Download or read book Radiation Source Use and Replacement written by National Research Council and published by National Academies Press. This book was released on 2008-05-25 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the United States there are several thousand devices containing high-activity radiation sources licensed for use in areas ranging from medical uses such as cancer therapy to safety uses such as testing of structures and industrial equipment. Those radiation sources are licensed by the U.S. Nuclear Regulatory Commission and state agencies. Concerns have been raised about the safety and security of the radiation sources, particularly amid fears that they could be used to create dirty bombs, or radiological dispersal device (RDD). In response to a request from Congress, the U.S. Nuclear Regulatory Commission asked the National Research Council to conduct a study to review the uses of high-risk radiation sources and the feasibility of replacing them with lower risk alternatives. The study concludes that the U.S. government should consider factors such as potential economic consequences of misuse of the radiation sources into its assessments of risk. Although the committee found that replacements of most sources are possible, it is not economically feasible in some cases. The committee recommends that the U.S. government take steps to in the near term to replace radioactive cesium chloride radiation sources, a potential "dirty bomb" ingredient used in some medical and research equipment, with lower-risk alternatives. The committee further recommends that longer term efforts be undertaken to replace other sources. The book presents a number of options for making those replacements.
Download or read book Industrial Application of Radioisotopes written by Gábor Földiák and published by . This book was released on 1986 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Isotopes for Medicine and the Life Sciences written by Institute of Medicine and published by National Academies Press. This book was released on 1995-01-27 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radioactive isotopes and enriched stable isotopes are used widely in medicine, agriculture, industry, and science, where their application allows us to perform many tasks more accurately, more simply, less expensively, and more quickly than would otherwise be possible. Indeed, in many casesâ€"for example, biological tracersâ€"there is no alternative. In a stellar example of "technology transfer" that began before the term was popular, the Department of Energy (DOE) and its predecessors has supported the development and application of isotopes and their transfer to the private sector. The DOE is now at an important crossroads: Isotope production has suffered as support for DOE's laboratories has declined. In response to a DOE request, this book is an intensive examination of isotope production and availability, including the education and training of those who will be needed to sustain the flow of radioactive and stable materials from their sources to the laboratories and medical care facilities in which they are used. Chapters include an examination of enriched stable isotopes; reactor and accelerator-produced radionuclides; partnerships among industries, national laboratories, and universities; and national isotope policy.
Download or read book Radioisotope Gauges for Industrial Process Measurements written by Geir Anton Johansen and published by John Wiley & Sons. This book was released on 2004-10-22 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to fully utilise nucleonic measurement principles and their applications, it is important to have an understanding of the underlying physics. Radioisotope Gauges for Industrial Process Measurements combines theoretical background with practical experience in order to present an accessible overview of the use of radioisotopes in industry. This unique book explains the modes of operation of installed gauges and presents nucleonic methods relevant to measurement problems. The first part of the book deals with radiation sources, the interaction of radiation with matter and radiation detectors. The second part explains the different measurement principles used for industrial gauges and the last part of the book covers industrial applications. This book also: Features a concise introduction to atomic and nuclear physics. Presents a range of nucleonic measurement methods and highlights their application to a variety of problems. Contains an overview of electronics, measurement accuracy, safety and standards. Considers processes and demands, design strategies and practical realisation of measurement systems. Provides many practical engineering examples. Offering a comprehensive coverage of engineering applications, this book is an essential tool for electrical, electronic and instrument engineers in the oil and chemicals processing sectors. It is also a valuable reference to graduate students and physicists involved in nuclear radiation measurement, medical applications, radiochemical research, environmental monitoring and chemical engineering.
Download or read book Industrial Application of Radioisotopes and Radiation Technology written by International Atomic Energy Agency and published by . This book was released on 1982 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Isotopes in Agriculture written by and published by . This book was released on 1958 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Power from Radioisotopes written by Robert L. Mead and published by . This book was released on 1966 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Isotopes and Radiation Technology written by and published by . This book was released on 1964 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Principles and Applications in Nuclear Engineering written by Rehab Abdel Rahman and published by BoD – Books on Demand. This book was released on 2018-09-19 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear engineering could be viewed as the engineering field that ensures optimum and sustainable technological applications of natural and induced radioactive materials in different industrial sectors. This book presents some advanced applications in radiation effects, thermal hydraulics, and radionuclide migration in the environment. These scientific contributions from esteemed experts introduce some nuclear safety principals, current knowledge about radiation types, sources and applications, thermal properties of heat transfer media, and the role of sorption in retarding radionuclide migration in the environment. This book also covers the advances in identifying radiation effects in dense gas-metal systems, application of dense granular materials as high power targets in accelerator driven systems and irradiation facilities, evaluation of boiling heat transfer in narrow channels, and application of fluorescence quenching techniques to monitor uranium migration.
Download or read book Industrial Applications of Sealed Radioactive Sources written by International Atomic Energy Agency and published by . This book was released on 2021-01-30 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In industrial processes, it is useful to have a range of non-intrusive techniques that can effectively 'look' through vessel and pipe walls to measure process parameters and to identify plant problems. Sealed radioactive sources, specifically those that emit gamma radiation and neutron particles, are ideally suited for these purposes and have been used for industrial applications for many years. This publication describes several available techniques with sealed radioactive sources, by showing examples of their use in industrial applications and by demonstrating how they can be used to improve process efficiency and to save money. The focus of the publication corresponds to two major techniques with sealed radioactive sources: gamma scanning and neutron backscattering, which are largely applied for diagnosis and troubleshooting in processing vessels, columns and in pipes.
Download or read book Industrial Radiology written by R. Halmshaw and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial radiography is a well-established non-destructive testing (NDT) method in which the basic principles were established many years ago. However, during 1993-95 the European Standards Organisa tion (CEN) commenced drafting many new standards on NDT including radiographic methods, and when completed these will replace national standards in all the EC member countries. In some cases these standards vary significantly from those in use in the UK at present. These CEN standards are accepted by majority, not unanimous voting, so they will become mandatory even in countries which vote against them. As most are likely to be legal by the time this second edition is published, they are described in the appropriate places in the text. The most important new technical development is the greater use of computers in radiology. In the first edition, computerized tomography was only briefly mentioned at the end of Chapter 11, as it was then largely a medical method with only a few equipments having found a place in industrial use. The method depends on a complex computer program and a large data store. Industrial equipments are now being built, although their spread into industry has been slow. Computer data storage is also being used for radiographic data. Small computers can now store all the data produced by scanning a radiographic film with a small light-spot, and various programs can be applied to these data.
Download or read book The Supply of Medical Isotopes written by and published by . This book was released on 2019 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report explores the main reasons behind the unreliable supply of Technetium-99m (Tc-99m) in health-care systems and policy options to address the issue. Tc-99m is used in 85% of nuclear medicine diagnostic scans performed worldwide – around 30 million patient examinations every year. These scans allow diagnoses of diseases in many parts of the human body, including the skeleton, heart and circulatory system, and the brain. Medical isotopes are subject to radioactive decay and have to be delivered just-in-time through a complex supply chain. However, ageing production facilities and a lack of investment have made the supply of Tc-99m unreliable. This report analyses the use and substitutability of Tc-99m in health care, health-care provider payment mechanisms for scans, and the structure of the supply chain. It concludes that the main reasons for unreliable supply are that production is not economically viable and that the structure of the supply chain prevents producers from charging prices that reflect the full costs of production and supply.
Download or read book Radiation in Medicine written by Institute of Medicine and published by National Academies Press. This book was released on 1996-03-25 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Does radiation medicine need more regulation or simply better-coordinated regulation? This book addresses this and other questions of critical importance to public health and safety. The issues involved are high on the nation's agenda: the impact of radiation on public safety, the balance between federal and state authority, and the cost-benefit ratio of regulation. Although incidents of misadministration are rare, a case in Pennsylvania resulting in the death of a patient and the inadvertent exposure of others to a high dose of radiation drew attention to issues concerning the regulation of ionizing radiation in medicine and the need to examine current regulatory practices. Written at the request from the Nuclear Regulatory Commission (NRC), Radiation in Medicine reviews the regulation of ionizing radiation in medicine, focusing on the NRC's Medical Use Program, which governs the use of reactor-generated byproduct materials. The committee recommends immediate action on enforcement and provides longer term proposals for reform of the regulatory system. The volume covers: Sources of radiation and their use in medicine. Levels of risk to patients, workers, and the public. Current roles of the Nuclear Regulatory Commission, other federal agencies, and states. Criticisms from the regulated community. The committee explores alternative regulatory structures for radiation medicine and explains the rationale for the option it recommends in this volume. Based on extensive research, input from the regulated community, and the collaborative efforts of experts from a range of disciplines, Radiation in Medicine will be an important resource for federal and state policymakers and regulators, health professionals involved in radiation treatment, developers and producers of radiation equipment, insurance providers, and concerned laypersons.
Download or read book Advancing Nuclear Medicine Through Innovation written by National Research Council and published by National Academies Press. This book was released on 2007-09-11 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nearly 20 million nuclear medicine procedures are carried out each year in the United States alone to diagnose and treat cancers, cardiovascular disease, and certain neurological disorders. Many of the advancements in nuclear medicine have been the result of research investments made during the past 50 years where these procedures are now a routine part of clinical care. Although nuclear medicine plays an important role in biomedical research and disease management, its promise is only beginning to be realized. Advancing Nuclear Medicine Through Innovation highlights the exciting emerging opportunities in nuclear medicine, which include assessing the efficacy of new drugs in development, individualizing treatment to the patient, and understanding the biology of human diseases. Health care and pharmaceutical professionals will be most interested in this book's examination of the challenges the field faces and its recommendations for ways to reduce these impediments.
Download or read book Radioisotope Handling Facilities and Automation of Radioisotope Production written by International Atomic Energy Agency and published by IAEA. This book was released on 2004 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dated December 2004
Download or read book Radiation Safety of Accelerator Based Radioisotope Production Facilities written by IAEA and published by International Atomic Energy Agency. This book was released on 2020-08-18 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radioisotopes are used worldwide in a range of medical, industrial, research and academic applications. A large proportion of these radioisotopes are produced in particle accelerators, and the number of institutions that operate linear accelerators or cyclotrons and manufacture and distribute radiopharmaceuticals, for example, is significant and increasing. The production of radioisotopes using particle accelerators poses significant radiation hazards to workers, members of the public, and the environment when accelerators are operated without adequate radiation safety measures. This Safety Guide provides practical guidance for implementing radiation protection and safety measures in such facilities involved in the production and use of radioisotopes.
Download or read book Radiotracer Generators for Industrial Applications written by International Atomic Energy Agency and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a unique source of information pertaining to the development of radiotracer generators and their use in troubleshooting and optimizing industrial processes. The publication describes the results of research undertaken on the characterization of 68Ge/68Ga, 137Cs/137mBa, 99Mo/99mTc and 113Sn/113mIn radiotracer generators.
