialized and detailed literature, relevant research institutions, and an annex containing the relevant physical data. The book discusses the present-day state of technological development in a practically orientated manner. The reader is provided with a detailed view of all relevant principles, terms and processes in industrial combustion technology, and thus with important aids for his or her daily work. This compact-format book, with its plethora of information, is an indispensable reference source for all persons who are professionally involved in any way at all with the heating and combustion-systems of industrial furnaces.

Download or read book Heat Treating and Surface Engineering written by ASM Heat Treating Society. Conference and Exposition and published by ASM International. This book was released on 2003-01-01 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Pocket Manual for Thermprocess Technology written by and published by Vulkan-Verlag GmbH. This book was released on 1999 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This pocket manual provides a selective survey of available engineering for the product range of LOI Thermoprocess GmbH. Furthermore, important information material based on specialized literature is summarized. The pocket manual primarily focuses on engineering aspects. Information on process technology is limited to topics which concern all or most of all plant equipment (furnaces) in order not to exceed the pocket manual concept. Data is mainly provided numerically in tables in order to simplify direct calculable utilization. Diagrams are only used if they improve illustration or to feature the plant equipment (furnace) based origin of the data. The SI measuring units are used pragmatically. For most tables the conversion factor is directly assigned for the area in which the Anglo- American language prevails. The American notation is used for designation of magnitude of the numerical values.

Download or read book Fuel and Combustion Systems Safety written by John R. Puskar and published by John Wiley & Sons. This book was released on 2013-12-02 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical, easy-to-follow advice that saves lives Based on the author's thirty years of hands-on experience working in the field of industrial fuel systems and combustion equipment safety, this book integrates safety codes with practical, tested, and proven guidance that makes it viable to specify, operate, and maintain industrial fuel and combustion systems as safely as possible. Readers will learn about fuels, piping, combustion, controls, and risks from more than fifty "real-life stories" the author has integrated into each chapter so one can immediately see and understand the concepts presented. The incidents depicted resulted in forty-six deaths, hundreds of serious injuries, and billions of dollars in losses. Each example is followed by lessons learned, helping readers understand what could have been done to avoid the disaster or minimize the resulting destruction of life and property. The book begins with an introductory chapter that presents key concepts in industrial fuel and combustion systems safety. Next, chapters cover such topics as: Combustion and natural gas piping basics Gas supply system issues Gas piping repairs and cleaning Fuel trains and combustion equipment Boilers and their unique risks Controlling combustion risks: people, policy, equipment The final two chapters address risks related to facilities outside of the United States, as well as business contingency planning related to fuels and combustion equipment. The last chapter explains how to plan for and then respond quickly and effectively to fuel or combustion system incidents. Filled with practical, easy-to-follow advice that saves lives, Fuel and Combustion Systems Safety is an essential reference for everyone from equipment operators and maintenance personnel to corporate risk managers and global safety directors.

Download or read book Industrial Thermoprocessing Equipment Particular Safety Requirements for Hot Dip Galvanizing Thermoprocessing Equipment written by British Standards Institute Staff and published by . This book was released on 2000-04-15 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt: Furnaces, Heating equipment, Industrial, Production equipment, Heat engineering components, Hot-dip galvanizing, Hazards, Safety measures, Equipment safety, Occupational safety, Explosive atmospheres, Chemical reactions, Verification, Visual inspection (testing), Maintenance, Instructions for use

Download or read book Machinery written by European Commission. Directorate-General for Industry (DGIII) and published by . This book was released on 1999 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Industrial Thermoprocessing Equipment Safety Requirements for Combustion and Fuel Handling Systems written by British Standards Institute Staff and published by . This book was released on 1910-06-30 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: Furnaces, Heating equipment, Industrial, Production equipment, Heat engineering components, Burners, Equipment safety, Occupational safety, Hazards, Safety measures, Safety devices, Fuels, Pipework systems, Marking, Instructions for use, Ignition systems (heat engineering), Handbooks, Classification systems

Download or read book Handbook of Thermoprocessing Technologies written by Axel von Starck and published by Vulkan-Verlag GmbH. This book was released on 2005 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Europe, thermoprocessing is the third largest energy consumption sector following traffic and room heating. Its structure is very much diversified and complex. Therefore it is split into a large number of subdivisions, each of them having a high importance for the industrial economy. Accordingly we find the application know-how for the design and the execution of respective equipment represented by a multitude of small but very specialized and significant companies and their experts. As a result there was only little chance to find a comprehensive survey of the practical side of this technology so far. This gap is now filled by the new "Handbook of Thermoprocessing Technologies" based on the contributions of many highly experienced, outstanding engineers working in this field. The main intention of this book is the presentation of practical thermal processing for the improvement of material and parts in industrial application. Additionally, a summary of respective thermal and material science fundamentals is given as well as basic fuel-related and electrical engineering knowledge for this technology and finally design aspects, components and safety requirements for the necessary heating installations are covered. In conclusion, a very wide and competent state of the art description is now available for all manufacturers and users of thermoprocessing equipment. But also specialists from neighbouring fields, students and all those who are generally interested in this important but widely unknown technology will find a quick survey here as well as a very profound expertise.

Download or read book Industrial Thermoprocessing Equipment written by Standards South Africa and published by . This book was released on 2008 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Industrial Furnaces and Associated Processing Equipment written by International Organization for Standardization and published by . This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Non Ferrous Metal Powders written by Oleg D Neikov and published by Elsevier. This book was released on 2009-02-24 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: The manufacture and use of the powders of non-ferrous metals has been taking place for many years in what was previously Soviet Russia, and a huge amount of knowledge and experience has built up in that country over the last forty years or so. Although accounts of the topic have been published in the Russian language, no English language account has existed until now. Six prominent academics and industrialists from the Ukraine and Russia have produced this highly-detailed account which covers the classification, manufacturing methods, treatment and properties of the non-ferrous metals ( aluminium, titanium, magnesium, copper, nickel, cobalt, zinc, cadmium, lead, tin, bismuth, noble metals and earth metals). The result is a formidable reference source for those in all aspects of the metal powder industry. Covers the manufacturing methods, properties and importance of the following metals: aluminium, titanium, magnesium, copper, nickel, cobalt, zinc, cadmium, noble metals, rare earth metals, lead, tin and bismuth Expert Russian team of authors, all very experienced English translation and update of book previously published in Russian

Download or read book Heat Treatment and Properties of Iron and Steel written by Samuel Jacob Rosenberg and published by . This book was released on 1966 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Government Reports Announcements Index written by and published by . This book was released on 1996 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Noise news International written by and published by . This book was released on 1993 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Materials Australasia written by and published by . This book was released on 1989 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Non Thermal Processing Technologies for the Fruit and Vegetable Industry written by M. Selvamuthukumaran and published by CRC Press. This book was released on 2022-11-07 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fruits and vegetables rapidly spoil due to growth of microorganisms, which further render them unsafe for human consumption. The traditional methods of food preservation, which involves drying, canning, salting, curing, and chemical preservation, can significantly affect food quality by diminishing nutrients during heat processing. This can alter the texture of the products, leave chemical residues in the final processed products, which in turn has greater impact over consumers' safety and health concerns. To combat this problem, various current non-thermal food processing techniques can be employed in fruit and vegetable processing industries to enhance consumer satisfaction for delivering wholesome food products to the market, thus increasing demand. Non-Thermal Processing Technologies for the Fruit and Vegetable Industry introduces the various non-thermal food processing techniques especially employed for fruits and vegetables processing industries; it deals with the effect of several non-thermal processing techniques on quality aspects of processed fruits and vegetable products and keeping quality and consumer acceptability. Key Features: Describes the high-pressure processing techniques employed for processing fruit and vegetable based beverages Discusses the safety aspects of using various innovative non-thermal based technologies for the fruits and vegetables processing industries. Explains ozone application, cold plasma, ultrasound and UV irradiation for fruits and vegetables with their advantages, disadvantages, process operations, mechanism for microbes in activation etc. Presents the commercially viable and economically feasible non-thermal processing technologies for fruit and vegetable industry. This book addresses professors, scientists, food engineers, research scholars, students and industrial personnel for stability enhancement of fruit- and vegetable-based food products by using novel non-thermal food processing techniques. Readers will come to know the current and emerging trends in use of non-thermal processing techniques for its application in several fruit- and vegetable-based food processing industries.