Download or read book Induction Motors written by Adel El-Shahat and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Induction Motors Recent Advances New Perspectives and Applications written by Adel El-Shahat and published by BoD – Books on Demand. This book was released on 2023-09-13 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: The induction motor is one of the most significant innovations in contemporary history and it officially kicked off the Second Industrial Revolution by significantly enhancing energy generation efficiency. Induction motors are utilized in a wide variety of applications in the modern industrial world. Motivated by the importance of recent advances, new perspectives, and applications of induction motors, this book presents research from distinguished experts in the field. It addresses recent advances in induction motors, optimal solutions in field-oriented control, the association of converters to induction motors, dynamic analysis, optimized design of synergetic control, fault-tolerant control, mathematical modeling, an adaptive system scheme for a sensorless drive, modeling, and simulation of a system with inter-turn faults, sensorless speed observer for industrial drives, and induction motor applications in electric vehicles. This book is useful for undergraduates, graduate students, researchers, professors, and field engineers due to its combination of both theoretical coverage and real-world application concepts.
Download or read book Propulsion Systems Recent Advances New Perspectives and Applications written by Longbiao Li and published by BoD – Books on Demand. This book was released on 2023-10-11 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Propulsion systems play an important role in civil and military applications. New designs, new materials, and new technologies have already been applied to propulsion systems to improve power and decrease energy consumption. This book focuses on the recent progress in propulsion system development for different applications in fields such as aerospace and marine industries, as well as for high-speed trains and other vehicles.
Download or read book New Perspectives and Applications of Modern Control Theory written by Julio B. Clempner and published by Springer. This book was released on 2017-09-30 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited monograph contains research contributions on a wide range of topics such as stochastic control systems, adaptive control, sliding mode control and parameter identification methods. The book also covers applications of robust and adaptice control to chemical and biotechnological systems. This collection of papers commemorates the 70th birthday of Dr. Alexander S. Poznyak.
Download or read book Induction Motors written by Raúl Gregor and published by BoD – Books on Demand. This book was released on 2015-11-18 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: AC motors play a major role in modern industrial applications. Squirrel-cage induction motors (SCIMs) are probably the most frequently used when compared to other AC motors because of their low cost, ruggedness, and low maintenance. The material presented in this book is organized into four sections, covering the applications and structural properties of induction motors (IMs), fault detection and diagnostics, control strategies, and the more recently developed topology based on the multiphase (more than three phases) induction motors. This material should be of specific interest to engineers and researchers who are engaged in the modeling, design, and implementation of control algorithms applied to induction motors and, more generally, to readers broadly interested in nonlinear control, health condition monitoring, and fault diagnosis.
Download or read book Recent Advances in Robust Control written by Andreas Müller and published by BoD – Books on Demand. This book was released on 2011-11-21 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robust control has been a topic of active research in the last three decades culminating in H_2/H_\infty and \mu design methods followed by research on parametric robustness, initially motivated by Kharitonov's theorem, the extension to non-linear time delay systems, and other more recent methods. The two volumes of Recent Advances in Robust Control give a selective overview of recent theoretical developments and present selected application examples. The volumes comprise 39 contributions covering various theoretical aspects as well as different application areas. The first volume covers selected problems in the theory of robust control and its application to robotic and electromechanical systems. The second volume is dedicated to special topics in robust control and problem specific solutions. Recent Advances in Robust Control will be a valuable reference for those interested in the recent theoretical advances and for researchers working in the broad field of robotics and mechatronics.
Download or read book Emerging Electric Machines written by Ahmed F. Zobaa and published by BoD – Books on Demand. This book was released on 2021-06-09 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an introduction to the concepts and developments of emerging electric machines, including advances, perspectives, and selected applications. It is a helpful tool for practicing engineers concerned with emerging electric machines and their challenges and potential uses. Chapters cover such topics as electric machines with axial magnetic flux, asynchronous machines with dual power supply, new designs for electrical machines, and more.
Download or read book Electric and Hybrid Vehicles written by Iqbal Husain and published by CRC Press. This book was released on 2021-02-22 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thoroughly revised third edition of this widely praised, bestselling textbook presents a comprehensive systems-level perspective of electric and hybrid vehicles with emphasis on technical aspects, mathematical relationships and basic design guidelines. The emerging technologies of electric vehicles require the dedication of current and future engineers, so the target audience for the book is the young professionals and students in engineering eager to learn about the area. The book is concise and clear, its mathematics are kept to a necessary minimum and it contains a well-balanced set of contents of the complex technology. Engineers of multiple disciplines can either get a broader overview or explore in depth a particular aspect of electric or hybrid vehicles. Additions in the third edition include simulation-based design analysis of electric and hybrid vehicles and their powertrain components, particularly that of traction inverters, electric machines and motor drives. The technology trends to incorporate wide bandgap power electronics and reduced rare-earth permanent magnet electric machines in the powertrain components have been highlighted. Charging stations are a critical component for the electric vehicle infrastructure, and hence, a chapter on vehicle interactions with the power grid has been added. Autonomous driving is another emerging technology, and a chapter is included describing the autonomous driving system architecture and the hardware and software needs for such systems. The platform has been set in this book for system-level simulations to develop models using various softwares used in academia and industry, such as MATLAB®/Simulink, PLECS, PSIM, Motor-CAD and Altair Flux. Examples and simulation results are provided in this edition using these software tools. The third edition is a timely revision and contribution to the field of electric vehicles that has reached recently notable markets in a more and more environmentally sensitive world.
Download or read book Applied Intelligent Control of Induction Motor Drives written by Tze Fun Chan and published by John Wiley & Sons. This book was released on 2011-01-19 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Induction motors are the most important workhorses in industry. They are mostly used as constant-speed drives when fed from a voltage source of fixed frequency. Advent of advanced power electronic converters and powerful digital signal processors, however, has made possible the development of high performance, adjustable speed AC motor drives. This book aims to explore new areas of induction motor control based on artificial intelligence (AI) techniques in order to make the controller less sensitive to parameter changes. Selected AI techniques are applied for different induction motor control strategies. The book presents a practical computer simulation model of the induction motor that could be used for studying various induction motor drive operations. The control strategies explored include expert-system-based acceleration control, hybrid-fuzzy/PI two-stage control, neural-network-based direct self control, and genetic algorithm based extended Kalman filter for rotor speed estimation. There are also chapters on neural-network-based parameter estimation, genetic-algorithm-based optimized random PWM strategy, and experimental investigations. A chapter is provided as a primer for readers to get started with simulation studies on various AI techniques. Presents major artificial intelligence techniques to induction motor drives Uses a practical simulation approach to get interested readers started on drive development Authored by experienced scientists with over 20 years of experience in the field Provides numerous examples and the latest research results Simulation programs available from the book's Companion Website This book will be invaluable to graduate students and research engineers who specialize in electric motor drives, electric vehicles, and electric ship propulsion. Graduate students in intelligent control, applied electric motion, and energy, as well as engineers in industrial electronics, automation, and electrical transportation, will also find this book helpful. Simulation materials available for download at www.wiley.com/go/chanmotor
Download or read book Induction Machines Handbook written by Ion Boldea and published by CRC Press. This book was released on 2020-11-19 with total page 903 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third edition of Induction Machines Handbook comprises two volumes, Induction Machines Handbook: Steady State Modeling and Performance and Induction Machines Handbook: Transients, Control Principles, Design and Testing. The promise of renewable (hydro and wind) energy via cage-rotor and doubly fed variable speed generators e-transport propulsion, i-home appliances makes this third edition state of the art tool, conceived with numerous case studies, timely for both Academia and Industry. The first volume offers a thorough treatment of steady state modeling and performance of induction machines, the most used electric motors (generators) in rather constant or variable speed drives for even lower energy consumption and higher productivity in basically all industries, from home appliances, through robotics to e-transport and wind energy conversion. The second volume presents a practical up to date treatment of intricate issues with induction machine (IM) required for design and testing both in rather constant and variable speed (with power electronics) drives. It contains ready to use in industrial design and testing knowledge with numerous case studies to facilitate thorough assimilation of new knowledge.
Download or read book Wireless Power Transfer written by Mohamed Zellagui and published by BoD – Books on Demand. This book was released on 2021-08-18 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wireless power transfer (WPT) is a promising technology used to transfer electric energy from a transmitter to a receiver wirelessly without wires through various methods and technologies using time-varying electric, magnetic, or electromagnetic fields. It is an attractive solution for many industrial applications due to its many benefits over wired connections. This book discusses the theory and practical aspects of WPT technology.
Download or read book Electrical World written by and published by . This book was released on 1926 with total page 1824 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book AC Electric Motors Control written by Fouad Giri and published by John Wiley & Sons. This book was released on 2013-03-25 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: The complexity of AC motor control lies in the multivariable and nonlinear nature of AC machine dynamics. Recent advancements in control theory now make it possible to deal with long-standing problems in AC motors control. This text expertly draws on these developments to apply a wide range of model-based control designmethods to a variety of AC motors. Contributions from over thirty top researchers explain how modern control design methods can be used to achieve tight speed regulation, optimal energetic efficiency, and operation reliability and safety, by considering online state variable estimation in the absence of mechanical sensors, power factor correction, machine flux optimization, fault detection and isolation, and fault tolerant control. Describing the complete control approach, both controller and observer designs are demonstrated using advanced nonlinear methods, stability and performance are analysed using powerful techniques, including implementation considerations using digital computing means. Other key features: • Covers the main types of AC motors including triphase, multiphase, and doubly fed induction motors, wound rotor, permanent magnet, and interior PM synchronous motors • Illustrates the usefulness of the advanced control methods via industrial applications including electric vehicles, high speed trains, steel mills, and more • Includes special focus on sensorless nonlinear observers, adaptive and robust nonlinear controllers, output-feedback controllers, fault detection and isolation algorithms, and fault tolerant controllers This comprehensive volume provides researchers and designers and R&D engineers with a single-source reference on AC motor system drives in the automotive and transportation industry. It will also appeal to advanced students in automatic control, electrical, power systems, mechanical engineering and robotics, as well as mechatronic, process, and applied control system engineers.
Download or read book Current Signature Analysis for Condition Monitoring of Cage Induction Motors written by William T. Thomson and published by John Wiley & Sons. This book was released on 2017-01-24 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides coverage of Motor Current Signature Analysis (MCSA) for cage induction motors This book is primarily for industrial engineers. It has 13 chapters and contains a unique data base of 50 industrial case histories on the application of MCSA to diagnose broken rotor bars or unacceptable levels of airgap eccentricity in cage induction motors with ratings from 127 kW (170 H.P.) up to 10,160 kW (13,620 H.P.). There are also unsuccessful case histories, which is another unique feature of the book. The case studies also illustrate the effects of mechanical load dynamics downstream of the motor on the interpretation of current signatures. A number of cases are presented where abnormal operation of the driven load was diagnosed. Chapter 13 presents a critical appraisal of MCSA including successes, failures and lessons learned via industrial case histories. The case histories are presented in a step by step format, with predictions and outcomes supported by current spectra and photographic evidence to confirm a correct or incorrect diagnosis The case histories are presented in detail so readers fully understand the diagnosis The authors have 108 years of combined experience in the installation, maintenance, repair, design, manufacture, operation and condition monitoring of SCIMs There are 10 questions at the end of chapters 1 to 12 and answers can be obtained via the publisher Current Signature Analysis for Condition Monitoring of Cage Induction Motors serves as a reference for professional engineers, head electricians and technicians working with induction motors. To obtain the solutions manual for this book, please send an email to [email protected]. William T. Thomson is Director and Consultant with EM Diagnostics Ltd, in Scotland. Prof. Thomson received a BSc (Hons) in Electrical Engineering in 1973 and an MSc in 1977 from the University of Strathclyde. He has published 72 papers on condition monitoring of induction motors in a variety of engineering journals such as IEEE Transactions (USA), IEE Proceedings (UK), and also at numerous International IEEE and IEE conferences. He is a senior member of the IEEE, a fellow of the IEE (IET) in the UK and a Chartered Professional Engineer registered in the UK. Ian Culbert was a Rotating Machines Specialist at Iris Power Qualitrol since April 2002 until his very untimely death on 8th September, 2015. At this company he provided consulting services to customers, assisted in product development, trained sales and field service staff and reviewed stator winding partial discharge reports. He has co-authored two books on electrical machine insulation design, evaluation, aging, testing and repair and was principal author of a number of Electric Power Research Institute reports on motor repair. Ian was a Registered Professional Engineer in the Province of Ontario, Canada and a Senior Member of IEEE.
Download or read book Vector Control of Three Phase AC Machines written by Nguyen Phung Quang and published by Springer. This book was released on 2015-05-14 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the vector control of three-phase AC machines, in particular induction motors with squirrel-cage rotors (IM), permanent magnet synchronous motors (PMSM) and doubly-fed induction machines (DFIM), from a practical design and development perspective. The main focus is on the application of IM and PMSM in electrical drive systems, where field-orientated control has been successfully established in practice. It also discusses the use of grid-voltage oriented control of DFIMs in wind power plants. This second, enlarged edition includes new insights into flatness-based nonlinear control of IM, PMSM and DFIM. The book is useful for practitioners as well as development engineers and designers in the area of electrical drives and wind-power technology. It is a valuable resource for researchers and students.
Download or read book Electric Machines for Smart Grids Applications written by Adel El-Shahat and published by BoD – Books on Demand. This book was released on 2018-12-12 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, highly qualified scientists present their recent research motivated by the importance of electric machines. It addresses advanced studies for high-speed electrical machine design, mechanical design of rotors with surface-mounted permanent magnets, design of motor drive for brushless DC motor, single-phase motors for household applications, battery electric propulsion systems for competition racing applications, robust diagnosis by observer using the bond graph approach, a DC motor simulator based on virtual instrumentation, start-up of a PID fuzzy logic embedded control system for the speed of a DC motor using LabVIEW, advanced control of the permanent magnet synchronous motor and optimization of fuzzy logic controllers by particle swarm optimization to increase the lifetime in power electronic stages.
Download or read book Current Programs written by and published by . This book was released on 1977 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt:
