Download or read book Introduction to Industrial Minerals written by D.A.C. Manning and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Industrial Minerals introduces the reader to the subject of the new mineral raw materials that our society demands. It emphasizes the way in which, in order to satisfy the consumer, the requirements of industry control mineral exploitation, and the way fundamental mineral properties are exploited for particular applications. It describes aggregates, industrial clays and raw materials for the chemical industry. The need for high temperature processing is addressed with a chapter on interpretation and use of mineralogical phase diagrams and time-temperature-transformation diagrams. These are then applied in separate chapters on the manufacture of glass, cement, brick clays and refractories. Evaluation of geological reserves is described in the context of computer modelling of deposit quality, and the final chapter considers the use of a site after extraction, emphasizing the requirements for waste disposal.
Download or read book Ore Geology and Industrial Minerals written by Anthony M. Evans and published by John Wiley & Sons. This book was released on 2013-07-03 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Much new data and many new ideas have emerged in the area of oregeology and industrial minerals since publication of the secondedition of this text in 1987. The overriding philosophy behind thisnew edition is the inclusion and integration of this new materialwithin the established framework of the text. The third edition isre-presented in the modern double-column format. Non-metallic deposits of industrial and bulk materials are fullycovered to meet the changing emphasis of courses in appliedgeology. In addition, chapter 1 has been considerably enlarged toinclude a section on mineral economics covering metals, industrialminerals and bulk materials. In this section, the various aspectsof economic exploitation of industrial and bulk materials arecompared with those of metallic deposits. Other major revisions andadditions include a section on fluid inclusions, expansion of thesection on wall rock alteration, expansion of the material onisotope studies, and the inclusion of a section on hydraulicfracturing and seismic pumping.
Download or read book Applied Mineralogy in the Mining Industry written by W. Petruk and published by Elsevier. This book was released on 2000-11-29 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Techniques of performing applied mineralogy investigations, and applications and capabilities of recently developed instruments for measuring mineral properties are explored in this book intended for practicing applied mineralogists, students in mineralogy and metallurgy, and mineral processing engineers. The benefits of applied mineralogy are presented by using in-depth applied mineralogy studies on base metal ores, gold ores, porphyry copper ores, iron ores and industrial minerals as examples. The chapter on base metal ores includes a discussion on the effects of liberation, particle sizes and surfaces coatings of Pb, Cu, Fe, Ca and So4- on the recoveries of sphalerite, galena and chalcopyrite. The chapter on gold discusses various methods of determining the quantities of gold in different minerals, including 'invisible' gold in pyrite and arsenopyrite, so that a balance of the distribution of gold among the minerals can be calculated. This book also discusses the roles of pyrite, oxygen, moisture and bacterial (thiobacillus ferrooxidans) on reactions that produce acidic drainage from tailings piles, and summarizes currently used and proposed methods of remediation of acidic drainage.
Download or read book Economic Geology written by Walter L. Pohl and published by John Wiley & Sons. This book was released on 2011-03-03 with total page 725 pages. Available in PDF, EPUB and Kindle. Book excerpt: Humanity’s ever-increasing hunger for mineral raw materials, caused by a growing global population and ever increasing standards of living, has resulted in economic geology becoming a subject of urgent importance. This book provides a broad panorama of mineral deposits, covering their origin and geological characteristics, the principles of the search for ores and minerals, and the investigation of newly found deposits. Practical and environmental issues that arise during the life cycle of a mine and after its closure are addressed, with an emphasis on sustainable and "green" mining. The central scientific theme of the book is to place the extraordinary variability of mineral deposits in the frame of fundamental geological processes. The book is written for earth science students and practicing geologists worldwide. Professionals in administration, resource development, mining, mine reclamation, metallurgy, and mineral economics will also find the text valuable. Economic Geology is a fully revised translation of the the fifth edition of the German language text Mineralische und Energie-Rohstoffe. Additional resources for this book can be found at: www.wiley.com/go/pohl/geology. The author's website can be found at: http://www.walter-pohl.com.
Download or read book Ores to Metals written by James E. Fell, Jr. and published by University Press of Colorado. This book was released on 2009-06-30 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive treatment of the smelting industry of Colorado, originally published in 1979, is now back in print with a new preface by the author. Packed with fascinating statistics and mining data, Ores to Metals details the people, technologies, and business decisions that have shaped the smelting industry in the Rockies. Although mining holds more of the glamour for those in and interested in the minerals industry, smelters have continuously played a critical role in the industry’s evolution since their introduction in Colorado in the 1860s. At that time, miners desperately needed new technology to recover gold and silver from ores resistant to milling. Beginning as small independent enterprises, progressing to larger integrated firms working in urban centers, and finally following a trend toward mergers, the entire industry was absorbed into one large holding company—the American Smelting and Refining Company. Over time, fortunes were won and lost, business success was converted to political success, and advances were made in science and metallurgy. Drawing on archival material, Fell expertly presents the triumphs and troubles of the entrepreneurs who built one of the great industries of the West.
Download or read book Evolutionary and Revolutionary Technologies for Mining written by National Research Council and published by National Academies Press. This book was released on 2002-03-14 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Office of Industrial Technologies (OIT) of the U. S. Department of Energy commissioned the National Research Council (NRC) to undertake a study on required technologies for the Mining Industries of the Future Program to complement information provided to the program by the National Mining Association. Subsequently, the National Institute for Occupational Safety and Health also became a sponsor of this study, and the Statement of Task was expanded to include health and safety. The overall objectives of this study are: (a) to review available information on the U.S. mining industry; (b) to identify critical research and development needs related to the exploration, mining, and processing of coal, minerals, and metals; and (c) to examine the federal contribution to research and development in mining processes.
Download or read book Industrial Minerals and Their Uses written by Peter A. Ciullo and published by William Andrew. This book was released on 1996-12-31 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: This multi-authored handbook is a unique cross-industry resource for formulators and compounders, and an invaluable reference for the producers of formulated commodities and industrial minerals. Monographs on each of the common functional industrial mineralsùasbestos, barite, calcium carbonate, diatomite, feldspar, gypsum, hormite, kaolin, mica, nepheline syenite, perlite, pyrophyllite, silica, smectite, talc, vermiculite, wollastonite, and zeoliteùinclude an overview of natural and commercial varieties, market size, and application areas. These are supported by descriptions of mineral structures and the wedding of minerals and chemicals through mineral surface modification. This orientation to the minerals and their uses forms the foundation for chapters where they are presented in the context of the overall technology of various consuming industries. Each of these industry-specific presentations covers both the chemical and mineral raw materials used by the formulator, how these are combined, and relevant test methods. These chapters serve a dual purpose. Each clarifies for technologists the function and value of the mineral constituents of their products. Equally important, they provide a primer on the technology of industries other than their own, so that raw material, formulation, processing and testing considerations can be compared and contrasted.The book concludes with a formulary demonstrating how specific mineral and chemical ingredients are actually compounded in major application areas, and technical data on scores of commercial mineral products.
Download or read book Ores and Minerals written by John Wykeham Barnes and published by . This book was released on 1988 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Industrial Minerals and Extractive Industry Geology written by P. W. Scott and published by Geological Society of London. This book was released on 2002 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Minerals Critical Minerals and the U S Economy written by National Research Council and published by National Academies Press. This book was released on 2008-03-11 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: Minerals are part of virtually every product we use. Common examples include copper used in electrical wiring and titanium used to make airplane frames and paint pigments. The Information Age has ushered in a number of new mineral uses in a number of products including cell phones (e.g., tantalum) and liquid crystal displays (e.g., indium). For some minerals, such as the platinum group metals used to make cataytic converters in cars, there is no substitute. If the supply of any given mineral were to become restricted, consumers and sectors of the U.S. economy could be significantly affected. Risks to minerals supplies can include a sudden increase in demand or the possibility that natural ores can be exhausted or become too difficult to extract. Minerals are more vulnerable to supply restrictions if they come from a limited number of mines, mining companies, or nations. Baseline information on minerals is currently collected at the federal level, but no established methodology has existed to identify potentially critical minerals. This book develops such a methodology and suggests an enhanced federal initiative to collect and analyze the additional data needed to support this type of tool.
Download or read book The Ore Minerals and Their Intergrowths written by Paul Ramdohr and published by . This book was released on 1980 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Industrial Minerals and Rocks written by American Institute of Mining, Metallurgical, and Petroleum Engineers and published by . This book was released on 1960 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Minerals of Arkansas written by Arkansas. Bureau of Mines, Manufactures, and Agriculture and published by . This book was released on 1925 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mineral Deposits of Finland written by Wolfgang Derek Maier and published by Elsevier. This book was released on 2015-05-23 with total page 819 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mineral Deposits of Finland is the only up-to-date and inclusive reference available that fully captures the scope of Finland's mineral deposits and their economic potential. Finland hosts Europe's most mature rocks and large cratonic blocks, analogous to western Australia and Southern Africa, which are the most mineralized terrains on Earth.Authored by the world's premier experts on Finnish mineral exploration and mining, Mineral Deposits of Finland offers a thorough summary of the mineral deposits and their petrogenesis, helping readers to map, explore, and identify Finland's renewed potential for mineral exploration and extraction. - Presents a thoroughly inclusive catalogue of Finland's mineral deposits and their economic potential - Features full-color figures, illustrations, working examples and photographs to aid the reader in retaining key concepts to underscore major advances in the exploration of Finland's mineral resources - Offers concise chapter summaries authored by leaders in geological research, which provide accessible overviews of deposit classes
Download or read book Handbook of Clay Science written by and published by Newnes. This book was released on 2013-07-23 with total page 1748 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of the Handbook of Clay Science published in 2006 assembled the scattered literature on the varied and diverse aspects that make up the discipline of clay science. The topics covered range from the fundamental structures (including textures) and properties of clays and clay minerals, through their environmental, health and industrial applications, to their analysis and characterization by modern instrumental techniques. Also included are the clay-microbe interaction, layered double hydroxides, zeolites, cement hydrates, and genesis of clay minerals as well as the history and teaching of clay science. The 2e adds new information from the intervening 6 years and adds some important subjects to make this the most comprehensive and wide-ranging coverage of clay science in one source in the English language. - Provides up-to-date, comprehensive information in a single source - Covers applications of clays, as well as the instrumental analytical techniques - Provides a truly multidisciplinary approach to clay science
Download or read book Aluminum Ore written by Robin S. Gendron and published by UBC Press. This book was released on 2013-09-28 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the key component in aluminum production, bauxite became one of the most important minerals of the last one hundred years. But its effects on people and economies varied broadly – for some it meant jobs, progress, or a political advantage over rival nations but for many others, it meant exploitation, pollution, or the destruction of a way of life. Aluminum Ore explores the often overlooked history of bauxite in the twentieth century, and in doing so examines the forces that shaped the time, from the mineral’s strategic development in the First World War and throughout the Cold War, to its role in the globalization of markets, as companies from the northern hemisphere vied for the resources of the south. In this wide-ranging collection, scholars from around the world consider multiple international perspectives on this history – from Guinea to Nazi Germany to Jamaica – all while examining the central place of one commodity in a time of change.
Download or read book Ore Deposit Geology written by John Ridley and published by Cambridge University Press. This book was released on 2013-07-04 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mapping closely to how ore deposit geology is now taught, this textbook systematically describes and illustrates the major ore deposit types, linking this to their settings in the crust and the geological factors behind their formation. Written for advanced undergraduate and graduate students with a basic background in the geosciences, it provides a balance of practical information and coverage of the relevant geological sciences, including petrological, geochemical, hydrological and tectonic processes. Important theory is summarized without unnecessary detail and integrated with students' learning in other topics, including magmatic processes and sedimentary geology, enabling students to make links across the geosciences. Students are supported by further reading, a comprehensive glossary, and problems and review questions that test the application of theoretical approaches and encourage students to use what they have learnt. A website includes visual resources and combines with the book to provide students and instructors with a complete learning package.
