Download or read book Industrial Coal Gasification Technologies Covering Baseline and High Ash Coal written by Martin Gräbner and published by John Wiley & Sons. This book was released on 2014-08-18 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ongoing discussion about reaching the "peak-oil point" (maximal delivery rate with conventional methods) emphasizes a fundamental change of the frame conditions of oil-based basic products. The alternative with the largest potential is the use of coal. Coal gasification is the production of coal gas (a mixture of mainly hydrogen and carbon monoxide) from coal adding agents like steam/water and oxygen, which can be used in a number of industrial processes (e.g. hydroformulation and Fischer-Tropsch process). Many different kinds of coal do naturally occur, and due to shrinking natural resources, there has been a substantial gain of interest in poor, ash-rich coal. Beside the quality of coal, there is a number of other parameters influencing the efficiency of coal gasification, such as temperature, pressure, and reactor type. Although several books dealing with the subject of gasification have recently been published, few are strictly focussed on coal as feedstock. This monograph provides the reader with the necessary chemical background on coal gasification. Several types of coal (baseline coal and ash-rich coal) are compared systematically, pointing out the technological efforts achieved so far to overcome this challenge. Using a new, innovative order scheme to evaluate the gasification process at a glance (the ternary diagram), the complex network of chemistry, engineering, and economic needs can be overviewed in a highly efficient way. This book is a must-have for Chemical and Process Engineers, Engineering Students, as well as Scientists in the Chemical Industry.
Download or read book Integrated Gasification Combined Cycle IGCC Technologies written by Ting Wang and published by Woodhead Publishing. This book was released on 2016-11-26 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrated Gasification Combined Cycle (IGCC) Technologies discusses this innovative power generation technology that combines modern coal gasification technology with both gas turbine and steam turbine power generation, an important emerging technology which has the potential to significantly improve the efficiencies and emissions of coal power plants. The advantages of this technology over conventional pulverized coal power plants include fuel flexibility, greater efficiencies, and very low pollutant emissions. The book reviews the current status and future developments of key technologies involved in IGCC plants and how they can be integrated to maximize efficiency and reduce the cost of electricity generation in a carbon-constrained world. The first part of this book introduces the principles of IGCC systems and the fuel types for use in IGCC systems. The second part covers syngas production within IGCC systems. The third part looks at syngas cleaning, the separation of CO2 and hydrogen enrichment, with final sections describing the gas turbine combined cycle and presenting several case studies of existing IGCC plants. Provides an in-depth, multi-contributor overview of integrated gasification combined cycle technologies Reviews the current status and future developments of key technologies involved in IGCC plants Provides several case studies of existing IGCC plants around the world
Download or read book Advances in IC Engines and Combustion Technology written by Ashwani K. Gupta and published by Springer Nature. This book was released on 2020-08-18 with total page 939 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select peer-reviewed proceedings of the 26th National Conference on IC Engines and Combustion (NCICEC) 2019 which was organised by the Department of Mechanical Engineering, National Institute of Technology Kurukshetra under the aegis of The Combustion Institute-Indian Section (CIIS). The book covers latest research and developments in the areas of combustion and propulsion, exhaust emissions, gas turbines, hybrid vehicles, IC engines, and alternative fuels. The contents include theoretical and numerical tools applied to a wide range of combustion problems, and also discusses their applications. This book can be a good reference for engineers, educators and researchers working in the area of IC engines and combustion.
Download or read book Syngas Production Status and Potential for Implementation in Russian Industry written by Vladimir Litvinenko and published by Springer. This book was released on 2017-11-03 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the assessment of different coal gasification technologies for the utilization of Russian coals with analyses of economically feasible process chains for preparation of marketable products from high-ash coals. The work presented is important in view of the general competitiveness that marks the future of coal in the world. As the cheapest form of fuel (in comparable terms) coal will undoubtedly be in demand resources in the world. The book consists of parts which include an overview about the major coal characteristics, detailed discussion of fundamental aspects of gasification technologies and gasifiers, an introduction into annex concepts, an overview about different technologies of syngas utilization, technical and economic assessment of several coal-to-liquid and coal-to-chemicals routes, and feasibility demonstration for selected process chains. This book is addressed to the management and engineers of Russian coal companies and scientific staff of Russian research institutions working in the field of coal utilization.
Download or read book 30th European Symposium on Computer Aided Chemical Engineering written by Sauro Pierucci and published by Elsevier. This book was released on 2020-10-23 with total page 2119 pages. Available in PDF, EPUB and Kindle. Book excerpt: 30th European Symposium on Computer Aided Chemical Engineering, Volume 47 contains the papers presented at the 30th European Symposium of Computer Aided Process Engineering (ESCAPE) event held in Milan, Italy, May 24-27, 2020. It is a valuable resource for chemical engineers, chemical process engineers, researchers in industry and academia, students, and consultants for chemical industries. Presents findings and discussions from the 30th European Symposium of Computer Aided Process Engineering (ESCAPE) event Offers a valuable resource for chemical engineers, chemical process engineers, researchers in industry and academia, students, and consultants for chemical industries
Download or read book Gasification for Low grade Feedstock written by Yongseung Yun and published by BoD – Books on Demand. This book was released on 2018-07-11 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most coveted energy forms nowadays are gas in nature and electricity due to their environmental cleanness and convenience. Recently, gasification market trend is starting to switch to low-grade feedstock such as biomass, wastes, and low-rank coal that are still not properly utilized. In this sense, the most promising area of development in gasification field lies in low-grade feedstock that should be converted to more user-friendly gas or electricity form in utilization. This book tried to shed light on the works on gasification from many parts of the world and thus can feel the technology status and the areas of interest regarding gasification for low-grade feedstock.
Download or read book Polygeneration with Polystorage written by Kaveh Rajab Khalilpour and published by Academic Press. This book was released on 2018-11-27 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polygeneration with Polystorage: For Energy and Chemicals addresses the problem of both traditional and dispersed generation with a broad, multidisciplinary perspective. As the first book to thoroughly focus on the topic of polygeneration, users will find the problem presented from different scientific and technical domains down to both macro and micro levels. Detailed analyses and state-of-the-art developments in specific fields are included, focusing on storage in conventional energy supply chains and demand-side renewable polygeneration systems, management advice and the necessary market mechanisms needed to support them. This reference is useful for academics and professionals in conventional and unconventional energy systems. Includes an outlined framework towards polygeneration and polystorage down to both micro and macro levels Contains fluid and continuous chapters that provide detailed analysis and a review of the state-of-the-art developments in specific fields Addresses the wider global view of research advancement and potential in the role of polygeneration and polystorage in the move toward sustainability
Download or read book Proceedings of the International Conference on Innovations for Sustainable and Responsible Mining written by Xuan-Nam Bui and published by Springer Nature. This book was released on 2020-10-25 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gathers the latest advances, innovations, and applications in the field of mining, geology and geo-spatial technologies, as presented by leading researchers and engineers at the International Conference on Innovations for Sustainable and Responsible Mining (ISRM), held in Hanoi, Vietnam on October 15-17 2020. The contributions cover a diverse range of topics, including mining technology, drilling and blasting engineering, tunneling and geotechnical applications, mineral processing, mine management and economy, environmental risk assessment and management, mining and local development, mined land rehabilitation, water management and hydrogeology, regional Geology and tectonics, spatial engineering for monitoring natural resources and environment change, GIS and remote sensing for natural disaster monitoring, risk mapping and revisualization, natural resources monitoring and management, mine occupational safety and health. Selected by means of a rigorous peer-review process, they will spur novel research directions and foster future multidisciplinary collaborations.
Download or read book Torrefaction of Biomass for Energy Applications written by Leonel JR Nunes and published by Academic Press. This book was released on 2017-11-21 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Torrefaction of Biomass for Energy Applications: From Fundamentals to Industrial Scale explores the processes, technology, end-use, and economics involved in torrefaction at the industrial scale for heat and power generation. Its authors combine their industry experience with their academic expertise to provide a thorough overview of the topic. Starting at feedstock pretreatment, followed by torrefaction processes, the book includes plant design and operation, safety aspects, and case studies focusing on the needs and challenges of the industrial scale. Commercially available technologies are examined and compared, and their economical evaluation and life cycle assessment are covered as well. Attention is also given to non-woody feedstock, alternative applications, derived fuels, recent advances, and expected future developments. For its practical approach, this book is ideal for professionals in the biomass industry, including those in heat and power generation. It is also a useful reference for researchers and graduate students in the area of biomass and biofuels, and for decision makers, policy makers, and analysts in the energy field. Compares efficiency and performance of different commercially available technologies from the practical aspects of daily operation in an industrial scale plant Presents a cost analysis of the production, logistics, and storage of torrefied biomass Includes case studies addressing challenges that may occur in the daily operation in an industrial scale plant Covers other associated technologies, the densification of torrefied biomass, and non-woody feedstock
Download or read book Coupling Power Generation with Syngas Based Chemical Synthesis written by Clemens Forman and published by Springer. This book was released on 2018-06-13 with total page 147 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coupling power generation with syngas-based chemical synthesis according to the so-called ‘Polygeneration-Annex’ concept offers economic and technical benefits. Clemens Forman assesses the integration of incoming streams by the Annex plant from a power plant point of view across its full load range. Analyses are done by load-dependent flowsheet simulation. The pulverized lignite combustion power plant process is covered by two generic technical states: an existing 650 MW(el) power plant and a near future 1,100 MW(el) power plant with duo block design and dry lignite co-firing. Modeling comprises both the flue gas path and the water-steam circuit. Appropriate stream interfaces are identified and determined depending on the load status. The technical feasibility of integration can be proven.
Download or read book Dezentrale Energiesysteme written by Jürgen Karl and published by Walter de Gruyter GmbH & Co KG. This book was released on 2023-12-31 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Coal Liquefaction and Gasification Technologies written by Edward C. Mangold and published by Ann Arbor Science Publishers. This book was released on 1982 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Evaluation of Coal gasification Technology written by National Research Council (U.S.). Ad Hoc Panel on Evaluation of Coal-Gasification Technology and published by . This book was released on 1972 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Clean Coal Technology written by John W. Rich and published by DIANE Publishing. This book was released on 2008-05 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coproduction of power, fuels & chemicals offers an innovative, economically advantageous means of achieving the nation¿s energy goals. Coproduction involves the integration of 3 major building blocks: Gasification of coal or other hydrocarbon fuels to produce synthesis gas (syngas); Conversion of a portion of the syngas to high-value products such as liquid fuels & chemicals; & Combustion of syngas to produce electric power. Contents: Description of Gasification & Power Generation Technology; Syngas Conversion Processes; Industrial Applications of Gasification; Market Potential for Coproduction; Early Entrance Coproduction Plants; Conclusions; Bibliography; Contacts for CCT Projects & U.S. DOE CCT Program. Illustrations.
Download or read book Coal Gasification and Its Applications written by David A. Bell and published by William Andrew. This book was released on 2010-12-08 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Skyrocketing energy costs have spurred renewed interest in coal gasification. Currently available information on this subject needs to be updated, however, and focused on specific coals and end products. For example, carbon capture and sequestration, previously given little attention, now has a prominent role in coal conversion processes.This book approaches coal gasification and related technologies from a process engineering point of view, with topics chosen to aid the process engineer who is interested in a complete, coal-to-products system. It provides a perspective for engineers and scientists who analyze and improve components of coal conversion processes.The first topic describes the nature and availability of coal. Next, the fundamentals of gasification are described, followed by a description of gasification technologies and gas cleaning processes. The conversion of syngas to electricity, fuels and chemicals is then discussed. Finally, process economics are covered. Emphasis is given to the selection of gasification technology based on the type of coal fed to the gasifier and desired end product: E.g., lower temperature gasifiers produce substantial quantities of methane, which is undesirable in an ammonia synthesis feed. This book also reviews gasification kinetics which is informed by recent papers and process design studies by the US Department of Energy and other groups, and also largely ignored by other gasification books.• Approaches coal gasification and related technologies from a process engineering point of view, providing a perspective for engineers and scientists who analyze and improve components of coal conversion processes • Describes the fundamentals of gasification, gasification technologies, and gas cleaning processes • Emphasizes the importance of the coal types fed to the gasifier and desired end products • Covers gasification kinetics, which was largely ignored by other gasification books Provides a perspective for engineers and scientists who analyze and improve components of the coal conversion processes Describes the fundamentals of gasification, gasification technologies, and gas cleaning processes Covers gasification kinetics, which was largely ignored by other gasification books
Download or read book Coal gasification written by United States. Department of Energy. Office of the Assistant Secretary for Environment and published by . This book was released on 1980 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book America s Clean Coal Commitment written by and published by . This book was released on 1987 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt:
