Download or read book Industrial Process Identification and Control Design written by Tao Liu and published by Springer Science & Business Media. This book was released on 2011-11-16 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Process Identification and Control Design is devoted to advanced identification and control methods for the operation of continuous-time processes both with and without time delay, in industrial and chemical engineering practice. The simple and practical step- or relay-feedback test is employed when applying the proposed identification techniques, which are classified in terms of common industrial process type: open-loop stable; integrating; and unstable, respectively. Correspondingly, control system design and tuning models that follow are presented for single-input-single-output processes. Furthermore, new two-degree-of-freedom control strategies and cascade control system design methods are explored with reference to independently-improving, set-point tracking and load disturbance rejection. Decoupling, multi-loop, and decentralized control techniques for the operation of multiple-input-multiple-output processes are also detailed. Perfect tracking of a desire output trajectory is realized using iterative learning control in uncertain industrial batch processes. All the proposed methods are presented in an easy-to-follow style, illustrated by examples and practical applications. This book will be valuable for researchers in system identification and control theory, and will also be of interest to graduate control students from process, chemical, and electrical engineering backgrounds and to practising control engineers in the process industry.
Download or read book Industrial Process Identification written by Ai Hui Tan and published by Springer. This book was released on 2019-01-01 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Process Identification brings together the latest advances in perturbation signal design. It describes the approaches to the design process that are relevant to industries. The authors’ discussion of several software packages (Frequency Domain System Identification Toolbox, prs, GALOIS, multilev_new, and Input-Signal-Creator) will allow readers to understand the different designs in industries and begin designing common classes of signals. The authors include two case studies that provide a balance between the theory and practice of these designs: the identification of a direction-dependent electronic nose system; and the identification of a multivariable cooling system with time-varying delay. Major aspects of signal design such as the formulation of suitable specifications in the face of practical constraints, the classes of designs available, the various objectives necessitating separate treatments when dealing with nonlinear systems, and extension to multi-input scenarios, are discussed. Codes, including some that will produce simulated data, are included to help readers replicate the results described. Industrial Process Identification is a powerful source of information for control engineers working in the process and communications industries seeking guidance on choosing identification software tools for use in practical experiments and case studies. The book will also be of interest to academic researchers and students working in electrical, mechanical and communications engineering and the application of perturbation signal design. Advances in Industrial Control reports and encourages the transfer of technology in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. The series offers an opportunity for researchers to present an extended exposition of new work in all aspects of industrial control.
Download or read book Advanced Process Identification and Control written by Enso Ikonen and published by CRC Press. This book was released on 2001-10-02 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: A presentation of techniques in advanced process modelling, identification, prediction, and parameter estimation for the implementation and analysis of industrial systems. The authors cover applications for the identification of linear and non-linear systems, the design of generalized predictive controllers (GPCs), and the control of multivariable systems.
Download or read book Identification and Control of Sheet and Film Processes written by Andrew P. Featherstone and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sheet and film processes include coating, papermaking, metal rolling, and polymer film extrusion. Products produced by these processes include paper, bumper stickers, plastic bags, windshield safety glass, and sheet metal. The total capitalization of industries that rely on these processes is well over $ 500 billion worldwide. These processes are notorious for being difficult to control. The goal of this book is to present the theoretical background and practical techniques for the identification and control of sheet and film processes. It is explained why many existing industrial control systems perform poorly for sheet and film processes. Identification and control algorithms are described and illustrated which provide consistent and reliable product quality. These algorithms include an experimental design technique that ensures that informative data are collected during input-output experimentation, model identification techniques that produce a process model and an estimate of its accuracy, and control techniques that take into account actuator constraints as well as robustness to model uncertainties. The algorithms covered in this book are truly the state of the art. Variations on some of the algorithms have been implemented on industrial sheet and film processes. Other algorithms are in various stages of implementation. All of the algorithms have been applied to realistic simulation models constructed from industrial plant data; many of these studies are included in this book.
Download or read book Process Identification and PID Control written by Su Whan Sung and published by John Wiley & Sons. This book was released on 2009-07-23 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Identification and PID Control enables students and researchers to understand the basic concepts of feedback control, process identification, autotuning as well as design and implement feedback controllers, especially, PID controllers. The first The first two parts introduce the basics of process control and dynamics, analysis tools (Bode plot, Nyquist plot) to characterize the dynamics of the process, PID controllers and tuning, advanced control strategies which have been widely used in industry. Also, simple simulation techniques required for practical controller designs and research on process identification and autotuning are also included. Part 3 provides useful process identification methods in real industry. It includes several important identification algorithms to obtain frequency models or continuous-time/discrete-time transfer function models from the measured process input and output data sets. Part 4 introduces various relay feedback methods to activate the process effectively for process identification and controller autotuning. Combines the basics with recent research, helping novice to understand advanced topics Brings several industrially important topics together: Dynamics Process identification Controller tuning methods Written by a team of recognized experts in the area Includes all source codes and real-time simulated processes for self-practice Contains problems at the end of every chapter PowerPoint files with lecture notes available for instructor use
Download or read book Process Control Design for Industrial Applications written by Dumitru Popescu (Writer on computer science and engineering) and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the most important methods used for the design of digital controls implemented in industrial applications. The best modelling and identification techniques for dynamical systems are presented as well as the algorithms for the implementation of the modern solutions of process control. The proposed described methods are illustrated by various case studies for the main industrial sectors There exist a number of books related each one to a single type of control, yet usually without comparisons for various industrial sectors. Some other books present modelling and identification methods or signal processing. This book presents the methods to solve all the problems linked to the design of a process control without the need to find additional information.
Download or read book From Plant Data to Process Control written by Liuping Wang and published by CRC Press. This book was released on 2000-08-31 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process engineering spans industrial applications in the manufacturing sector from petrochemical to polymer to mineral production. From Plant Data to Process Control covers the most up-to-date techniques and algorithms in the area of process identification (PID) and process control, two key components of process engineering, essential for optimizing production systems. It examines both the theoretical advances in process design and control theory, and a wide variety of implementations. A wide variety of approaches are presented for building models of dynamical systems based on observed data (process identification) and for making the output of a system behave in a desired fashion by properly selecting the process input (process control).
Download or read book Identification and Classical Control of Linear Multivariable Systems written by V. Dhanya Ram and published by Cambridge University Press. This book was released on 2022-10-31 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book trains engineering students to identify multivariable transfer function models and design classical controllers for such systems.
Download or read book Advanced Process Identification and Control written by Enso Ikonen and published by CRC Press. This book was released on 2001-10-02 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: A presentation of techniques in advanced process modelling, identification, prediction, and parameter estimation for the implementation and analysis of industrial systems. The authors cover applications for the identification of linear and non-linear systems, the design of generalized predictive controllers (GPCs), and the control of multivariable
Download or read book Multivariable System Identification For Process Control written by Y. Zhu and published by Elsevier. This book was released on 2001-10-08 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Systems and control theory has experienced significant development in the past few decades. New techniques have emerged which hold enormous potential for industrial applications, and which have therefore also attracted much interest from academic researchers. However, the impact of these developments on the process industries has been limited.The purpose of Multivariable System Identification for Process Control is to bridge the gap between theory and application, and to provide industrial solutions, based on sound scientific theory, to process identification problems. The book is organized in a reader-friendly way, starting with the simplest methods, and then gradually introducing more complex techniques. Thus, the reader is offered clear physical insight without recourse to large amounts of mathematics. Each method is covered in a single chapter or section, and experimental design is explained before any identification algorithms are discussed. The many simulation examples and industrial case studies demonstrate the power and efficiency of process identification, helping to make the theory more applicable. MatlabTM M-files, designed to help the reader to learn identification in a computing environment, are included.
Download or read book Soft Computing in Engineering Design and Manufacturing written by Pravir K. Chawdhry and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Soft Computing has emerged as an important approach towards achieving intelligent computational paradigms where key elements are learning from experience in the presence of uncertainties, fuzzy belief functioos, and ·evolutioo of the computing strategies of the learning agent itself. Fuzzy, neural and evolutionary computing are the three major themes of soft computing. The book presents original research papers dealing with the theory of soft computing and its applicatioos in engineering design and manufacturing. The methodologies have been applied to a large variety of real life problems. Applicatioo of soft computing has provided the opportunity to integrate human like 'vagueness' and real life 'uncertainty' to an otherwise 'hard' computer programme. Now, a computer programme can learn, adapt, and evolve using soft computing. The book identifies the strengths and Iimitatioos of soft cOOlputing techniques, particularly with reference to their engineering applications. The applications range fran design optimisatioo to scheduling and image analysis. Goal optimisatioo with incomplete infmnatioo and under uncertainty is the key to solving real-life problems in design and manufacturing. Soft computing techniques presented in this book address these issues. Computatiooal complexity and efficient implementatioo of these techniques are also major concerns for realising useful industrial applications of soft computing. The different parts in the book also address these issues. The book cootains 9 parts, 8 of which are based 00 papers fran the '2nd On-line World Conference 00 Soft Computing in Engineering Design and Manufacture (WSC2),.
Download or read book From Plant Data to Process Control written by Liuping Wang and published by Taylor & Francis. This book was released on 2004-02-03 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process engineering spans industrial applications in the manufacturing sector from petrochemical to polymer to mineral production. From Plant Data to Process Control covers the most up-to-date techniques and algorithms in the area of process identification (PID) and process control, two key components of process engineering, essential for optimizing production systems. It examines both the theoretical advances in process design and control theory, and a wide variety of implementations. A wide variety of approaches are presented for building models of dynamical systems based on observed data (process identification) and for making the output of a system behave in a desired fashion by properly selecting the process input (process control).
Download or read book PID Control written by Michael A Johnson and published by Springer Science & Business Media. This book was released on 2005-12-28 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effectiveness of proportional-integral-derivative (PID) controllers for a large class of process systems has ensured their continued and widespread use in industry. Similarly there has been a continued interest from academia in devising new ways of approaching the PID tuning problem. To the industrial engineer and many control academics this work has previously appeared fragmented; but a key determinant of this literature is the type of process model information used in the PID tuning methods. PID Control presents a set of coordinated contributions illustrating methods, old and new, that cover the range of process model assumptions systematically. After a review of PID technology, these contributions begin with model-free methods, progress through non-parametric model methods (relay experiment and phase-locked-loop procedures), visit fuzzy-logic- and genetic-algorithm-based methods; introduce a novel subspace identification method before closing with an interesting set of parametric model techniques including a chapter on predictive PID controllers. Highlights of PID Control include: an introduction to PID control technology features and typical industrial implementations; chapter contributions ordered by the increasing quality of the model information used; novel PID control concepts for multivariable processes. PID Control will be useful to industry-based engineers wanting a better understanding of what is involved in the steps to a new generation of PID controller techniques. Academics wishing to have a broader perspective of PID control research and development will find useful pedagogical material and research ideas in this text.
Download or read book PID Control in the Third Millennium written by Ramon Vilanova and published by Springer Science & Business Media. This book was released on 2012-02-03 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: The early 21st century has seen a renewed interest in research in the widely-adopted proportional-integral-differential (PID) form of control. PID Control in the Third Millennium provides an overview of the advances made as a result. Featuring: new approaches for controller tuning; control structures and configurations for more efficient control; practical issues in PID implementation; and non-standard approaches to PID including fractional-order, event-based, nonlinear, data-driven and predictive control; the nearly twenty chapters provide a state-of-the-art resumé of PID controller theory, design and realization. Each chapter has specialist authorship and ideas clearly characterized from both academic and industrial viewpoints. PID Control in the Third Millennium is of interest to academics requiring a reference for the current state of PID-related research and a stimulus for further inquiry. Industrial practitioners and manufacturers of control systems with application problems relating to PID will find this to be a practical source of appropriate and advanced solutions.
Download or read book Process Control Design for Industrial Applications written by Dumitru Popescu and published by John Wiley & Sons. This book was released on 2017-04-12 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the most important methods used for the design of digital controls implemented in industrial applications. The best modelling and identification techniques for dynamical systems are presented as well as the algorithms for the implementation of the modern solutions of process control. The proposed described methods are illustrated by various case studies for the main industrial sectors There exist a number of books related each one to a single type of control, yet usually without comparisons for various industrial sectors. Some other books present modelling and identification methods or signal processing. This book presents the methods to solve all the problems linked to the design of a process control without the need to find additional information.
Download or read book Introduction to Process Control written by Jose A. Romagnoli and published by CRC Press. This book was released on 2020-07-14 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Process Control, Third Edition continues to provide a bridge between traditional and modern views of process control by blending conventional topics with a broader perspective of integrated process operation, control, and information systems. Updated and expanded throughout, this third edition addresses issues highly relevant to today’s teaching of process control: Discusses smart manufacturing, new data preprocessing techniques, and machine learning and artificial intelligence concepts that are part of current smart manufacturing decisions Includes extensive references to guide the reader to the resources needed to solve modeling, classification, and monitoring problems Introduces the link between process optimization and process control (optimizing control), including the effect of disturbances on the optimal plant operation, the concepts of steady-state and dynamic back-off as ways to quantify the economic benefits of control, and how to determine an optimal transition policy during a planned production change Incorporates an introduction to the modern architectures of industrial computer control systems with real case studies and applications to pilot-scale operations Analyzes the expanded role of process control in modern manufacturing, including model-centric technologies and integrated control systems Integrates data processing/reconciliation and intelligent monitoring in the overall control system architecture Drawing on the authors’ combined 60 years of teaching experiences, this classroom-tested text is designed for chemical engineering students but is also suitable for industrial practitioners who need to understand key concepts of process control and how to implement them. The text offers a comprehensive pedagogical approach to reinforce learning and presents a concept first followed by an example, allowing students to grasp theoretical concepts in a practical manner and uses the same problem in each chapter, culminating in a complete control design strategy. A vast number of exercises throughout ensure readers are supported in their learning and comprehension. Downloadable MATLAB® toolboxes for process control education as well as the main simulation examples from the book offer a user-friendly software environment for interactively studying the examples in the text. These can be downloaded from the publisher’s website. Solutions manual is available for qualifying professors from the publisher.
Download or read book Computer Aided Systems Theory EUROCAST 2015 written by Roberto Moreno-Díaz and published by Springer. This book was released on 2015-12-17 with total page 887 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume constitutes the papers presented at the 15th International Conference on Computer Aided Systems Theory, EUROCAST 2015, held in February 2015 in Las Palmas de Gran Canaria, Spain. The total of 107 papers presented were carefully reviewed and selected for inclusion in the book. The contributions are organized in topical sections on Systems Theory and Applications; Modelling Biological Systems; Intelligent Information Processing; Theory and Applications of Metaheuristic Algorithms; Computer Methods, Virtual Reality and Image Processing for Clinical and Academic Medicine; Signals and Systems in Electronics; Model-Based System Design, Verification, and Simulation; Digital Signal Processing Methods and Applications; Modelling and Control of Robots; Mobile Platforms, Autonomous and Computing Traffic Systems; Cloud and Other Computing Systems; and Marine Sensors and Manipulators.
