Download or read book Industrial and Highway Sensors Technology written by B. Culshaw and published by SPIE-International Society for Optical Engineering. This book was released on 2004 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of SPIE present the original research papers presented at SPIE conferences and other high-quality conferences in the broad-ranging fields of optics and photonics. These books provide prompt access to the latest innovations in research and technology in their respective fields. Proceedings of SPIE are among the most cited references in patent literature.
Download or read book Sensor Technologies and Data Requirements for ITS written by Lawrence A. Klein and published by CABI. This book was released on 2001 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: CD-ROM contains: Adobe Acrobat files for Appendices A-L.
Download or read book ITS Sensors and Architectures for Traffic Management and Connected Vehicles written by Lawrence A. Klein and published by CRC Press. This book was released on 2017-08-07 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: An intelligent transportation system (ITS) offers considerable opportunities for increasing the safety, efficiency, and predictability of traffic flow and reducing vehicle emissions. Sensors (or detectors) enable the effective gathering of arterial and controlled-access highway information in support of automatic incident detection, active transportation and demand management, traffic-adaptive signal control, and ramp and freeway metering and dispatching of emergency response providers. As traffic flow sensors are integrated with big data sources such as connected and cooperative vehicles, and cell phones and other Bluetooth-enabled devices, more accurate and timely traffic flow information can be obtained. The book examines the roles of traffic management centers that serve cities, counties, and other regions, and the collocation issues that ensue when multiple agencies share the same space. It describes sensor applications and data requirements for several ITS strategies; sensor technologies; sensor installation, initialization, and field-testing procedures; and alternate sources of traffic flow data. The book addresses concerns related to the introduction of automated and connected vehicles, and the benefits that systems engineering and national ITS architectures in the US, Europe, Japan, and elsewhere bring to ITS. Sensor and data fusion benefits to traffic management are described, while the Bayesian and Dempster–Shafer approaches to data fusion are discussed in more detail. ITS Sensors and Architectures for Traffic Management and Connected Vehicles suits the needs of personnel in transportation institutes and highway agencies, and students in undergraduate or graduate transportation engineering courses.
Download or read book Sensors for the Highway Transportation System Today and in the Future written by and published by . This book was released on 2015 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sensors for Environment Health and Security written by M.-I. Baraton and published by Springer Science & Business Media. This book was released on 2008-11-25 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: The NATO Advanced Study Institute on “Sensors for Environment, Health and Security: Advanced Materials and Technology” was held in Vichy (France) on September 16–27, 2007 where more than 65 participants, ranging from Ph. D. students to experienced senior scientists, met and exchanged ideas and know-how in a friendly atmosphere. The present book intends to cover the main topics of this NATO ASI through 32 chapters distributed over two parts (Part I: “Materials and Technologies” and Part II: “Applications to Environment, Health and Security”). The scientific programme of the NATO ASI consisted in 28 1-hour lectures given by 14 invited lecturers, 5 additional 1-hour lectures given by seminar speakers, 22 oral presentations by selected ASI participants and a poster session. The programme was divided into four sessions: (1) Advanced materials and technologies; (2) Sensors for environment; (3) Sensors for health; (4) Sensors for security. During the “Advanced Materials and Technologies” session (Part I of the present book), the lectures were dedicated to critical analyses of current methods for the synthesis of materials, nanomaterials (nanoparticles, nanowires, nanotubes, ...) and nanocomposites to be used for the fabrication of sensing devices, mainly semiconductor sensors. Among the synthesis methods, chemical (sol-gel, etc. ) and physical methods (laser deposition, DC magnetron sputtering, etc. ) were discussed. Several lectures addressed characterization techniques and it was concluded that the physical and chemical control of the materials/nanomaterials, including surface chemistry, remains a key issue for the reproducibility of the final device.
Download or read book Industrial Process Sensors written by David M. Scott and published by CRC Press. This book was released on 2018-10-08 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: As manufacturing processes become increasingly complex, industry must rely on advanced sensor technology and process control to improve efficiency and product quality. Processes now need a variety of on-line measurements, such as film thickness, particle size, solids concentrations, and contamination detection. Industrial Process Sensors provides a coherent review of the physical principles, design, and implementation of a wide variety of in-process sensors used to control manufacturing operations. Real data from commercial installations illustrates the operation and limitations of these devices. The book begins with a review of the basic physics of sound, light, electricity, and radiation, with a focus on their role in sensor devices. The author introduces the generic sensor model and discusses the propagation of measurement errors. He goes on to describe conventional process sensors that measure temperature, pressure, level, and flow. The second half of the book focuses on more advanced topics, such as particle size measurement in slurries and emulsions, tomography and process imaging of manufacturing operations, on-line measurement of film thickness, identification of polymer type for recycling, and characterization of reinforced polymers and composites. By exploring both theory and final implementation of sensors used to control industrial manufacturing processes, Industrial Process Sensors provides the information you need to develop solutions to a wide range of industrial measurement needs.
Download or read book Smart Sensors for Industrial Applications written by Krzysztof Iniewski and published by CRC Press. This book was released on 2017-12-19 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sensor technologies are a rapidly growing area of interest in science and product design, embracing developments in electronics, photonics, mechanics, chemistry, and biology. Their presence is widespread in everyday life, where they are used to sense sound, movement, and optical or magnetic signals. The demand for portable and lightweight sensors is relentless in several industries, from consumer electronics to biomedical engineering to the military. Smart Sensors for Industrial Applications brings together the latest research in smart sensors technology and exposes the reader to myriad applications that this technology has enabled. Organized into five parts, the book explores: Photonics and optoelectronics sensors, including developments in optical fibers, Brillouin detection, and Doppler effect analysis. Chapters also look at key applications such as oxygen detection, directional discrimination, and optical sensing. Infrared and thermal sensors, such as Bragg gratings, thin films, and microbolometers. Contributors also cover temperature measurements in industrial conditions, including sensing inside explosions. Magnetic and inductive sensors, including magnetometers, inductive coupling, and ferro-fluidics. The book also discusses magnetic field and inductive current measurements in various industrial conditions, such as on airplanes. Sound and ultrasound sensors, including underwater acoustic modem, vibrational spectroscopy, and photoacoustics. Piezoresistive, wireless, and electrical sensors, with applications in health monitoring, agrofood, and other industries. Featuring contributions by experts from around the world, this book offers a comprehensive review of the groundbreaking technologies and the latest applications and trends in the field of smart sensors.
Download or read book Nanoplasmonic Sensors written by Alexandre Dmitriev and published by Springer Science & Business Media. This book was released on 2012-07-31 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a compendium of the finest research in nanoplasmonic sensing done around the world in the last decade. It describes basic theoretical considerations of nanoplasmons in the dielectric environment, gives examples of the multitude of applications of nanoplasmonics in biomedical and chemical sensing, and provides an overview of future trends in optical and non-optical nanoplasmonic sensing. Specifically, readers are guided through both the fundamentals and the latest research in the two major fields nanoplasmonic sensing is applied to – bio- and chemo-sensing – then given the state-of-the-art recipes used in nanoplasmonic sensing research.
Download or read book Industrial Process Sensors written by David Mark Scott and published by . This book was released on 2008 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: As manufacturing processes become more complex, industry must rely on advanced sensor technology and process control to improve efficiency and product quality. This text explores the physical theory, design, and implementation of sensors used to control manufacturing processes.
Download or read book Industrial Wireless Sensor Networks written by V. Çağrı Güngör and published by CRC Press. This book was released on 2017-12-19 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: The collaborative nature of industrial wireless sensor networks (IWSNs) brings several advantages over traditional wired industrial monitoring and control systems, including self-organization, rapid deployment, flexibility, and inherent intelligent processing. In this regard, IWSNs play a vital role in creating more reliable, efficient, and productive industrial systems, thus improving companies’ competitiveness in the marketplace. Industrial Wireless Sensor Networks: Applications, Protocols, and Standards examines the current state of the art in industrial wireless sensor networks and outlines future directions for research. What Are the Main Challenges in Developing IWSN Systems? Featuring contributions by researchers around the world, this book explores the software and hardware platforms, protocols, and standards that are needed to address the unique challenges posed by IWSN systems. It offers an in-depth review of emerging and already deployed IWSN applications and technologies, and outlines technical issues and design objectives. In particular, the book covers radio technologies, energy harvesting techniques, and network and resource management. It also discusses issues critical to industrial applications, such as latency, fault tolerance, synchronization, real-time constraints, network security, and cross-layer design. A chapter on standards highlights the need for specific wireless communication standards for industrial applications. A Starting Point for Further Research Delving into wireless sensor networks from an industrial perspective, this comprehensive work provides readers with a better understanding of the potential advantages and research challenges of IWSN applications. A contemporary reference for anyone working at the cutting edge of industrial automation, communication systems, and networks, it will inspire further exploration in this promising research area.
Download or read book Automotive Sensors written by John Turner and published by Momentum Press. This book was released on 2009 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will help engineers, technicians, and designers to better understand a wide range of sensors, from those based on piezoelectric phenomena through those for thermal and flow measurement to the directional sensors that can inform the driver of his orientation on the road. Author John Turner, concludes his book with future trends in use of telematic sensing systems for traffic control and traffic automation.
Download or read book Industrial Sensors and Applications for Condition Monitoring written by Philip Wild and published by Wiley-Blackwell. This book was released on 1994 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: The success of the trend towards increased quality and reliabiltiy from production processes with minimal operator supervision depends very much upon the development and application of reliable and accurate sensors. Such systems can increase productivity through the use of extra unmanned shifts, through reduced cycle times and through reduced scrap levels. Industrial sensors are thus of vital importance to industry, and a wide range are currently either in use or undergoing development for future application.
Download or read book Inductive Sensors for Industrial Applications written by Sorin Fericean and published by Artech House. This book was released on 2018-12-31 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical guide provides a comprehensive survey of all relevant inductive sensor classes for industrial applications in a single volume, from automotive use to white goods, covering design, fabrication, implementation, principles and functionality as well as standards and EMC requirements. The book addresses professional engineers and technicians, but is also accessible to students who require a solid basic knowledge of inductive sensors. Each chapter begins with classic, traditional explanations and gradually moves on to state-of- the art analog and digital solutions, including large-scale integrated systems-on-chip, software defined sensors SDS, digital signal synthesis, coils on silicon and active inductors. The book employs three modern analysis methods: analytic computation; popular graphical methods (phasor diagrams, phase plans, Smith charts, etc.) and computer assisted tools, like the electromagnetic field simulator, Maxwell, and the popular Spice simulator for electronic circuits. For traditional solutions, the chapters give overviews in tables with computation formulae (including empirical expressions). Numerical examples help the reader consolidate the theoretical knowledge gained. Concrete examples for currently available commercial parts are provided.
Download or read book Industrial Sensors written by Technical Insights, Inc and published by . This book was released on 1985 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Industrial Control Technology written by Peng Zhang and published by William Andrew. This book was released on 2008-08-12 with total page 891 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook gives comprehensive coverage of all kinds of industrial control systems to help engineers and researchers correctly and efficiently implement their projects. It is an indispensable guide and references for anyone involved in control, automation, computer networks and robotics in industry and academia alike. Whether you are part of the manufacturing sector, large-scale infrastructure systems, or processing technologies, this book is the key to learning and implementing real time and distributed control applications. It covers working at the device and machine level as well as the wider environments of plant and enterprise. It includes information on sensors and actuators; computer hardware; system interfaces; digital controllers that perform programs and protocols; the embedded applications software; data communications in distributed control systems; and the system routines that make control systems more user-friendly and safe to operate. This handbook is a single source reference in an industry with highly disparate information from myriad sources. - Helps engineers and researchers correctly and efficiently implement their projects - An indispensable guide and references for anyone involved in control, automation, computer networks and robotics - Equally suitable for industry and academia
Download or read book Handbook of Intelligent Sensors for Industrial Automation written by Nello Zuech and published by Addison Wesley Publishing Company. This book was released on 1992 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Neural Networks ISNN 2009 written by Wen Yu and published by Springer Science & Business Media. This book was released on 2009-05-08 with total page 1278 pages. Available in PDF, EPUB and Kindle. Book excerpt: The three volume set LNCS 5551/5552/5553 constitutes the refereed proceedings of the 6th International Symposium on Neural Networks, ISNN 2009, held in Wuhan, China in May 2009. The 409 revised papers presented were carefully reviewed and selected from a total of 1.235 submissions. The papers are organized in 20 topical sections on theoretical analysis, stability, time-delay neural networks, machine learning, neural modeling, decision making systems, fuzzy systems and fuzzy neural networks, support vector machines and kernel methods, genetic algorithms, clustering and classification, pattern recognition, intelligent control, optimization, robotics, image processing, signal processing, biomedical applications, fault diagnosis, telecommunication, sensor network and transportation systems, as well as applications.
