Download or read book Integration Technologies for Industrial Automated Systems written by Richard Zurawski and published by CRC Press. This book was released on 2018-10-03 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: If there exists a single term that summarizes the key to success in modern industrial automation, the obvious choice would be integration. Integration is critical to aligning all levels of an industrial enterprise and to optimizing each stratum in the hierarchy. While many books focus on the technological components of enterprise information systems, Integration Technologies for Industrial Automated Systems is the first book to present a comprehensive picture of the technologies, methodologies, and knowledge used to integrate seamlessly the various technologies underlying modern industrial automation and information systems. In chapters drawn from two of Zurawski's popular works, The Industrial Communication Technology Handbook and The Industrial Information Technology Handbook, this practical guide offers tutorials, surveys, and technology overviews contributed by experts from leading industrial and research institutions from around the world. The book is organized into sections for cohesive and comprehensive treatment. It examines e-technologies, software and IT technologies, communication network-based technologies, agent-based technologies, and security in detail as well as their role in the integration of industrial automated systems. For each of these areas, the contributors discuss emerging trends, novel solutions, and relevant standards. Charting the course toward more responsive and agile enterprise, Integration Technologies for Industrial Automated Systems gives you the tools to make better decisions and develop more integrated systems.

Download or read book Industrial Automation Technologies written by Chanchal Dey and published by CRC Press. This book was released on 2020-05-28 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book begins with an overview of automation history and followed by chapters on PLC, DCS, and SCADA –describing how such technologies have become synonymous in process instrumentation and control. The book then introduces the niche of Fieldbuses in process industries. It then goes on to discuss wireless communication in the automation sector and its applications in the industrial arena. The book also discusses theall-pervading IoT and its industrial cousin,IIoT, which is finding increasing applications in process automation and control domain. The last chapter introduces OPC technology which has strongly emerged as a defacto standard for interoperable data exchange between multi-vendor software applications and bridges the divide between heterogeneous automation worlds in a very effective way. Key features: Presents an overall industrial automation scenario as it evolved over the years Discusses the already established PLC, DCS, and SCADA in a thorough and lucid manner and their recent advancements Provides an insight into today’s industrial automation field Reviews Fieldbus communication and WSNs in the context of industrial communication Explores IIoT in process automation and control fields Introduces OPC which has already carved out a niche among industrial communication technologies with its seamless connectivity in a heterogeneous automation world Dr. Chanchal Dey is Associate Professor in the Department of Applied Physics, Instrumentation Engineering Section, University of Calcutta. He is a reviewer of IEEE, Elsevier, Springer, Acta Press, Sage, and Taylor & Francis Publishers. He has more than 80 papers in international journals and conference publications. His research interests include intelligent process control using conventional, fuzzy, and neuro-fuzzy techniques. Dr. Sunit Kumar Sen is an ex-professor, Department of Applied Physics, Instrumentation Engineering Section, University of Calcutta. He was a coordinator of two projects sponsored by AICTE and UGC, Government of India. He has published around70 papers in international and national journals and conferences and has published three books – the last one was published by CRC Press in 2014. He is a reviewer of Measurement, Elsevier. His field of interest is new designs of ADCs and DACs.

Download or read book Industrial automation and information technology written by Michael Weyrich and published by Springer Vieweg. This book was released on 2024-11-08 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The textbook provides knowledge of automation systems, their components and structures. Aspects of communication and real-time processing as well as the reliability and quality of software and hardware play an important role. Numerous application examples support the learning success.

Download or read book Modern Industrial Automation Software Design written by Lingfeng Wang and published by John Wiley & Sons. This book was released on 2006-01-20 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main subjects in this book relate to software development using cutting-edge technologies for real-world industrial automation applications A hands-on approach to applying a wide variety of emerging technologies to modern industrial practice problems Explains key concepts through clear examples, ranging from simple to more complex problem domains, and all based on real-world industrial problems A useful reference book for practicing engineers as well as an updated resource book for researchers

Download or read book The Industrial Information Technology Handbook written by Richard Zurawski and published by CRC Press. This book was released on 2018-10-03 with total page 1938 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Industrial Information Technology Handbook focuses on existing and emerging industrial applications of IT, and on evolving trends that are driven by the needs of companies and by industry-led consortia and organizations. Emphasizing fast growing areas that have major impacts on industrial automation and enterprise integration, the Handbook covers topics such as industrial communication technology, sensors, and embedded systems. The book is organized into two parts. Part 1 presents material covering new and quickly evolving aspects of IT. Part 2 introduces cutting-edge areas of industrial IT. The Handbook presents material in the form of tutorials, surveys, and technology overviews, combining fundamentals and advanced issues, with articles grouped into sections for a cohesive and comprehensive presentation. The text contains 112 contributed reports by industry experts from government, companies at the forefront of development, and some of the most renowned academic and research institutions worldwide. Several of the reports on recent developments, actual deployments, and trends cover subject matter presented to the public for the first time.

Download or read book Innovations in the Industrial Internet of Things IIoT and Smart Factory written by Goundar, Sam and published by IGI Global. This book was released on 2021-01-22 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial internet of things (IIoT) is changing the face of industry by completely redefining the way stakeholders, enterprises, and machines connect and interact with each other in the industrial digital ecosystem. Smart and connected factories, in which all the machinery transmits real-time data, enable industrial data analytics for improving operational efficiency, productivity, and industrial processes, thus creating new business opportunities, asset utilization, and connected services. IIoT leads factories to step out of legacy environments and arcane processes towards open digital industrial ecosystems. Innovations in the Industrial Internet of Things (IIoT) and Smart Factory is a pivotal reference source that discusses the development of models and algorithms for predictive control of industrial operations and focuses on optimization of industrial operational efficiency, rationalization, automation, and maintenance. While highlighting topics such as artificial intelligence, cyber security, and data collection, this book is ideally designed for engineers, manufacturers, industrialists, managers, IT consultants, practitioners, students, researchers, and industrial industry professionals.

Download or read book Industrial Automation Hands On written by Frank Lamb and published by McGraw Hill Professional. This book was released on 2013-07-22 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical guide to industrial automation concepts, terminology, and applications Industrial Automation: Hands-On is a single source of essential information for those involved in the design and use of automated machinery. The book emphasizes control systems and offers full coverage of other relevant topics, including machine building, mechanical engineering and devices, manufacturing business systems, and job functions in an industrial environment. Detailed charts and tables serve as handy design aids. This is an invaluable reference for novices and seasoned automation professionals alike. COVERAGE INCLUDES: * Automation and manufacturing * Key concepts used in automation, controls, machinery design, and documentation * Components and hardware * Machine systems * Process systems and automated machinery * Software * Occupations and trades * Industrial and factory business systems, including Lean manufacturing * Machine and system design * Applications

Download or read book The Digital Shopfloor Industrial Automation in the Industry 4 0 Era written by John Soldatos and published by CRC Press. This book was released on 2022-09-01 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: In today’s competitive global environment, manufacturers are offered with unprecedented opportunities to build hyper-efficient and highly flexible plants, towards meeting variable market demand, while at the same time supporting new production models such as make-to-order (MTO), configure-to-order (CTO) and engineer-to-order (ETO). During the last couple of years, the digital transformation of industrial processes is propelled by the emergence and rise of the fourth industrial revolution (Industry4.0). The latter is based on the extensive deployment of Cyber-Physical Production Systems (CPPS) and Industrial Internet of Things (IIoT) technologies in the manufacturing shopfloor, as well as on the seamless and timely exchange of digital information across supply chain participants. The benefits of Industry 4.0 have been already proven in the scope of pilot and production deployments in a number of different use cases including flexibility in automation, predictive maintenance, zero defect manufacturing and more. Despite early implementations and proof-of-concepts, CPPS/IIoT deployments are still in their infancy for a number of reasons, including:• Manufacturers’ poor awareness about digital manufacturing solutions and their business value potential, as well as the lack of relevant internal CPPS/IIoT knowledge.• The high costs that are associated with the deployment, maintenance and operation of CPPS systems in the manufacturing shopfloors, which are particularly challenging in the case of SME (Small Medium Enterprises) manufacturers that lack the equity capital needed to invest in Industry 4.0.• The time needed to implement CPPS/IIoT and the lack of a smooth and proven migration path from existing OT solutions.• The uncertainty over the business benefits and impacts of IIoT and CPPS technologies, including the lack of proven methods for the techno-economic evaluation of Industry4.0 systems. • Manufacturers’ increased reliance on external integrators, consultants and vendors. • The absence of a well-developed value chain needed to sustain the acceptance of these new technologies for digital automation.In order to alleviate these challenges, three European Commission funded projects (namely H2020 FAR-EDGE (http://www.far-edge.eu/), H2020 DAEDALUS (http://daedalus.iec61499.eu) and H2020 AUTOWARE (http://www.autoware-eu.org/)) have recently joined forces towards a “Digital Shopfloor Alliance”. The Alliance aims at providing leading edge and standards based digital automation solutions, along with guidelines and blueprints for their effective deployment, validation and evaluation. The present book provides a comprehensive description of some of the most representative solutions that offered by these three projects, along with the ways these solutions can be combined in order to achieve multiplier effects and maximize the benefits of their use. The presented solutions include standards-based digital automation solutions, following different deployment paradigms, such as cloud and edge computing systems. Moreover, they also comprise a rich set of digital simulation solutions, which are explored in conjunction with the H2020 MAYA project (http://www.maya-euproject.com/). The latter facilitate the testing and evaluation of what-if scenarios at low risk and cost, but also without disrupting shopfloor operations. As already outlined, beyond leading edge scientific and technological development solutions, the book comprises a rich set of complementary assets that are indispensable to the successful adoption of IIoT/CPPS in the shopfloor. The book is structured in three parts as follows: • The first part of the book is devoted to digital automation platforms. Following an introduction to Industry 4.0 in general and digital automation platforms in particular, this part presents the digital automation platforms of the FAR-EDGE, AUTOWARE and DAEDALUS projects. • The second part of the book focuses on the presentation of digital simulation and digital twins’ functionalities. These include information about the models that underpin digital twins, as well as the simulators that enable experimentation with these processes over these digital models. • The third part of the book provides information about complementary assets and supporting services that boost the adoption of digital automation functionalities in the Industry4.0 era. Training services, migration services and ecosystem building services are discussed based on the results of the three projects of the Digital Shopfloor Alliance. The target audience of the book includes:• Researchers in the areas of Digital Manufacturing and more specifically in the areas of digital automation and simulation, who wish to be updated about latest Industry4.0 developments in these areas.• Manufacturers, with an interest in the next generation of digital automation solutions based on Cyber-Physical systems.• Practitioners and providers of Industrial IoT solutions, which are interested in the implementation of use cases in automation, simulation and supply chain management.• Managers wishing to understand technologies and solutions that underpin Industry4.0, along with representative applications in the shopfloor and across the supply chain.

Download or read book Overview of Industrial Process Automation written by K.L.S. Sharma and published by Elsevier. This book was released on 2016-10-25 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Overview of Industrial Process Automation, Second Edition, introduces the basics of philosophy, technology, terminology, and practices of modern automation systems through the presentation of updated examples, illustrations, case studies, and images. This updated edition adds new developments in the automation domain, and its reorganization of chapters and appendixes provides better continuity and seamless knowledge transfer. Manufacturing and chemical engineers involved in factory and process automation, and students studying industrial automation will find this book to be a great, comprehensive resource for further explanation and study. - Presents a ready made reference that introduces all aspects of automation technology in a single place with day-to-day examples - Provides a basic platform for the understanding of industry literature on automation products, systems, and solutions - Contains a guided tour of the subject without the requirement of any previous knowledge on automation - Includes new topics, such as factory and process automation, IT/OT Integration, ISA 95, Industry 4.0, IoT, etc., along with safety systems in process plants and machines

Download or read book Industrial Process Automation Systems written by B.R. Mehta and published by Butterworth-Heinemann. This book was released on 2014-11-26 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Process Automation Systems: Design and Implementation is a clear guide to the practicalities of modern industrial automation systems. Bridging the gap between theory and technician-level coverage, it offers a pragmatic approach to the subject based on industrial experience, taking in the latest technologies and professional practices.Its comprehensive coverage of concepts and applications provides engineers with the knowledge they need before referring to vendor documentation, while clear guidelines for implementing process control options and worked examples of deployments translate theory into practice with ease.This book is an ideal introduction to the subject for junior level professionals as well as being an essential reference for more experienced practitioners. - Provides knowledge of the different systems available and their applications, enabling engineers to design automation solutions to solve real industry problems - Includes case studies and practical information on key items that need to be considered when procuring automation systems - Written by an experienced practitioner from a leading technology company

Download or read book Recent Advances in Systems Control and Information Technology written by Roman Szewczyk and published by Springer. This book was released on 2016-11-29 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the International Conference on Systems, Control and Information Technologies 2016. It includes research findings from leading experts in the fields connected with INDUSTRY 4.0 and its implementation, especially: intelligent systems, advanced control, information technologies, industrial automation, robotics, intelligent sensors, metrology and new materials. Each chapter offers an analysis of a specific technical problem followed by a numerical analysis and simulation as well as the implementation for the solution of a real-world problem.

Download or read book Forces of Production written by David Noble and published by Routledge. This book was released on 2017-07-12 with total page 749 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on the design and implementation of computer-based automatic machine tools, David F. Noble challenges the idea that technology has a life of its own. Technology has been both a convenient scapegoat and a universal solution, serving to disarm critics, divert attention, depoliticize debate, and dismiss discussion of the fundamental antagonisms and inequalities that continue to beset America. This provocative study of the postwar automation of the American metal-working industry—the heart of a modern industrial economy—explains how dominant institutions like the great corporations, the universities, and the military, along with the ideology of modern engineering shape, the development of technology. Noble shows how the system of "numerical control," perfected at the Massachusetts Institute of Technology (MIT) and put into general industrial use, was chosen over competing systems for reasons other than the technical and economic superiority typically advanced by its promoters. Numerical control took shape at an MIT laboratory rather than in a manufacturing setting, and a market for the new technology was created, not by cost-minded producers, but instead by the U. S. Air Force. Competing methods, equally promising, were rejected because they left control of production in the hands of skilled workers, rather than in those of management or programmers. Noble demonstrates that engineering design is influenced by political, economic, managerial, and sociological considerations, while the deployment of equipment—illustrated by a detailed case history of a large General Electric plant in Massachusetts—can become entangled with such matters as labor classification, shop organization, managerial responsibility, and patterns of authority. In its examination of technology as a human, social process, Forces of Production is a path-breaking contribution to the understanding of this phenomenon in American society.

Download or read book Automation Technology written by Can Akdeniz and published by Can Akdeniz. This book was released on 2019-01-04 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt: Automation is a well-known technology which is widespread and used across the world. With the help of this technology, a lot can be achieved which seems to be a difficult task. It is an overwhelming technology which has a lot to offer to the human race. Automation is popular everywhere and is used in several industries. These industries are also responsible for making the efficient use of the Automation Technology. It is fascinating to understand and know more about this tremendous technology which has not only evolved in the past but has also emerged and enhanced so that it can be a feasible, accessible and useful for everyone. The automation or the automatic system is responsible for making a lot of things easier. The use of automation in the various sectors helps in maintaining the important data, finances etc of an industry. It is a high-profile technique which is responsible for decreasing the need for Manpower. There is a lot more to know and understand about this technology so go on.

Download or read book Overview of Industrial Process Automation written by K.L.S. Sharma and published by Elsevier. This book was released on 2011-08-19 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title teaches beginners the basics of automation, and it is also intended as a guide to teachers and trainers who are introducing the topic.

Download or read book Industrial Automation and Process Control written by Jon Stenerson and published by . This book was released on 2003 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: B> Covers PLCs, process control, sensors, robotics, fluid power, CNC, Lockout/Tagout and safety, and more. Offers such a wide array of topics that readers can use this book as a reference for many different issues in industrial automation. Featuring the greatest breadth and depth of coverage available on the subject, this practical book explores the main topics in industrial automation; and provides a much-needed, understandable discussion of process control. A comprehensive reference for professionals in industrial automation.

Download or read book The Industrial Communication Technology Handbook written by Richard Zurawski and published by CRC Press. This book was released on 2005-02-23 with total page 938 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Industrial Communication Technology Handbook focuses on current and newly emerging communication technologies and systems that are evolving in response to the needs of industry and the demands of industry-led consortia and organizations. Organized into two parts, the text first summarizes the basics of data communications and IP networks, then presents a comprehensive overview of the field of industrial communications. This book extensively covers the areas of fieldbus technology, industrial Ethernet and real-time extensions, wireless and mobile technologies in industrial applications, the linking of the factory floor with the Internet and wireless fieldbuses, network security and safety, automotive applications, automation and energy system applications, and more. The Handbook presents material in the form of tutorials, surveys, and technology overviews, combining fundamentals and advanced issues with articles grouped into sections for a cohesive and comprehensive presentation. The text contains 42 contributed articles by experts from industry and industrial research establishments at the forefront of development, and some of the most renowned academic institutions worldwide. It analyzes content from an industrial perspective, illustrating actual implementations and successful technology deployments.

Download or read book Plant IT written by Dennis L. Brandl and published by Momentum Press. This book was released on 2012-11-14 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Information Technology (IT) is an important element of plant floor operations and Dennis Brandl’s monthly column on Manufacturing IT in Control Engineering magazine covers IT aspects that are critical to modern manufacturing. This book expands on the magazine’s explanations of the concepts and tools needed to achieve higher manufacturing productivity and efficiencies. Written for manufacturing professionals, the book overviews the wide range of IT elements underlying the manufacturing IT environment. It provides you with the information to be conversant in IT elements and to effectively manage and participate in manufacturing IT projects. Each chapter of the book discusses an IT issue that is important to a manufacturing company, including practical programming, real-world design considerations, databases and master data management, knowledge management, tools and programming languages, cyber security, managing resource information and regulations. And because software engineering is a foundation for all IT elements, this book also provides important points about software engineering and software project management for non-software engineers who must manage or participate in IT projects. Familiarity with all these topics will help you facilitate cooperation between manufacturing and IT professionals to achieve more effective implementations of plant floor operations IT— resulting in increased production productivity and product quality.