Download or read book Induction Motor Fault Diagnosis written by Subrata Karmakar and published by Springer. This book was released on 2016-04-04 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the diagnosis and assessment of the various faults which can occur in a three phase induction motor, namely rotor broken-bar faults, rotor-mass unbalance faults, stator winding faults, single phasing faults and crawling. Following a brief introduction, the second chapter describes the construction and operation of an induction motor, then reviews the range of known motor faults, some existing techniques for fault analysis, and some useful signal processing techniques. It includes an extensive literature survey to establish the research trends in induction motor fault analysis. Chapters three to seven describe the assessment of each of the five primary fault types. In the third chapter the rotor broken-bar fault is discussed and then two methods of diagnosis are described; (i) diagnosis of the fault through Radar analysis of stator current Concordia and (ii) diagnosis through envelope analysis of motor startup current using Hilbert and Wavelet Transforms. In chapter four, rotor-mass unbalance faults are assessed, and diagnosis of both transient and steady state stator current has been analyzed using different techniques. If both rotor broken-bar and rotor-mass unbalance faults occur simultaneously then for identification an algorithm is provided in this chapter. Chapter five considers stator winding faults and five different analysis techniques, chapter six covers diagnosis of single phasing faults, and chapter seven describes crawling and its diagnosis. Finally, chapter eight focuses on fault assessment, and presents a summary of the book together with a discussion of prospects for future research on fault diagnosis.
Download or read book Fault Diagnosis of Induction Motors written by Jawad Faiz and published by IET. This book was released on 2017-08-29 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive, structural approach to fault diagnosis strategy. The different fault types, signal processing techniques, and loss characterisation are addressed in the book. This is essential reading for work with induction motors for transportation and energy.
Download or read book Condition Monitoring and Faults Diagnosis of Induction Motors written by Nordin Saad and published by CRC Press. This book was released on 2018-07-11 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers various issues related to machinery condition monitoring, signal processing and conditioning, instrumentation and measurements, faults for induction motors failures, new trends in condition monitoring, and the fault identification process using motor currents electrical signature analysis. It aims to present a new non-invasive and non-intrusive condition monitoring system, which has the capability to detect various defects in induction motor at incipient stages within an arbitrary noise conditions. The performance of the developed system has been analyzed theoretically and experimentally under various loading conditions of the motor. Covers current and new approaches applied to fault diagnosis and condition monitoring. Integrates concepts and practical implementation of electrical signature analysis. Utilizes LabVIEW tool for condition monitoring problems. Incorporates real-world case studies. Paves way a technology potentially for prescriptive maintenance via IIoT.
Download or read book Technological Innovation for the Internet of Things written by Luis M. Camarinha-Matos and published by Springer. This book was released on 2013-04-15 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 4th IFIP WG 5.5/SOCOLNET Doctoral Conference on Computing, Electrical and Industrial Systems, DoCEIS 2013, held in Costa de Caparica, Portugal, in April 2013. The 69 revised full papers were carefully reviewed and selected from numerous submissions. They cover a wide spectrum of topics ranging from collaborative enterprise networks to microelectronics. The papers are organized in the following topical sections: collaborative enterprise networks; service orientation; intelligent computational systems; computational systems; computational systems applications; perceptional systems; robotics and manufacturing; embedded systems and Petri nets; control and decision; integration of power electronics systems with ICT; energy generation; energy distribution; energy transformation; optimization techniques in energy; telecommunications; electronics: devices design; electronics: amplifiers; electronics: RF applications; and electronics: applications.
Download or read book Advanced Condition Monitoring and Fault Diagnosis of Electric Machines written by Irfan, Muhammad and published by IGI Global. This book was released on 2018-09-14 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: The reliability of induction motors is a major requirement in many industrial applications. It is especially important where an unexpected breakdown might result in the interruption of critical services such as military operations, transportation, aviation, and medical applications. Advanced Condition Monitoring and Fault Diagnosis of Electric Machines is a collection of innovative research on various issues related to machinery condition monitoring, signal processing and conditioning, instrumentation and measurements, and new trends in condition monitoring. It also pays special attention to the fault identification process. While highlighting topics including spectral analysis, electrical engineering, and bearing faults, this book is an ideal reference source for electrical engineers, mechanical engineers, researchers, and graduate-level students seeking current research on various methods of maintaining machinery.
Download or read book Condition Monitoring and Faults Diagnosis of Induction Motors written by Nordin Saad and published by CRC Press. This book was released on 2018-07-11 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers various issues related to machinery condition monitoring, signal processing and conditioning, instrumentation and measurements, faults for induction motors failures, new trends in condition monitoring, and the fault identification process using motor currents electrical signature analysis. It aims to present a new non-invasive and non-intrusive condition monitoring system, which has the capability to detect various defects in induction motor at incipient stages within an arbitrary noise conditions. The performance of the developed system has been analyzed theoretically and experimentally under various loading conditions of the motor. Covers current and new approaches applied to fault diagnosis and condition monitoring. Integrates concepts and practical implementation of electrical signature analysis. Utilizes LabVIEW tool for condition monitoring problems. Incorporates real-world case studies. Paves way a technology potentially for prescriptive maintenance via IIoT.
Download or read book Fault diagnosis of induction motor fed by frequency converter The signal signature analysis technique written by Hussain Mahdi and published by GRIN Verlag. This book was released on 2016-08-12 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thesis (M.A.) from the year 2013 in the subject Electrotechnology, Warsaw University of Technology (Electrical Engineering), language: English, abstract: 3-Phase induction motors are widely used as a source of mechanical power for effective operation and low costs. The abnormalities have to be detected in advance to avoid the motor breakdown and the cost associated restrain of plant production. This work discusses current and flux leakage spectral analysis techniques for the diagnosis of broken rotor bars and shortcircuited turns in induction motor fed from different AC sources. In spite of recent development of various types of models toward motor faults diagnosis and examining different problems associated with 3-phase induction motors the signal spectral analysis is considered as one of most important approaches. Most of the models from simple equivalent circuit to more complex d-q and a-b-c models and lastly developed hybrid models are provided for the integration of different forms of current and/or voltage unbalance. Generally, techniques that relate to asymmetry identify asymmetrical motor faults. Frequency converters in many applications feed induction motors. Such applications, which play a major role in industry, are growing at a high rate, allow to use 3-phase induction motor as variable speed applications. This paper proposes application of spectral signature analysis for the detection and diagnosis of abnormal electrical and mechanical conditions, which indicates chosen faults in induction motor fed by frequency converter.
Download or read book Electrical Systems 2 written by Abdenour Soualhi and published by John Wiley & Sons. This book was released on 2020-04-14 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methods of diagnosis and prognosis play a key role in the reliability and safety of industrial systems. Failure diagnosis requires the use of suitable sensors, which provide signals that are processed to monitor features (health indicators) for defects. These features are required to distinguish between operating states, in order to inform the operator of the severity level, or even the type, of a failure. Prognosis is defined as the estimation of a systems lifespan, including how long remains and how long has passed. It also encompasses the prediction of impending failures. This is a challenge that many researchers are currently trying to address. Electrical Systems, a book in two volumes, informs readers of the theoretical solutions to this problem, and the results obtained in several laboratories in France, Spain and further afield. To this end, many researchers from the scientific community have contributed to this book to share their research results.
Download or read book Induction Motor Fault Diagnosis written by Yuri Merizalde and published by . This book was released on 2018-04 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Condition Monitoring Fault Diagnosis and Applications of Induction Motors written by Lindy Ladner and published by Willford Press. This book was released on 2023-09-19 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: An induction motor refers to an alternate current electric motor for which the electric current is required to produce torque in the rotor through electromagnetic induction from the magnetic field of the stator winding. Three phase induction motors play an important role in various industries because of their benefits over other electrical motors. As a result, there is a high demand for their dependable and secure operation. Any breakdowns or faults in the motor might result in longer downtime and can cause significant maintenance and revenue losses, requiring early fault detection for motor protection. Condition monitoring of induction motor is a new technology for detecting potential faults online. It entails taking measurements on a machine, while it is in operating condition for detecting faults. The goal of online condition monitoring is to lower maintenance costs and unexpected failure. This book outlines the applications of induction motors as well as their condition monitoring and fault diagnosis. It will serve as a valuable source of reference for graduate and post graduate students.
Download or read book Electric Machines written by Hamid A. Toliyat and published by CRC Press. This book was released on 2017-12-19 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: With countless electric motors being used in daily life, in everything from transportation and medical treatment to military operation and communication, unexpected failures can lead to the loss of valuable human life or a costly standstill in industry. To prevent this, it is important to precisely detect or continuously monitor the working condition of a motor. Electric Machines: Modeling, Condition Monitoring, and Fault Diagnosis reviews diagnosis technologies and provides an application guide for readers who want to research, develop, and implement a more effective fault diagnosis and condition monitoring scheme—thus improving safety and reliability in electric motor operation. It also supplies a solid foundation in the fundamentals of fault cause and effect. Combines Theoretical Analysis and Practical Application Written by experts in electrical engineering, the book approaches the fault diagnosis of electrical motors through the process of theoretical analysis and practical application. It begins by explaining how to analyze the fundamentals of machine failure using the winding functions method, the magnetic equivalent circuit method, and finite element analysis. It then examines how to implement fault diagnosis using techniques such as the motor current signature analysis (MCSA) method, frequency domain method, model-based techniques, and a pattern recognition scheme. Emphasizing the MCSA implementation method, the authors discuss robust signal processing techniques and the implementation of reference-frame-theory-based fault diagnosis for hybrid vehicles. Fault Modeling, Diagnosis, and Implementation in One Volume Based on years of research and development at the Electrical Machines & Power Electronics (EMPE) Laboratory at Texas A&M University, this book describes practical analysis and implementation strategies that readers can use in their work. It brings together, in one volume, the fundamentals of motor fault conditions, advanced fault modeling theory, fault diagnosis techniques, and low-cost DSP-based fault diagnosis implementation strategies.
Download or read book Induction Motors written by Raúl Gregor and published by BoD – Books on Demand. This book was released on 2015-11-18 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: AC motors play a major role in modern industrial applications. Squirrel-cage induction motors (SCIMs) are probably the most frequently used when compared to other AC motors because of their low cost, ruggedness, and low maintenance. The material presented in this book is organized into four sections, covering the applications and structural properties of induction motors (IMs), fault detection and diagnostics, control strategies, and the more recently developed topology based on the multiphase (more than three phases) induction motors. This material should be of specific interest to engineers and researchers who are engaged in the modeling, design, and implementation of control algorithms applied to induction motors and, more generally, to readers broadly interested in nonlinear control, health condition monitoring, and fault diagnosis.
Download or read book Methodologies Of Using Neural Network And Fuzzy Logic Technologies For Motor Incipient Fault Detection written by Mo-yuen Chow and published by World Scientific. This book was released on 1997-11-26 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Motor monitoring, incipient fault detection, and diagnosis are important and difficult topics in the engineering field. These topics deal with motors ranging from small DC motors used in intensive care units to the huge motors used in nuclear power plants. With proper machine monitoring and fault detection schemes, improved safety and reliability can be achieved for different engineering system operations. The importance of incipient fault detection can be found in the cost saving which can be obtained by detecting potential machine failures before they occur. Non-invasive, inexpensive, and reliable fault detection techniques are often preferred by many engineers. A large number of techniques, such as expert system approaches and vibration analysis, have been developed for motor fault detection purposes. Those techniques have achieved a certain degree of success. However, due to the complexity and importance of the systems, there is a need to further improve existing fault detection techniques.A major key to the success in fault detection is the ability to use appropriate technology to effectively fuse the relevant information to provide accurate and reliable results. The advance in technology will provide opportunities for improving existing fault detection schemes. With the maturing technology of artificial neural network and fuzzy logic, the motor fault detection problem can be solved using an innovative approach based on measurements that are easily accessible, without the need for rigorous mathematical models. This approach can identify and aggregate the relevant information for accurate and reliable motor fault detection. This book will introduce the neccessary concepts of neural network and fuzzy logic, describe the advantages and challenges of using these technologies to solve motor fault detection problems, and discuss several design considerations and methodologies in applying these techniques to motor incipient fault detection.
Download or read book Diagnosis and Fault Tolerant Control written by Mogens Blanke and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents model-based analysis and design methods for fault diagnosis and fault-tolerant control. Architectural and structural models are used to analyse the propagation of the fault through the process, test fault detectability and reveal redundancies that can be used to ensure fault tolerance. Case studies demonstrate the methods presented. The second edition includes new material on reconfigurable control, diagnosis of nonlinear systems, and remote diagnosis, plus new examples and updated bibliography.
Download or read book Fault Diagnosis of Induction Motors written by Jawad Faiz and published by . This book was released on 2017 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive, structural approach to fault diagnosis strategy. The different fault types, signal processing techniques, and loss characterisation are addressed in the book. This is essential reading for work with induction motors for transportation and energy.
Download or read book Vibration Monitoring of Induction Motors written by William T. Thomson and published by Cambridge University Press. This book was released on 2020-12-03 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master the art of vibration monitoring of induction motors with this unique guide to on-line condition assessment and fault diagnosis, building on the author's fifty years of investigative expertise. It includes: *Robust techniques for diagnosing of a wide range of common faults, including shaft misalignment and/or soft foot, rolling element bearing faults, sleeve bearing faults, magnetic and vibrational issues, resonance in vertical motor drives, and vibration and acoustic noise from inverters. *Detailed technical coverage of thirty real-world industrial case studies, from initial vibration spectrum analysis through to fault diagnosis and final strip-down. *An introduction to real-world vibration spectrum analysis for fault diagnosis, and practical guidelines to reduce bearing failure through effective grease management. This definitive book is essential reading for industrial end-users, engineers, and technicians working in motor design, manufacturing, and condition monitoring. It will also be of interest to researchers and graduate students working on condition monitoring.
Download or read book Fault Diagnosis Prognosis and Reliability for Electrical Machines and Drives written by Elias G. Strangas and published by John Wiley & Sons. This book was released on 2021-11-19 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault Diagnosis, Prognosis, and Reliability for Electrical Machines and Drives An insightful treatment of present and emerging technologies in fault diagnosis and failure prognosis In Fault Diagnosis, Prognosis, and Reliability for Electrical Machines and Drives, a team of distinguished researchers delivers a comprehensive exploration of current and emerging approaches to fault diagnosis and failure prognosis of electrical machines and drives. The authors begin with foundational background, describing the physics of failure, the motor and drive designs and components that affect failure and signals, signal processing, and analysis. The book then moves on to describe the features of these signals and the methods commonly used to extract these features to diagnose the health of a motor or drive, as well as the methods used to identify the state of health and differentiate between possible faults or their severity. Fault Diagnosis, Prognosis, and Reliability for Electrical Machines and Drives discusses the tools used to recognize trends towards failure and the estimation of remaining useful life. It addresses the relationships between fault diagnosis, failure prognosis, and fault mitigation. The book also provides: A thorough introduction to the modes of failure, how early failure precursors manifest themselves in signals, and how features extracted from these signals are processed A comprehensive exploration of the fault diagnosis, the results of characterization, and how they used to predict the time of failure and the confidence interval associated with it A focus on medium-sized drives, including induction, permanent magnet AC, reluctance, and new machine and drive types Perfect for researchers and students who wish to study or practice in the rea of electrical machines and drives, Fault Diagnosis, Prognosis, and Reliability for Electrical Machines and Drives is also an indispensable resource for researchers with a background in signal processing or statistics.
